检索结果-内蒙古大学图书馆

Numerical simulation of local and global mixing/segregation characteristics in a gas–solid fluidized bed

Chinese Journal of Chemical engineering 2022年第4期35卷 72-86页

作者： Zhen Wan Youjun Lu State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

Researches on solids mixing and segregation are of great significance for the operation and design of fluidized bed *** this paper,the local and global mixing and segregation characteristics of binary mixtures were investigated in a gas–solid fluidized bed by computational fluid dynamics-discrete element method(CFD-DEM)coupled approach.A methodology based on solids mixing entropy was developed to quantitatively calculate the mixing degree and time of the *** mixing curves of global mixing entropy were acquired,and the distribution maps of local mixing entropy and mixing time were also *** comparing different operating conditions,the effects of superficial gas velocity,particle density ratio and size ratio on mixing/segregation behavior were *** showed that for the partial mixing state,the fluidized bed can be divided into three parts along the bed height:complete segregation area,transition area and stable mixing *** areas showed different mixing/segregation *** gas velocity promoted the local and global mixing of binary *** increase in particle density ratio and size ratio enlarged the complete segregation area,reduced the mixing degree and increased the mixing time in the stable mixing area.

关键词： Discrete element method Solids mixing Binary mixtures Fluidized bed

来源：评论

学校读者我要写书评

暂无评论

Optimization of cold-end system of thermal power plants based on entropy generation minimization

引用

Frontiers in Energy 2022年第6期16卷 956-972页

作者： Yue FU Yongliang ZHAO Ming LIU Jinshi WANG Junjie YAN State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

Cold-end systems are heat sinks of thermal power cycles,which have an essential effect on the overall performance of thermal power *** enhance the efficiency of thermal power plants,multi-pressure condensers have been applied in some large-capacity thermal power ***,little attention has been paid to the optimization of the cold-end system with multi-pressure condensers which have multiple parameters to be ***,the design optimization methods of coldend systems with single-and multi-pressure condensers are developed based on the entropy generation rate,and the genetic algorithm(GA)is used to optimize multiple *** parameters,including heat transfer area of multi-pressure condensers,steam distribution in condensers,and cooling water mass flow rate,are optimized while considering detailed entropy generation rate of the cold-end *** results show that the entropy generation rate of the multi-pressure cold-end system is less than that of the single-pressure cold-end system when the total condenser area is ***,the economic performance can be improved with the adoption of the multi-pressure cold-end *** compared with the single-pressure cold-end system,the excess revenues gained by using dual-and quadruplepressure cold-end systems are 575 and 580 k$/a,respectively.

关键词： cold-end system entropy generation minimization optimization economic analysis genetic algorithm(GA)

来源：评论

学校读者我要写书评

暂无评论

Development of a fan-stirred constant volume combustion chamber and turbulence measurement with PIV

引用

Frontiers in Energy 2022年第6期16卷 973-987页

作者： Haoran ZHAO Jinhua WANG Xiao CAI Zhijian BIAN Hongchao DAI Zuohua HUANG State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

A fan-stirred combustion chamber is developed for spherically expanding flames,with P and T up to 10 bar and 473 K,*** characteristics are estimated using particle image velocimetry(PIV)at different initial pressures(P=0.5-5 bar),fan frequencies(ω=0-2000 r/min),and impeller diameters(D=100 and 114 mm).The flame propagation of methanol/air is investigated at different turbulence intensities(u′=0-1.77 m/s)and equivalence ratios(f=0.7-1.5).The results show that u′is independent of P and proportional toω,which can be up to 3.5 m/s at 2000 r/min.L_(T)is independent of P and performs a power regression withω*** turbulent field is homogeneous and isotropic in the central region of the chamber while the inertial subrange of spatial energy spectrum is more collapsed to-5/3 law at a high Re_(T).Compared to laminar expanding flames,the morphology of turbulent expanding flames is wrinkled and the wrinkles will be finer with the growth of turbulence intensity,consistent with the decline of the Taylor scale and the Kolmogorov *** determined S_(L)in the present study is in good agreement with that of previous *** S_(L)and S_(T)of methanol/air have a non-monotonic trend with f while peak S_(T)is shifted to the richer side compared to S_(L).This indicates that the newly built turbulent combustion chamber is reliable for further experimental study.

关键词： fan-stirred combustion chamber turbulence characteristics particle image velocimetry(PIV) methanol turbulent expanding flames

来源：评论

学校读者我要写书评

暂无评论

Fluidization of particles in SCW fluidized bed:Voidage distribution of emulsion phase

引用

Particuology 2022年第4期20卷 60-75页

作者： Hao Wang Youjun Lu State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049ShaanxiChina

Supercritical water(SCW)fluidized bed reactors convert biomass to fuels without pollutants *** this work,experimental studies were carried out to investigate voidage distribution in an SCW fu-idized bed by capacitance *** sands with different particle sizes were fluidized by SCW under system pressure of 20-27 MPa and temperature of 410-570℃.The effect of operation conditions on voidage distributions of the emulsion phase(*** voidage and probability density)is discussed.A predicting correlation between voidage and superficial velocity in emulsion phase is *** relative error of the correlation is within+25%.These research results provide useful guidance for the optimization of supercritical water gasification technology.

关键词： Supercritical water fluidized bed Capacitance probe measurement system Voidage distribution

来源：评论

学校读者我要写书评

暂无评论

Formic acid dehydrogenation reaction on high-performance Pd_(x)Au_(1−x) alloy nanoparticles prepared by the eco-friendly slow synthesis methodology

引用

Frontiers in Energy 2023年第6期17卷 751-762页

作者： Yibo GAO Erjiang HU Bo HUANG Zuohua HUANG State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China Institute of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’an 712000China

Dehydrogenation of formic acid (FA) is considered to be an effective solution for efficient storage and transport of hydrogen. For decades, highly effective catalysts for this purpose have been widely investigated, but numerous challenges remain. Herein, the Pd_(x)Au_(1−x) (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1) alloys over the whole composition range were successfully prepared and used to catalyze FA hydrogen production efficiently near room temperature. Small PdAu nanoparticles (5–10 nm) were well-dispersed and supported on the activated carbon to form PdAu solid solution alloys via the eco-friendly slow synthesis methodology. The physicochemical properties of the PdAu alloys were comprehensively studied by utilizing various measurement methods, such as X-ray diffraction (XRD), N2 adsorption–desorption, high angle annular dark field-scanning transmission electron microscope (HAADF-STEM), X-ray photoelectrons spectroscopy (XPS). Notably, owing to the strong metal-support interaction (SMSI) and electron transfer between active metal Au and Pd, the Pd0.5Au0.5 obtained exhibits a turnover frequency (TOF) value of up to 1648 h−1 (313 K, nPd+Au/nFA = 0.01, nHCOOH/nHCOONa = 1:3) with a high activity, selectivity, and reusability in the FA dehydrogenation.

关键词： FA dehydrogenation face-centred cubic structures PdAu solid solution alloy nanoparticles slow synthesis methodology SMSI effect

来源：评论

学校读者我要写书评

暂无评论

Experimental study on flow excursion instability of supercritical hydrocarbon fuel in scramjet regenerative cooling parallel channels

引用

Chinese Journal of Aeronautics 2023年第1期36卷 201-215页

作者： Xiaoyong LIU Zhuqiang YANG Ruipu MIAO Feng LIU Shujun ZHAO Qincheng BI Beijing Power Machinery Research Institute Beijing 100074China Liaoning Key Laboratory of Complex Energy Conversion and Utilization School of Energy and Power EngineeringDalian University of TechnologyDalian 116024China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

flow instability of supercritical hydrocarbon fuel is a crucial issue in scramjet regenerative cooling structure. In this study, flow excursion instability and flow distribution in parallel tubes were experimentally studied for supercritical fluids. Two types of flow excursion occur in a single tube. Type Ⅰ and Type Ⅱ excursions, and they are corresponding to decreasing and increasing flow rate respectively. They can trigger flow maldistribution between parallel tubes and the hysteresis phenomenon of flow distribution. The effects of system parameters, including inlet temperature,system pressure, and heat flux, on flow distribution were analyzed. In addition, the relationship between flow excursion and the pseudo-critical interval proposed in the literature was established according to the heated tube outlet temperature at the onset of flow instability. Finally, the flow excursion instability boundary was obtained using two dimensionless parameters. These experimental results can provide helpful insight on the mechanism of Scramjet regenerative cooling.

关键词： flow distribution Ledinegg instability Onset of flow excursion Parallel channels Regenerative cooling Scramjet Supercritical flow

来源：评论

学校读者我要写书评

暂无评论

STRESS ANALYSIS AND LIFE ASSESSMENT OF THE STEAM TURBINE ROTOR DURING PEAK SHAVING TRANSIENT PROCESSES

STRESS ANALYSIS AND LIFE ASSESSMENT OF THE STEAM TURBINE ROT...

引用

ASME 2024 power Conference, power 2024

作者： Fan, Mengyang Zhao, Yongliang Liu, Ming Wang, Chaoyang Wang, Zhu Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

ISBN: (纸本)9780791888186

To achieve the net-zero emissions targets, the global share of renewable energy is rapidly increasing. The high penetration of intermittent and variable renewable power necessitates that coal-fired power plants enhance their operational flexibility for peak shaving and frequency regulation. Frequent and rapid start-ups, shutdowns, and peak shaving processes pose significant safety challenges to the steam turbine rotors. This paper investigates the impact of flexible operation on rotor stress. Firstly, an online monitoring model was developed and verified using a finite element model of a steam turbine high-medium pressure rotor. Secondly, the online calculation model was integrated with a dynamic coal-fired unit model developed using the JTopmeret software on the GSE platform, a well-established dynamic simulation tool for nuclear and fossil fuel power plants. Finally, a rotor low-cycle fatigue life assessment model was developed, and the von Mises stress and fatigue life loss under various load variation rates and ranges were determined. As the load variation rate increases, the life loss increases significantly, with maximum von Mises stress amplitudes of 5.2, 6.5 and 7.8 MPa at 1%, 2% and 3% Pe min−1 load variation rates, respectively. Conversely, as the load variation range increases, the life loss decreases substantially, with maximum von Mises stress amplitudes of 9.2 and 5.0 MPa during load variation processes of 50%-75% and 75%-100% THA, respectively. This study provides detailed guidance for optimizing the safe operation and control strategies of coal-fired power plants. Copyright © 2024 by ASME.

关键词： Steam turbines

来源：评论

学校读者我要写书评

暂无评论

THERMAL-HYDRAULIC ANALYSIS OF THE COOLING WALL IN ULTRA SUPERCRITICAL COAL-FIRED GENERATION PLANTS DURING DEEP PEAKING

THERMAL-HYDRAULIC ANALYSIS OF THE COOLING WALL IN ULTRA SUPE...

引用

ASME 2024 power Conference, power 2024

作者： Wang, Dengliang Zhao, Yongliang Chen, Weixiong Wang, Chaoyang Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

ISBN: (纸本)9780791888186

Due to increasingly severe environmental and climate concerns currently, renewable energy is highly penetrated around the world. However, given the intermittency and instability of renewable energy, coal-fired generation plants urgently need to undertake deep peak shaving tasks, resulting in the frequent load cycling transient processes of units. It will have a significant effect on the safe operation of the boiler components, especially for the hydrodynamic instability of cooling wall within the boiler. This paper takes a 1100 MW ultra-supercritical primary reheat coal-fired generation plants as the research object. In accordance with the heating load distribution characteristics of cooling wall, a hydrodynamic characteristic calculation model of cooling wall within the boiler is constructed based on the mass conservation, momentum conservation and energy conservation equations, which introduces numerous empirical correlations available for heat transfer and hydraulic resistance calculation at the same time. The working fluid temperature in the direction of cooling wall height at 100% THA, 75% THA, 50% THA, 40% THA and 30% THA, as well as the metal temperature of the inner, outer and fin tube walls are analyzed. The changes in metal wall temperature of cooling wall under different load cycling rates are obtained during the low load operating range of 50% THA to 30% THA. Ultimate load cycling rates of the coal-fired generation plants without causing the overtemperature issue of cooling wall is obtained. Finally, when the revised fuel supply control strategy is adopted, it is able to significantly reduce the maximum metal wall temperature during the rapid load cycling process. The maximum load cycling rate is increased from 2.5% Pe/min to 3.0% Pe/min for the loading up process. Copyright © 2024 by ASME.

关键词： Coal

来源：评论

学校读者我要写书评

暂无评论

THE FLEXIBILITY ENHANCEMENT OF SUBCRITICAL COAL-FIRED power PLANTS: CONTROL STRATEGY OPTIMIZATION FOR LIVE AND REHEAT STEAM TEMPERATURE

THE FLEXIBILITY ENHANCEMENT OF SUBCRITICAL COAL-FIRED POWER ...

引用

ASME 2024 power Conference, power 2024

作者： Chen, Chen Liu, Ming Wang, Chaoyang Zhao, Yongliang Yan, Hui Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

ISBN: (纸本)9780791888186

With the increasing penetration of renewable power, flexible power sources are urgently required by the power grid to balance the supply and demand sides. Therefore, the operational flexibility of subcritical coal-fired power plants should be further enhanced. In this study, dynamic models of a reference 330MW subcritical coal-fired power plant were developed and validated. The load ramp performances of the reference plant were simulated. The maximum ramp rates during loading down processes were 2%Pe/min and 1.5%Pe/min in 75% -50% and 50% -40% load cycling ranges, respectively, and the maximum ramp rate during loading up processes is 1.5%Pe/min. That the live steam and reheat steam temperatures exceeding their thresholds limits for the load ramp rates. The subcritical power unit has a steam drum, serving as a substance and energy storage device, and allows partial decoupling of feedwater flow and coal flow. Consequently, an enhanced steam temperature control strategy, facilitated by adjusting the feedwater flow rate during the load ramp processes, was proposed. The feedwater flow rate is appropriately regulated during load cycling dynamic processes to assist the control of live steam and reheat steam temperatures. The models to obtain the live steam and reheat steam temperature variations influenced by the feedwater flow rates are developed, and implemented in the control strategy. Then, simulations on the reference power plant with the enhanced control strategy were conducted, and the temperature overshoots have been effectively suppressed. As a result, the load ramp rate is increased. For example, in the load cycling range of 75%-40%, the overall unit ramp rate is increased by 1%Pe/min, achieving an enhancement in the operational flexibility of subcritical units. Copyright © 2024 by ASME.

关键词： Coal

来源：评论

学校读者我要写书评

暂无评论

Review of spatial scale dispersion models (ATDMs) to simulate environmental dispersion and deposition of radionuclides and the overview of GIS coupling with dispersion models

International Journal of Advanced Nuclear Reactor Design and...

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2024年第4期6卷 256-280页

作者： Muhammad, Hussaini Xuan, Wang Wang, Mingjun Su, Guanghui School of Nuclear Science and Technology Shanxi Key Laboratory of Advanced Nuclear Energy and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China Abuja Nigeria

Estimation of the radiological consequences including the calculation of radiation doses to the exposed population requires numerical evaluation of atmospheric radioactive releases from nuclear facilities under accidental scenarios for implementation of adequate protective and other response actions to prevent or minimize severe deterministic effects and reduce the probability of occurrence of stochastic effects. This paper reviews various state-of-the-art spatial scale atmospheric dispersion models, known as the ATDMs, designed to evaluate atmospheric transport, dispersion, and depositions of radionuclide emissions from release sources. The ATDMs (atmospheric transport, dispersion, and deposition models) reviewed in this paper are FLEXPART, CALPUFF, LADAS, RASCAL, RIMPUFF, and HotSpot. These ATDMs are increasingly applied to perform probabilistic radiological risk assessment, which is one of the IAEA safety requirements for site evaluation of new NPP, and the calculated doses can be used to establish EPZs, an underlying basis of emergency preparedness. The numerical approaches, modeling methodology, advantages, limitations, scope of applications, and research investigations performed using these models in radiological and other environmental impact assessments within their scope of applications are presented. GIS has been widely recognized as a technique applied to aid the modeling of pollutant dispersion and visualization of model outputs in a spatial context, among other benefits. In nuclear accident consequence evaluation, spatial data provides key information such as accident location, range of radiological contamination, population density, etc, which are very important. This demonstrates the high significance of GIS-ATDMs coupling. Therefore, an overview of the coupling of dispersion models with GIS is also highlighted. © 2025 Xi'an Jiaotong University

关键词： Risk assessment

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：