检索结果-内蒙古大学图书馆

2023 IEEE International Conference on robotics and Biomimetics, ROBIO 2023

作者： Zhang, Hongan Tang, Junyue Wang, Yinchao Lu, Zixiao Wang, Bo Cao, Miaoyan Jiang, Shengyuan Yanshan University Mechanical Engineering Qinhuangdao China Harbin Institute of Technology State Key Laboratory of Robotics and System Harbin China Shenyang Aerospace University Mechatronics Institute Shenyang China Chinese Academy of Science National Center for Nanoscience and Technlogy Beijing China China Academy of Space Technology Beijing China

ISBN: (纸本)9798350325706

A lunar regolith in-situ analysis payload deploying a mass spectrometer is proposed to exactly detect the water ice of the South Pole of the moon for China future lunar exploration missions. In order to realize the goal, an airtight heating furnace for volatile extraction from lunar regolith is desired. In this paper, sealing methods for lunar regolith volatile in heating furnace to future proposed in-situ sampling and analysis of lunar samples were investigated based on power requirements, furnace closing accuracy requirements, dust tolerance and operation in the Lunar environment. Methods implemented include a balanced metal hollow ring seal, a double channel ferrule tab ring radial seal and a spring energized seal. Comparing the performance of sealing methods under the above conditions, a spring energized seal is selected as the heating furnace seal. The materials and structure of the seal are designed based on the rigidity requirements, leakage rate requirements and working environment requirements. In order to test the sealing performance of seals after repeated sealing in high and low temperature environments, a seal leak detection system was designed. The test results indicate that the seal can meet the sealing performance requirements after repeated sealing at various temperatures. © 2023 IEEE.

关键词： Dust tolerance Leakage rate Lunar environment Repeated sealing Spring energized seal

来源：评论

学校读者我要写书评

暂无评论

Using Zone Inflation and Volume Transfer to Design a Fabric-based Pneumatic Exosuit with both Efficiency and Wearability

arXiv

引用

arXiv 2024年

作者： Liu, Chendong Yang, Dapeng Chen, Jiachen Dai, Yiming Jiang, Li Xie, Shengquan Liu, Hong State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China School of Electronic and Electrical Engineering University of Leeds Leeds United Kingdom

Fabric-based pneumatic exosuits have a broad application prospect due to their good human-machine interaction performance, but their structural design paradigm has not yet been finalized and requires in-depth research. This paper proposes the concepts of zone inflation and volume transfer for the design of a fabric-based pneumatic exosuit with both efficiency and wearability. The meaning of zone inflation is to divide the inflation area of pneumatic exosuit into inflation-deflation zone and inflation-holding zone which can reduce the consumption of compressed air and improve efficiency. Volume transfer, a strategic distribution method of inflatable regions inside the garment, can effectively enhance the wearability of the exosuit. Using inexpensive thermoplastic polyurethane film and clothing fabric, the exosuit is made by heat pressing and sewing. The exosuit has a response time of 0.5s, a stress area of 1500mm2, and a profile of only 32mm, which can be hidden inside common clothing. A mathematical model is developed to predict the output torque of the exosuit with an error of 3.6%. Mechanical experiments show that the exosuit outputs a torque of 9.1Nm at a pressure of 100kPa. Surface electromyography experiments show that the exosuit can provide users with a boost from sitting to standing, with an average reduction in electromyography signals of 14.95%. The exosuit designed using these methods synthesizes efficiency and wearability and is expected to be an ideal paradigm for fabric-based pneumatic exosuits. Copyright © 2024, The Authors. All rights reserved.

关键词： Pneumatic actuators

来源：评论

学校读者我要写书评

暂无评论

Text-Derived Relational Graph-Enhanced Network for Skeleton-Based Action Segmentation

arXiv

引用

arXiv 2025年

作者： Ji, Haoyu Chen, Bowen Ren, Weihong Huang, Wenze Yang, Zhihao Wang, Zhiyong Liu, Honghai State Key Laboratory of Robotics and Systems Harbin Institute of Technology Shenzhen Shenzhen518055 China

Skeleton-based Temporal Action Segmentation (STAS) aims to segment and recognize various actions from long, untrimmed sequences of human skeletal movements. Current STAS methods typically employ spatio-temporal modeling to establish dependencies among joints as well as frames, and utilize one-hot encoding with cross-entropy loss for frame-wise classification supervision. However, these methods overlook the intrinsic correlations among joints and actions within skeletal features, leading to a limited understanding of human movements. To address this, we propose a Text-Derived Relational Graph-Enhanced Network (TRG-Net) that leverages prior graphs generated by Large Language Models (LLM) to enhance both modeling and supervision. For modeling, the Dynamic Spatio-Temporal Fusion Modeling (DSFM) method incorporates Text-Derived Joint Graphs (TJG) with channel- and frame-level dynamic adaptation to effectively model spatial relations, while integrating spatio-temporal core features during temporal modeling. For supervision, the Absolute-Relative Inter-Class Supervision (ARIS) method employs contrastive learning between action features and text embeddings to regularize the absolute class distributions, and utilizes Text-Derived Action Graphs (TAG) to capture the relative inter-class relationships among action features. Additionally, we propose a Spatial-Aware Enhancement Processing (SAEP) method, which incorporates random joint occlusion and axial rotation to enhance spatial generalization. Performance evaluations on four public datasets demonstrate that TRG-Net achieves state-of-the-art results. © 2025, CC BY.

关键词： Spatio-temporal data

来源：评论

学校读者我要写书评

暂无评论

Study of the shear strength behavior in flip chip under thermo-mechano-electrical coupling and different solder height

Study of the shear strength behavior in flip chip under ther...

引用

International Conference on (ICEPT) Electronic Packaging technology

作者： Bin Zhou Jianxin Qiao Yunkang Su Dapeng Liu Wentao Huang Longqiu Li State Key Laboratory of Robotics and System Key Laboratory for Microsystems and Microstructure Manufacturing Harbin Institute of Technology Harbin China School of Mechanical and Electrical Engineering Harbin Institute of Technology Harbin China

Complicated service environment such as thermo-mechano-electrical coupling field and limited solder height have brought great challenges to the reliability of flip chips packaging and hindered the chip integration process. In this work, mechanical properties of 3.0Ag-0.5Cu(SAC305) solder under different service environment and height were investigated at macroscopic and microcosmic level. The flip chip shear test is realized on the universal test machine use the proposed fixture. The shear strength shows declining trend with the increment of coupling fields and solder heights. The underlying mechanism of strength loss is thermal softening effect and reduction rate could reach 42.77% at most. The Scanning Electron Microscopy (SEM) is used to analysis the fracture morphology and intermetallic compound (IMC) layer. The shear strength was negatively correlated with the thickness of IMC layer, and was positively correlated with fractal dimension of fracture morphology. The result shows that the thickness of IMC layer is the highest while the field is thermo-mechano-electrical and the solid height is 398μm. Meanwhile, the fractal dimension of fracture morphology is the lowest.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Enveloping grasp planning of a three-fingered deployable metamorphic robotic grasper

Enveloping grasp planning of a three-fingered deployable met...

引用

IEEE International Conference on Cyborg and Bionic systems (CBS)

作者： Changqing Gao Yang Zhang Hong Lei Xi Kang Peng Xu Bing Li School of Mechanical Engineering and Automation Harbin Institute of Technology Shenzhen China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China

This paper takes a three-fingered deployable metamorphic robotic grasper as the studied object and presents a novel enveloping grasp planning method, by which the robotic grasper can grasp objects with different sizes and shapes more effectively and stably. Firstly, the mechanism design and key performances of the robotic grasper are briefly introduced. Secondly, the static analysis of the grasping motion process is conducted and the factors affecting static equilibrium are also analyzed, based on which the mathematical model of static equilibrium is established, and the relationship between grasping force and grasping posture is obtained. Then, an optimization model of static enveloping grasp with the grasping angle as the variable is proposed, by which the best grasping posture can be obtained. Thirdly, to prove the effectiveness of the proposed enveloping grasp planning method, a group of grasping simulations is performed and the results show that this method is feasible and reliable.

关键词： Shape Biological system modeling Force Grasping Static analysis Mathematical models Planning

来源：评论

学校读者我要写书评

暂无评论

A Look-Up Table Based Inverter Nonlinearity Compensation Method Considering Parameter Inconsistency of Upper and Lower Bridge Arms

A Look-Up Table Based Inverter Nonlinearity Compensation Met...

引用

IEEE International Symposium on Industrial Electronics (ISIE)

作者： Yonghe Huang Dianguo Xu Yan Xu Yong Yu Junyu Zhao Xubo Gong School of Electrical Engineering and Automation Harbin Institute of Technology Harbin China The State key Laboratory of Robotics and Systems Harbin Institute of Technology Harbin China

ISBN: (数字)9798350394085

ISBN: (纸本)9798350394092

In motor drive systems, voltage source inverter (VSI) nonlinearity will produce voltage error, cause current harmonics, and affect the control performance. Among the VSI nonlinearity factors, the parasitic capacitance is the fundamental cause of the nonlinear relationship between voltage error and phase current. If the parameter inconsistency of the upper and lower bridge arm is not considered, the voltage error is an odd function. However, in practical applications, the parameters of the upper and lower bridge arms are usually slightly different, and the voltage error will no longer be an odd function. Considering the influence of parameter inconsistency, this article proposes an accurate look-up table (LUT) based method for VSI nonlinearity compensation. By injecting positive staircase current and negative staircase current separately in self-commissioning process, an accurate voltage error LUT is obtained through numerical fitting methods. The proposed method does not require any parameter of power devices. Experimental results verify the effectiveness of the proposed method.

关键词： Industrial electronics Motor drives Accuracy Voltage source inverters Fitting Bridge circuits Table lookup

来源：评论

学校读者我要写书评

暂无评论

A Trajectory Planning Algorithm of Spray Robot for Workpieces with Complex Geometric Features based on 3D Point Cloud 5

A Trajectory Planning Algorithm of Spray Robot for Workpiece...

引用

5th IEEE Information technology, Networking, Electronic and Automation Control Conference, ITNEC 2021

作者： Kong, Minxiu Li, Ang Gao, Feng Harbin Institute of Technology School of Mechatronics Engineering Harbin China State Key Laboratory of Robotics and System Harbin China

ISBN: (纸本)9781665415989

Trajectory planning of spray robot for workpieces with complex geometric features is always a challenging problem. Combined with the actual process requirements of surface spraying and edge spraying, a new spraying path design method based on 3D point cloud is proposed in this paper. During surface spraying, the automatic segmentation algorithm of spraying area based on the determination of hole ratio and Euclidean clustering is studied. For the area with dense features, the point cloud slicing algorithm is used to generate the spray path. For the narrow area, the flexible midline extraction algorithm is proposed. We also discussed the edge extraction algorithm to generate the edge spray path. According to the simulation results of coating thickness, this method can not only ensure the uniformity of coating thickness, but also ensure high spraying efficiency with low paint waste. © 2021 IEEE.

关键词： Clustering algorithms

来源：评论

学校读者我要写书评

暂无评论

Construction and evaluation of SLAM and navigation system for mobile robot based on diverse environments

Construction and evaluation of SLAM and navigation system fo...

引用

2021 IEEE International Conference on Real-Time Computing and robotics, RCAR 2021

作者： Wang, Haodong Guo, Wei Fu, Yu Harbin Institute of Technology State Key Laboratory of Robotics

ISBN: (纸本)9781665436786

In this paper, a complete mapping, localization and navigation framework based on ROS system is proposed. And on this experimental platform, a variety of environments are built based on the 3D simulation software gazebo. In the simulation experiment, gmapping and cartographer are used to build occupancy map in real time. The evaluation strategy of the SLAM system is proposed, and the experiment result evaluation based on different environment and parameters is completed. © 2021 IEEE.

关键词： Simulation platform

来源：评论

学校读者我要写书评

暂无评论

A Real-Time Hardware-Accelerator-Aided MJ-EKF SLAM Algorithm for Large-Scale Map Based on Heterogeneous Multi-Core SoC

A Real-Time Hardware-Accelerator-Aided MJ-EKF SLAM Algorithm...

引用

Annual Conference of Industrial Electronics Society

作者： Zhendong Fan Ke Wang Minjie Bao Ruifeng Li State Key Laboratory of Robotics and Systems Harbin Institute of Technology Harbin China

As a classic SLAM algorithm, LIDAR-based EKF SLAM still remains a problem. An open issue is high computational complexity, which leading a very limited map size to sufficient real-time requirements. To address this problem, in this paper, we propose an MJ-EKF SLAM system that is fully implemented on a Heterogeneous Multi-Core SoC(HMS). To limit the EKF SLAM computation complexity, the Map Joining algorithm participates in the framework. The most computation cost step in EKF SLAM and Map Joining algorithms is implemented on an MJ-EKF dedicated accelerator. Meanwhile, several hardware optimization methods are proposed to save logic resources, avoid redundant computation and reduce data communication between on-chip memory and off-chip main memory. Field experiments demonstrate the HMS-based MJ-EKF algorithm achieved high real-time performance (over 30Hz) in a large-scale map with 500 landmarks.

关键词：

来源：评论

学校读者我要写书评

暂无评论

An Origami-Based Miniature Jumping Robot with Adjustable Jumping Trajectory and Enhanced Intermittent Jumps

An Origami-Based Miniature Jumping Robot with Adjustable Jum...

引用

IEEE/RSJ International Conference on Intelligent Robots and systems (IROS)

作者： Zhipeng Xiong Lingqi Tang Longlong Hu Songlin Yang Xiaojun Yang Yao Li Bing Li School of Mechanical Engineering and Automation Harbin Institute of Technology Shenzhen China Guangdong Key Laboratory of Intelligent Morphing Mechanisms and Adaptive Robotics Harbin Institute of Technology Shenzhen China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China

A small-scale jumping robot can reach obstacles much larger than its size. It is important for a jumping robot to perform intermittent jumps to cross through rough terrains. However, the limitations of conventional structures hinder the further integration of functions to a miniature (sub-50 g) jumping robot. No sub-50 g jumpers could perform intermittent jumps with adjustable jumping trajectories. In this work, we proposed an origami-based miniature jumper, which performed intermittent jumps with adjustable omni-directional trajectories. The intermittent jumps were achieved by the jumping and self-righting mechanisms, which were actuated by a single motor. The clockwise and counterclockwise rotation of the motor actuated the loading, self-righting and triggering process, respectively. The jumping height was adjustable by adjusting the rotation angle of the motor. Meanwhile, the take-off pitch & yaw angle adjustment methods were integrated into the robot. Therefore, we demonstrated a 9 cm, 13.5 g prototype with functions of re-loading, self-righting, jumping height adjustment and take-off pitch & yaw angle adjustment. The robot could adjust jumping height from 16 to 34 cm and self-right for the next jump. The results revealed that our robot could jump across different obstacles with different scales and directions. The mobility was greatly increased compared with other miniature jumping robots.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：