检索结果-内蒙古大学图书馆

Preliminary Conceptual Design with Neutronics and Thermal-Hydraulics Assessments of Fustar

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Zhou, Xingguang Zhang, Dalin Li, Xinyu Lv, Xindi Jiang, Dianqiang Tian, Wenxi Qiu, Suizheng State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Lab. of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'An710049 China

The fluoride-salt-cooled high-temperature advanced reactor (FuSTAR) is an advanced small modular reactor, which aims to the electric supplement and clean heat production to western China. In this study, neutronics and thermal-hydraulics analysis are also carried out, and established the core layout and material ratio under the near-critical condition. The parameters of the designed core are evaluated quantitatively from various aspects. The results show that FuSTAR has sufficient shutdown depth, the equilibrium cycle is 3.24 years, and the discharge burnup depth is 106 GWd/MtU. The analysis of 1/6 core porous media shows that the peak fuel temperature under normal operating condition is 1009.3 K, which is far below the limit of 1573 K. Relevant design and analysis results can provide the reference for the subsequent small modular FHR design and construction. © 2023, The Authors. All rights reserved.

关键词： Computational fluid dynamics

Numerical Study on Benchmark Analysis of NACIE-UP Facility with Uniform and Non-Uniform power Distribution

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Li, Haoyang Zhang, Dalin Zhou, Lei Deng, Jian Tian, Wenxi Su, Guanghui Qiu, Suizheng State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi’an Jiaotong University Xi’an710049 China Nuclear Power Institute of China 328 Changshun Avenue Chengdu610213 China Science and Technology on Reactor System Design Technology Laboratory Nuclear Power Institute of China Chengdu610213 China

The NACIE-UP facility is located at the ENEA Brasimone Research Centre and is designed to investigate the thermo-hydraulic properties of LBE within a wire-spaced assembly under uniform and non-uniform power distribution conditions. In this study, the thermo-hydraulic characteristics of FPS are analyzed. ANSYS Fluent solver is applied with the COUPLE algorithm of RANS [[EQUATION]] model. Cheng&Tak correlation and computational conditions are implanted into Fluent in the form of UDFs. The results show that the RMSEs of ADP10SS1 and ADP10SS2 are 2.52 K and 3.69 K, 7.05 K and 8.48 K for ADP06SS1 and ADP06SS2, respectively, which indicate that the adopted models have good prediction ability for the temperature of the experimental conditions. Meanwhile, the heat transfer characteristics are investigated and compared with the correlations of Ushakov, Mikityuk, Kazimi and Carelli. Above all, this study provides quantitative and qualitative analysis for verification and validation of CFD/STH code and stand-alone CFD simulation. © 2024, The Authors. All rights reserved.

关键词： Heat transfer

Hydrodynamic Characteristics Prediction Models for Water-Cooled Wall Under Different Loads Based on Artificial Neural Network

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Yang, Jiahui Zhang, Yong Li, Ruiyu Han, Lei Yue, Yang Wang, Jin Deng, Lei Che, Defu State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an710049 China Yantai Longyuan Power Technology Co. Ltd Yantai264000 China Shunde Institute of Inspection Guangdong Institute of Special Equipment Inspection and Research Foshan528300 China

Real-time monitoring of hydrodynamic characteristics in water-cooled wall is crucial for boiler safety. Comprehensive numerical simulations are employed in this study to determine the heat flux distribution on the water-cooled wall across 38 different operating conditions. The heat flux results are applied to calculate hydrodynamic characteristics. Subsequently, the hydrodynamic characteristics results, along with the corresponding operating parameters, form the dataset for the Artificial Neural Network (ANN) models. The proposed methodology generates high-quality datasets, with a maximum root mean square error (RMSE) of only 6.8 K when comparing the results of working fluid temperature to the measured values. Two dataset partitioning methods are compared. Compared with random partitioning (control group), Considering each working condition as a whole during dataset partitioning (experimental group) reduces the average RMSE of predicted results in the test set by 47.6%, along with a 31.8% decrease in average number of neurons. The developed models exhibit excellent agreement with four working conditions in the test set, both in trends and absolute values, with acceptable error ranges. On the validation and test sets, the maximum RMSEs between the predicted and calculated values for flow rate, pressure, temperature and enthalpy are 0.033 kg s-1, 0.49 MPa, 5.7 K and 89.5 kJ kg-1, respectively, underscoring the reliability and practicality of the predictive models. © 2024, The Authors. All rights reserved.

关键词： Hydrodynamics

Investigation of Macro-fin Structure on Heat Transfer Performance of Close-Loop R410A Flashing Spray Cooling 15

学校读者我要写书评

暂无评论

Investigation of Macro-fin Structure on Heat Transfer Perfor...

15th Triennial International Conference on Liquid Atomization and Spray Systems, ICLASS 2021

作者： Zhou, Zhifu Ji, Renjie Chen, Bin Thrassos, Panidis State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China Laboratory of Applied Thermodynamics Mechanical Engineering Aeronautics Department University of Patras Rio Patras26504 Greece

The rapid development in performance, integration and miniaturization of electronics and other high power devices cause huge heat flux values. However, transitional cooling methods can hardly meet the requirement of dissipating effectively the high heat flux at the normal working temperature (usually smaller than 75 oC). The refrigerants flash evaporation spray cooling with phase change has been considered as one of the most promising technologies of heat dissipation for electronic devices and other high power devices due to its high heat removal capability at relatively low surface temperature, cooling uniformity, non-corrosivity. This study presents an experimental study on the heat transfer performance of the close-loop R410A flashing spray cooling, mainly focusing on the influence of macro-fin structure of cooling surface. The flat, square fin, pyramid fin surfaces and a newly designed tetrahedral fin surface are systematically examined. The results indicate that the newly designed tetrahedral fin surface has superior cooling performance than other fin surfaces. © 2021 ICLASS 2021 - 15th Triennial International Conference on Liquid Atomization and Spray Systems. All Rights Reserved.

关键词： Electronic cooling

Best estimate plus uncertainty analysis of the China advanced large-scale PWR during LBLOCA scenarios

学校读者我要写书评

暂无评论

International Journal of Advanced Nuclear Reactor Design and Technology 2020年 2卷 34-42页

作者： Chang, Yuhao Wang, Mingjun Zhang, Jing Tian, Wenxi Qiu, Suizheng Su, G.H. Department of Nuclear Science and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

China advanced large-scale Pressurized Water Reactor (PWR) implements series of passive safety systems to provide core cooling and decay heat removal in case of some unexpected accidents. The development of reactor best estimate system analysis codes has realized the transition from conservative safety analysis to Best Estimate plus Uncertainty (BEPU) analysis for the purpose of achieving more realistic results and digging larger safety margins. The BEPU analysis during Large Break Loss of Coolant Accident (LBLOCA) has been widely used for the licensing application of Nuclear power Plants (NPPs). In this paper, the BEPU analysis of China advanced large-scale PWR was performed under the conditions of LBLOCA scenarios employing RELAP5 code. The models of reactor coolant system with all the passive safety systems were established and the influence of uncertainties of important parameters on the Peak Cladding Temperature (PCT) was evaluated. The results show the obtained PTC (1314 K) through the BEPU analysis is far below the 10CFR50.46 PCT acceptance criteria (1477 K) in case of LBLOCA and is also lower than the conservative calculation value (1348 K), indicating a larger safety margin. This work provides a meaningful evaluation method for China advanced large-scale PWR safety assessment. © 2020 Xi'an Jiaotong University

关键词： Pressurized water reactors

Evaluation of R513A as an environmentally friendly alternative to R134a in spray cooling for laser surgery: Heat transfer performance and optimization

学校读者我要写书评

暂无评论

International Journal of Thermal Sciences 2025年 215卷

作者： He, Zhi-Zhong Lin, Xiang-Wei Li, Chen-Xi Kong, Chen Shen, Lin-Xin Zhou, Zhi-Fu State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shaanxi Xi'an710049 China School of Future Technology Xi'an Jiaotong University Shaanxi Xi'an710049 China Xi'an Jiaotong University Health Science Center Shaanxi Xi'an710049 China

Spray cooling plays a pivotal role in mitigating thermal injuries to the epidermis during laser surgery. However, the widespread use of R134a, a refrigerant with a high global warming potential (GWP) of 1300, poses significant environmental concerns. In this study, R513A, a more environmental-friendly cryogen with a GWP of 573, is used to investigate the feasibility of replacing R134a and the effects of spray height, spurt duration, nozzle orifice diameter, and spray pressure on R513A spray cooling through a self-built open-loop spray system. Experimental results demonstrate that R513A exhibits superior cooling performance, achieving a minimum surface temperature (Tmin) 12 °C lower and a maximum heat flux (qmax) 27.5 % higher than R134a. Additionally, R513A offers a broader optimal spray height range (30–50 mm) in which Tmin is 4 °C and 13 °C lower than those at 20 mm and 10 mm, respectively. qmax in this range is 10 % and 16 % higher than those at 20 mm and 10 mm, respectively. While extending the spurt duration consumes more cryogen and prolongs the liquid film lifetime, the differences in Tmin and qmax are less than 4 °C and 10 kW/m2. With the nozzle orifice increasing from 0.6 mm to 1.0 mm, Tmin remains approximately −42 °C but qmax gradually increases by 6 kW/m2. Macroscopic analysis reveals that higher spray pressure induces a more dispersive spray, though this does not significantly improve cooling efficiency. To advance the understanding of R513A spray cooling dynamics, a dimensionless correlation was developed to predict the dynamic heat transfer coefficient across diverse conditions. This study not only highlights the potential of R513A as a sustainable alternative but also provides critical insights into optimizing spray cooling parameters for enhanced thermal management in laser surgery. © 2025 Elsevier Masson SAS

关键词： Chilling

Evaluation of a Numerical Model for Predicting flow and Heat Transfer in a Hexagonal Helical Cruciform Seven-Rods Bundle and Analysis of Rod Bundle Size Independence

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Jiang, Dianqiang Deng, Jian Zhang, Dalin Zhou, Xingguang Xiao, Changzhi Tian, Wenxi Qiu, Suizheng Su, Guanghui H. State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi’an Jiaotong University Xi’an710049 China Nuclear Power Institute of China Science and Technology on Reactor System Design Technology Laboratory Chengdu610213 China China Institute of Atomic Energy Beijing611731 China

In this study, the accuracy and applicability of the numerical model are comprehensively evaluated based on the experimental data of a hexagonal helical cruciform (HC) seven-rods bundle. The STAR CCM+ is utilized as a tool to obtain predicted results of flow and heat transfer in different flow regions. The numerical results indicate that it is an improved method to set a negative heat flux on the hexagonal wall in the laminar flow region. The Reynolds stress transport model can accurately predict the experimental results of heat transfer in the transitional flow region, with an average wall temperature deviation of 2.8℃. The SST k-ω model with cubic constitutive option can accurately predict the experimental results of the flow resistance, and a relative error of f is 1.8%. In the turbulent flow region, the SST k-ω model with cubic constitutive option provides an accurate prediction, with an average wall temperature deviation of 3.7℃. The realizable k-Ε two-layer model can accurately predict the flow resistance, and the relative error of f is 0.1%. The preferred numerical model is used to analyze the size independence of the HC rod bundle. This work provides certain guidelines for the accurate simulation in the HC seven-rods bundle. © 2024, The Authors. All rights reserved.

关键词： Computational fluid dynamics

Pani Grafted Onto Waste Poros Polyurethane for Co-Adsorption of multiple Pollutants in Industrial Wastewater

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Wang, Ning Guo, Yirui Song, Yi Yan, Wei Gong, Xuesong Li, Yunfeng Mu, Ruihua Liu, Yonghong Zhang, Luohong School of Environmental and Chemical Engineering Xi'an Polytechnic University Xi'An710048 China Department of Environmental Science and Engineering State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'An710049 China

Up-taking the pollutants simultaneously from industrial wastewater is an urgent in the advanced treatment. In this work, the polyaniline (PANI)-based efficient adsorbent supported by the waste polyurethane(PU) was designed for synchronous adsorption of pollutants (acid red G (ARG), methylene blue (MB), hexavalent chromium Cr(VI), phosphorus (TP), NH4+-N (ammonia nitrogen), NO3-N (nitrate nitrogen) and COD (chemical oxygen demand)). The results showed that the synchronous removal efficiency of ARG, MB, Cr(VI), TP, NH4+-N, NO3-N and COD in simulated wastewater reached 88%, 40%, 90%, 58%, 42%, 30% and 63%, respectively. The adsorption lasted for 1800 min (144 columns) before saturation, and no significant decrease was observed after 5 cycles of regeneration. Combined with the XPS (X-ray photoelectron spectroscopy) and EEM (excitation-emission matrix spectroscopy) analysis, ARG, Cr(VI), NO3-N and TP competed for the same adsorption sites, and the adsorption affinity order was ARG>Cr(Ⅵ)>TP>NO3-. During the adsorption process, Cr(VI) and =N- in PANI chain underwent redox reaction to form Cr(III) and -NH+-, which further promoted the adsorption of anionic pollutants, like H2PO4-. Redox reactions also occurred between Cr(VI) and MB before adsorption forming Cr(III) and small organic fragments. These conclusions prove the feasibility and effectiveness of PU-P/T as a potential engineering adsorbent for co-adsorption of a variety of pollutants. © 2023, The Authors. All rights reserved.

关键词： Adsorption

Thermodynamic Analysis and Optimization of Two-Step Supercritical Water Desorption-Gasification System of Oily Sludge

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Zhang, Chenghao Wang, Gaoyun Zhao, Qiuyang Gao, Yunbo Ge, Zhiwei Jin, Hui Guo, Liejin State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University No. 28 Xianning West Road Xi’an710049 China Technical Inspection Center Sinopec Shengli Oilfield Company Dongying257000 China

The two-step supercritical water desorption-gasification (TSSCWDG) technology can significantly improve the gasification efficiency of oil sludge. However, few works have been conducted to explore the influence of operating parameters on this process. In this paper, a novel desorption-gasification process modeling was constructed based on the supercritical water gasification (SCWG) of oily sludge and the influences of different operating parameters on the system efficiencies were investigated. Increasing the separation temperature and the desorption levels can achieve the rapid improvement of the efficiencies of the TSSCWDG system, but more desorption levels may increase the complexity of the system and the operating cost. The desorption temperature had a relatively small impact on the system efficiencies, but the lower desorption temperature was beneficial to the utilization of industrial waste heat and decreasing the operating cost. Moreover, the TSSCWDG system was optimized and analyzed, and the optimized system had achieved the energy matching between the gasification products and unites, resulting in significant reduction of the irreversible losses in each unit, which the energy efficiency of the optimized system reached 83.4%. This work could provide essential theoretical guidance for the scale-up and design of the industrial application of SCWG of oil sludge with hydrogen production. © 2024, The Authors. All rights reserved.

关键词： Desorption