检索结果-内蒙古大学图书馆

Comprehensive Performance Analysis of Steam and Flue Gas Stepwise/Staged Heating Molten Salt Thermal Storage Systems Coupled with Coal-Fired power Plants

SSRN

引用

SSRN 2024年

作者： Jing, Hao Wang, Dengliang Chen, Weixiong Zhao, Yongliang Wang, Chaoyang Zhang, Kezhen Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China Xi’an Thermal Power Research Institute Co. Ltd. Xi’an710054 China

The rapid development of renewable energy has put forward higher requirements for the flexibility and deep peak shaving ability of coal-fired power plants (CFPPs). Molten salt thermal energy storage (TES) is considered a potential solution. In this study, a CFPP coupled steam and flue gas stepwise/staged heating molten salt TES system is proposed. The proportion of steam thermal energy allocated to the molten salt and feed water is adjusted. The thermodynamic and economic performance of two configurations under different thermal load distribution ratios are compared and studied. The results show that with the increase of molten salt thermal load distribution ratio, the thermal storage capacity, denitrification efficiency, and charging exergy loss increase, while the equivalent round-trip efficiency, energy storage density, and discharging exergy loss decrease. When the molten salt thermal load distribution ratio is the same, the stepwise configuration has higher energy storage density and denitrification efficiency, lower charging exergy loss of TES, and better economic performance. The staged configuration has higher thermal storage capacity and lower exergy loss of CFPP. In general, the economic performance of the stepwise configuration is higher, while the staged configuration's thermodynamic performance is higher. © 2024, The Authors. All rights reserved.

关键词： Coal fired power plant

来源：评论

学校读者我要写书评

暂无评论

Analysis of Gas-Cooled Micro Modular Reactor (MMR) Fuel

SSRN

引用

SSRN 2024年

作者： Deng, Chaoqun Zhu, Siyang He, Yanan Wu, Yingwei He, Kai Zhang, Jing Su, Guanghui School of Nuclear Science and Technology Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi’an710049 China China Nuclear Power Engineering Co. Ltd. Beijing100840 China

The gas-cooled micro modular reactor (MMR) is a novel concept with compact fuel form consists of thousands of tri-isotropic fuel (TRISO) particles dispersed in silicon carbide matrix. The MMR fuel is high volume packing fraction and horizontally placed within graphite channels. Due to the complexity of the fuel structure and the challenges involved in simulation, a multi-scale and multi-physics coupled analyses method of MMR fuel was realized in this work by implementing physical models into the open-source finite element platform MOOSE. Though the simulation of the typical design MMR fuel during normal operation, the thermal-mechanical analysis and the failure analysis were conducted. The results show that the arrangement of MMR fuel horizontally within graphite channels resulted in non-uniform gap between the fuel and graphite brick, leading to an "off-center" temperature distribution within the fuel, the peak temperature is about 1314 K. Higher-temperature sub-zones exhibit greater internal pressure within TRISO and show greater tensile stress in the Chemical Vapor Deposited Silicon Carbide (CVD-SiC) layer. Regarding fuel failure analysis, this work found limited impact from Pd penetration and kernel migration. Pressure-induced particle failure, closely linked with stress in CVD-SiC, emerges as the primary failure criterion. The overall probability of fuel failure remains relatively low, with a maximum probability of 4.1×10-5. Statistical data reveals that a significant majority (71%) of TRISO particles exhibit a failure probability below 2×10-5, while only 8.8% reach 4×10-5 © 2024, The Authors. All rights reserved.

关键词： Graphite

来源：评论

学校读者我要写书评

暂无评论

Multi-Objective optimization of oil–gas cyclone separators considering liquid storage in the tank bottom

引用

Separation and Purification Technology 2025年 374卷

作者： Wang, Lingzi Du, Wei Liu, Ruiyi Feng, Jianmei Peng, Xueyuan Cao, Feng School of Energy and Power Engineering Xi'an Jiaotong University Shaanxi Xi'an710049 China The First Gas Plant of PetroChina Changqing Oilfield Company Shaanxi Jingbian718500 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

As an efficient separation device, the gas–liquid cyclone separator has been widely used in oil injection compressor systems. It can effectively reduce the oil content in the high-pressure airflow, directly affecting the fuel consumption, operating efficiency, and exhaust quality parameters of compressors, making it crucial to enhance the separator's performance. Given the critical role of geometric configuration in determining cyclone separator efficiency, this study comprehensively considers several influencing factors including the structure parameters. Taguchi method and analysis of variance (ANOVA) were used to quantify the contribution of three factors to the performance percentage of the separator, and the dual-objective optimization of the efficiency and pressure drop of the separator was carried out with the grey correlation analysis method. In the simulation calculation, this paper employs the DPM-to-VOF method coupled with the Euler wall film (EWF) to simulate the oil droplet particle separation process, featuring model transformation capabilities under specified conditions. The investigation culminates in the development of a parametric-performance prediction model and establishes optimal operational parameters for cyclone separators: the inlet velocity (vin) should be set at 24.49 m/s, the height of the inner cylinder of the separator tank (Ht) should be 1.2 times the diameter, and the buffer height between the inner cylinder and the liquid surface (Hm) should be 0.9 times the diameter. © 2025

关键词： Cyclone separators

来源：评论

学校读者我要写书评

暂无评论

Bacterial Cellulose Composite Solid Polymer Electrolyte With High Tensile Strength and Lithium Dendrite Inhibition for Long Life Battery

引用

Energy & Environmental Materials 2021年第3期4卷 434-443页

作者： Yuhan Li Zongjie Sun Dongyu Liu Shiyao Lu Fei Li Guoxin Gao Min Zhu Mingtao Li Yanfeng Zhang Huaitian Bu Zhiyu Jia Shujiang Ding Department of Applied Chemistry School of ChemistryXi’an Key Laboratory of Sustainable Energy Materials ChemistryMOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed MatterState Key Laboratory of Electrical Insulation and Power EquipmentXi’an Jiaotong UniversityXi’an 710049China International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China Department of Materials and Nanotechnology SINTEF IndustryForskningsveien 1Oslo 0373Norway School of Chemistry and Chemical Engineering MOE Key Laboratory of Cluster ScienceBeijing Institute of TechnologyBeijing 100081China

The development of metallic lithium anode is restrained by lithium dendrite growth during *** solid polymer electrolyte with high mechanical strength and lithium ion conductivity could be applied to inhibit lithium dendrite *** prepare the high-performance solid polymer electrolyte,the environment-friendly and cheap bacterial cellulose(BC)is used as filler incorporating with PEO-based electrolyte owing to good mechanical properties and Li salts ***/Li TFSI/BC composite solid polymer electrolytes(CSPE)are prepared easily by aqueous mixing in *** lithium ion transference number of PEO/Li TFSI/BC CSPE is 0.57,which is higher than PEO/Li TFSI solid polymer electrolyte(SPE)(0.409).The PEO/Li TFSI/BC CSPE exhibits larger tensile strength(4.43 MPa)than PEO/Li TFSI SPE(1.34 MPa).The electrochemical window of composite electrolyte is widened 1.43 V by adding *** functional theory calculations indicate that flex of PEO chains around Li atoms is suppressed,suggesting the enhanced lithium ion *** molecular orbitals results suggest that an unfavorable intermolecular charge transfer lead to achieve higher potential for BC composite *** solid-state Li metal battery with PEO/Li TFSI/BC CSPE delivers longer cycle life for 600 cycles than PEO/Li TFSI SPE battery(50 cycles).Li symmetrical battery using PEO/Li TFSI/BC CSPE could be stable for 1160 h.

关键词： all solid-state battery bacterial cellulose composite polymer electrolyte DFT calculations HOMO and LUMO

来源：评论

学校读者我要写书评

暂无评论

Influence of light-dark cycles on hydrogen production from sugarcane bagasse by Rhodobacter sphaeroides

引用

International Journal of Hydrogen Energy 2025年 145卷 28-35页

作者： Wen Cao Xuan Wei Jiyan Lu Mengyao Li Jiali Feng State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 Shaanxi PR China College of Biology and Oceanography Weifang University Weifang 261061 Shandong PR China Weifang Municipal Key Laboratory of Agricultural Planting Quantization and Application Weifang 261061 Shandong PR China

Photo-fermentative hydrogen production from lignocellulosic biomass offers a clean, efficient, and eco-friendly alternative for energy generation. Large-scale photo-fermentative hydrogen production, ideally conducted under outdoor conditions is influenced by the daily light-dark cycle. This study examines the effect of a 12-h light-dark cycle (12L/12D) on hydrogen production by Rhodobacter sphaeroides HY01 using sugarcane bagasse (SCB), comparing it with continuous light (CL) conditions. The results show that bacterial growth was not significantly affected by the light-dark cycle. The optical density (OD 660 ) of the culture reached 3.25 under 12L/12D and 3.49 under CL. However, total hydrogen yield decreased substantially under the light-dark cycle, from 6020.11 ± 54.71 mL/L in CL to 4242.73 ± 182.03 mL/L in the 12L/12D condition. Additionally, the rate of hydrogen production was higher under CL (119.78 ± 4.82 mL/(L·h)) compared to 12L/12D (60.97 ± 7.27 mL/(L·h)), while the lag phase was shorter under CL, at 17.25 ± 1.04 h, versus 20.37 ± 3.98 h under 12L/12D. Gas chromatography-mass spectrometry (GC-MS) analysis identified lactic acid, butyric acid, and ethanol as the primary soluble metabolites, with ethanol yield under 12L/12D being approximately half of that under CL. Notably, light conversion efficiency (LCE) for hydrogen production was significantly enhanced under the light-dark cycle, showing a 1.36-fold increase compared to CL conditions. These findings not only contribute to the understanding of the influence of light cycles on biohydrogen production but also support the development of more efficient and cost-effective biohydrogen systems for sustainable energy production.

关键词： Light conversion efficiency Light-dark cycle Lignocellulosic biomass Photo fermentation hydrogen production Sugarcane bagasse

来源：评论

学校读者我要写书评

暂无评论

Boosting photocatalytic water vapor splitting by the integration of porous g-C_(3)N_(4)and carbonized melamine foam

引用

Science China Materials 2024年第9期67卷 2957-2964页

作者： Shujian Wang Dongjie Liu Chunyang Zhang Jie Huang Shidong Zhao Kejian Lu Biao Wang Hao Peng Yitao Si Maochang Liu International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an710049China School of Chemistry and Chemical Engineering Southeast UniversityNanjing211189China Suzhou Academy of Xi’an Jiaotong University Suzhou215123China Gree Altairnano New Energy Inc. Zhuhai519040China

We report a photothermally-induced liquid-solid/gas-solid-decoupling photocatalytic water-splitting system,where a carbonized melamine foam(CMF)and a porous g-C_(3)N_(4)(PCN)serve as the photothermal substrate and model photocatalyst,***,liquid water is transformed into the gaseous phase over the CMF due to the photothermal effect,and the generated vapor can be split into hydrogen by PCN via the *** unique biphasic photocatalytic system exhibits a high hydrogen production rate of 368.1µmol h^(-1),which is 2.4 and 25.6 times larger than those of the traditional triphasic PCN system(151.7µmol h^(-1))and g-C_(3)N_(4)(CN)system(14.4µmol h^(-1)),*** improved photocatalytic performance is mainly attributed to the optimized energy and mass transfer at the gas-liquid-solid reaction interface,where gas products are rapidly desorbed in the photocatalytic *** work provides a novel strategy to enhance the photocatalytic performance from the perspectives of energy and mass flow.

关键词： photocatalytic photothermal mass transfer g-C_(3)N_(4) gas-solid

来源：评论

学校读者我要写书评

暂无评论

Improved filtered mesoscale interphase heat transfer model

引用

Particuology 2021年第4期19卷 176-186页

作者： Yu Li Yaxiong Yu Chi Zhang Zheqing Huang Qiang Zhou School of Chemical Engineering and Technology Xi’an Jiao Tong UniversityXi’an 710049China AVIC Xi’an Flight Automatic Control Research Institute Xi’an 710049China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiao Tong UniversityXi’an 710049China

Mesoscale structures that form in gas-solid flows considerably affect interphase heat transfer.A filtered interphase heat transfer model accounts for the effects of unresolved mesoscale structures is required in coarse-grid *** the literature,researchers obtain the filtered interphase heat transfer coefficient using a correction(Q)to the microscopic interphase heat transfer *** models are based on filtered data in the range 01 is *** percentage can reach approximately 20%when the dimensionless filter size is smaller than 1.028(66.7×the particle diameter).We proposed an improved filtered interphase heat transfer model by considering the data in the range Q<0 and Q>*** evaluated the predictive power of our model in an a priori *** model has much better performance than other models when the dimensionless filter size△<8.222.

关键词： Gas-solid flows Two-fluid model Interphase heat transfer Filtered model Mesoscale

来源：评论

学校读者我要写书评

暂无评论

Study on Variable Condition of Large Temperature Differential Heating System With Integrated Ejector Heat Pump

引用

Kung Cheng Je Wu Li Hsueh Pao/Journal of engineering Thermophysics 2022年第4期43卷 863-869页

作者： Wang, Li-Yuan Liu, Ji-Ping Fu, Yue Liu, Ming Yan, Jun-Jie Key Laboratory of Heat Flow Science and Engineering of Ministry of Education Xi'an Jiaotong University Xi'an710049 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

In the case of increasing urban heating demand, reducing the return water temperature of primary heating network can improve the heating capacity and utilize and recycle low-temperature waste heat resources. The ejector heat pump can use the high temperature heat source of the primary heat network to reduce the temperature of the return water, it has the advantages of simple structure, stable and reliable operation. In this paper, a model of ejector heat pump system is established to study the variable operating conditions of ejector heat pump system under central heating regulation. The results show that the ejector heat pump can effectively reduce the primary heat network return water temperature, and the primary network return water temperature can be reduced by 22 degree centigrade under the same primary network water supply temperature. With the increase of water supply temperature of primary network, the temperature of primary network return water, COP of the heat pump system and ejector ejection ratio increase gradually, the exergy efficiency decreases gradually. In the process of heating regulation, with the increases of outdoor temperature, the primary network return water temperature increases continuously, and the exergy efficiency decreases gradually;However, when the outdoor temperature is lower than the local design temperature, the ejector ejection ratio and the COP of the heat pump system decrease sharply. © 2022, Science Press. All right reserved.

关键词： Water temperature

来源：评论

学校读者我要写书评

暂无评论

Evaporation of sub-millimeter flying dinitrogen tetroxide droplet under high temperature and pressure: Experimental measurement and theoretical modeling

引用

Chinese Journal of Aeronautics 2025年第5期 82-93页

作者： Lihan FEI Wu ZHU Yuyuan ZHANG Peng ZHANG Zuohua HUANG Chenglong TANG State Key Laboratory of Multiphase Flow and Power Engineering Xi'an Jiaotong University Department of Mechanical Engineering City University of Hong Kong

The evaporation behaviors are crucial for the flame location estimation in liquid rocketengines. This work, for the first time, experimentally reports the sub-millimeter droplet evaporationcharacteristics of the corrosive dinitrogen tetroxide（NTO, one prevailing hypergolic oxidizer） athigh ambient pressure up to 4.5 MPa. An in-house corrosion-resistant droplet generator is usedto generate isolated flying droplets of sub-millimeter size, which are then exposed in a gas environ-ment with temperatures between 1 010 K and 1 210 K and pressures in the range between 2.0 MPaand 4.5 MPa, provided by an optical rapid compression machine. Parallelly, a theoretical modelconsidering both the droplet ambient convection and the NTO dissociation is developed. Resultsindicate that firstly, the present theoretical model that considers the transient droplet-ambient con-vection as well as the temperature and pressure dependent rate of dissociation shows good agree-ment with the experimentally observed droplet lifetime. In addition, the flying droplets velocityregress gradually due to momentum exchange with the ambient, which is more prominent at higherpressure. The evaporation caused droplet size reduction is consistent with the classical D2-law pre-diction, in the present temperature and pressure range. Finally, higher temperature and pressureaccelerate the evaporation and an empirical correlation for the temperature and pressure dependentevaporation rate constant is proposed, which shows good agreement with experiment and simula-tion results.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Digital twin modeling and fault diagnosis on the feedwater pump system of thermal power plant

Digital twin modeling and fault diagnosis on the feedwater p...

引用

Digital Twins and Parallel Intelligence (DTPI), IEEE International Conference on

作者： Yugang Liu Chi Luo Chen Chen Zhu Wang Ming Liu Clean Combustion and Flue Gas Purification Key Laboratory of Sichuan Province Dongfang Boiler Co. Ltd Chengdu China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

ISBN: (数字)9798350349252

ISBN: (纸本)9798350349269

The high penetration of renewable energy introduces increased volatility into the power system, presenting more challenging peak shaving and frequency modulation missions for thermal power plants that serve as schedulable power sources within the system. Frequent load cycling place higher demands on the operation stability of core power plant equipment and introduce additional safety risks. As the core system of the power cycle, the operational reliability and energy efficiency of the feedwater pump system (FPS) are crucial. Therefore, this paper focuses on the core equipment and parameters of the FPS, developing a digital twin model based on mechanism modeling method and neural network data-driven modeling method. By comparing the mean absolute error, root mean square error, and coefficient of determination of simulation parameters of different modeling methods, digital twin parameters with higher simulation accuracy were obtained. Utilizing these predicted parameters, an FPS fault diagnosis model (FFDM) for the FPS was developed. By calculating comprehensive deviation degree and the contribution of each parameter, fault early warning and source tracing were achieved, providing guidance for the closed-loop control.

关键词： Fault diagnosis Data-driven modeling Neural networks Predictive models power system stability Energy efficiency Digital twins Safety power system reliability power generation

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：