检索结果-内蒙古大学图书馆

Cyclone separation in a supercritical water circulating fluidized bed reactor for coallbiomass gasification： Structural design and numerical analysis

引用

Particuology 2018年第4期16卷 55-67页

作者： Guoxing Li Youjun Lu State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an Shaanxi 710049 China

A new concept of a supercritical water （SCW） circulating fiuidized bed reactor is proposed to produce hydrogen from coal/biomass gasification. The cyclone is a key component of the reactor system, in this paper, cyclones with a single circular inlet （SCI） or a double circular inlet （DCI） were designed to adapt to the supercritical conditions. We evaluated the separation performance of the two cyclones using numerical simulations. A three-dimensional Reynolds stress model was used to simulate the turbulent flow of the fluid, and a stochastic Lagrangian model was used to simulate the particle motion. The flow fields of both cyclones were three-dimensionally unsteady and similar to those of traditional gas-solid cyclones. Secondary circulation phenomena were discovered and their influence on particle separation was estimated. Analyzing the distribution of the turbulence kinetic energy revealed that the most intensive turbulence existed in the zone near the vortex finder while the flow in the central part was relatively stable. The particle concentration distribution was non-uniform because of centrifugal forces. The distribution area can be divided into three parts according to the motion of the particles. In addition, the separation efficiency of both cyclones increased with the inlet SCaN velocity. Because of its perturbance flow, the DCI separator had higher separation efficiency than the SCI separator under comparable simulations. However, this was at the expense of a higher pressure drop across the cyclone.

关键词： CycloneStructural design Supercritical water-solid flow Separation performance Circulating fluidized bed Computational fluid dynamics

来源：评论

学校读者我要写书评

暂无评论

Experimental study on pressure and temperature distribution characteristics of subcritical and supercritical water in vertical flow channel

International Journal of Fluid Engineering

引用

International Journal of Fluid engineering 2024年第4期1卷 56-64页

作者： Hui Jin Huibo Wang Yi Li Petr A.Nikrityuk State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityShaanxi 710049China Mechanical Engineering Department Eindhoven University of TechnologyEindhovenNetherlands Chemical and Materials Engineering Department University of AlbertaEdmontonAlberta T6G 2R3Canada

To enhance knowledge about efficiency improvement and reactor optimization in supercritical water gasification,an experimental system was designed to study the pressure and temperature distribution of subcritical and supercritical water in a channel,representing a simplified continuous *** pressure drop and temperature distribution along and perpendicular to the forced flow are studied by the measure points inserted inside the test *** results show that the pressure drop in the test section is linearly negatively correlated with the average enthalpy of the inlet and outlet,eventually reaching negative values(-0.177 MPa)at high average enthalpy(2300 kJ kg^(-1)).Temperature and specific enthalpy along the flow direction match theoretical estimates,except near the pseudocritical *** subcritical cases,horizontal temperature differences are positively correlated with enthalpy differences and mass flow rates but remain nearly constant in supercritical ***,with fluid temperature rising from the pseudocritical point,the horizontal temperature difference first increases,then decreases,and reaching a peak of 4.29 K at a fluid temperature of 664 *** of the obtained data reveals that the negative correlation and values of the pressure drop are caused by fluid volume ***,fluid volume expansion,near-wall natural convection,and turbulent forced flow fluctuations contribute to horizontal temperature non-uniformity.

关键词： flow distribution channel

来源：评论

学校读者我要写书评

暂无评论

The role of rotary liquid-solid two-phase flow in the synergistic behavior between sand erosion and electrochemical corrosion of Ni2FeCrMo0.2 alloy in marine environment

引用

Process Safety and Environmental Protection 2025年 200卷

作者： Luo, Xingqi Xu, Qipeng Wang, Kai Feng, Jianjun Li, Yanhui Liu, Yan Zhang, Xiya State Key Laboratory of Water Engineering Ecology and Environment in Arid Area Xi'an University of Technology No.5 Jinhua South Road Xi'an710048 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University No.28 Xianning West Road Xi'an710049 China Qinghai Salt Lake Industry Co. Ltd. No.28 Huanghe Road Golmud816000 China

The erosion-corrosion behavior poses a significant threat to marine equipment, driven by complex multi-physics processes such as sand movement, surface erosion, electrochemical reactions, and corrosive ion transport. Aiming at the widely used rotating liquid-solid two-phase flow system in a marine environment, this study investigates the role of flow velocity in the erosion-corrosion behavior of Ni2FeCrMo0.2 alloy. The coupling analysis of multi-component weight loss, electrochemical kinetics, and microstructure characterization clarifies the interactions between fluid flow, sand migration, ion transfer, and damage morphology, revealing the synergistic erosion-corrosion mechanism. The results show that the erosion-corrosion mechanism transfers with flow velocity. At low velocities, the erosion effect on the harder metal matrix is weak due to insufficient kinetic energy of the sand particles. However, the sand-surface impingement on the softer corrosion products and the mass transfer of corrosive ions lead to erosion-enhanced corrosion, which dominates the material damage process. In contrast, at higher velocities, the impact kinetic energy and frequency of sand particles rise, causing the erosion rate to increase exponentially, which surpasses corrosion, making erosion as the dominant damage mechanism at high velocities. These results highlight the critical role of flow velocity in controlling the erosion-corrosion synergy behavior. © 2025 The Institution of Chemical Engineers

关键词： Electrochemical corrosion

来源：评论

学校读者我要写书评

暂无评论

Modulating conductivity type of cuprous oxide（Cu2O） films on copper foil in aqueous solution by comproportionation

引用

Journal of Materials Science & Technology 2019年第8期35卷 1570-1577页

作者： Changwei Tang Xiaohui Ning Jian Li Hui-Lin Guo Ying Yang Shaanxi Provincial Key Laboratory of Electroanalytical Chemistry Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of EducationCollege of Chemistry & Materials ScienceNorthwest UniversityXi'an 710127 China National Demonstration Center for Experimental Chemistry Education Northwest UniversityXi'an 710127 China International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi'an Jiaotong UniversityXi'an 710049 China

Cuprous oxide(Cu2O)is an attractive material for photoelectrochemical(PEC)hydrogen production or photovoltaic application,because of its appropriate band gap,low material cost and *** this paper,Cu2O films were obtained by comproportionation in acid cupric sulfate solutions with varying concentrations of potassium *** and electrochemical experiments,such as zero-bias photocurrent responses,voltammograms,and Mott-Schottky measurements,show that the Cu2O films grown in low(≤0.75 mol dm^–3)and high(≥1.00 mol dm^–3)nitrate ion concentrations presented n-type and p-type conductivity,*** circuit potential and polarization behavior were monitored to investigate the mechanism of modulating conductivity *** ions consume protons in the plating solution during comproportionation with different concentrations of nitrate ions creating different pH at the Cu2O/solution *** gradient leads to the transformation of Cu2Ofilms conductivity changing from n-type to p-type with increasing the concentration of nitrate ions in the plating *** method could be used to fabricate homojunction electrode on metal substrate for PEC hydrogen production or photoelectric application.

关键词： Cuprous oxide(Cu2O) Comproportionation Semiconductor films Tuning conductivity Photoelectrochemical cell

来源：评论

学校读者我要写书评

暂无评论

Ultrafine polycrystalline titania nanofibers for superior sodium storage

引用

Journal of Energy Chemistry 2019年第11期28卷 153-161页

作者： Zhidan Diao Daming Zhao Chunxiao Lv Hongli Liu Dongjiang Yang Shaohua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049ShaanxiChina School of Environmental Science and Engineering Collaborative Innovation Centerfor Marine Biomass FibersMaterials and Textiles of Shandong ProvinceQingdao UniversityQingdao 266071ShandongChina

Sodium ion batteries have a huge potential for large-scale energy storage for the low cost and abundance of sodium resources. In this work, a novel structure of ultrafine polycrystalline TiO2 nanofibers is prepared on nickel foam/carbon cloth by a simple vapor deposition method. The as-prepared TiO2 nanofibers show excellent performance when used as anodes for sodium-ion batteries. Specifically, the TiO2 nanofibers@nickel foam electrode delivers a high reversible capacity of 263.2 m Ahg^-1 at 0.2 C and maintains a considerable capacity of 144.2 m Ahg^-1 at 10 C. The TiO2 nanofibers@carbon cloth electrode also shows excellent high-rate capability, sustaining a capacity of 148 m Ahg^-1 after 20 0 0 cycles at 10 C. It is believed that the novel nanofibrous structure increases the contact area with the electrolyte and greatly shortens the sodium ion diffusion distance, and meanwhile, the polycrystalline nature of nanofibers exposes more intercalation sites for sodium storage. Furthermore, the density functional theory calculations exhibit strong ionic interactions between the exposed TiO2(101) facets and sodium ions, leading to a preferable sodiation/desodiation process. The unique structural features endow the TiO2 nanofibers electrodes great advantages in rapid sodium storage with an outstanding high-rate capability.

关键词： Polycrystalline titania Nanofibers Sodium storage High-rate capability

来源：评论

学校读者我要写书评

暂无评论

Theoretical and experimental analyses of a novel recirculated regenerative rotary desiccant wheel dehumidification system 32

Theoretical and experimental analyses of a novel recirculate...

引用

32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2019

作者： Han, Xiaoqu Wu, Wenxiang Zhou, Zhijie Wang, Yu Chong, Daotong Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China China Ship Development and Design Center Wuhan China

ISBN: (纸本)9788361506515

The high humidity environment in the submarine cabins results in high energy consumption of the air conditioning system. Moreover, the removal of the hydrogen contained in the air, which constitutes a threat to crew’s safety, generates a huge amount of heat. It is of particular significance to reduce the humidity of the air efficiently, through recovery of the waste heat in the dehydrogenation process. Therefore, a novel recirculated regenerative desiccant wheel dehumidification system is proposed in the present work for submarine air-conditioning. The dehumidification rate was optimized through an appropriate proportion between inlet and recirculating air flows. Theoretical modeling and experimental study were carried out to explore the optimal dehumidification performance at different working conditions. The influence of process air parameters (including temperature and humidity), regeneration air parameters (including bypass ratio and regeneration air temperature) and rotary desiccant wheel parameters (including rotation speed and air flow ratio) were analyzed. It was found that the dehumidification rate could be effectively improved compared to sea water direct cooling. It increased with increasing regeneration air temperature and temperature drop. There was an optimal bypass ratio for the system, around 55%-70%, to obtain the highest dehumidification rate. The ratio increased with the regeneration air temperature. There existed an optimal rotary speed (approx. 12 r·h-1) and optimal air flow ratio (approx. 70%). Overall, the feasibility of the proposed system was validated and the dehumidification characteristics at various working conditions were demonstrated to prompt its application. © ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. All rights reserved.

关键词： Air conditioning

来源：评论

学校读者我要写书评

暂无评论

The theoretical and numerical analysis on a multi-blade liquid lead pump 27

The theoretical and numerical analysis on a multi-blade liqu...

引用

27th International Conference on Nuclear engineering: Nuclear power Saves the World!, ICONE 2019

作者： Wang, Kailin Li, Liangxing Xie, Wei Zhang, Shuangbao State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xianning West Road 28# Xi'an city710049 China

ISBN: (纸本)9784888983051

Lead or lead-alloy cooled fast reactors (LFRs) have been proved to be the most promising Generation IV reactors with high performance in neutronics, thermal hydraulics and security features. Small forced circulation modular LFRs is one of the potential candidates for LFRs development which has attracted particular attention in recent years. When lead-bismuth eutectic (LBE) is used as coolant, the primary LBE pump is a key conveying equipment, and therefore the hydraulic performance of LBE pump is great important to the safety of LFR. Motivated by improving the hydraulics performance of LBE pump, this paper presents a theoretical and computational analysis on an axial flow pump. The guide blades are set at the outlet of the impeller to eliminate the rotational motion of the liquid LBE and transform the kinetic energy of the rotational motion into pressure energy. The rotation angle of the blade is optimized based on the theoretical analysis to reduce the vortex and raise efficiency. As well, the outlet speed and pressure parameters of each part in the pump are calculated. After that, a three-dimensional model of the modified pump is established by using CFD software and the flow characteristics of LBE in the pump are simulated. Albeit the high velocity liquid LBE alloy still exists in the side of pump shroud, some erosion-related issues remain to be fully addressed. The results of the study show that the axial LBE pump could be used as a viable solution for the design of the new generation of small module reactor primary pump from a thermo-fluid dynamic point of view. © 2018-2019 by JSME

关键词： Pumps

来源：评论

学校读者我要写书评

暂无评论

Numerical simulation of high temperature gas cooled reactors on less of coolant accident 18

Numerical simulation of high temperature gas cooled reactors...

引用

18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019

作者： Zhang, Shuangbao Li, Liangxing Xie, Wei Wang, Kailin State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xianning West Road 28# Xi’an city710049 China

The high temperature gas-cooled reactor (HTR) is well known for its prominent inherent safety, high efficiency and low carbon environmental protection, which has been identified as one of the candidates for the Generation IV nuclear energy system technology. Accurate and reliable thermal hydraulic analysis is of great significance to the system design and safe operation of HTR. Based on the coolant flow and heat transfer process in the core of HTR, this study establishes a three-dimensional model by using CFD (Computational Fluid Dynamics) software firstly, and the flow and heat transfer process of helium coolant is simulate in the core. The temperature distribution of HTR is calculated at steady state, and the calculation results were compared with the related published results for validation and verification. After that, the models are employed to study the thermal hydraulic characteristics under the loss of coolant accident of HTR. The results show that as the coolant passes through the core from top to bottom, helium is continuously heated, and the temperature increases from top to bottom. The temperature reached a maximum at the core exit position of 1032.75 K. It stated that the model can be employed to simulate the thermal hydraulic analysis for HTR. The calculation results of the loss-of-coolant, indicates t as the flow rate decreases, the coolant temperature rises gradually. When the coolant is completely lost, the temperature reaches a maximum of 1723.19 K, and it is still lower than the design limit of 1893.15 K. © 2019 American Nuclear Society. All rights reserved.

关键词： Coolants

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on the Boiling Heat Transfer Characteristics of R134a in a Helically Coiled Tube

引用

Kung Cheng Je Wu Li Hsueh Pao/Journal of engineering Thermophysics 2019年第3期40卷 587-593页

作者： Niu, Xiao-Juan Yuan, Huai-Jie Quan, Chen Bai, Bo-Feng Zhao, Liang State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

The characteristics of R134a boiling heat transfer in a vertically helically coiled tube are studied. The experimental parameters are as follows: the heat flux is 10∼60 kW•m-2, the mass flux is 195∼400 kg•m-2 •s-1, the pressure is 0.8∼1.1 MPa, and the outlet vapor quality is 0.1∼0.9. The experimental data are compared with the existing correlations of boiling heat transfer coefficient. Based on the analysis of boiling heat transfer mechanism, a new correlation for boiling heat transfer in coiled tube is proposed. The circumferential distribution characteristics of wall temperature and heat transfer coefficient are analyzed. The wall temperatures at inner and top side are relatively higher, and the heat transfer coefficients at the bottom and the outer side are relatively higher. The local heat transfer coefficients are compared with the new correlation proposed in this paper. The results show that the heat transfer coefficients at top and bottom sides can be predicted by the new correlation. However, the new correlation underestimates the heat transfer coefficient at the outer side and overestimates that at the inner side, the deviations are 16.6% and -11.9% respectively. © 2019, Science Press. All right reserved.

关键词： Heat transfer coefficients

来源：评论

学校读者我要写书评

暂无评论

Three-dimensional modeling and thermal hydraulic analysis of high temperature gas-cooled reactor core 27

Three-dimensional modeling and thermal hydraulic analysis of...

引用

27th International Conference on Nuclear engineering: Nuclear power Saves the World!, ICONE 2019

作者： Zhang, Shuangbao Li, Liangxing Xie, Wei Wang, Kailin State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xianning West Road 28# Xi'an city710049 China

ISBN: (纸本)9784888983051

The high temperature gas-cooled reactor (HTR) is an advanced reactor with the characteristics of Generation IV nuclear energy system which has attracted wide attention due to the excellent performances of inherent safety, economy, high efficiency and low carbon environmental protection. Accurate and reliable thermal hydraulic analysis is of great significance for studying the flow and heat transfer in the core of HTR. Based on the coolant flow and heat transfer process in the core of HTR, this study establishes a three-dimensional coupled model by using CFD (Computational Fluid Dynamics) software firstly, and the flow and heat transfer process of helium coolant is simulate in the core. The temperature variation in the reactor is calculated under the conditions of steady-state operation of the HTR core, and the calculation results by the present models were compared with calculated results from the benchmark software of Thermix and the related published results. The results showed that the average temperature of the outlet section is 759.6 ℃, and the maximum relative error with the published data is 1.25%. The steady-state results under the full power conditions based on the three-dimensional model are in good agreement with the calculation data from those of THERMIX. It stated that the three-dimensional model can be employed to simulate the thermal hydraulic analysis for HTR. On this basis, the heat transfer characteristics of core is simulated under 50% full power, and the are result helpful for the operation and design of HTR. © 2018-2019 by JSME

关键词： Porous materials

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：