检索结果-内蒙古大学图书馆

Heavy Metal Migration Characteristics of Co-Combustion between Sewage Sludge and High Alkaline Coal on Circulating Fluidized Bed

引用

Journal of Thermal Science 2022年第6期31卷 2178-2188页

作者： LI Yaode YANG Dong ZHOU Xihong DONG Le SUO Lihui SUN Wenbo State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi'an Jiaotong UniversityXi'an 710049China College of Energy&Power Engineering Northeast Electric Power UniversityJilin 132000China

The migration characteristics of heavy metals in co-combustion of sewage sludge and high alkali coal in circulating fluidized bed were studied by experiments and simulations. Temperature plays a crucial role in thermodynamic equilibrium distribution and migration characteristics of heavy metals. At the temperature range of 700℃-1200℃, Hg is completely gaseous and the proportion of Pb, Ni, and Cd in the gas phase is also high. As is mainly elemental in the system, and the proportion of Cr in the solid phase is large. Zn compounds are diverse and mostly solid materials. The volatility of Cu is not strong, and it will become gaseous when the temperature exceeds 1700℃. The proportion of heavy metals in the gas phase decreases as the excess air ratio increases. In an oxygen-rich atmosphere, most of Zn and Ni are converted to oxides;Pb and Cd are converted to crystalline silicate;Cu is converted to partial aluminate;Cr compound is decomposed to form Cr_(2)O_(3);they are good for the solidification and controlling of heavy metals. The elemental Hg is converted to HgCl_(2) and the elemental As is converted to AsCl_(3). Temperature also has a great influence on the volatilization rate of heavy metals. The higher the temperature, the shorter the time they reach the maximum volatility.

关键词： co-combustion heavy metal migration circulating fluidized bed sewage sludge high alkali coal

来源：评论

学校读者我要写书评

暂无评论

EFFECT OF BLENDING STRAW POWDER INTO COAL GANGUE ON LOADING-UP CHARACTERISTICS OF THE CIRCULATING FLUIDIZED BED GENERATOR UNIT

EFFECT OF BLENDING STRAW POWDER INTO COAL GANGUE ON LOADING-...

引用

ASME 2024 power Conference, power 2024

作者： Zhao, Chenyu Wang, Chaoyang Liu, Ming Liu, Jiping Yan, Junjie MOE Key Laboratory of Thermal Fluid Science Engineering Xi'an Jiaotong University Xi'an China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

ISBN: (纸本)9780791888186

To increase the contribution to the regional environment, the feasibility of blending agricultural residues was explored by a circulating fluidized bed (CFB) generator unit using coal gangue as the single fuel. In this study, straw powder was chosen to blend into the coal gangue, and the whole thermal system was built as a dynamic model based on self-programming and GSE software. Blending affects the load-increasing process from 75 % to 100 % rated power (Pe) with a load variation rate of 1 % Pe/min. With the blended fuel, the deviation of the output power was almost unchanged, and the maximum deviation of the live steam pressure was reduced by 0.04 MPa. With the blending ratios of 10 % and 20 %, the energy efficiencies of the whole unit were improved by 0.48% and 0.81%, respectively, the accumulative deviations of live steam temperature were reduced by 10.4% and 16.5%, respectively, the accumulative deviations of reheat steam temperature were reduced by 13.3% and 18.2% respectively, and the maximum deviations of bed temperature were increased to 8.9 ℃ and 9.5 ℃ respectively. The increased fluctuations in bed temperature are still far from the safe boundary, so the CFB generator unit can safely load up with the blending ratios of 10 % and 20 %. Copyright © 2024 by ASME.

关键词： Coal

来源：评论

学校读者我要写书评

暂无评论

TiO_(2) nanorods based self-supported electrode of 1T/2H MoS_(2) nanosheets decorated by Ag nano-particles for efficient hydrogen evolution reaction

引用

Chinese Chemical Letters 2023年第11期34卷 355-359页

作者： Changzheng Lin Yunpeng Liu Yaxing Sun Zhenyu Wang Hao Xu Mingtao Li Jiangtao Feng Bo Hou Wei Yan Department of Environmental Science&Engineering Xi’an Jiaotong UniversityXi’an 710049China School of Physics and Astronomy Cardiff UniversityThe ParadeCardiffCF243AAWalesUnited Kingdom State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China International Research Center for Renewable Energy(IRCRE) State Key Laboratory of Multiphase Flow in Power Engineering(MFPE)Xi’an Jiaotong UniversityXi’an 710049China

Molybdenum disulfide(MoS_(2))has shown significant promise as an economic hydrogen evolution reaction(HER)catalyst for hydrogen generation,but its catalytic performance is still lower than noble metalbased ***,a silver nanoparticles(Ag NPs)-decorated 1T/2H phase layered MoS_(2) electrocatalyst grown on titanium dioxide nanorod arrays(Ag NPs/1T(2H)MoS_(2)/TNRs)was prepared through acid-tunable ammonium ion *** advantage of MoS_(2) layered structure and crystal phase controllability,as-prepared Ag NPs/1T(2H)MoS_(2)/TNRs exhibited ultrahigh HER ***-proposed strategy combines facile hydrogen desorption(Ag NPs)with efficient hydrogen adsorption(1T/2H MoS_(2))effectively circumventes the kinetic limitation of hydrogen desorption by 1T/2H MoS_(2).The as-prepared Ag NPs/1T(2H)MoS_(2)/TNRs electrocatalyst exhibited excellent HER activity in 0.5 mol/L H2SO4 with low overpotential(118 mV *** hydrogen electrode(RHE))and small Tafel slope(38.61 mV/dec).The overpotential exhibts no obvious attenuation after 10 h of constant current ***-principles calculation demonstrates that as-prepared 1T/2H MoS_(2) exhibit a large capacity to store *** protons can be subsequently transferred to Ag NPs,which significantly increases the hydrogen coverage on the surface of Ag NPs in HER process and thus change the rate-determining step of HER on Ag NPs from water dissociation to hydrogen *** study provides a unique strategy to improve the catalytic activity and stability for MoS_(2)-based electrocatalyst.

关键词： Molybdenum disulfide Silver nanoparticles Hydrogen evolution reaction Density functional theory Hydrogen spillover

来源：评论

学校读者我要写书评

暂无评论

Vapor-liquid equilibrium of H2/CO2and H2/N2/CO2mixture, the liquefaction technology related to the supercritical water gasification products 8

Vapor-liquid equilibrium of H2/CO2and H2/N2/CO2mixture, the ...

引用

8th International Conference on Smart and Sustainable Technologies, SpliTech 2023

作者： Wu, Hongtu Jin, Hui Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Shaanxi Xi'an710049 China

ISBN: (纸本)9789532901283

In this paper, the dew point and liquid phase composition of H2/CO2 and H2/CO2/N2 mixtures at phase equilibrium calculated by PR-BM equation and Van Der Waal mixing rule with commercial MATLAB software are introduced, it is of theoretical significance for the wide application of the products of supercritical water gasification. First, the results obtained by the self-programming code are verified with the experimental data, the experimental data and simulation results of two kinds of CO2/H2 mixtures and two kinds of CO2/N2/H2 mixtures were compared. The average percentage deviation was 2.69%, 4.05%, 2.22%, 1.20%, respectively. Thus the absolute deviations of the mixtures are within the acceptable range, therefore, the model proposed in this paper can well predict the dew point of the mixtures composed of H2/CO2 or H2/CO2/***, the dew point and the CO2 content in the liquid phase of common H2/CO2 and H2/CO2/N2 vapor mixtures in supercritical water gasification products were predicted, and a series of analysis and discussion were conducted on the predicted results finally. © 2023 University of Split, FESB.

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

Photochemical Systems for Solar‑to‑Fuel Production

引用

Electrochemical Energy Reviews 2022年第3期5卷 137-177页

作者： Ya Liu Feng Wang Zihao Jiao Shengjie Bai Haoran Qiu Liejin Guo International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049ShaanxiChina

The photochemical system,which utilizes only solar energy and H_(2)O/CO_(2) to produce hydrogen/carbon-based fuels,is considered a promising approach to reduce CO_(2) emissions and achieve the goal of carbon *** date,numerous photochemical systems have been developed to obtain a viable solar-to-fuel production system with sufficient energy ***,more effort is still needed to meet the requirements of industrial *** this review,we systematically discuss a typical photochemical system for solar-to-fuel production,from classical theories and fundamental mechanisms to raw material selection,reaction condition optimization,and unit device/system advancement,from the viewpoint of ordered energy ***-of-the-art photochemical systems,including photocatalytic,photovoltaic-electrochemical,photoelectrochemical,solar thermochemical,and other emerging systems,are *** highlight the existing bottlenecks and discuss the developing trend of this ***,optimization strategies and new opportunities are proposed to enhance photochemical systems with higher energy efficiency.

关键词： Solar energy Photochemical Hydrogen Carbon-based fuels

来源：评论

学校读者我要写书评

暂无评论

Photocatalytic water splitting on BiVO_(4):Balanced charge-carrier consumption and selective redox reaction

引用

Nano Research 2023年第4期16卷 4568-4573页

作者： Xiangjiu Guan Li Tian Yazhou Zhang Jinwen Shi Shaohua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China Suzhou Academy of Xi’an Jiaotong University Suzhou 215123China State Key Laboratory for Physical Chemistry of Solid Surfaces College of Chemistry and Chemical EngineeringXiamen UniversityXiamen 361005China

Surficial redox reactions play an essential role in photocatalytic water splitting,and are closely related to the surface properties of a specific *** this work,using monoclinic BiVO_(4)decahedral single crystals as a model photocatalyst,we report on the interrelationship between the photocatalytic activity and the surficial reaction sites for charge-carrier *** controlled hydrothermal synthesis,the ratio of{010}to{110}facets on BiVO_(4),which respectively serve as reductive and oxidative sites,is carefully *** results show that superior photocatalytic water oxidation could be obtained on BiVO_(4)decahedrons with a medium ratio of reductive/oxidative sites and that efficient overall water splitting could be achieved via further modification of appropriate cocatalysts in Z-scheme *** excellent photocatalytic performance is attributed to the accelerated selective redox reactions by realizing balanced charge-carrier consumption,which provides insightful guidance for prospering photocatalytic reactions in energy conversion.

关键词： BiVO_(4) photocatalytic water splitting reactive site

来源：评论

学校读者我要写书评

暂无评论

Resource utilization of solid waste carbide slag:a brief review of application technologies in various scenes

引用

Waste Disposal and Sustainable Energy 2022年第1期4卷 1-16页

作者： Hongxia Wang Wanyi Xu Maimoona Sharif Guangxu Cheng Zaoxiao Zhang State Key Laboratory of Multiphase Flow in Power Engineering School of Chemical Engineering and TechnologyXi’an Jiaotong UniversityXi’an 710049ShaanxiChina

China is the largest producer and consumer of calcium carbide in the *** calcium carbide industry is an indispensable industry to support the basic life of *** huge production capacity of calcium carbide is accompanied by a large number of solid waste carbide *** to the immature treatment technology of carbide slag,a large number of carbide slag are stacked on-site,resulting in land occupation,air-drying,easy take-off ash,and pollution of the environment and water *** China,calcium carbide is mainly used to produce acetylene and further utilized,80%of which is used to produce polyvinyl chloride(PVC).A large amount of carbide slag is not used,while only a small part is used in the traditional building materials industry,flue gas desulfurization,sewage treatment,etc.,however,the economic benefits are ***,converting the solid waste carbide slag produced by the calcium carbide industry into high value-added CaCO3,CaCl2,CaSO4 whiskers,*** become a potential way to expand the development field of the calcium carbide industry and is environmentally *** paper focuses on summarizing the traditional and emerging high value-added utiliza-tion technologies of carbide slag,and then introduces the application research of carbide slag in carbon emission ***,the defects of these technologies are summarized and further research directions are *** study provides basic guidance for the diversified development of efficient resource utilization of carbide *** abstract Diversified development of calcium carbide industry,resource utilization of solid waste carbide slag and its application of carbon emission reduction have been fully reviewed.

关键词： Calcium carbide Carbide slag Application research High added value Carbon emission reduction

来源：评论

学校读者我要写书评

暂无评论

Performance comparison investigation on different pulse tube position heat pumps with power recovery displacer

引用

International Journal of Refrigeration 2025年 176卷 1-16页

作者： Zhu, Shenglin Chen, Xi Zhu, Yifan Qi, Yingxia School of Energy and Power Engineering University of Shanghai for Science and Technology 516 Jungong Road Shanghai200093 China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology 516 Jungong Road Shanghai200093 China

Spacecraft waste heat is dissipated into space primarily by radiation. To improve the heat dissipation efficiency of spacecraft radiators in high-temperature environments and reduce heat wastage in spaceflight thermal control systems, thermoacoustic heat pumps (TAHP) are considered a viable method for increasing radiator cooling temperatures and recovering waste heat. In this study, one-dimensional simulations are used to optimize the geometrical parameters of the 100-watt work recovery thermoacoustic heat pump (WRTAHP) for various pulse tube positions. The performances of the two systems are compared at a cold-end temperature of 293 K and a hot-end temperature of 353 K. The results reveal that a heating capacity of 256 W with a relative Carnot efficiency of 35.01 % is achieved for the pulse tube front-type thermoacoustic heat pump (FTTAHP), whereas the pulse tube back-type thermoacoustic heat pump (BTTAHP) obtains a heating capacity of 225 W with a relative Carnot efficiency of 30.59 %. As the cold-end temperature decreases, the coefficient of performance is reduced for FTTAHP, while the performance of BTTAHP shows a substantial improvement. At a cold end temperature of 233 K and a hot-cold end temperature difference of 60 K, a heating capacity of 268 W with a relative Carnot efficiency of 50.57 % is achieved for BTTAHP. Furthermore, the heating capacity of the BTTAHP is not significantly increased by adopting the active phase adjustment structure. In summary, the FTTAHP is suitable for spacecraft radiator applications and avoids high temperatures affecting compressor operation, whereas the BTTAHP is better suited for low-temperature heating. © 2025 Elsevier Ltd and IIR

关键词： Waste heat utilization

来源：评论

学校读者我要写书评

暂无评论

N and O vacancies regulation over semiconductor heterojunction to synergistically boost photocatalytic hydrogen peroxide production

引用

Journal of Materials Science & Technology 2024年第29期196卷 237-247页

作者： Chaoqian Ai Bing Luo Chunyang Zhang Yadi Wang Baoyuan Wang Lijing Ma Dengwei Jing International Research Center for Renewable Energy&State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China School of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’an 710049China Department of Chemical Engineering School of Water and Environment&Key Laboratory of Subsurface Hydrology and Ecology in Arid AreasMinistry of Education Chang’an UniversityXi’an 710054China

Defect engineering represents a potent strategy for the modification of electronic properties by introducing atomic vacancies in ***,the synergistic enhancement attributable to different types of atomic vacancies within a heterojunction,as well as their underlying mechanisms,remains sparsely ***,the flexible g-C_(3)N_(4)materials with varying nitrogen vacancies were prepared via a facile calcination method under different atmospheric conditions and then composited with CeO_(2)nanocubes to construct Z-scheme *** was observed that CeO_(2)has abundant O vacancies,and the g-C_(3)N_(4)form tertiary nitrogen defects at the center of the heptazine units under an NH3 atmosphere *** resulting enhancement in the interfacial built-in electric field,coupled with the synergistic effect of O and N vacancies within the Z-scheme heterojunction,has been demonstrated to significantly enhance charge transfer *** results in an optimized photoactivity with a H_(2)O_(2)generation rate of 2.01 mmol g^(-1)h^(-1).This work opens an avenue for constructing and optimizing the heterogeneous photocatalysts by defect engineering technology,and provides deep insight to understand the nature of vacancy engineering in designing effective catalysts for solar energy conversion.

关键词： Photocatalysis H_(2)O_(2) production Z-scheme Defect engineering Synergy effect

来源：评论

学校读者我要写书评

暂无评论

Heat and power Load Prediction for Combined Heat and power Station with Different Methods 4

Heat and Power Load Prediction for Combined Heat and Power S...

引用

4th IEEE International Conference on Digital Twins and Parallel Intelligence, DTPI 2024

作者： Wang, Lin Yu, Tingting Chen, Chen Gao, Yaokui Gao, Lin Qiu, Binbin Liu, Ming Xi'an Thermal Power Research Institute Co. Ltd Xi'an China Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering Xi'an China

ISBN: (纸本)9798350349252

The accurate short-term load prediction is an essential prerequisite for ensuring the reliable and economic operation of combined heat and power stations. In this study, the heat load and power load prediction models of combined heat and power station were developed with long short-term memory (LSTM) and multiple linear regression (MLR), respectively. The preprocessing and correlation analysis of heat and power loads were conducted. The prediction effects of different prediction models were also compared and analyzed. Taking the data of February as an example, the mean absolute percentage error (MAPE) of heat load prediction with LSTM and MLR models are 3.20% and 3.75%, respectively, and the MAPE of power load prediction are 5.59% and 8.76%, respectively. The prediction results show that the performance of the LSTM model is better than that of the MLR model, and the prediction accuracy of the heat load is higher than that of the power load. © 2024 IEEE.

关键词： Prediction models

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：