检索结果-内蒙古大学图书馆

In situ generated layered NiFe-LDH/MOF heterostructure nanosheet arrays with abundant defects for efficient alkaline and seawater oxidation

引用

Nano Research 2023年第7期16卷 8945-8952页

作者： Manjie Xiao Can Wu Jiawei Zhu Chengtian Zhang Yan Li Jiahui Lyu Weihao Zeng Haiwen Li Lei Chen Shichun Mu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Foshan Xianhu Laboratory Foshan 528200China Science and Technology Institute of Advanced Technology Wuhan 430051China Hefei General Machinery Research Institute Hefei 230031China

As the main limiting step of overall water splitting,oxygen evolution reaction(OER)is urgent to be enhanced by developing efficient catalysts to promote the process of electrolytic *** on theoretical analysis,the Ni-metal-organic framework(Ni-MOF)and NiFe-layered double hydroxide(NiFe-LDH)(NiFe-LDH/MOF)heterostructure can optimize the energy barrier of the OER process and decrease the adsorption energy of oxygen-containing intermediates,effectively accelerating the OER ***,layered NiFe-LDH/MOF heterostructures are in situ constructed through a facile two-step reaction process,with substantial oxygen defects and lattice defects that further improve the catalytic *** a result,only 208 and 275 mV OER overpotentials are needed for NiFe-LDH/MOF to drive the current densities of 20 and 100 mA·cm^(-2)in 1 M KOH solutions,and even maintain catalytic stability of 100 h at 20 mA·cm^(-2).When applied to seawater oxidation,only 235 and 307 mV OER overpotentials are required to achieve the current densities of 20 and 100 mA·cm^(-2),respectively,with almost no attenuation for 100 h stability test at 20 mA·cm^(-2),all better than commercial RuO_(2).This work provides the theoretical and experimental basis and a new idea for efficiently driving fresh water and seawater cracking by heterostructure and defect coupling design toward catalysts.

关键词： oxygen evolution reaction defects seawater electrolysis catalyst

来源：评论

学校读者我要写书评

暂无评论

Heterogeneous Cu_(x)O Nano‑Skeletons from Waste Electronics for Enhanced Glucose Detection

引用

Nano-Micro Letters 2024年第11期16卷 554-568页

作者： Yexin Pan Ruohan Yu Yalong Jiang Haosong Zhong Qiaoyaxiao Yuan Connie Kong Wai Lee Rongliang Yang Siyu Chen Yi Chen Wing Yan Poon Mitch Guijun Li Center on Smart Manufacturing Division of Integrative Systems and DesignThe Hong Kong University of Science and TechnologyClear Water BayKowloonHong Kong SAR 999077People’s Republic of China The Sanya Science and Education Innovation Park of Wuhan University of Technology Sanya 572000People’s Republic of China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200People’s Republic of China

Electronic waste(e-waste)and diabetes are global challenges to modern ***,solving these two challenges together has been challenging until ***,we propose a laser-induced transfer method to fabricate portable glucose sensors by recycling copper from *** bring up a laser-induced full-automatic fabrication method for synthesizing continuous heterogeneous Cu_(x)O(h-Cu_(x)O)nano-skeletons electrode for glucose sensing,offering rapid(<1 min),clean,air-compatible,and continuous fabrication,applicable to a wide range of Cu-containing *** this approach,h-Cu_(x)O nanoskeletons,with an inner core predominantly composed of Cu_(2)O with lower oxygen content,juxtaposed with an outer layer rich in amorphous Cu_(x)O(a-Cu_(x)O)with higher oxygen content,are derived from discarded printed circuit *** employed in glucose detection,the h-Cu_(x)O nano-skeletons undergo a structural evolution process,transitioning into rigid Cu_(2)O@CuO nano-skeletons prompted by electrochemical *** transformation yields exceptional glucose-sensing performance(sensitivity:9.893 mA mM^(-1) cm^(-2);detection limit:0.34μM),outperforming most previously reported glucose *** functional theory analysis elucidates that the heterogeneous structure facilitates gluconolactone *** glucose detection device has also been downsized to optimize its scalability and portability for convenient integration into people’s everyday lives.

关键词： Copper oxide Electron 3D tomography E-waste Glucose detection Electrochemical activation

来源：评论

学校读者我要写书评

暂无评论

Self-powered sensor based on compressible ionic gel electrolyte for simultaneous determination of temperature and pressure

引用

InfoMat 2024年第7期6卷 62-75页

作者： Junjie Zou Yanan Ma Chenxu Liu Yimei Xie Xingyao Dai Xinhui Li Shuxuan Li Shaohui Peng Yang Yue Shuo Wang Ce-Wen Nan Xin Zhang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Center of Smart Materials and Devices&International School of Materials Science and EngineeringWuhan University of TechnologyWuhanthe People's Republic of China Hubei Key Laboratory of Energy Storage and Power Battery School of MathematicsPhysics and Optoelectronic EngineeringHubei University of Automotive TechnologyShiyanthe People's Republic of China Information Materials and Intelligent Sensing Laboratory of Anhui Province Key Laboratory of Structure and Functional Regulation of Hybrid Materials of Ministry of EducationInstitutes of Physical Science and Information TechnologyAnhui UniversityHefeithe People's Republic of China State Key Lab of New Ceramics and Fine Processing School of Materials Science and EngineeringTsinghua UniversityBeijingthe People's Republic of China

The simultaneous detection of multiple stimuli,such as pressure and temperature,has long been a persistent challenge for developing electronic skin(eskin)to emulate the functionality of human ***,the demand for integrated power supply units is an additional pressing concern to achieve its lightweightness and ***,we propose a self-powered dual temperature–pressure(SPDM)sensor,which utilizes a compressible ionic gel electrolyte driven by the potential difference between MXene and Al *** SPDM sensor exhibits a rapid and timely response to changes in pressure-induced deformation,while exhibiting a slow and hysteretic response to temperature *** distinct response characteristics enable the differentiation of current signals generated by different stimuli through machine learning,resulting in an impressive accuracy rate of 99.1%.Furthermore,the developed SPDM sensor exhibits a wide pressure detection range of 0–800 kPa and a broad temperature detection range of 5–75C,encompassing the environmental conditions encountered in daily human *** dual-mode coupled strategy by machine learning provides an effective approach for temperature and pressure detection and discrimination,showcasing its potential applications in wearable electronics,intelligent robots,human–machine interactions,and so on.

关键词： e-skin gel electrolyte machine learning self-powered dual-mode sensor

来源：评论

学校读者我要写书评

暂无评论

One-step constructing advanced N-doped carbon@metal nitride as ultra-stable electrocatalysts via urea plasma under room temperature

引用

Chinese Chemical Letters 2024年第11期35卷 486-491页

作者： Tao Tang Chen Li Sipu Li Zhong Qiu Tianqi Yang Beirong Ye Shaojun Shi Chunyang Wu Feng Cao Xinhui Xia Minghua Chen Xinqi Liang Xinping He Xin Liu Yongqi Zhang Institute of Fundamental and Frontier Science University of Electronic Science and Technology of ChinaChengdu 611731China Department of Materials Science and Engineering Zhejiang UniversityHangzhou 310027China College of Materials Science&Engineering Zhejiang University of TechnologyHangzhou 310014China School of Chemistry and Materials Engineering Changshu Institute of TechnologyChangshu 215500China State Key Laboratory of Electronic Thin Film and Integrated Devices University of Electronic Science and Technology of ChinaChengdu 611731China Department of Engineering Technology Huzhou CollegeHuzhou 313000China Key Laboratory of Engineering Dielectric and Applications(Ministry of Education) School of Electrical and Electronic EngineeringHarbin University of Science and TechnologyHarbin 150080China State Key Laboratory of Photocatalysis on Energy and Environment Fuzhou UniversityFuzhou 350116China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200China

Highly active transition metal nitrides are desirable for electrocatalytic reactions,but their long-term stability is still unsatisfactory and thus limiting commercial ***,for the first time,we report a unique and universal room-temperature urea plasma method for controllable synthesis of N-doped carbon coated metal(Fe,Co,Ni,etc.)nitrides arrays *** preformed metal oxides arrays can be successfully converted into metal nitrides arrays with preserved nanostructures and a thin layer of N-doped carbon(N-C)via one-step urea ***,as a representative case,N-C@CoN nanowire arrays are illustrated and corresponding formation mechanism by plasma is ***,the designed N-C@Co N catalysts deliver excellent electrocatalytic activity and long-term stability both in oxygen evolution reaction(OER)and urea oxidation reaction(UOR).For OER,a low overpotential(264 mV at 10 mA/cm^(2))and high stability(>50 h at 20 mA/cm^(2))are *** UOR,a current density of100 m A/cm^(2) is achieved at only 1.39 V and maintain over 100 *** calculations reveal that the synergetic coupling effect of CoN and N-C can significantly facilitate the charge-transfer process,optimize adsorbed intermediates binding strength and further greatly decrease the energy *** strategy provides a novel method for fabrication of N-C@metal nitrides as highly active and stable catalysts.

关键词： Urea plasma Metal nitrides Carbon shell Oxygen evolution reaction Urea oxidation reaction

来源：评论

学校读者我要写书评

暂无评论

Programming an efficient technique for designing smart C-doped MIC with dual self-protection forinformation and high-energy

引用

Rare Metals 2024年第12期43卷 6694-6703页

作者： Xiao-Gang Guo Tao-Tao Liang Hui-Sheng Huang Bin-Fang Yuan Fu-Lan Zhang Yi-Huang Chen Lu Liu Xun Cui Chongqing Key Laboratory of Inorganic Special Functional Materials College of Chemistry and Chemical EngineeringYangtze Normal UniversityChongqing408100China Department of Orthopedic Surgery Chongqing Sports Medicine CenterSouthwest HospitalThe Third Military Medical UniversityChongqing400038China College of Chemistry and Materials Engineering Wenzhou UniversityWenzhou325035China Institute of Sustainability for Chemicals Energy and Environment(ISCE2)Agency for ScienceTechnology and ResearchSingapore627833Singapore State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan430200China

Constructing self-protected metastable intermolecular composites(MICs) enables the regulation of microstructures towards boosting controllable detonation performance,and also prevents information leakage,which is meaningful but ***,a convenient and efficient method of combining highly-controlled electrophoretic assembly,surface modification and microwave heat treatment was employed to design promising heattriggered wettability switchable high-energy smart C-doped Al/Cr_(2)O_(3)MIC,and surface modification mechanism was proposed,*** anti-wetting ability of the product was demonstrated by a series of tests of water contact angle,impact resistance,immersion,selfcleaning,*** key information recording/encryption procedures were realized by constructing a hydrophilic/hydrophobic interface and adjusting the wettability of the *** addition,the output heat of asobtained smart MIC can reach ~1.5 kJ·g^(-1),and its attenuation rate was only ~30% even after underwater aging,further verifying its potential ***,our design provides a promising strategy for engineering smart MIC with diversified functional structures for blasting applications and beyond.

关键词： High-energy MIC Information self-protection Exothermicity Stability

来源：评论

学校读者我要写书评

暂无评论

Color prediction model of BP neural network based on multi-source feature fusion 5

Color prediction model of BP neural network based on multi-s...

引用

5th International Seminar on Artificial Intelligence, Networking and Information technology, AINIT 2024

作者： Wu, Xinru Yuan, Li School of Electronic and Electrical Engineering Wuhan Textile University Hubei Wuhan China School of Electronic and Electrical Engineering Wuhan Textile University State Key Laboratory of New Textile Materials and Advanced Processing Technologies Hubei Wuhan China

ISBN: (纸本)9798350385557

Aiming at the limitation of fabric color characterization with a single data source, multi-source data feature fusion method was used to characterize fabric color information. The correlation coefficient and the error of BP neural network color matching model are used for quantitative analysis. The results show that for cotton and polyester fabrics, the correlation coefficients of multi-data source fusion features are greater than 0.9, which is higher than that of single data source, and the characterization ability is stronger. At the same time, this method can significantly reduce the model error and improve the precision. The average error is less than 0.03, and the accuracy of the model is improved by more than 9% compared with the input of a single data source, which proves the effectiveness and universality of the proposed method. © 2024 IEEE.

关键词： Color matching

来源：评论

学校读者我要写书评

暂无评论

Building Li-S batteries with enhanced temperature adaptability via a redox-active COF-based barrier-trapping electrocatalyst

引用

Journal of Energy Chemistry 2025年第2期101卷 702-712,I0015页

作者： Jie Xu Acheng Zhu Zhangyu Zheng Yiming Qi Yuwen Cheng Yongjie Cao Bo Peng Lianbo Ma Yonggang Wang School of Materials Science and Engineering Key Laboratory of Efficient Conversion and Solid-state Storage of Hydrogen&Electricity of Anhui ProvinceKey Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials of Ministry of EducationAnhui University of TechnologyMa'anshan 243002AnhuiChina Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Institute of New EnergyiChEM(Collaborative Innovation Center of Chemistry for Energy Materials)Fudan UniversityShanghai 200433China

Covalent organic frameworks(COFs)are promising materials for mitigating polysulfide shuttling in lithium-sulfur(Li-S)batteries,but enhancing their ability to convert polysulfides across a wide temperature range remains a challenge,Herein,we introduce a redox-active COF(RaCOF)that functions as both a physical barrier and a kinetic enhancer to improve the temperature adaptability of Li-S batteries,The RaCOF constructed from redox-active anthraquinone units accelerates polysulfide conversion kinetics through reversible C=O/C-OLi transformations within a voltage range of 1,7 to 2.8 V(***^(+)/Li),optimizing sulfur redox reactions in ether-based *** conventional COFs,RaCOF provides bidentate trapping of polysulfides,increasing binding energy and facilitating more effective polysulfide ***-situ XRD and ToF-SIMS analyses confirm that RaCOF enhances polysulfide adsorption and promotes the transformation of lithium sulfide(Li_(2)S),leading to better sulfur cathode ***,RaCOF-modified Li-S batteries demonstrate low self-discharge(4.0%decay over a 7-day rest),excellent wide-temperature performance(stable from-10 to+60℃),and high-rate cycling stability(94%capacity retention over 500 cycles at 5.0 C).This work offers valuable insights for designing COF structures aimed at achieving temperature-adaptive performance in rechargeable batteries.

关键词： Lithium-sulfur batteries Redox-active property Covalentorganic framework Wide-temperature adaptability

来源：评论

学校读者我要写书评

暂无评论

Recent advances in protective technologies against copper corrosion

引用

Journal of materials Science & technology 2024年第34期201卷 75-94页

作者： Xiaomeng She Jian Peng Yujie Qiang Yue Zhou Song Zhang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology122 Luoshi RoadWuhan 430070China National Center for Materials Service Safety University of Science and Technology BeijingBeijing 100083China School of Chemistry Chemical Engineering and Life ScienceWuhan University of TechnologyWuhan 430070China

Copper,one of the most frequently utilized non-ferrous metals,finds extensive applications in the elec-trical industry,mechanical engineering,construction industry,and arm ***-term exposure to corrosive environments including moisture,sulfur,chlorine,and microbes induces corrosion,a signifi-cant factor contributing to material ***,numerous scientific endeavors have been directed towards the prevention of copper ***,coating copper with innovative materials like graphene,boron nitride,and various conductive polymers has proven effective in thwarting ***,the introduction of new organic compounds,including azole derivatives,amino acids,and N-heterocyclic carbenes,has bolstered the eco-friendliness and efficiency of corrosion inhibitors and molecular passivation ***,these approaches have been extensively investigated for their efficacy in antioxidation of copper *** study provides a comprehensive review of the latest advancements in protective technologies,such as anti-corrosion coatings,corrosion inhibitors,and molecular passivation layers,aimed at countering copper corrosion under aggressive conditions.

关键词： Copper corrosion Coating Corrosion inhibitor Molecular passivation

来源：评论

学校读者我要写书评

暂无评论

ZnIn_(2)S_(4)/MOF S-scheme photocatalyst for H_(2)production and its femtosecond transient absorption mechanism

引用

Journal of materials Science & technology 2024年第30期197卷 183-193页

作者： Jiajie Cai Bowen Liu Shumin Zhang Linxi Wang Zhen Wu Jianjun Zhang Bei Cheng State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hunan Key Laboratory of Applied Environmental Photocatalysis Changsha UniversityChangsha 410022China Laboratory of Solar Fuel Faculty of Materials Science and ChemistryChina University of Geosciences68 Jincheng StreetWuhan 430078China Department of Chemical Engineering Ordos Institute of TechnologyOrdos 017000China

Photocatalytic water splitting is a popular pathway for H_(2)evolution,but the slow water oxidation greatly hampers the overall *** harness photogenerated holes in an efficient and lucrative way,the wa-ter oxidation reaction is replaced by selective oxidation of organic compounds to achieve simultaneous production of H_(2)and value-added ***,an alternative tactic is reported where an organic compound(benzylamine,BA)not only serves as the precursor for N-benzylidene-benzylamine(NBBA)production but also provides hydrogen sources for H_(2)evolution,achieving the goal under anhydrous *** process is realized using an S-scheme photocatalyst composed of ZnIn_(2)S_(4)and the UiO-66-NH_(2)(U6N)metal-organic framework(MOF).The S-scheme carrier transfer mechanism was validated by in-situ irradiated X-ray photoelectron spectroscopy(ISI-XPS)and femtosecond transient absorption(fs-TA)*** increased carrier efficiency and reinforced redox power endowed by the S-scheme heterojunction,the composite performed better than ZnIn2 S4 and *** performance was further ameliorated by Pt-cocatalyst modification,achieving an H_(2)production rate of 5275μmol h^(-1)g^(-1)as well as BA conversion of 94.3%with 99.3%NBBA *** studies reveal that BA is ini-tially oxidized to carbon-centered radicals and further to imines along with the release of *** imine reacts with another BA molecule to form NBBA,while the protons are reduced to H_(2).This work provides new insights into concurrent photocatalytic H_(2)production and selective organic oxidation from organic amines using S-scheme photocatalysts.

关键词： Photocatalysis S-scheme heterojunction Hydrogen production Selective oxidation Benzylamine Femtosecond transient absorption

来源：评论

学校读者我要写书评

暂无评论

Removal of methylene blue from dye wastewater by cattail leaf-based porous carbon materials

引用

Environmental technology Reviews 2024年第1期13卷 663-679页

作者： Li, Weiwei Chen, Shuhui Tian, Mengmeng Ke, Guizhen State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile University Wuhan China

In this work, cattail leaf-based porous carbon materials (KCL-800-2 and PCL-500-2) with high specific surface were prepared from cattail leaf powder. The structure and morphology of cattail leaf-based porous carbon materials were characterized using SEM and BET. The results showed that the cattail leaf-based porous carbon materials have well-developed pore structure. The highest adsorption capacity of KCL (199.995 mg·g−1) was obtained with an alkaline-carbon ratio of 4:1, an activation temperature of 800°C and an activation time of 2 h. The highest adsorption capacity of PCL (92.0675 mg·g−1) was obtained with a phosphoric acid-carbon ratio of 2:1, an activation temperature of 500°C and an activation time of 2 h. The conditions for the adsorption of methylene blue on the KCL-800-2 and PCL-500-2 were investigated by a one-factor test. The optimization of the adsorption of methylene blue by KCL-800-2 and PCL-500-2 was carried out by a one-way test, and the results showed that the optimal adsorption conditions were temperature 298.15 K, PH 7, adsorption time 12 h, adsorbent dosage of 15, 20 mg, and the initial concentration of MB solution of 100 mg·L−1, 50 mg·L−1, and the adsorption capacity of the adsorbent under the conditions reached 127.3337 mg·g−1, 44.9886 mg·g−1 and 44.9886 mg·g−1, respectively. 44.9886 mg·g−1, respectively. The adsorption data of KCL-800-2 and PCL-500-2 on methylene blue (MB) fitted well with the Langmuir isothermal model and pseudo-second-order model. The adsorption process was a spontaneous, heat-absorbing entropy, monomolecular layer adsorption process. © 2024 Informa UK Limited, trading as Taylor & Francis Group.

关键词： Chemical activation

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：