检索结果-内蒙古大学图书馆

Two-stage Optimal Scheduling of Community Integrated Energy system Considering operation Sequences of Hydrogen Energy Storage systems

引用

Journal of Modern power systems and Clean Energy 2025年第1期13卷 276-288页

作者： Wei Kong Kai Sun Jinghong Zhao School of Electrical Engineering Naval University of EngineeringWuhanChina Department of Electrical Engineering State Key Laboratory of Power System Operation and ControlTsinghua UniversityBeijingChina

The hydrogen energy storage system(HESS)integrated with renewable energy power generation exhibits low reliability and flexibility under source-load *** address the above issues,a two-stage optimal scheduling model considering the operation sequences of HESSs is proposed for commercial community integrated energy systems(CIESs)with power to hydrogen and heat(P2HH)*** aims to optimize the energy flow of HESS and improve the flexibility of hydrogen production and the reliability of energy supply for ***,the refined operation model of HESS is established,and its operation model is linearized according to the operation domain of HESS,which simplifies the difficulty in solving the optimization problem under the premise of maintaining high approximate ***,considering the flexible start-stop of alkaline electrolyzer(AEL)and the avoidance of multiple energy conversions,the operation sequences of HESS are ***,a two-stage optimal scheduling model combining day-ahead economic optimization and intra-day rolling optimization is established,and the model is simulated and verified using the source-load prediction data of typical days in each *** simulation results show that the two-stage optimal scheduling reduces the total load offset by about 14%while maintaining similar operating cost to the day-ahead economic optimal ***,by formulating the operation sequences of HESS,the operating cost of CIES is reduced by up to about 4.4%.

关键词： Community integrated energy system(CIES) hydrogen storage operation sequence two-stage optimal scheduling

来源：评论

学校读者我要写书评

暂无评论

Effects of Corona Discharge from the Grounding Tip on Charge Evolution of Wall Bushing

引用

IEEE Transactions on power Delivery 2025年第3期40卷 1682-1693页

作者： Bai, Zheng Zhou, Yuanxiang Zhang, Yunxiao Huang, Xin Xie, Xiongjie Liu, Taiwei Tsinghua University State Key Laboratory of Power System Operation and Control Department of Electrical Engineering Beijing100084 China Electric Power Research Institute State Key Laboratory of Power Grid Environmental Protection Wuhan430204 China

Manufacturers consider that the grounding tip near the wall bushing flange is a potentially important factor in several sheath perforation accidents. Taking a ±100 kV true type SF6 gas-insulated bushing as a typical wall bushing, this paper tests the impact of the nearby grounding tip on the charge accumulation. Based on the experiment results, we propose the three-dimensional nonlinear conduction model to unravel the charge accumulation process and the three-dimensional corona ion migration model to clarify the corona process. It is concluded that the consumption of gas ions leads to the nonlinear charge relaxation process. When the corona of grounding tip incepts, numerous ions are generated, forming an "overcharge" phenomenon. The electric field at the insulator-sheds interface and the SF6-insulator interface increases compared to the normal condition, with non-uniform distribution along the circumferential direction. Material inhomogeneity amplifies electric field distortion and creates insulation weaknesses, making insulation aging more likely and potentially leading to a slowly developing electrical tree breakdown process. The length of the needle tip affects the duration of the corona effect;an excessively long needle tip can cause a sustained corona discharge. This research provides a foundation for bushing accidents analysis and operation reliability improvement. © 1986-2012 IEEE.

关键词： Bushings

来源：评论

学校读者我要写书评

暂无评论

Monitoring Conductor Sags for Dynamic Line Rating Based on Induced Signals in Overhead Ground Wires

引用

IEEE Transactions on power Delivery 2025年第3期40卷 1289-1297页

作者： Cui, Zherui Zhang, Bo Wang, Xiankang Yao, Yao Zhou, Xueming Tsinghua University Department of Electrical Engineering State Key Laboratory of Power System Operation and Control Beijing100084 China State Grid Hubei Electric Power Research Institue Wuhan430000 China

The sag information of conductors is important for dynamic line rating. This paper proposes a novel monitoring method for conductor sags based on the current or voltage in ground wires, which is produced by mutual inductance between conductors and ground wires. The devices of this method are easy to install and maintain, and the monitoring effect is not affected by bad weather such as snow and fog. To obtain sag information, a calculation method of induced signals in the ground wires is firstly proposed. Then the sensitivity of the induced signals in the ground wires to the variation of conductor sags is evaluated. The relationship between the induced signals in the ground wires and the sag information is established through neural network. A scaled test model of overhead transmission line is established to verify the proposed method. The accuracy of deduced results is acceptable. © 1986-2012 IEEE.

关键词： Wire

来源：评论

学校读者我要写书评

暂无评论

Data-Driven Dimension Reduction for Industrial Load Modeling Using Inverse Optimization

引用

IEEE Transactions on Smart Grid 2025年第3期16卷 2695-2698页

作者： Lyu, Ruike Guo, Hongye Strbac, Goran Kang, Chongqing Tsinghua University State Key Laboratory of Power System Operation and Control Department of Electrical Engineering Beijing100084 China Imperial College London Department of Electrical and Electronic Engineering LondonSW7 2AZ United Kingdom

The intricate mixed-integer constraints in industrial load models not only pose challenges for their direct integration into economic dispatch or market clearing processes but also render current analytical dimension-reduction methods ineffective. We propose a novel data-driven dimension-reduction approach for industrial load modeling, which uses the optimal energy usage data from industrial loads to train a dimension-reduced model that best fits the original constraints. Our approach, implemented by the adjustable load fleet model, outperformed analytical methods across three industrial load datasets. © 2010-2012 IEEE.

关键词： Load modeling Energy consumption Training Dimensionality reduction Biological system modeling Optimization Computational modeling Electricity Steel Cement industry

来源：评论

学校读者我要写书评

暂无评论

Flexible region aggregation of adjustable loads via an adaptive convex hull strategy

引用

Global Energy Interconnection 2025年第1期8卷 106-120页

作者： Yisha Lin Zongxiang Lu Ying Qiao Ruijie Chen State Key Lab of Power Systems Operation and Control (Department of Electrical Engineering Tsinghua University)BeijingPR China State Grid Quanzhou Electric Power Supply Company QuanzhouPR China

Increasing interest has been directed toward the potential of heterogeneous flexible loads to mitigate the challenges associated with the increasing variability and uncertainty of renewable *** the aggregated flexible region of load clusters managed by load aggregators is the crucial basis of power system scheduling for the system *** is because the aggregation result affects the qual-ity of the scheduling schemes.A stringent computation based on the Minkowski sum is NP-hard,whereas existing approximation meth-ods that use a special type of polytope exhibit limited adaptability when aggregating heterogeneous *** study proposes a stringent internal approximation method based on the convex hull of multiple layers of maximum volume boxes and embeds it into a day-ahead scheduling optimization *** numerical results indicate that the aggregation accuracy can be improved compared with methods based on one type of special polytope,including boxes,zonotopes,and ***,the reliability and economy of the power sys-tem scheduling can be enhanced.

关键词： Aggregation Flexible region Heterogeneous load power system scheduling

来源：评论

学校读者我要写书评

暂无评论

Effect of Photoionization Mechanism on Numerical Simulation of Transformer Oil Streamer Discharge 19th

Effect of Photoionization Mechanism on Numerical Simulation ...

引用

19th Annual Conference of China Electrotechnical Society, ACCES 2024

作者： Liang, Shaobin Zhou, Yuanxiang Chen, Jianning He, Zhiyang Li, Yuhang School of Electrical Engineering Xinjiang University Urumqi China State Key Laboratory of Power System Operation and Control Beijing China Department of Electrical Engineering Tsinghua University Beijing China

ISBN: (纸本)9789819613861

Discharge in transformer oil is one of the primary causes of transformer failures. The physical mechanisms of oil discharges are not yet fully understood. However, the prevailing electrohydrodynamics models primarily adopt field ionization and collision ionization, neglecting photoionization, which could potentially affect the discharge of liquid dielectric streamers. To reveal the discharge characteristics of transformer oil, this paper improves the field ionization term in electrohydrodynamics model, establishes a function of the ionization energy of transformer oil in relation to the recombination strength of carriers, and proposes a simulation model of streamer discharge in oil considering photoionization. The effects of photoionization on the characteristics of streamer discharge in transformer oil are studied, by examining the morphology and propagation velocity of streamers. The results show that the introduction of the photoionization mechanism promotes the formation of streamer branches and makes the energy in the streamer channel more concentrated. Moreover, photoionization facilitates the rapid propagation of streamers, which is key to the formation of the third mode of streamers. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Electrohydrodynamics

来源：评论

学校读者我要写书评

暂无评论

Investigation of the Effect of Bonding Wires Degradation on Switching Stress Waves Released During power Cycling in Discrete IGBT

引用

IEEE Journal of Emerging and Selected Topics in power Electronics 2025年第2期13卷 2057-2069页

作者： Geng, Xuefeng He, Yunze Tang, Longhai Chang, Shan Zhang, Jie Yang, Wenxue Yuan, Man Wang, Guangxin Li, Qiying Ping, Yang Huang, Songling Hunan University College of Electrical and Information Engineering Changsha410082 China Tsinghua University State Key Laboratory of Power System Operation and Control Beijing100084 China Hunan University Shenzhen Research Institute Shenzhen518000 China Tsinghua University Department of Electrical Engineering Beijing100084 China

Effective condition monitoring (CM) technology ensures the safe operation of insulated gate bipolar transistors (IGBTs). Most CM methods for IGBTs focus on extracting electrical, thermal, and magnetic parameters. Recent studies indicate that at the switching moment, IGBTs can emit the switching stress wave (SSW) that is detectable by the acoustic emission (AE) sensors. However, using these SSWs to monitor the health status of IGBTs, even for discrete devices with relatively simple package structures, remains challenging. This article investigates how SSWs from discrete IGBTs during power cycling change as bonding wires degrade and whether these waves are promising for monitoring the condition of internal bonding wires. In this work, a power cycle test platform and an SSW test platform for discrete IGBTs are built, and SSWs from discrete IGBTs during power cycling are analyzed. Results show that SSWs vary with the degradation of the device’s bonding wires, with changes in the time domain indicator of signal energy, reflecting SSW strength, and the frequency domain indicator of the center of gravity (COG) frequency, reflecting frequency shifts. These findings suggest the possibility for developing AE-based detection technology (AEDT) in CM of the IGBT. © 2013 IEEE.

关键词： Insulated gate bipolar transistors (IGBT)

来源：评论

学校读者我要写书评

暂无评论

control, Modeling and Stability Analysis of DRU-based Grid-forming Converter

引用

Chinese Journal of electrical engineering 2025年第1期11卷 83-92页

作者： Wencong Wu Minzhi Wang Liang Tu Haiqing Cai Guanglei Yan Xiaohui Qu Haohan Gu Wei Chen State Key Laboratory of HVDC China Southern Power GridGuangzhou 510663China National Energy Power Grid Technology R&D Center Guangzhou 510663China Guangdong Provincial Key Laboratory of Intelligent Operation and Control for New Energy Power Systems China Southern Power GridGuangzhou 510663China CSG Key Laboratory for Power System Simulation China Southern Power GridGuangzhou 510663China School of Electrical Engineering Southeast UniversityNanjing 210096China

Diode rectifier unit(DRU)-based high-voltage direct current(HVDC)transmissionsystems areeffectivein achieving the stableandeconomical operation of offshore *** theuncontrollable characteristicsof DRUs,a grid-forming(GFM)strategy forwind-turbine converters isnecessary to support offshore AC voltageand ***,the active power-synchronization control in traditional GFM converters is unsuitable for DRU-based GFM ***,the stability issue for DRU-based HVDC systems involving DRU-based GFM and grid-following(GFL)converters has not yet been *** solve these issues,this study begins with the characteristics of a DRU-based HVDC system and presents a control scheme for DRU-based GFM converters for power ***,the dq-frame impedance model of the DRU-based GFM converteris proposed for the stability analysis of the entire HVDC ***,a simulation platform is built to verify the model accuracy and system stability.

关键词： Diode rectifier unit offshore wind-powergeneration grid-forming converter impedance model stabilityanalysis

来源：评论

学校读者我要写书评

暂无评论

Design of Double-Loop Current Transformer Based on Magnetic Field Incomplete Cancellation

引用

CSEE Journal of power and Energy systems 2025年第2期11卷 772-782页

作者： Wenbo Li Xiaojun Tang Youshui Lu Ling Yan Yi Wu Mingzhe Rong Department of Measurement and Control Technology&Instrumentation School of Electrical EngineeringXi'an Jiaotong UniversityXi'an 710000China State Key Laboratory of Electrical Insulation&Power Equipment School of Electrical EngineeringXi'an Jiaotong UniversityXi'an 710000China

Electromagnetic current transformer is one of the important pieces of equipment used in AC power system measurement. Due to continuous improvement of current level to be measured in the power system, ordinary single-loop magnetic core structure cannot meet industrial needs of wide measuring range with high accuracy, while it even has a magnetic saturation problem when measured current is reaching the limit. Most existing methods expand measuring range and increase antisaturation ability of the magnetic core by either opening an air gap in the magnetic core or increasing number of turns of primary and secondary windings, but it will bring additional problems such as volume and heat dissipation of the transformer. To solve such issues, in this paper, we proposed a magnetic core structure of double-loop current transformer based on incomplete magnetic field cancellation principle. Calculation formula of air gap size and theoretical error are analyzed. We provide a theo-retical analysis of working characteristics, amplitude error and phase error throughout a three-dimensional simulation model of transformer. In addition, we evaluate performance through a series of comparison experiments. Results demonstrate our double-loop current transformer can maintain good linear relationship between primary and secondary current while ensuring measurement accuracy at 0.2 level. With the same volume, it has a wider range of rated current measurements and a certain anti-saturation ability.

关键词： Current difference coefficient double-loop core incomplete magneticfield cancellation

来源：评论

学校读者我要写书评

暂无评论

Geometric Methods for Assessing the Value and Demands of Energy Storage in power system operation

引用

Energy Internet 2025年第1期2卷 86-103页

作者： Qi Lv Boshen Zheng Shengwei Mei Wei Wei Department of Electrical Engineering State Key Laboratory of Power System Operation and Control Tsinghua University Beijing China

Driven by the desire of a low-carbon society, the penetration level of renewable generation in the power grid of China will still grow fast in the near future. As the synchronised generators whose output is controllable are gradually replaced by volatile energy resources, energy storage is expected to play a vital role in regulation services and flexibility provision. Because the capital cost of energy storage is still relatively high, it is important to assess the value or demand of energy storage before making an investment decision. This paper presents two representative mathematical tools to achieve this target in a geometric fashion. The first one is the multi-parametric programming method. It depicts the reduced cost by deploying energy storage through post-optimal value function, which is easy to visualise or can be embedded in high-level optimisation problems such as storage sizing. The second one is a polyhedral projection method. It represents all feasible power-energy capacity pairs of a storage unit to achieve a certain target. The above methods remove the need of repeatedly solving a large number of problems with varying capacity parameters. Simple examples are given for illustration, and the presented methods can also directly handle problems with complex models and constraints.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：