检索结果-内蒙古大学图书馆

Development of a Miniature Underactuated Tripod Robot Inspired by Penguin Waddling Gait

IEEE Transactions on Industrial Electronics 2025年

作者： Liu, Youwei Zhang, Shijing Deng, Jie Li, Jing Liu, Junkao Liu, Yingxiang Harbin Institute of Technology State Key Laboratory of Robotics and System Harbin150001 China

Mobile robots utilizing vibration direct drive by eccentric motors have the advantages of compact structure, easy control, and low driving voltage, which facilitate miniaturization, lightweight design, and integration. Inspired by the waddling gait of penguins, this work proposes a vibration direct drive miniature tripod robot powered by a single eccentric motor. This robot demonstrates excellent load capacity and low transport costs. Notably, the waddling motion of the robot is achieved by alternately exciting the eccentric motor with positive and negative pulse-width modulation (PWM) signals. An unbalanced force is generated by using the integrated onboard power supply and control system as the eccentric mass of the robot. The structure design and electrical design are conducted, the working principle is analyzed, and a robot prototype is fabricated. The prototype weighs 12 g and has dimensions of 33 mm × 29 mm × 23 mm. Experimental results demonstrate that it can bear a maximum load of 143 g, which is 11.92 times its self-weight, and achieve a minimum cost of transport of 27.98. This work presents a new approach to research vibration direct drive underactuated miniature robots actuated by a single eccentric motor. © 1982-2012 IEEE.

关键词： Mobile robots

来源：评论

学校读者我要写书评

暂无评论

Synthesized colonoscopy dataset from high-fidelity virtual colon with abnormal simulation

引用

Computers in Biology and Medicine 2025年 186卷 109672-109672页

作者： He, Dongdong Liu, Ziteng Yin, Xunhai Liu, Hao Gao, Wenpeng Fu, Yili School of Life Science and Technology Harbin Institute of Technology Harbin150080 China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150080 China State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang110016 China Department of Gastroenterology The First Affiliated Hospital of Harbin Medical University Harbin150001 China

With the advent of the deep learning-based colonoscopy system, the need for a vast amount of high-quality colonoscopy image datasets for training is crucial. However, the generalization ability of deep learning models is challenged by the limited availability of colonoscopy images due to regulatory restrictions and privacy concerns. In this paper, we propose a method for rendering high-fidelity 3D colon models and synthesizing diversified colonoscopy images with abnormalities such as polyps, bleeding, and ulcers, which can be used to train deep learning models. The geometric model of the colon is derived from CT images. We employed dedicated surface mesh deformation to mimic the shapes of polyps and ulcers and applied texture mapping techniques to generate realistic, lifelike appearances. The generated polyp models were then attached to the inner surface of the colon model, while the ulcers were created directly on the inner surface of the colon model. To realistically model blood behavior, we developed a simulation of the blood diffusion process on the colon's inner surface and colored vertices in the traversed region to reflect blood flow. Ultimately, we generated a comprehensive dataset comprising high-fidelity rendered colonoscopy images with the abnormalities. To validate the effectiveness of the synthesized colonoscopy dataset, we trained state-of-the-art deep learning models on it and other publicly available datasets and assessed the performance of these models in abnormal classification, detection, and segmentation. Notably, the models trained on the synthesized dataset exhibit an enhanced performance in the aforementioned tasks, as evident from the results. © 2025 Elsevier Ltd

关键词： Digital elevation model

来源：评论

学校读者我要写书评

暂无评论

Relative Localizability and Localization for Multirobot systems

引用

IEEE Transactions on robotics 2025年 41卷 2931-2949页

作者： Chen, Liangming Liang, Chenyang Yuan, Shenghai Cao, Muqing Xie, Lihua Southern University of Science and Technology School of System Design and Intelligent Manufacturing Guangdong Provincial Key Laboratory of Fully Actuated System Control Theory and Technology Shenzhen518055 China Harbin Institute of Technology School of Mechanical Engineering and Automation Shenzhen518055 China Southern University of Science and Technology School of System Design and Intelligent Manufacturing Shenzhen518055 China Nanyang Technological University School of Electrical and Electronic Engineering 639798 Singapore Carnegie Mellon University Robotics Institute PittsburghPA15213 United States

Inter-robot relative positions are crucial for executing various multirobot missions, such as formation maneuvering and collaborative inspection. However, the current sensing technology usually provides part of relative position information, such as inter-robot distances, bearings and angles. This prompts the study of determining inter-robot relative positions, i.e., relative localization, from these partial measurements. Based on the existing results of static networks' localizability and mobile robots' relative localization, we propose a novel concept, relative localizability to describe whether a multirobot system is relatively localizable. Given each robot's self-displacement measurements and inter-robot partial measurements in d (d ≤ 4) sampling instants, we show that a multirobot system's relative localization can be achieved in a purely algebraic and distributed manner, in which the multirobot system is said to be d-step relatively localizable. To make the results more general, we consider that the multirobot system consists of landmarks, leaders, and followers, and that the inter-robot measurements can be distances, bearings or angles. When robots' coordinate frames have different orientations, we show that the given local measurements can be used to determine robots' relative positions and their coordinate frames' relative orientations simultaneously. Simulations and experiments of relative localization for ground robots are conducted to validate the obtained results. © 2004-2012 IEEE.

关键词： Multipurpose robots

来源：评论

学校读者我要写书评

暂无评论

High-order Fully Actuated system Approach based Attitude Stabilization for Underactuated Rigid and Flexible Spacecraft

引用

IEEE Transactions on Automation Science and Engineering 2025年 22卷 15094-15105页

作者： Jia, Shixiang Qiu, Jianbin Wang, Tong Harbin Institute of Technology State Key Laboratory of Robotics and Systems Harbin 150001 China Harbin Institute of Technology Research Institute of Intelligent Control and Systems Harbin 150080 China

This paper addresses the challenge of attitude stabilization for a class of underactuated rigid and flexible spacecrafts by utilizing only two control inputs. The attitude stabilization problem of underactuated spacecraft poses substantial challenges to the High-Order Fully Actuated (HOFA) system approach, due to the fact that it heavily depends on the full actuation characteristics of the system. To circumvent the aforementioned limitation, we first derive a HOFA system for underactuated rigid spacecraft using homogeneity theory and averaged system approach. Subsequently, we design a controller based on the HOFA system approach, which yields a linear closed-loop system. This methodology is then extended to address the simplified attitude stabilization problem of underactuated flexible spacecraft. By utilizing the HOFA system approach in tandem with an observer for estimating modal variables, we propose a control strategy that not only stabilizes the attitude but also actively suppresses elastic vibration. The performance of the proposed control schemes are demonstrated through simulation studies. © 2004-2012 IEEE.

关键词： Attitude stabilization Flexible spacecraft High-order fully actuated system approach Underactuated spacecraft

来源：评论

学校读者我要写书评

暂无评论

Study on wear mechanism of small ball-end grinding wheel and surface integrity of complex component under high-speed machining condition

引用

Wear 2025年

作者： Qin, Biao Liu, Henan Cheng, Jian Tian, Jinchuan Sun, Jiangang Chen, Mingjun School of Mechatronics Engineering Harbin Institute of Technology Heilongjiang Harbin150001 China State Key Laboratory of Robotics and System Harbin Institute of Technology Heilongjiang Harbin150001 China Zhengzhou Research Institute Harbin Institute of Technology Zhengzhou450000 China

The small ball-end fine diamond grinding wheel is well-suited for machining complex components with small curved surface structures, demonstrating high-precision and high-quality machining capabilities. By increasing the speed of the workpiece, the issue of poor grinding performance caused by the small diameter of the ball-end grinding wheel can be effectively overcome. However, this strategy inevitably increases wheel wear and affects surface integrity. To address these challenges, this paper systematically investigates the grinding characteristics of the small ball-end grinding wheel. First, grinding experiments were performed to investigate the influence of workpiece speed, feed rate, and grinding depth on the material removal rate, wheel wear, and surface integrity. Then, the wear mechanism of the grinding wheel was analyzed. The wear modes of the grinding wheel at high workpiece speeds include metal adhesive wear and abrasive grain fracture, which enhance the self-sharpening of the grinding wheel while accelerating its wear. Furthermore, the surface morphology creation mechanism of fused silica under different material removal modes was revealed. Moreover, the correlation between material removal rate and surface roughness caused by wheel wear was revealed. A high-speed grinding strategy was subsequently proposed based on the relationship between the grinding characteristics and grinding parameters of the small ball-end grinding wheel under various grinding conditions. Finally, the feasibility of this grinding strategy was validated through its application to the machining of the complex curved fused silica hemispherical resonator (HSR). Experimental results indicate that under the high workpiece speed condition, the best surface roughness of HSR decreases from 90.5 nm to 62.2 nm, while the maximum grinding wheel wear increases from 9.7 μm to 11.5 μm, with minimal impact on surface integrity. Therefore, the high-speed grinding strategy proposed in this study ho

关键词： Fused silica

来源：评论

学校读者我要写书评

暂无评论

Centra-Net: A Centralized Network for Visual Localization Spanning Multiple Scenes

引用

IEEE Transactions on Multimedia 2025年

作者： Jiang, Zhiqiang Dai, Kun Wang, Ke Xie, Tao Fan, Zhendong Li, Ruifeng Kang, Peng Zhao, Lijun Harbin Institute of Technology State Key Laboratory of Robotics and System Harbin150006 China Harbin Institute of Technology Zhengzhou Research Institute Zhengzhou450000 China Jianghuai Advance Technology Center Hefei230000 China

We present Centra-Net, a centralized network that concurrently optimizes visual localization over numerous scenes under heterogeneous dataset domains. Centra-Net exemplifies storage efficiency by amalgamating multiple models with task-shared parameters into a singular cohesive structure. Technically, we develop a basic feature extraction unit (BFEU) with two parallel branches: one dedicated to local feature extraction and the other adept at adaptively generating a task-specific attention mask for feature calibration, thus bolstering its feature extraction capability across diverse scenes. Based on the BFEU, we introduce a filter-wise sharing mechanism (FSM) that adaptively determines parameter sharing within the unit, thus facilitating fine-grained parameter allocation. The key insight of FSM resides in reconceptualizing the parameter sharing of the unit as a learnable paradigm, enabling the determination of shared parameters to be made post-training. Finally, we suggest a complexity-prioritized gradient algorithm (CPGA) that capitalizes on task complexity to attain a harmonious learning space for various tasks, thus safeguarding optimal performances across all tasks. Through rigorous experiments on numerous benchmarks, Centra-Net demonstrates a notable edge over existing state-of-the-art works while operating with a significantly reduced parameter footprint. © 1999-2012 IEEE.

关键词： Deep learning Feature extraction Task complexity Visual localization

来源：评论

学校读者我要写书评

暂无评论

Lunar regolith simulant-derived 3D-printed geopolymers with optimized mechanical and thermal management properties

引用

Composites Part A: Applied Science and Manufacturing 2025年 196卷

作者： Sun, Yifan Ma, Siqi Chen, Qingze Chen, Guoliang He, Peigang Wang, Yaming Qiu, Jun Jia, Dechang School of Energy Science and Engineering Key Laboratory of Aerospace Thermophysics Harbin Institute of Technology Harbin150001 China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150001 China Institute for Advanced Ceramics Key Laboratory of Advanced Structure-Function Integrated Materials and Green Manufacturing Technology Harbin Institute of Technology Harbin150080 China Guangdong Provincial Key Laboratory of Mineral Physics and Materials Guangzhou Institute of Geochemistry Chinese Academy of Sciences Guangzhou510460 China

Lunar soil, as an in-situ resource, holds significant potential for constructing bases and habitats on the Moon. However, such constructions face challenges including limited mechanical strength and extreme temperature fluctuations ranging from −170 °C to +133 °C between lunar day and night. In this study, we developed a 3D-printed geopolymer derived from lunar regolith simulant with an optimized zig-zag structure, exhibiting exceptional mechanical performance and thermal stability. The designed structure achieved remarkable damage tolerance, with a compressive strength exceeding 12.6 MPa at ∼ 80 vol% porosity and a fracture strain of 3.8 %. Finite element method (FEM) simulations revealed that the triangular frame and wavy interlayers enhanced both stiffness and toughness. Additionally, by incorporating strategically placed holes and extending the thermal diffusion path, we significantly improved the thermal insulation of the structure, achieving an ultralow thermal conductivity of 0.24 W/(m K). Furthermore, an iron-free geopolymer coating reduced overheating under sunlight by 51.5 °C, underscoring the material's potential for space applications. © 2025 Elsevier Ltd

关键词： Compressive strength

来源：评论

学校读者我要写书评

暂无评论

II-NVM: Enhancing Map Accuracy and Consistency With Normal Vector-Assisted Mapping

引用

IEEE robotics and Automation Letters 2025年第6期10卷 5465-5472页

作者： Zhao, Chengwei Li, Yixuan Jian, Yina Xu, Jie Wang, Linji Ma, Yongxin Jin, Xinglai Xi'an Jiaotong University Institute of Artificial Intelligence and Robotics Xi'an710049 China Hangzhou Qisheng Intelligent Techology Company Ltd Hangzhou311217 China Columbia University in the City of New York Department of Computer Science New YorkNY10027 United States Harbin Institute of Technology State Key Laboratory of Robotics and Systems Harbin150001 China Nanyang Technological University School of Electrical and Electronic Engineering 639798 Singapore School of Electrical and Electronic Engineering Nanyang Technological University 639798 Singapore

SLAM technology plays a crucial role in indoor mapping and localization. A common challenge in indoor environments is the "double-sided mapping issue", where closely positioned walls, doors, and other surfaces are mistakenly identified as a single plane, significantly hindering map accuracy and consistency. To addressing this issue this letter introduces a SLAM approach that ensures accurate mapping using normal vector consistency. We enhance the voxel map structure to store both point cloud data and normal vector information, enabling the system to evaluate consistency during nearest neighbor searches and map updates. This process distinguishes between the front and back sides of surfaces, preventing incorrect point-to-plane constraints. Moreover, we implement an adaptive radius KD-tree search method that dynamically adjusts the search radius based on the local density of the point cloud, thereby enhancing the accuracy of normal vector calculations. To further improve real-time performance and storage efficiency, we incorporate a Least Recently Used (LRU) cache strategy, which facilitates efficient incremental updates of the voxel map. The code is released as open-source and validated in both simulated environments and real indoor scenarios. Experimental results demonstrate that this approach effectively resolves the "double-sided mapping issue" and significantly improves mapping precision. Additionally, we have developed and open-sourced the first simulation and real-world dataset specifically tailored for the "double-sided mapping issue". © 2016 IEEE.

关键词： Mapping

来源：评论

学校读者我要写书评

暂无评论

Text-Derived Relational Graph-Enhanced Network for Skeleton-Based Action Segmentation

arXiv

引用

arXiv 2025年

作者： Ji, Haoyu Chen, Bowen Ren, Weihong Huang, Wenze Yang, Zhihao Wang, Zhiyong Liu, Honghai State Key Laboratory of Robotics and Systems Harbin Institute of Technology Shenzhen Shenzhen518055 China

Skeleton-based Temporal Action Segmentation (STAS) aims to segment and recognize various actions from long, untrimmed sequences of human skeletal movements. Current STAS methods typically employ spatio-temporal modeling to establish dependencies among joints as well as frames, and utilize one-hot encoding with cross-entropy loss for frame-wise classification supervision. However, these methods overlook the intrinsic correlations among joints and actions within skeletal features, leading to a limited understanding of human movements. To address this, we propose a Text-Derived Relational Graph-Enhanced Network (TRG-Net) that leverages prior graphs generated by Large Language Models (LLM) to enhance both modeling and supervision. For modeling, the Dynamic Spatio-Temporal Fusion Modeling (DSFM) method incorporates Text-Derived Joint Graphs (TJG) with channel- and frame-level dynamic adaptation to effectively model spatial relations, while integrating spatio-temporal core features during temporal modeling. For supervision, the Absolute-Relative Inter-Class Supervision (ARIS) method employs contrastive learning between action features and text embeddings to regularize the absolute class distributions, and utilizes Text-Derived Action Graphs (TAG) to capture the relative inter-class relationships among action features. Additionally, we propose a Spatial-Aware Enhancement Processing (SAEP) method, which incorporates random joint occlusion and axial rotation to enhance spatial generalization. Performance evaluations on four public datasets demonstrate that TRG-Net achieves state-of-the-art results. © 2025, CC BY.

关键词： Spatio-temporal data

来源：评论

学校读者我要写书评

暂无评论

Adaptive-LIO: Enhancing Robustness and Precision Through Environmental Adaptation in LiDAR Inertial Odometry

引用

IEEE Internet of Things Journal 2025年第9期12卷 12123-12136页

作者： Zhao, Chengwei Hu, Kun Xu, Jie Zhao, Lijun Han, Baiwen Wu, Kaidi Tian, Maoshan Yuan, Shenghai Harbin Institute of Technology State Key Laboratory of Robotics and Systems Heilongjiang Harbin150001 China Hangzhou Qisheng Intelligent Techology Company Ltd. Zhejiang Hangzhou311217 China China University of Mining and Technology School of Mechatronic Engineering Jiangsu Xuzhou221116 China Nanyang Technological University School of Electrical and Electronic Engineering Jurong West 639798 Singapore University of Electronic Science and Technology School of Mechanical and Electrical Engineering Sichuan Chengdu611731 China

The emerging Internet of Things (IoT) applications, such as driverless cars, have a growing demand for high-precision positioning and navigation. Nowadays, LiDAR inertial odometry (LIO) becomes increasingly prevalent in robotics and autonomous driving. However, many current SLAM systems lack sufficient adaptability to various scenarios. Challenges include decreased point cloud accuracy with longer frame intervals under the constant velocity assumption, coupling of erroneous IMU information when IMU saturation occurs, and decreased localization accuracy due to the use of fixed-resolution maps during indoor-outdoor scene transitions. To address these issues, we propose a loosely coupled adaptive LIO named Adaptive-LIO, which incorporates adaptive segmentation to enhance mapping accuracy, adapts motion modality through IMU saturation and fault detection, and adjusts map resolution adaptively using multiresolution voxel maps based on the distance from the LiDAR center. Our proposed method has been tested in various challenging scenarios, demonstrating the effectiveness of the improvements we introduce. The code is open-source on GitHub: Adaptive-LIO. © 2014 IEEE.

关键词： SLAM robotics

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：