检索结果-内蒙古大学图书馆

Computational homogenization of thermomechanical properties for Fully Ceramic Microencapsulated fuel with 3D printed SiC matrix

引用

Annals of Nuclear Energy 2025年 222卷

作者： Chen, Yiwen Lu, Qi Liu, Changwen Li, Wei Zhang, Dalin Su, G.H. State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an710049 China Science and Technology on Reactor System Design Technology Laboratory Nuclear Power Institute of China Chengdu61213 China State Key Laboratory for Strength and Vibration of Mechanical Structures Xi'an Jiaotong University Xi'an710049 China

Fully Ceramic Microencapsulated (FCM) fuel, fabricated using 3D printing technology, incorporates traditional Tristructural-Isotropic (TRISO) fuel particles embedded within a 3D-printed SiC matrix. This fuel type shows great potential for compact, high-temperature nuclear reactors. However, comprehensive performance analysis remains challenging due to the multilayered structure, complex material properties, and the irradiation behavior of numerous TRISO particles within the matrix. To address these challenges, this study aims to apply finite element (FE)-based computational homogenization to evaluate the fuel's thermomechanical properties. First, a detailed finite element analysis (FEA) of a single TRISO particle's performance was conducted, focusing primarily on the Buffer-IPyC gap size change during irradiation, a critical factor influencing the fuel's thermal performance. Second, the homogenization of a single TRISO particle was performed using FEA, accounting for the changes in the Buffer-IPyC gap size. Finally, homogenized TRISO particles were randomly distributed and perfectly bonded within a 3D-printed SiC matrix to form a Representative Volume Element (RVE). The FE homogenization of the RVE was then conducted to derive the effective thermomechanical properties of the FCM fuel. The packing fraction of TRISO particles in the matrix ranged from 10 % to 50 %, with temperature and burnup conditions spanning 800–1600 K and 0–16 % FIMA, respectively. Results show that irradiation significantly affects the effective properties of the fuel, though this impact diminishes as burnup increases. Additionally, the effective thermal conductivity of the FCM fuel decreases with increasing TRISO packing fraction, assuming the thermal conductivity of the SiC matrix exceeds that of TRISO particles. This study provides a valuable reference for the design and optimization of FCM fuel for future nuclear applications. © 2025 Elsevier Ltd

关键词： Thermal conductivity of solids

来源：评论

学校读者我要写书评

暂无评论

Condensation Characteristic of Sulfuric Acid Vapor on Low-Temperature Surface of Tube Heat Exchanger 9th

Condensation Characteristic of Sulfuric Acid Vapor on Low-Te...

引用

9th International Symposium on Coal Combustion, ISCC 2019

作者： Sun, Ke Yan, Yu Hu, Fangfang Deng, Lei Che, Defu State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an710049 China Huadian Electric Power Research Institute Hangzhou310030 China China Energy Engineering Group Shaanxi Electric Power Design Institute Co. Ltd Xi’an710054 China

ISBN: (纸本)9789811616563

In the low-low temperature flue gas system, a part of the H2SO4 vapor is adsorbed by the ash particles, and the other part will condense on the surface of the heat exchanger, resulting in low-temperature corrosion. In this paper, a numerical model for the condensation of H2SO4 vapor on low-temperature surface is constructed. This model combines the thermodynamic phase equilibrium theory, the multicomponent transport theory and the heat transfer theory. The effects of flue gas properties, the size and arrangement of heat exchanger are studied. The results show that, the condensation rate is mainly related to the concentration gradient of H2SO4 vapor near the surface. As the flue gas or surface temperature increases, condensation rate decreases. When the flue gas velocity increases, the mass transfer resistance is reduced, thereby the condensation rate is increased. As the content of H2SO4 in the flue gas increases, the concentration gradient of H2SO4 vapor near the surface increases, and the condensation rate of increases linearly. But the content of water vapor has little effect on the H2SO4 condensation rate. For the tube heat exchanger, when the working conditions keep the same, the smaller the outer diameter of the tube, the greater the condensation rate of the H2SO4 vapor. Compared with the inline arrangement, when the tubes are staggered, the disturbance of flue gas is stronger, and the condensation rate is larger. © 2022, Tsinghua University Press.

关键词： Flue gases

来源：评论

学校读者我要写书评

暂无评论

Uncertainty Analysis of FLiNaK Thermophysical Properties on Convective Heat Transfer Characteristics in Circular Tube

SSRN

引用

SSRN 2024年

作者： Li, Haoyang Ding, Ming Guo, Zehua Heilongjiang Provincial Key Laboratory of Nuclear Power System & Equipment Harbin Engineering University Harbin150001 China State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi’an Jiaotong University Xi’an710049 China

Molten salts have attracted a spate of quantity of interest in energy and chemistry fields due to their large volumetric capacity, and thermodynamic stability at elevated temperatures. However, on account of immature technology and measurement methods, the physical properties of molten salts, such as dynamic viscosity, thermal conductivity, specific heat capacity and density, have large uncertainties, which will be transported with CFD simulation equations and experimental processes. While present investigations normally focus on thermal-hydraulic characteristics, disregarding the impact of uncertainty on reactor safety. Thus, this paper firstly performs a numerical simulation to investigate the thermal-hydraulic performance of FLiNaK (LiF-NaF-KF, 46.5–11.5–42 mol%) in a horizontal tube using a computational fluid dynamic (CFD) tool, STAR-CCM+, and validates the applicability of classic correlations for molten salt. Based on this, an uncertainty analysis methodology, polynomial chaos expansion (PCE) is carried out to analyze the uncertainty that contributes to the heat transfer characteristic. Three primary physical properties of molten salt are considered as the input parameter, tensor product quadrature nodes are employed in this work to calculate the representative sample points to alleviate the computational expense. The contributions of each parameter to heat transfer are also analyzed by the sobol composition method. Finally, deviations in the experimental post-processing (compared with classic correlations) caused by discrepancies in the selected properties from the actual properties due to uncertainty are also taken into account. The result shows the thermal-hydraulic performance can be nicely modeled and simulated results are in good agreement with widely used correlations. Meanwhile, the consequences of uncertainty analysis suggest that the polynomial chaos expansion methodology is robust and neoteric for molten salt analysis. © 2024, The Authors. All righ

关键词： Uncertainty analysis

来源：评论

学校读者我要写书评

暂无评论

Large contributions of emission reductions and meteorological conditions to the abatement of PM_(2.5)in Beijing during the 24th Winter Olympic Games in 2022

引用

Journal of Environmental Sciences 2024年第2期136卷 172-188页

作者： Yaping Jiang Shaocai Yu Xue Chen Yibo Zhang Mengying Li Zhen Li Zhe Song Pengfei Li Xiaoye Zhang Eric Lichtfouse Daniel Rosenfeld Key Laboratory of Environmental Remediation and Ecological Health Ministry of EducationResearch Center for Air Pollution and HealthCollege of Environmental and Resource SciencesZhejiang UniversityHangzhou 310058China College of Science and Technology Hebei Agricultural UniversityBaoding 071000China Chinese Academy of Meteorological Sciences China Meteorological AdministrationBeijing 100081China Aix-Marseille Univ CNRSColl FranceCNRSIRDINRAEEuropole Mediterraneen de l’ArboisAvenue Louis Philibert13100 Aix en ProvenceFrance Xi’an Jiaotong University State Key Laboratory of Multiphase Flow in Power EngineeringXi’an 710049China Institute of Earth Sciences The Hebrew University of JerusalemJerusalemIsrael

To guarantee the blue skies for the 2022 Winter Olympics held in Beijing and Zhangjiakou from February 4 to 20,Beijing and its surrounding areas adopted a series of emission control *** provides an opportunity to determine the impacts of large-scale temporary control measures on the air quality in Beijing during this special ***,we applied the WRF-CMAQ model to quantify the contributions of emission reduction measures and meteorological *** show that meteorological conditions in 2022 decreased PM_(2.5)in Beijing by 6.9 and 11.8μg/m^(3)relative to 2021 under the scenarios with and without emission reductions,*** emission reduction measures implemented in Beijing and seven neighboring provinces resulted in an average decrease of 13.0μg/m^(3)(-41.2%)in PM_(2.5)in *** the entire period,local emission reductions contributed more to good air quality in Beijing than nonlocal emission *** the emission reduction scenario,local,controlled regions,other regions,and boundary conditions contributed 47.7%,42.0%,5.3%,and 5.0%to the PM_(2.5)concentrations in Beijing,*** results indicate that during the cleaning period with the air masses from the northwest,the abatements of PM_(2.5)were mainly caused by local emission ***,during the potential pollution period with the air masses from the east-northeast and west-southwest,the abatements of PM_(2.5)were caused by both local and nonlocal emission reductions almost *** implies that regional coordinated prevention and control strategies need to be arranged scientifically and rationally when heavy pollution events are forecasted.

关键词： PM_(2.5) WRF-CMAQ Meteorological conditions Emission reductions Winter Olympic games

来源：评论

学校读者我要写书评

暂无评论

Molecular dynamics study of shale oil adsorption and diffusion behavior in reservoir nanopores: Impact of hydrocarbon composition and surface type

引用

Journal of Molecular Liquids 2024年第PartA期414卷

作者： Zheng, Lichen Zhao, Qiuyang Adams, Michael J. Alexiadis, Alessio Wang, Yechun Jin, Hui Guo, Liejin State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China School of Chemical Engineering University of Birmingham BirminghamB15 2TT United Kingdom

Understanding shale oil adsorption in reservoir nanopores is essential for efficient extraction. This study used MD simulations to analyze the adsorption and diffusion of two- and multi-component hydrocarbons (Aromatics, Alkanes, Resin) on various shale surfaces (Calcite, Montmorillonite, Quartzite, Organic) at 353 K and 25 MPa. Hydrocarbons formed a bilayer adsorption structure comprising a high-concentration adsorption layer (L1, 0.35–0.90 g/cm3) and a low concentration weak adsorption layer (L2), with adsorption density ranked as Resin > Aromatics > Alkanes. Reservoir surfaces were classified as ionic (e.g., calcite, montmorillonite) and non-ionic (e.g., quartz, graphite), and polar hydrocarbons exhibited higher adsorption densities and energies on ionic surfaces due to combined electrostatic and van der Waals interactions, while non-ionic surfaces showed smaller adsorption differences. For multicomponent hydrocarbons, adsorption layer densities followed the order: graphite > MMT-SiO > quartz > calcite > MMT-Na, with competitive adsorption observed. The polar component exhibited a greater adsorption advantage on the calcite, MMT-SiO side and graphite surfaces due to electrostatic interactions and π-π interactions, and a lesser advantage on the MMT-Na side and quartz surfaces. Hydrocarbon diffusivity was influenced by molecular mass and polarity and ordered as Alkanes > Aromatics Resin. Polar molecules had a weaker diffusion than nonpolar molecules at similar molecular masses. Among the multicomponent hydrocarbons, the self-diffusion coefficient (Self-D) of Resin increased, while that of lighter components decreased compared to two-component systems. These findings offer strategies for improving shale oil recovery by tailoring injection fluids to reservoir types, anionic surfactants or chelating agents may be used to reduce electrostatic interactions in carbonate and clay reservoirs, while nonionic surfactants may be more effective in quartz reservoirs. © 2024

关键词： Nonionic surfactants

来源：评论

学校读者我要写书评

暂无评论

Electron-Deficient Zn-N_(6) Configuration Enabling Polymeric Carbon Nitride for Visible-Light Photocatalytic Overall Water Splitting

引用

Nano-Micro Letters 2022年第12期14卷 602-616页

作者： Daming Zhao Yiqing Wang Chung-Li Dong Fanqi Meng Yu-Cheng Huang Qinghua Zhang Lin Gu Lan Liu Shaohua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049People’s Republic of China State Key Laboratory of Rare Earth Resource Utilization Changchun Institute of Applied ChemistryChinese Academy of SciencesChangchun 130022People’s Republic of China Department of Physics Tamkang UniversityNew Taipei City 25137TaiwanPeople’s Republic of China Beijing National Laboratory for Condensed Matter Physics Institute of PhysicsChinese Academy of SciencesBeijing 100190People’s Republic of China

Despite of suitable band structures for harvesting solar light and driving water redox reactions,polymeric carbon nitride(PCN)has suffered from poor charge transfer ability and sluggish surface reaction kinetics,which limit its photocatalytic activity for water ***,atomically dispersed Zn-coordinated three-dimensional(3D)sponge-like PCN(Zn-PCN)is synthesized through a novel intermediate coordination *** characterizations and theoretical calculations well evidence that Zn single atoms are coordinated and stabilized on PCN in the form of Zn-N_(6) configura-tion featured with an electron-deficient *** an electronic configuration has been demonstrated contributive to promoted electron excitation,accelerated charge separation and transfer as well as reduced water redox *** benefited from the abundant surface active sites derived from the 3D porous structure,Zn-PCN realizes visible-light photocatalysis for overall water splitting with H_(2) and O_(2) simultaneously evolved at a stoichiometric ratio of 2:*** work brings new insights into the design of novel single-atom photocatalysts by deepening the understanding of electronic configurations and reactive sites favorable to excellent photocatalysis for water splitting and related solar energy conversion reactions.

关键词： Zn single atoms Polymeric carbon nitride Overall water splitting Photocatalysis

来源：评论

学校读者我要写书评

暂无评论

Operational Flexibility Analysis of 1100 MW Supercritical Coal-Fired power Plants during Load Cycling Transient Processes

Operational Flexibility Analysis of 1100 MW Supercritical Co...

引用

IEEE Asia power and Energy engineering Conference (APEEC)

作者： Lu Chen Dengliang Wang Jie Ma Yongliang Zhao Weixiong Chen State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University China Energy Engineering Group Northwest China Electric Power Test Research Institute Co. LTD Xi’an China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China Ulatt Power Plant of Northern United Power Co. Ltd Bayannur

Operational flexibility of the coal-fired power plants must be improved so as to deal with the unpredictability of renewable energy in the future. In this study, a 1100 MW supercritical coal-fired power plant was selected, and dynamic simulation model of the unit was established via GSE software. Moreover, control model was added. Dynamic response characteristics of key thermal parameters under different power ramp rates in the region of 30%-100% THA was obtained. The cumulative standard coal consumption rate and integral absolute error were selected as the economic evaluation index of the thermal system. The results show that the maximum power ramp rate of the unit in each region during loading up is smaller than that during loading down. In the loading down process, the standard coal consumption rate of the unit firstly decreases with the reduction of output power. When the load of the unit drops to the target load, the standard coal consumption rate rises to a stabler stage. The process of loading up is the contrary. The cumulative standard coal consumption rate of coal-fired power plant is the lowest, only 275 g•(kW•h) -1 during the loading down process of 100%-75% THA. However, the cumulative standard coal consumption rate is the highest, reaching 311 g(•kW•h) -1 during the loading up process of 30%-50% THA. Due to the output power of the unit fluctuating greatly, the integral absolute error of the unit is much higher than that of other load cycling transient processes during the loading up process of 50%-75% THA and 30%-50% THA. It can be concluded that the loading up process of the unit is more difficult to control stably. This study can provide sufficient theoretical and data guidance for improving the operational flexibility of the coal-fired power plants.

关键词： Economics Fluctuations Loading Process control Coal Software Transient analysis

来源：评论

学校读者我要写书评

暂无评论

Morphology Construction of Molybdenum Doped Nickel Sulfide Electrocatalyst Induced by Nh4f to Promote Hydrogen Evolution Reaction

SSRN

引用

SSRN 2024年

作者： Zhang, Baikai Li, Xiaohui Liu, Maochang Huadian Electric Power Research Institute Co. Ltd. Zhejiang310030 China School of Eenergy and Power Engineering Xi’an Jiaotong University Shaanxi 710049 China State Key Laboratory of Multiphase Flow in Power Engineering China

Here, by varying the mass of NH4F throughout the hydrothermal process, Mo-doped nickel-based sulfide catalysts (Mo-NiS-Fx) with various morphologies (prisms, rods, flakes, and cones) were created. Among these, the flaky Mo-NiS-F1.2 exhibited exceptional performance towards electrochemical hydrogen evolution reaction, surpassing most similar catalysts with an overpotential of 79 mV at 10 mA cm-2 and a Tafel slope of 49.8 mV dec-1. Significantly, Mo-NiS-F1.2 maintained its high activity for hydrogen evolution over 60 h at 10 mA cm-2, making it suitable for widespread commercial application. This work demonstrates the potential of morphology manipulation to enhance catalytic activity. © 2024, The Authors. All rights reserved.

关键词： Hydrogen

来源：评论

学校读者我要写书评

暂无评论

Bacterial Cellulose Composite Solid Polymer Electrolyte With High Tensile Strength and Lithium Dendrite Inhibition for Long Life Battery

引用

Energy & Environmental Materials 2021年第3期4卷 434-443页

作者： Yuhan Li Zongjie Sun Dongyu Liu Shiyao Lu Fei Li Guoxin Gao Min Zhu Mingtao Li Yanfeng Zhang Huaitian Bu Zhiyu Jia Shujiang Ding Department of Applied Chemistry School of ChemistryXi’an Key Laboratory of Sustainable Energy Materials ChemistryMOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed MatterState Key Laboratory of Electrical Insulation and Power EquipmentXi’an Jiaotong UniversityXi’an 710049China International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China Department of Materials and Nanotechnology SINTEF IndustryForskningsveien 1Oslo 0373Norway School of Chemistry and Chemical Engineering MOE Key Laboratory of Cluster ScienceBeijing Institute of TechnologyBeijing 100081China

The development of metallic lithium anode is restrained by lithium dendrite growth during *** solid polymer electrolyte with high mechanical strength and lithium ion conductivity could be applied to inhibit lithium dendrite *** prepare the high-performance solid polymer electrolyte,the environment-friendly and cheap bacterial cellulose(BC)is used as filler incorporating with PEO-based electrolyte owing to good mechanical properties and Li salts ***/Li TFSI/BC composite solid polymer electrolytes(CSPE)are prepared easily by aqueous mixing in *** lithium ion transference number of PEO/Li TFSI/BC CSPE is 0.57,which is higher than PEO/Li TFSI solid polymer electrolyte(SPE)(0.409).The PEO/Li TFSI/BC CSPE exhibits larger tensile strength(4.43 MPa)than PEO/Li TFSI SPE(1.34 MPa).The electrochemical window of composite electrolyte is widened 1.43 V by adding *** functional theory calculations indicate that flex of PEO chains around Li atoms is suppressed,suggesting the enhanced lithium ion *** molecular orbitals results suggest that an unfavorable intermolecular charge transfer lead to achieve higher potential for BC composite *** solid-state Li metal battery with PEO/Li TFSI/BC CSPE delivers longer cycle life for 600 cycles than PEO/Li TFSI SPE battery(50 cycles).Li symmetrical battery using PEO/Li TFSI/BC CSPE could be stable for 1160 h.

关键词： all solid-state battery bacterial cellulose composite polymer electrolyte DFT calculations HOMO and LUMO

来源：评论

学校读者我要写书评

暂无评论

Numerical Investigation on Isolated Moving Charged Droplet Evaporation in Electrostatic Field with Highly Volatile R134a 15

Numerical Investigation on Isolated Moving Charged Droplet E...

引用

15th Triennial International Conference on Liquid Atomization and Spray Systems, ICLASS 2021

作者： Tian, Jiameng Wang, Junfeng Chen, Bin School of Energy and Power Engineering Jiangsu University Zhenjiang China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

Fundamental investigations of the charged droplet evaporation are helpful in enhancing the cooling capability and advancing the electrostatic spray model, whereas the corresponding data with the highly volatile R134a under electric field is very scarce. In this work, an improved evaporation model accounting for the effects of the corona wind, Coulombic fission and electric force under the electric field was developed and validated to evaluate the importance of the electric field on the moving charged R134a droplet evaporation for the first time. Results demonstrated that the electrostatic field can improve the charged droplet evaporation by means of the heat and mass transfer enhancement by the corona wind and counteracting the drag force from air. The droplet lifetime was shortened by 20.8% (from 105.6 ms to 83.6 ms) when the applied voltage increased from 0 kV to 10 kV. Exponential decay in the charged droplet lifetime when the applied voltage increased was observed. © 2021 ICLASS 2021 - 15th Triennial International Conference on Liquid Atomization and Spray Systems. All Rights Reserved.

关键词： Drops

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：