检索结果-内蒙古大学图书馆

SSRN 2024年

作者： Gong, Haowei Liao, Haibin Ai, Zhe Deng, Yizhou Wei, Zhe School of Electronic and Electrical Engineering Wuhan Textile University Wuhan430200 China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan430200 China

In response to the issues of high computational complexity, large model size, and high computational resource requirements in deep learning-based detection models, an improved lightweight clothing image detection algorithm based on YOLOv8n is proposed. Firstly, some GhostConv are employed to replace ordinary Conv in benchmark model to reduce the number of parameters. Additionally, we design a C2f-GD module to enhanced the bottleneck structure in the C2f architecture by using GhostConv and DCNv2 modules, which can improve compression detection performance while reducing model size and parameter count. Finally, the Inner EIoU loss function is substituted for the original CIoU loss function to enhance the regression analysis performance of the model’s bounding boxes. Experimental results on the open-source fashion dataset Deepfashion2 demonstrate that the lightweight clothing image prediction network demonstrates a significant level of reduced size and parameter count, improved detection accuracy. Compared to the YOLOv8n benchmark model, the proposed model achieves a 1.1% increase in precision and a 2.6%increase in mean average precision(mAP),while reducing model size and parameter count by 0.65MB and 0.315×109,which has good practical value. © 2024, The Authors. All rights reserved.

关键词： Regression analysis

来源：评论

学校读者我要写书评

暂无评论

Structure modifications of wood-based materials for water treatment applications: A review

引用

materials Today 2025年 87卷 252-286页

作者： Zhu, Yaqin Wang, Shiyuan Liu, Yanbo Han, Jingquan Duan, Gaigai Fu, Qiliang Han, Xiaoshuai Zhang, Chunmei He, Shuijian Jiang, Shaohua Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources International Innovation Center for Forest Chemicals and Materials College of Materials Science and Engineering Nanjing Forestry University Nanjing210037 China State Key Laboratory of New Textile Materials and Advanced Processing Technologies School of Textile Science and Engineering Wuhan Textile University Wuhan430200 China Institute of Materials Science and Devices School of Materials Science and Engineering Suzhou University of Science and Technology Suzhou215009 China

With global freshwater scarcity and increasing water pollution due to industrial and agricultural activities, there is an urgent need for sustainable, high-performance water treatment materials. Conventional filtration and adsorption materials, such as polymer membranes and activated carbon, often suffer from high energy consumption, secondary pollution, and high production costs. In contrast, wood-based materials offer hierarchical porosity, natural adsorption sites, and tunable surface chemistry, making them a promising candidate for low-cost and environmentally friendly water treatment applications. In this review, we introduced the structure and properties of wood and described how these affect the preparation and water treatment properties of wood-based materials. We also summarized the structure design strategies for wood-based materials, mainly including delignification treatment, nanomaterials modification, functional group modification, and carbonation modification. In addition, we presented a comprehensive investigation of advances in the application of wood-based materials in water treatment with the aim of comparing, analyzing, and evaluating the practical functionality in sterilization, heavy metal ion removal, organic pollutants removal, oil/water separation, and desalination. Finally, we presented the serious challenges and new perspectives for wood-based materials in water treatment. © 2025 Elsevier Ltd

关键词： River pollution

来源：评论

学校读者我要写书评

暂无评论

基于一步法制备超高PEO负载的亲CO_(2)气体分离膜用于高效碳捕集

引用

Engineering 2023年第7期26卷 220-228,I0009页

作者：朱斌赫羴珊吴亚东李松伟邵路 MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage State Key Laboratory of Urban Water Resource and EnvironmentSchool of Chemistry and ChemicalHarbin Institute of TechnologyHarbin 150001China Key Laboratory of Materials Processing and Mold(Zhengzhou University) Ministry of EducationNational Engineering Research Center for Advanced Polymer Processing Technology Department of Chemical EngineeringZhengzhou UniversityZhengzhou 450002China

针对日益增加的大气CO_(2)含量,膜技术被认为是一种有前景的碳捕集策略,其中亲CO_(2)分离膜已经展示出显著的应用潜力,特别是在CO_(2)/轻质气体分离方面。以聚环氧乙烷(PEO)为代表的CO_(2)亲和材料,因其与CO_(2)的特殊偶极-四极矩相互... 详细信息

针对日益增加的大气CO_(2)含量,膜技术被认为是一种有前景的碳捕集策略,其中亲CO_(2)分离膜已经展示出显著的应用潜力,特别是在CO_(2)/轻质气体分离方面。以聚环氧乙烷(PEO)为代表的CO_(2)亲和材料,因其与CO_(2)的特殊偶极-四极矩相互作用而吸引了广泛的研究关注。在此,我们报道了一种简便的一步合成方案,通过原位聚合高度柔性的小分子PEO来克服其高结晶度和低机械强度的局限性。得益于短链PEO与聚合物基体之间的复杂链缠绕,使线性PEO的负载高达90%(质量分数)。因此,分离性能轻松超过了著名的分离上限。此外,高结构稳定性使得分离膜在高进料压力(高达20 bar)下表现出更好的CO_(2)渗透系数和气体选择性。本研究同时改善了全聚合物膜的机械性能和气体分离性能,在工业碳捕集和气体净化领域展现出显著潜力。

关键词： Membrane separation Gas separation CO_(2)capture CO_(2)-philic membrane Poly(ethylene oxide)

来源：评论

学校读者我要写书评

暂无评论

Three-dimensional-printed Ni-based scaffold design accelerates bubble escape for ampere-level alkaline hydrogen evolution reaction

引用

Interdisciplinary materials 2024年第4期3卷 595-606页

作者： Jingxuan Chen Gangwen Fu Yu Tian Xingchuan Li Mengqi Luo Xiaoyu Wei Ting Zhang Tian Gao Cheng Chen Somboon Chaemchuen Xi Xu Xing Sun Tongle Bu Francis Verpoort John Wang Zongkui Kou State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhanChina Marine New Materials and Equipment Technology Center Sanya Science and Education Innovation Park of Wuhan University of TechnologySanyaChina Frontiers Science Center for Flexible Electronics Institute of Flexible ElectronicsNorthwestern Polytechnical UniversityXi'anChina Key laboratory of Flexible Electronics of Zhejiang Province Ningbo Institute of Northwestern Polytechnical UniversityNingboChina School of Astronautics Northwestern Polytechnical UniversityXi'anChina Department of Materials Science and Engineering College of Design and EngineeringNational University of SingaporeSingaporeSingapore National University of Singapore(Chongqing)Research Institute Chongqing Liang Jiang New AreaChongqingChina

Alkaline hydrogen evolution reaction(HER)for scalable hydrogen production largely hinges on addressing the sluggish bubble-involved kinetics on the traditional Ni-based electrode,especially for ampere-level current densities and ***,3D-printed Ni-based sulfide(3DPNS)electrodes with varying scaffolds are designed and *** situ observations at microscopic levels demonstrate that the bubble escape velocity increases with the number of hole sides(HS)in the ***,we conduct multiphysics field simulations to illustrate that as the hole shapes transition from square,pentagon,and hexagon to circle,where a noticeable reduction in the bubble-attached HS length and the pressure balance time around the bubbles results in a decrease in bubble size and an acceleration in the rate of bubble ***,the 3DPNS electrode with circular hole configura-tions exhibits the most favorable HER performance with an overpotential of 297 mV at the current density of up to 1000 mA cm^(-2) for 120 *** present study highlights a scalable and effective electrode scaffold design that promotes low-cost and low-energy green hydrogen production through the ampere-level alkaline HER.

关键词： 3D printing alkaline hydrogen evolution reaction ampere-level current densities bubble escape hole sides

来源：评论

学校读者我要写书评

暂无评论

Se-Ni Se_(2) hybrid nanosheet arrays with self-regulated elemental Se for efficient alkaline water splitting

引用

Journal of materials Science & technology 2022年第23期118卷 145-152页

作者： Xiang Peng Yujiao Yan Shijian Xiong Yaping Miao Jing Wen Zhitian Liu Biao Gao Liangsheng Hu Paul K.Chu Hubei Key Laboratory of Plasma Chemistry and Advanced Materials Hubei Engineering Technology Research Center of Optoelectronic and New Energy MaterialsWuhan Institute of TechnologyWuhan 430205China Department of Physics Department of Materials Science and EngineeringDepartment of Biomedical EngineeringCity University of Hong KongTat Chee AvenueKowloonHong KongChina School of Textile Science and Engineering Xi’an Polytechnic UniversityXi’an 710048China State Key Laboratory of Refractories and Metallurgy Institute of Advanced Materials and NanotechnologyWuhan University of Science and TechnologyWuhan 430081China Department of Chemistry Key Laboratory for Preparation and Application of Ordered Structural Materials of Guangdong ProvinceShantou UniversityShantou 515063China

Understanding the catalytic mechanism of non-noble transition metal electrocatalysts is crucial to designing high-efficiency,low-cost,and durable alternative electrocatalysts for water splitting which comprises the hydrogen evolution reaction(HER) and oxygen evolution reaction(OER).In this work,Se-NiSe_(2) hybrid nanosheets with a self-regulated ratio of ionic Se(I-Se) to elemental Se(E-Se) are designed on carbon cloth by solution synthesis and hydrothermal *** effects of the I-Se/E-Se ratios on the electrocatalytic characteristics in HER and OER are investigated systematically both experimentally and *** optimized bifunctional electrocatalyst needs overpotentials of only 133 mV to deliver an HER current density of 10 mA cm^(-2) and 350 mV to generate an OER current density of 100 mA cm^(-2) in1.0 mol L^(-1) *** on the density-functional theory calculation,surface-adsorbed E-Se is beneficial to optimizing the electron environment and the adsorption/desorption free energy of hydrogen/water of the hybrid catalyst,consequently facilitating the electrocatalytic water splitting *** is a proper I-Se/E-Se ratio to improve the catalytic activity and kinetics of the reaction and the optimized E-Se adsorption amount can balance the interactions between I-Se and E-Se,so that the catalyst can achieve appropriate Se-H binding and active site exposure for the excellent electrocatalytic *** demonstrate the practicality,the assembled symmetrical device can be powered by an AA battery to produce hydrogen and oxygen *** results provide a deeper understanding of the catalytic mechanism of transition metal selenides in water splitting and insights into the design of high-efficiency and low-cost electrocatalysts in energy-related applications.

关键词： Nickel selenide Self-regulation Bifunctional electrocatalysst Water splitting Alkaline hydrogen evolution reaction

来源：评论

学校读者我要写书评

暂无评论

Doping Induced Diatomic Active Sites Over Moo3-X for Efficient and Stable Photocatalytic N2 Reduction to Ammonia

SSRN

引用

SSRN 2024年

作者： Yu, Xinru Wang, Yongchao Ding, Jian Li, Zhen He, Bing Zeng, Zhaowu Xu, Xiangran Liu, Xiaoyi Wang, Huan Wang, Yang Faculty of Materials Science and Chemistry China University of Geosciences Wuhan430074 China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile University Wuhan430200 China

The photocatalytic N2 reduction under ambient conditions offers a promising alternative to the energy-intensive and carbon-emitting Haber-Bosch process. However, unidirectional or symmetric adsorption between the active sites of a single metal and nitrogen molecules is not sufficient to activate the inert N2, thus limiting the further improvement of the nitrogen fixation performance. Here, Fe dopant has been introduced into MoO3-x nanowires by replacing Mo atoms to form Fe-Mo bimetallic active sites for nitrogen fixation under natural conditions. Experimental and theoretical findings demonstrate that the introduction of Fe induces a significant polarization in the charge structure of active site. In contrast to the conventional nitrogen fixation step, the Fe-Mo active sites shifted the N2 hydrogenation from the associative alternating pathway to the more advantageous associative distal pathway by promoting N2 adsorption/activation and lowering the energetic barriers of the rate-limiting step during nitrogen reduction. Moreover, the improved stability suggests that the doped Fe can act as a charge-compensating species, accepting electrons and therefore effectively improving the stability of oxygen-containing vacancy catalysts. Thus Fe-doped MoO3-x exhibits a nitrogen fixation performance of 742.92 μmol g-1 h-1. This study provides valuable insights into the design of catalysts based on their electronic structure and optimizing photocatalytic nitrogen fixation. © 2024, The Authors. All rights reserved.

关键词： Molybdenum oxide

来源：评论

学校读者我要写书评

暂无评论

Structure-guided multiscale feature interaction based real-time dehazing network

Structure-guided multiscale feature interaction based real-t...

引用

Artificial Intelligence, Networking and Information technology (AINIT), International Seminar on

作者： Shengjie Yang Yuan Li School of Electronic and Electrical Engineering Wuhan Textile University Wuhan Hubei China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile University Wuhan Hubei China

ISBN: (数字)9798350385557

ISBN: (纸本)9798350385564

Addressing the current limitations of outdoor dehazing methods, which overlook the specificity of target structures in image content, resulting in incomplete reconstruction of image structures, and the challenge of meeting real-time requirements for subsequent visual tasks with numerous structurally complex dehazing models. In this paper, we propose a structure-guided detail enhancement dehazing module based on prior knowledge of target structure in the image. Simultaneously, we effectively avoid redundant feature information by employing partial convolution, reducing the overall computational complexity of the model. During the downsampling process, we extract multi-scale feature information to enhance the model's feature extraction capability. In the reconstruction stage, we strengthen the interaction between features of different resolutions, achieving an efficient and straightforward real-time dehazing network. Extensive experiments on various dehazing task datasets demonstrate the effectiveness of our proposed model. With only 3.11 million parameters and 13.07 billion FLOPs, our model achieves an SSIM of over 0.988 on the SOTS-outdoor dataset. Larger model structures result in improved performance, as detailed in the experimental section.

关键词： Seminars Image resolution Computational modeling Feature extraction Visual effects Real-time systems Task analysis

来源：评论

学校读者我要写书评

暂无评论

Preparation of meter-scale Cu foils with decimeter grains and the use for the synthesis of graphene films

引用

Journal of Materiomics 2024年第1期10卷 1-6页

作者： Ruitao Jia Fangzhu Qing Shurong Wang Yuting Hou Changqing Shen Feng Hao Yang Yang Hongwei Zhu Xuesong Li School of Integrated Circuit Science and Engineering(Exemplary School of Microelectronics) University of Electronic Science and Technology of ChinaChengdu610054China State Key Laboratory of Electronic Thin Films and Integrated Devices University of Electronic Science and Technology of ChinaChengdu610054China Shenzhen Institute for Advanced Study University of Electronic Science and Technology of ChinaShenzhen518110China School of Materials and Energy University of Electronic Science and Technology of ChinaChengdu610054China PipeChina Southwest Pipeline Co. Ltd.Chengdu610041China State Key Lab of New Ceramics and Fine Processing School of Materials Science and EngineeringTsinghua UniversityBeijing100084China

Chemical vapor deposition(CVD)is the most promising method for the preparation of high-quality and large-area graphene films,especially the epitaxial growth of graphene on large-area single-crystal Cu *** single-crystal Cu foils are normally achieved by thermally annealing the commercial poly-crystalline Cu foils,their size and therefore the size of graphene films grown on them are limited to the size of the reaction *** report a simple and feasible method to prepare large-area Cu foils with decimeter grains by thermally annealing the rolled-up Cu foils,where the Cu layers are separated by thin porous carbon fiber *** carbon fiber cloths prevent Cu layers from sticking to each other at high temperatures while do not block the gas *** such a way,the utilization efficiency of the reaction chamber is significantly improved,e.g.,0.2 m×(1e2)m Cu foils can be processed even in a 5 cm diameter quartz tube ***-quality graphene films grown on such Cu foils are then *** method may be suitable for the annealing of other metal foils to enlarge grain size and the synthesis of other two-dimensional materials on them such as h-BN.

关键词： Graphene Single-crystal Cu Chemical vapor deposition Synthesis

来源：评论

学校读者我要写书评

暂无评论

Low Viscosity Polyurethane Modified Epoxy Resin Grouting for Steel Ring Reinforcement of Subway Tunnel 2

Low Viscosity Polyurethane Modified Epoxy Resin Grouting for...

引用

2022 2nd International Conference on Fluid and Chemical Engineering, ICFCE 2022

作者： Huang, Liang Xiao, Ming Li, Weilong Bi, Shuguang Tang, Jiagong Luo, Xianmeng Ran, Jianhua Hubei Key Laboratory of Biomass Fibers and Eco-Dyeing & Finishing State Key Laboratory of New Textile Materials and Advanced Processing Technologies College of Chemistry and Chemical Engineering Wuhan Textile University Wuhan430200 China Wuhan Rongshengjimei Technology Co. Ltd. Wuhan430050 China

Steel ring reinforcement technology is an effective method to eliminate the damage of tunnel structure caused by ground load, surrounding foundation pit and underground water source. The grouting material used to fill the gap between the tunnel segment and the steel ring should have the characteristics of low viscosity, high strength, rapid curing at room temperature and anti-subway vibration. In this work, a special polyurethane modified epoxy resin grouting was fabricated to overcome the inherent brittleness of epoxy resin, and was combined with the reactive diluent and the amine curing agent to suit the above applications. The results showed that both tensile and impact strength of epoxy resin grouting modified by polyurethane were improved obviously compared with those without modification, presenting an obvious toughening effect. Although the viscosity increased slightly, it can still meet the perfusion requirements of steel ring reinforcement of subway tunnels. © Published under licence by IOP Publishing Ltd.

关键词： Epoxy resins

来源：评论

学校读者我要写书评

暂无评论

Flexible Fly-Eye-Shaped Triboelectric Nanogenerator for All Directions and Highly Efficient Biomechanical Energy Harvesting and Human Motion Monitoring

SSRN

引用

SSRN 2024年

作者： Yan, Dali Tao, Dan Xu, Duo Sun, Yirong Deng, Bo Cao, Genyang Fang, Jian Xu, Weilin State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile University Hubei Wuhan430200 China College of Textile and Clothing Engineering Soochow University Suzhou215123 China

As an environmentally friendly and renewable energy source, triboelectric nanogenerator (TENG) offers a fresh solution to the energy scarcity problem. However, the conventional three-dimensional (3D) TENG, which exhibits heavy angular dependence in energy harvesting, struggles to efficiently capture complex biological kinetic energy in practical applications. This study addresses this challenge by developing a novel flexible fly-eye-shaped triboelectric nanogenerator (F-TENG). In comparison with traditional 3D flexible-based TENG, this generator notably minimizes the angular dependence on motion direction. Particularly for non-vertical mechanical energy harvesting, F-TENG can enhance collection efficiency by 35.5%. Experimental results demonstrate that the open-circuit voltage and current of F-TENG textiles are 3-fold and 2.6-fold higher, respectively than those of conventional 3D flexible-based TENG. Its accuracy in detecting and identifying complex motions reaches 86.8%, marking a 37.8% improvement over traditional 3D-TENG. This study presents a promising perspective on the structural design of all directions and highly efficient biomechanical energy harvesting and its application in the field of intelligent sensing. © 2024, The Authors. All rights reserved.

关键词： textiles

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：