检索结果-内蒙古大学图书馆

Piezoelectric inertial robot for operating in small pipelines based on stick-slip mechanism:modeling and experiment

Frontiers of Mechanical Engineering 2022年第3期17卷 109-124页

作者： Jichun XING Chao NING Yingxiang LIU Ian HOWARD School of Mechanical Engineering Yanshan UniversityQinhuangdao066004China State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin150001China School of Civil and Mechanical Engineering Curtin UniversityPerth6001Australia

Small pipes exist in industrial and biomedical fields,and require microrobots with high operational precision and large load capacity to inspect or perform functional tasks.A piezoelectric inertial pipeline robot using a“stick-slip”mechanism was proposed to address this *** this study,the driving principle of the proposed robot was analyzed,and the strategy of the design scheme was presented.A dynamics model of the stick-slip system was established by combining the dynamics model of the driving foot system and the LuGre friction model,and the simulation analysis of the effect of system parameters on the operating trajectory was *** experimental system was established to examine the output characteristics of the proposed *** results show that the proposed pipeline robot with inertial stick-slip mechanism has a great load capacity of carrying 4.6 times(70 g)its own mass and high positioning *** speed of the pipeline robot can reach up to 3.5 mm/s(3 mm/s)in the forward(backward)direction,with a minimum step distance of 4µ*** potential application for fine operation in the pipe is exhibited by a demonstration of contactless transport.

关键词： pipeline robot piezoelectric inertial drive stick-slip large load capacity dynamics model small pipeline

来源：评论

学校读者我要写书评

暂无评论

Experimental demonstration of D-band signals wireless transmission over 30 km

引用

Science China(Technological Sciences) 2025年第2期68卷 318-320页

作者： Yi WEI Xiongwei YANG Jianjun YU Xianming ZHAO Mingxu WANG Jingwen TAN Weiping LI Feng ZHAO Chengzhen BIAN Hansong MA Qinyi ZHANG Qiutong ZHANG Bing Zhang Wen ZHOU Kaihui WANG Sicong XU Jianguo YU State Key Laboratory of ASIC and System Key Laboratory for Information Science of Electromagnetic Waves(MoE)and School of Information Science and TechnologyFudan UniversityShanghai 200433China Harbin Institute of Technology Harbin 150001China School of Automation Xi’an University of Posts and TelecommunicationsXi’an 710121China School of Electronic Engineering Beijing University of Posts and TelecommunicationsBeijing 100876China

Due to the rise of innovative technologies like artificial intelligence(AI),the Internet of Things(IoT),and telemedicine,the demand for internet traffic is rapidly *** order to achieve ultra-high-speed wireless communication,many researchers are directing their efforts towards the *** D-band,spanning the frequency band 110-170 GHz,has abundant spectrum resources and license-free characteristics[1,2].

关键词： IoT wireless band

来源：评论

学校读者我要写书评

暂无评论

High-precision trajectory calibration for robot surface machining by meta-heuristic search algorithm from local error in machining area

引用

International Journal of Advanced Manufacturing technology 2025年第5期138卷 2281-2295页

作者： Bi, Guangde Lu, Lei Zhang, Lei Fan, Cheng Sun, Lining School of Mechanical and Electric Engineering Jiangsu Provincial Key Laboratory of Advanced Robotics Soochow University Suzhou215123 China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150001 China

Industrial robots used in complex surface machining are gradually increasing because of their high flexibility and large workspace. However, due to their low geometric accuracy, their application in high-precision surface machining is hindered. In order to improve the machining accuracy, a high-precision robot trajectory calibration method for complex surface machining is proposed. In the machining process, the machining trajectory is usually only within a certain machining area. In the method, high-precision standard balls are set at the boundary of the machining area. Based on the precise position information of these standard balls, the trajectory of the robot in the machining area is calibrated. Compared with the global robot calibration method, the proposed method can calibrate the robot trajectory in the machining area through standard parts, which will improve the trajectory accuracy of the machining robot to the level of repeated positioning accuracy. In this method, a large amount of standard ball data is obtained by the in-place measuring device before the machining process. Then, based on these data, a meta-heuristic search algorithm is used to calibrate the kinematic deviation of the robot measurement and the machining system. The trajectory of the machining robot is adjusted by the kinematic deviation after calibration, and it is applied to the motion control of the machining process to improve the positioning accuracy of the machining trajectory. In the end, to verify the accuracy and practicability of the machining trajectory obtained by this method, measurement and machining experiments are carried out. © The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2025.

关键词： Industrial robots

来源：评论

学校读者我要写书评

暂无评论

Enhancing Ultrasound Scanning Skills in a Leader-Follower Robotic system through Expert Hand Impedance Regulation

引用

IEEE Journal of Biomedical and Health Informatics 2025年 PP卷 PP页

作者： Niu, Baoshan Yang, Dapeng Zhang, Le Ji, Yiming Jiang, Li Liu, Hong Harbin Institute of Technology State Key Laboratory of Robotics and Systems Harbin150080 China

Traditional breast cancer surgeries require collaboration between ultrasound (US) doctors and surgeons, making the procedure complex and treating physicians prone to fatigue. In leader-follower robotic surgery, a surgeon controls an US robotic arm and an instrument robotic arm with their left and right hands, enabling independent surgical performance. However, the lack of US scanning skills among surgeons, as well as the physical separation in leader-follower operations, can negatively impact both the scanning and surgical outcomes. This paper proposes a robot-assisted scheme based on dynamic arm impedance compensation (IC) that references expert arm stiffness to compensate for novice arm stiffness. The impedance compensator adjusts the compensation strategy according to the scanning area and scanning stage. The impedance force generator estimates the scanning direction via Kalman filtering and applies stiffness and damping forces in the vertical direction to suppress tremors and other involuntary movements. The experimental results revealed that during the coarse and fine scanning phases, the probe position variance decreased by 57.9% and 73.6%, the contact force variance decreased by 55.2% and 42.5%, and the US image confidence increased by 22.0% and 23.8%, respectively. Compared with traditional filtering compensation (FC) schemes, this approach reduces the average position variance and contact force variance by 32.0% and 25.3%, respectively, and increases confidence by 7.3%. In a no-compensation test, the IC training group outperformed the FC group. This scheme can assist leader-follower US scanning and rapidly improve surgical skills. © 2013 IEEE.

关键词： Robotic surgery

来源：评论

学校读者我要写书评

暂无评论

Recent Advances in Space-Deployable Structures in China

引用

Engineering 2022年第10期17卷 207-219页

作者： Xiaofei Ma Tuanjie Li Jingya Ma Zhiyi Wang Chuang Shi Shikun Zheng Qifeng Cui Xiao Li Fan Liu Hongwei Guo Liwu Liu Zuowei Wang Yang Li Xi’an Institute of Space Radio Technology Xi’an 710100China School of Electromechanical Engineering Xidian UniversityXi’an 710071China Beijing Institute of Spacecraft System Engineering Beijing 100094China Aerospace System Engineering Shanghai Shanghai 201109China State Key Laboratory of Robotics Harbin Institute of TechnologyHarbin 150001China Department of Astronautical Science and Mechanics Harbin Institute of TechnologyHarbin 150001China

Deployable space structure technology is an approach used in building spacecraft,especially when realizing deployment and folding *** in orbit,the structures are released from the fairing,deployed,and *** the development of communication,remote-sensing,and navigation satellites,space-deployable structures have become cutting-edge research topics in space science and *** paper summarizes the current research status and development trend of spacedeployable structures in China,including large space mesh antennas,space solar arrays,and deployable structures and mechanisms for deep-space *** technologies of space-deployable structures are addressed from the perspectives of deployable mechanisms,cable-membrane form-finding,dynamic analysis,reliable environmental adaptability analysis,and ***,future technology developments and trends are elucidated in the fields of mesh antennas,solar arrays,deployable mechanisms,and on-orbit adjustment,assembly,and construction.

关键词： Deployable space structures Mesh antennas Solar arrays Deep-space exploration

来源：评论

学校读者我要写书评

暂无评论

Data-Driven Robust Model Predictive Control for Pose Tracking of Redundant Manipulators

Data-Driven Robust Model Predictive Control for Pose Trackin...

引用

IEEE International Conference on robotics and Biomimetics

作者： Zhaoyang Chen Fenglei Ni Kang Min Hong Liu State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin Heilongjiang Province China

ISBN: (数字)9798331509644

ISBN: (纸本)9798331509651

In this paper, we present a data-driven robust model predictive control (DD-RMPC) method for pose tracking of redundant manipulators. Firstly, a MPC-based trajectory tracking framework is established, in which the joint limits at three different levels (angle, velocity, and acceleration) are satisfied. Secondly, to deal with the system model's uncertainty, accelerate the error convergence speed, and reduce tracking errors, a novel data-driven RMPC is proposed, in which the system's input-output data are used to compensate for the conservatism of the system. Finally, the simulation results on a seven degrees of freedoms (DOFs) redundant manipulator show that DD-RMPC provides a faster error convergence rate and achieves smaller pose tracking errors than that of the comparison methods.

关键词： Jacobian matrices Uncertainty Trajectory tracking Simulation Biomimetics Predictive models Manipulators Data models Convergence Predictive control

来源：评论

学校读者我要写书评

暂无评论

Design, Analysis, and Experiment of a Novel Ultrasonic Printing system

Design, Analysis, and Experiment of a Novel Ultrasonic Print...

引用

2022 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2022

作者： Pei, Zhichao Zhao, Haoxiang Li, Dongjie Wang, Lefeng Rong, Weibin Sun, Lining Harbin Institute of Technology State Key Laboratory of Robotics and Systems Harbin China Harbin University of Science and Technology Heilongjiang Provincial Key Laboratory of Complex Intelligent System and Integration Harbin China

ISBN: (数字)9781665475433

ISBN: (纸本)9781665475433

Ultrasonic-driven printing technology is widely used in bioprinting because of its high precision, good biocompatibility, and low cost. However, the conventional ultrasonic printing technology still has problems such as cross-contamination of bio-ink during storage, transportation, and processing, and cumbersome ink replacement process. Therefore, a new ultrasonic printing device is developed in this paper, which uses PZT plates as the driving element. And a fluid sub-system has been fabricated based on the self-made glass micro-nozzle, which is connected to the drive element using ultrasonic couplant gel. The separation of the fluid system and the drive system has been realized through the modular design, thereby realizing the rapid replacement of different inks and this relatively independent fluid system is of great benefit to better sealing and aseptic operation. In addition, a digital model is built to analyze its working mechanism. And an experimental system is established to characterize the performance of the device. The results show that the system can generate droplets stably and accurately, and the droplet volume can be controlled by the excitation voltage amplitude and pulse width. © 2022 IEEE.

关键词： Biocompatibility

来源：评论

学校读者我要写书评

暂无评论

Resilient Event-Triggered Model Predictive Control for Adaptive Cruise Control Under Sensor Attacks

引用

IEEE/CAA Journal of Automatica Sinica 2023年第3期10卷 807-809页

作者： Zhijian Hu Rong Su Kai Zhang Zeyuan Xu Renjie Ma School of Electrical and Electronic Engineering Nanyang Technological UniversitySingapore 639798Singapore Key Laboratory of Ultra-Precision Intelligent Instrumentation Ministry of Industry and Information Technologyand the Center of Ultra-Precision Optoelectronic Instrument EngineeringHarbin Institute of TechnologyHarbin 150001China Department of Control Science and Engineering Harbin Institute of TechnologyHarbin 150001China Department of Chemical and Biomolecular Engineering National University of SingaporeSingapore 117585Singapore State Key Laboratory of Robotics and Systems Harbin Institute of TechnologyHarbin 150001China IEEE

Dear Editor,This letter addresses the resilient model predictive control(MPC)problems for adaptive cruise control(ACC)systems under sensor *** the light of vulnerabilities of ACC systems to sensor attacks,an intrusion detection mechanism is proposed at the controller side to distinguish abnormal ***,the robust control gains are derived to design the terminal region constraint for MPC.

关键词： Trigger Event constraint

来源：评论

学校读者我要写书评

暂无评论

Design and Control of Continuous Jumping Gaits for Humanoid Robots Based on Motion Function and Reinforcement Learning

引用

Procedia Computer Science 2024年 250卷 51-57页

作者： Zida Zhao Shilong Sun Haodong Huang Qingbin Gao Wenfu Xu State Key Laboratory of Robotics and System (HIT) Harbin Institute of Technology Harbin Heilongjiang China School of Mechanical Engineering and Automation Harbin Institute of Technology Shenzhen 518055 China

Continuous jumping of humanoid robots is a challenging problem that requires appropriate gait and force control for the robot to achieve. Reinforcement learning (RL) has been applied to the motion control of humanoid robots and has achieved significant progress. However, traditional RL control methods primarily rely on designing reward signals to generate human-like movements, and it requires developing complex reward signals for continuous jumping, resulting in limited actions and suboptimal jumping performance. To address this issue, we have designed motion functions for humanoid continuous jumping and incorporated them into the RL framework to obtain desired human-like continuous jumping actions. Furthermore, two different jumping gaits are designed to investigate the jumping effects produced by different jumping functions: bent-knee jumping (BJ) and straight-knee jumping (SJ). BJ is a typical jumping style where the legs flex during the jumping process to accumulate energy, enabling higher explosive power. SJ is more suitable for tasks requiring quick responses, as the legs remain upright during the jump, providing faster reaction speed. The performance in continuous jumping tasks has been evaluated by comparing the effects of training with different jumping functions. This research has particular guidance for improving the jumping ability of robots and enhancing the stability and efficiency of humanoid continuous jumping.

关键词： Continuous jumping gaits Humanoid robots Motion function Reinforcement learning

来源：评论

学校读者我要写书评

暂无评论

Design of Gravity Compensation Scheme for Passive Lifting Method of Multi-degree Freedom Robotic Arm 18

Design of Gravity Compensation Scheme for Passive Lifting Me...

引用

18th IEEE Conference on Industrial Electronics and Applications, ICIEA 2023

作者： Sun, Jing Wei, Chaoran Chen, Haotai Wang, Bin Li, Xingguang Zhang, Qiang Beijing Institute of Control Engineering Space Drive and Manipulation Mechanism Laboratory Beijing China State Key Laboratory of Robotics and Systems Harbin Institute of Technology Harbin China

ISBN: (纸本)9798350312201

Before launching a spacecraft, it is necessary to undergo micro low gravity simulations on the ground to test its reliability. The lifting method is not limited by movement time and space, and can simulate long-term low gravity environments. However, the degree of freedom of spatial mechanisms is gradually increasing, and the motion is becoming increasingly complex, making traditional lifting methods unable to meet the needs. In response to the above issues, a lifting gravity simulation scheme for a multi degree of freedom robotic arm that can achieve complex motion is proposed. The design adopts a single sling combined with a hanger to avoid interference during the motion process. Finally, simulation and experiments have proven the feasibility of the scheme - it can achieve efficient unloading without affecting the normal movement of the equipment. © 2023 IEEE.

关键词： Robotic arms

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：