检索结果-内蒙古大学图书馆

18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019

作者： Wang, Kailin Li, Liangxing Xie, Wei Zhang, Shuangbao State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xianning West Road 28# Xi’an city710049 China

The hydraulic performance of lead-bismuth eutectic (LBE) pump is of great importance for the safety aspects concerning lead-alloy cooled fast reactors (LFRs). To investigate the effect of different rotation speed on the performance of axial LBE pump, different rotation speed axial LBE pumps are designed by planar cascade and streamline method with the same mass flow rate and hydraulic head. Ansys BladeGen is used to establish the three-dimensional model of the axial-flow pump. CFD software (Ansys CFX) carry out numerical calculation. Numerical studies are used to compared the performance between two pumps with different rotation speed. To improve the accuracy of CFD simulation, the numerical result is verified by grid independence method and compared with theoretical calculation result. The flow velocity of the liquid LBE have great impact on the design of LBE pump because of the requirement to avoid affect of corrosion. It is found that the maximum flow velocity of low rotation speed pump is about 7.8 m/s, which is lower than the maximum flow velocity of high rotation speed pump in the case of constant volume and performance. Performance of low rotation speed pump meets the requirements of the reactor operating under long-term high load. The research results could be a viable solution used as a reference for the development of LFRs. © 2019 American Nuclear Society. All rights reserved.

关键词： Pumps

来源：评论

学校读者我要写书评

暂无评论

Digital techniques assisted in tailoring electrode structure to optimize electrode performance

引用

Energy Storage Materials 2025年 80卷

作者： Heng Huang Zhifu Zhou Wei-Tao Wu Lei Wei Chengzhi Hu Jiaxuan Ma Linsong Gao Yang Li Yubai Li Yongchen Song Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education Dalian University of Technology Dalian 116023 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China School of Mechanical Engineering Nanjing University of Science and Technology Nanjing 210094 China Department of Mechanical and Energy Engineering Southern University of Science and Technology Shenzhen 518055 China School of Mechanical Engineering and Mechanics Xiangtan University Xiangtan 411105 China

Poor rate performance limits the application of high-areal-loading electrodes in energy storage, and optimizing the microstructure of the cathode is considered as a way to improve this limitation. In this study, we integrated X-ray computed tomography (XCT) with digital technology (virtual electrodes and microstructure-based numerical simulations) to quantify the correlation between electrode structure and internal kinetic performance of lithium-ion electrodes. Results show that electrode structure alters the internal kinetic properties, thereby affecting rate capacity and nominal potential. Based on the parametric relationship between electrode structure and electrochemical-thermal properties, we explored the effects of structural regulation on electrode performance. Vertical channels significantly enhanced the rate capability and ohmic heating rate of small-particle electrodes, while solid-phase diffusion (SPD) dominated the discharge performance of large-particle electrodes, exhibiting low sensitivity to tortuous strategies. Furthermore, electrodes with abundant SPD barriers exhibit unidirectional propagation of reaction fronts, resulting in a deeper SPD-limited region. This observation inspired the integration of two structural strategies that favor both mass transport and reaction penetration. Optimized electrode structures enhanced energy density at high rates and accommodated diverse particle sizes and thicknesses. Additionally, the coupling effect of the heat transfer environment on electrode performance was investigated. This study presents a novel paradigm for bottom-up electrode design using microstructure-resolved model, providing both microscopic mechanisms and quantitative insights for advanced battery development.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Experimental and numerical study on impinging fuel spray under high-pressure cross-flow condition 14

Experimental and numerical study on impinging fuel spray und...

引用

14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018

作者： Si, Z. Guo, M. Ashida, Y. Nishida, K. Ogata, Y. Tang, C. Huang, Z. Department of Mechanical System Engineering University of Hiroshima 1-4-1 Kagamiyama Higashi-Hiroshima739-8527 Japan School of Mechanical and Electronic Engineering Wuhan University of Technology 122 Luoshi road Wuhan Hubei430070 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University 28 Xianning west road Xi'an710049 China

It is certified that the fuel spray is strongly affected by both in-cylinder air flow and piston cavity wall impingement in a direct injection engine. In this study, sprays injected by a valve covered orifice nozzle were tested by a high-speed video camera and a continuous wave laser sheet under a wind-tunnel with cross-flow and pressurized ambience, thereby the spray profiles in vertical and horizontal planes were investigated. Moreover, the experiment results were compared with simulations which was calculated by the validated spray models based on the CONVERGE software. With increase in the cross-flow velocity, the spray tip penetration evidently increased, and the increased cross-flow velocity led to an increase in the vortex height because of the enhanced spray dispersion. Furthermore, the high ambient pressure restrains the spray dispersion and leads to smaller spray tip penetration and vortex height. The outlines of spray with same liquid-to-air momentum flux ratio q can agree with each other in the windward side, nevertheless the droplet diffusion under high cross-flow velocity is distinct in the leeside. At the horizontal plane of y=25mm, a complex vortex movement was observed that resulted in a nonuniform distribution of droplets in the upper part of the spray in the leeward side. From the calculations, in the radial region apart from the impingement point (8mm4mm) hardly moved. © 2018 Solar Turbines Incorporated.

关键词： Continuous wave lasers

来源：评论

学校读者我要写书评

暂无评论

Suppression thermal runaway propagation of LiFePO4 batteries during nail penetration test based on liquid immersion cooling

引用

Energy 2025年 330卷

作者： Liu, Xinyu Li, Yang Gao, Shuai Lv, Xuecheng Zhou, Zhifu Wu, Wei-Tao Wei, Lei Lyu, Jizu Li, Yubai Song, Yongchen Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education Dalian University of Technology Dalian116024 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China School of Mechanical Engineering Nanjing University of Science and Technology Nanjing210094 China Department of Mechanical and Energy Engineering Southern University of Science and Technology Shenzhen518055 China School of Mechanical Engineering Guangdong Ocean University Zhanjiang524088 China

The thermal safety accidents of high specific energy lithium-ion batteries (LIBs) occur frequently, impeding their further large-scale application in electric vehicles. In this study, the experimental systems for semi-open and sealed spaces are established. Meanwhile, based on the liquid immersion cooling (LIC) system, the thermal runaway (TR) suppression mechanisms of the single LIB and LIB pack are reported systematically. For the single LIB (two pouch cells connected in series), the LIB is penetrated to 50 % depth, namely, the first pouch cell. We discover that the unpenetrated pouch cell remains at 0.58 V and is structurally intact. Compared with the natural convection conditions, the LIB peak temperature is decreased by 141.3 °C. The gas generation reactions are significantly mitigated. Furthermore, the heat and gas generation are gradually decreased with a reduction in state of charge (SOC). More importantly, after penetrating the first LIB in the LIB pack, we observe that the maximum temperature of the neighboring LIB is around 49 °C. The study provides a first step towards LIB thermal safety protection projects. © 2025 Elsevier Ltd

关键词： Lithium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Failure Analysis of Tube-Burst on T91 Platen Superheater of 600 MW Supercritical Boiler

Failure Analysis of Tube-Burst on T91 Platen Superheater of ...

引用

Artificial Intelligence and Electromechanical Automation (AIEA), International Conference on

作者： Ke Sun Jia'an Wang Yu Yan Jiahao Jiang Lei Deng State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi'an Jiaotong University Xi'an China China Huadian Electric Power Research Institute Co. Ltd. Hangzhou China

ISBN: (数字)9781728182889

ISBN: (纸本)9781728182896

In this paper, the specimen of the bursting tubes, original tube and oxide-like debris are analysed in-depth by macroscopic examination, chemical composition analysis, mechanical properties, metallographic examination, scanning electron microscopy and energy spectrum analysis etc.,. It shows that the main reason for the tube-burst is that the original oxide matters or time-original oxide matters blocks the tube, reducing the cooling effect of the steam, and resulting in a short-term overheating of the tube. It is recommended to control the internal cleanliness of boiler equipment and pipest.

关键词： component tube burst failure analysis oxide matters over temperature FAILURE ANALYSIS excess temperature platen superheater Energy Dispersive X-Ray Spectroscopy oxides Cooling effects tube reducing

来源：评论

学校读者我要写书评

暂无评论

Analysis of Frequent Tube Burst of High Temperature Reheater in 600 MW Unit

Analysis of Frequent Tube Burst of High Temperature Reheater...

引用

Sustainable power and Energy Conference (iSPEC)

作者： Ke Sun Jia'an Wang Yu Yan Jiahao Jiang Lei Deng Defu Che China Huadian Electric Power Research Institute Co. Ltd. Hangzhou China State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi'an Jiaotong University Xi'an China

ISBN: (数字)9781728191645

ISBN: (纸本)9781728191652

The reasons of frequent tube burst of the high temperature reheater in a supercritical 600 MW unit were systematically investigated via the examination of macroscopic inspection, chemical composition, mechanical properties, microstructures, scanning electron microscope and energy disperse spectroscopy detection. It is demonstrated that the tube burst of the high temperature reheater results from not only design factors, but also manufacture quality. Due to the absence of solid solution treatment in spare elbow, the inner dislocations and residual stress increase obviously, which accelerates the precipitation of carbide containing Cr and the formation of Cr depleted zone on grain boundary(GB) subsequently, leading to the decrease of GB corrosion resistance and the final leakage of high temperature reheater tube induced by intergranular corrosion.

关键词： Temperature Corrosion Welding Electron tubes Residual stresses Acceleration Elbow

来源：评论

学校读者我要写书评

暂无评论

Wake of a stationary sphere near a wall

引用

Huagong Xuebao/CIESC Journal 2019年第9期70卷 3300-3306页

作者： Li, Xing Bai, Bofeng State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'anShaanxi710049 China

The flow characteristics of the sphere under uniform flow in a large space have been extensively studied, but the influence of the wall on the flow characteristics of the sphere is not clear. The wake of the particle is focused. Results show that there are three regimes of the sphere wake, which are steady wake, unsteady symmetric wake and unsteady asymmetric wake. If Re400, the vortex shedding is not symmetric and becomes chaotic as Reynolds number increases. © All Right Reserved.

关键词： Wakes

来源：评论

学校读者我要写书评

暂无评论

Corrigendum to “Enhanced oxygen reduction reaction activity of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ cathode via Pr-doping for intermediate-temperature solid oxide fuel cells” [J. Alloys Compd. 1022 (2025), 179947]

引用

Journal of Alloys and Compounds 2025年 1024卷

作者： Benlin Xiang Weihua Jia Yuqi Wang Fei Li Weibin Xu Xinyi Li Jianbing Huang Quanyi Tang Xin Ding Le Wu Lan Zheng School of Chemical Engineering Northwest University Xi’an Shaanxi 710127 China Xi'an Key Lab of Green Hydrogen Energy Production Storage & Application Integration Technology Xi’an Shaanxi 710127 China Shaanxi Key Laboratory for Carbon Neutral Technology Xi’an Shaanxi 710069 China School of Carbon Neutrality College Northwest University Xi’an Shaanxi 710127 China State Key Laboratory of Multiphase Flow in Power engineering Xi’an Jiaotong University Xi'an Shaanxi 710049 China

来源：评论

学校读者我要写书评

暂无评论

Investigation of curvature statistics of turbulent premixed Bunsen flames based on leading points concept 12

Investigation of curvature statistics of turbulent premixed ...

引用

12th Asia-Pacific Conference on Combustion, ASPACC 2019

作者： Zhang, Weijie Wang, Jinhua Xia, Hao Lin, Wenjun Zhang, Meng Huang, Zuohua State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University No. 28 Xian Ning Road Beilin District Xi'an Shaanxi710049 China

In previous studies, it was showed that the leading point, namely, the positively curved flame front, may be vital in controlling the propagation of flame, thus controlling the burning intensity of turbulent premixed flames. This paper is aimed at investigating the morphologies of the leading points under low and relatively high turbulence intensities based on flame curvature statistics. Premixed C3H8/H2/air flames were obtained with a Bunsen burner. Flame front was captured with OH-PLIF technique. The results show prevalent leading points with positive curvatures at low turbulence intensity. Percentage of positive curvatures were observed to increase at lower turbulence intensity. However, with increasing turbulence intensity, such feature can be mitigated or even overpowered with equal probability of negative and positive curvatures. Proper models for leading point are recommended according to the experimental results. However, question remains as to the underlying mechanism of leading point concept. © Asia-Pacific Conference on Combustion, ASPACC *** right reserved.

关键词： Combustion

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on the Characteristics of Effervescent Atomization

引用

Kung Cheng Je Wu Li Hsueh Pao/Journal of engineering Thermophysics 2019年第4期40卷 834-838页

作者： Wang, Wen-Jie Zheng, Xue-Bo Bai, Bo-Feng State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

In this paper, the characteristics of effervescent atomization are studied experimentally. A high speed camera was used to record the bubbling process and the change of the flow regime in the mixing chamber. Three typical flow regimes were observed, namely, bubble flow, transition flow and annular flow. The particle size of the spray droplet was measured by a laser particle sizer. The droplet diameter distribution curve under typical flow regimes was obtained. Bubble flow and annular flow showed a single peak distribution, while transition flow showed a bimodal distribution. The effects of parameters such as gas-liquid ratio (GLR), liquid mass flow rate and orifice diameter on droplet size were studied. The results showed that the larger the GLR, the larger the liquid mass flow rate and the smaller the orifice diameter, the smaller the SMD. The instability of the atomization process is analyzed. The larger the GLR and the smaller the orifice diameter, the greater the instability. © 2019, Science Press. All right reserved.

关键词： Atomization

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：