检索结果-内蒙古大学图书馆

A fast algorithm for manipulation control process of distribution system planning solution

Journal of Modern power systems and Clean Energy 2019年第6期7卷 1547-1558页

作者： Lin CHENG Yuxiang WAN Liting TIAN Fang ZHANG State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical EngineeringTsinghua UniversityBeijingChina School of Electrical Engineering Beijing Jiaotong UniversityBeijingChina

Better flexibility and controllability have been introduced into distribution system with the development of new loads and *** a consequence,the connotations and tools for evaluating the planning solution need to be further *** paper proposes a fast algorithm to quantify steady-state voltages and load profiles in distribution system by simulating the manipulation control process of controllable resources,taking the efficiency and ease of use into *** this method,a complex distribution system is decoupled into several simple parts according to the ports of the DC ***,to achieve the qualified voltages and load profiles,the manipulation details of controllable resources are simulated following a certain control sequence in each ***,the analysis results of each part are matched and filtered to obtain a complete *** types of the most commonly controllable resources are considered in this *** effectiveness of the proposed method is demonstrated through a case study based on field data from an actual distribution system.

关键词： controllable resources Distribution system DC interlink Planning Manipulation control process

来源：评论

学校读者我要写书评

暂无评论

Life prediction and reliability analysis of motorbearing based on vibration signal 7

Life prediction and reliability analysis of motorbearing bas...

引用

7th International Conference on Reliability of Electrical Products and Electrical Contacts, ICREPEC 2019

作者： Xu, Helin Cheng, Lin Wan, Yuxiang Qi, Ning State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Tsinghua University Beijing100084 China

ISBN: (纸本)9789881532343

As an important power equipment in the power system, the electrialc motor is an important part of the transformation of electric energy and mechanical energy. Reasonable prediction of the reliability level of the running motor, timely and effectively avoid the operational risks, can effectively ensure the safety and stable operation of the power system. This paper starts with the motor vibration signal and establishes the remaining life prediction based on SVM(Support Vector Machine). Firstly, the vibration signal is denoised by wavelet transform, and the characteristic parameters such as mean square value is extracted after signal data reconstruction. Further, combined with the characteristic value, the working state is divided, and the support vector machine regression prediction model is used to obtain the remaining life of the bearing. In the case study part, data denoising and feature extraction are performed on the bearing vibration data measured by the PRONOSTIA test bench. The trend of the selected characteristic values is used for evaluating the motor operating state. The characteristic value, running state of the equipment, and remaining life which are extracted from the training set data are input to the SVM, and then the SVM is used to predict the remaining life for the test set. Finally, failure rate of the equipment can be derived. © 2019 by International Academic Publishers Ltd.

关键词： Reliability analysis

来源：评论

学校读者我要写书评

暂无评论

AC-constrained Optimal power Flow Considering Wind power generation Uncertainty in Radial power Networks 34

AC-constrained Optimal Power Flow Considering Wind Power Gen...

引用

第三十四届中国控制会议

作者： LIU Bin LIU Feng MEI Shengwei State Key Lab of Control and Simulation of Power Systems and Generation Equipment Department of Electrical EngineeringTsinghua University

ISBN: (纸本)9781467374439

Wind power generation uncertainty has imposed great challenge on power systems' operation and should be considered when making an operation *** this paper,we focus on optimal power flow(OPF) problem in radial power networks while considering wind power generation *** cope with this uncertainty,the stochastic AC-constrained OPF(ACOPF) problem considering both continuous and discrete devices is formulated based on our previous *** second order cone relaxation is employed to relax the original mixed integer nonconvex nonlinear programming(MINNLP) problem to a mixed integer second order cone programming(MISOCP) problem which can be solved by commercial solvers with high computation *** modified IEEE 33 bus distribution system is studied in this paper which validate the effectiveness of the proposed model.

关键词： optimal power flow wind power stochastic optimization radial power networks uncertainty set

来源：评论

学校读者我要写书评

暂无评论

Inhibiting liquid permeation into silicone rubber by superhydrophobic coating for prolonged service life

引用

High Voltage 2023年第5期8卷 986-996页

作者： Shuming Liu Ying Zhou Zhou Zuo Shuqi Liu Qian Wang Zhong Chen Xidong Liang State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical EngineeringTsinghua UniversityBeijingChina School of Material Science and Engineering Nanyang Technological UniversitySingaporeSingapore

Liquid permeation into silicone rubber(SR)may lead to the degradation or complete failure of the composite *** to inhibit liquid permeation,two kinds of superhydrophobic coatings are applied to the SR *** liquid permeation properties of SR with different types of liquids are investigated,and the Langmuir diffusion model is applied to analyse the experimental *** results show that the composite superhydrophobic coating can effectively inhibit liquid permeation by reducing the contact area between the surface and liquid,and the stable structure of the composite coating can maintain the performance after the liquid permeation and ***,the nano‐particle coating without the polymer binder experiences severe performance degradation during the immersion test,and it cannot restrain the liquid permeation anymore after it loses the *** a validation of the effective protection,the insulation resistivity change was *** resistivity decreases sharply for the pristine SR after water permeation;however,the decrease is much smaller for the coated *** current study not only provides new insight into the liquid permeation properties of SR with different surface wettability but also suggests an effective measure to prevent liquid permeation into SR.

关键词： coating permeation liquid

来源：评论

学校读者我要写书评

暂无评论

An Improved OPA Model in power System Considering Planning 33

An Improved OPA Model in Power System Considering Planning

引用

第三十三届中国控制会议

作者： GONG Yuan MEI Shengwei PENG Dong LONG Wangcheng GUO Mingxing Power Systems and Power Generation Equipment Control and Simulation National Key Laboratory Department of Electrical Engineering Tsinghua University State Power Economic Research Institute

ISBN: (纸本)9781479947249

The power system now is a typical complex system, which has inherent characteristics of SOC. Studying on cascading failures are necessary and meaningful to insure the grid's safety, national security and economic development. This paper firstly establishes the indices of power system development diagnosis, which are closely relevant to the trigger of power system evolution. Then a cascading failure model is proposed, considering planning and evolution of the power system. This model is based on OPA model, including both fast dynamics and slow dynamics. The slow dynamic process simulates the evolution of power system, which represents the functions of the planning department, while the fast dynamic process simulates power flow and cascading failures, which takes the effects of dispatch, relay protection and automation into consideration. Moreover, simulations are tested on the case of Kaifeng-Shangqiu power system in Henan Province of China, and evolution results are presented.

关键词： power system evolution,cascading failure,power system diagnosis,power grid complexity,OPA model

来源：评论

学校读者我要写书评

暂无评论

Study on static and dynamic characteristics of the electro-hydraulic proportional directional valve

引用

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2025年

作者： Yang, Meisheng Kun, Lian Shuang, Luo Jiahan, Bao Huaizhi, Zong Anhui Province Engineering Laboratory of Intelligent Demolition Equipment Anhui University of Technology Maanshan China State Key Laboratory of Fluid Power and Mechatronic Systems Zhejiang University Hangzhou China Anhui Key Laboratory of Mine Intelligent Equipment and Technology Anhui University of Science and Technology Huainan China Anhui Province Key Laboratory of Advanced Numerical Control & Servo Technology AnHui Polytechnic University Wuhu China Engineering Technology Research Center of Hydraulic Vibration Technology Anhui University of Technology Maanshan China

Electro-hydraulic proportional directional valves are widely used in precision engineering fields, where their operational stability and reliability are critical to the performance of hydraulic systems. However, high pressure and high-frequency responses significantly affect the hydraulic forces acting on the spool, while deformations caused by pressure and thermal loads may further compromise its performance. Therefore, analyzing and compensating for hydraulic forces, as well as investigating the deformation behavior of the spool under pressure and thermal loads, are essential for enhancing its stability and reliability. Based on CFD numerical calculation methods and fluid-thermal-solid multi-physics coupling technology, the study systematically investigates the characteristics of hydraulic forces and the deformation behavior of the spool. First, Fluent was used to simulate the fluid domain under steady-state and transient conditions, obtaining pressure and velocity contour maps, flow rate curves, and the hydraulic forces acting on the spool in different structural cavities formed by the valve sleeve and spool at different valve opening degrees. The analysis identified the best cavity configuration for compensating hydraulic forces between the valve sleeve and spool. Secondly, orthogonal experimental design and numerical simulation were conducted for the arc-shaped transition cavity, followed by multi-objective optimization using a genetic algorithm. The optimized structure reduced the steady-state hydraulic force to varying extents, with a maximum reduction of 23%. Finally, the fluid-thermal-solid multi-physics coupling technology was employed, selecting the optimal structure with the best hydraulic force compensation effect for analysis. The results show that the deformation of the spool in both radial directions increase as the valve opening increases. At a valve opening of 1 mm, the maximum radial deformation in the Z direction is 7.0471 μm. Additionally, with

关键词： deformation Directional valve hydraulic forces mass flow rate optimization

来源：评论

学校读者我要写书评

暂无评论

Operational Reliability Modeling and Assessment of Battery Energy Storage Based on Lithium-ion Battery Lifetime Degradation

引用

Journal of Modern power systems and Clean Energy 2022年第6期10卷 1738-1749页

作者： Lin Cheng Yuxiang Wan Yanglin Zhou David Wenzhong Gao State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical EngineeringTsinghua UniversityBeijingChina Department of Electrical and Computer Engineering University of DenverDenverUSA IEEE

Battery energy storage(BES)systems can effectively meet the diversified needs of power system dispatching and assist in renewable energy *** reliability of energy storage is essential to ensure the operational safety of the power ***,BES systems are composed of battery *** suggests that BES performance depends not only on the configuration but also on the operating state over different lifetime *** lack of safety and reliability is the main bottleneck preventing widespread applications of BES ***,a reliability assessment algorithm and a weak-link analytical method for BES systems are proposed while considering battery lifetime ***,a novel lithium-ion battery model is proposed to identify the degradation rate of solid electrolyte interphase film formation and capacity *** impacts of different operating conditions are considered in stress factor ***,a reliability assessment algorithm for a BES system is introduced based on a universal generating *** innovative weak-link analytical method based on the reliability importance index is proposed that combines the evaluation results of state-oriented and state-change-oriented indexes through an entropy weight *** model,algorithm,indexes,and the usefulness are demonstrated in case studies based on aging test data and actual bus operating *** results demonstrate the effects of the battery status and working conditions on BES ***-link analysis is also used to assist BES systems in avoiding short-board batteries to achieve long lifetimes and efficient operation.

关键词： Battery energy storage lifetime degradation operational reliability capacity plummeting weak-link analysis

来源：评论

学校读者我要写书评

暂无评论

Synergistic utilization of coal and other energy- key to low carbon economy

引用

能源前沿 2011年第1期5卷 1-19页

作者： Weidou NI Zhen CHEN State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Thermal EngineeringTsinghua UniversityBeijing 100084China

In China, coal is a dominant component of energy mix, and it is expected to remain as such over the next 30 to 40 years. Coal is expected to be used even more in power generation. The direct combustion of coal already has been causing severe pollution and ecological degradation, and it is quite difficult to address the need to reduce greenhouse gas (GHG) given the direct combustion of coal. Therefore, the polygeneration system based on coal gasification, which is one of the major examples of synergistic utilization of coal, is proposed. It is a comprehensive solution to meet the energy challenges China is facing. Furthermore, the synergy of fossil fuels (especially coal) with renewable energy, the synergy of different kinds of energy for energy storage, the synergy of centralized and distributed supply of different kinds of energy, and the synergy of different kinds of energy in smart energy grid (power, gas, heat, and water) are the keys to making China a low-carbon economy. Carbon dioxide (CO2) mitigation in China should begin from the coalchemical industry given their accumulated relevant experiences. The mitigation process should gradually be transformed into the 'IGCC + polygeneration + CCUS'.The objectives of this paper are to describe the synergistic utilization of coal, and to analyze the synergy of coal with other energy resources, and to propose the scientific and technological problems to achieve these synergies.

关键词： synergy clean and efficient utilization of coal coal-based polygenration CO2 mitigation energy storage

来源：评论

学校读者我要写书评

暂无评论

Effect of Multiple Models of Closed-loop Transfer Functions on Inter-harmonic Oscillation Characteristics of Grid-connected PMSG

引用

CSEE Journal of power and Energy systems 2024年第5期10卷 1955-1964页

作者： Jingyi Li Jianjun Yang Xiaorong Xie Haozhi Li Ke Wang Zhaohui Shi Key Laboratory of Far-shore Wind Power Technology of Zhejiang Province Huadong Engineering Corporation LimitedPower ChinaHangzhou 310014China. State Key Lab of Control and Simulation of Power Systems and Generation Equipment(Dept.of Electrical Engineering Tsinghua University)Beijing 100084China.

Establishing a suitable closed-loop transfer function model for the grid-connected PMSG system is the key basis in performing inter-harmonic characteristics *** closed-loop transfer functions can be constructed when different components of the converter controller are taken into ***,the effect of different components of the converter controller on inter-harmonic stability analysis is not *** this paper,the complete transfer function,considering different loops,is first *** on the complete closed-loop transfer function,the DC-link,PLL and voltage forward-feed are removed step by step to derive different closed-loop transfer *** inter-harmonic related poles of different closed-loop transfer functions are further calculated to analyze the effect of closedloop transfer functions on inter-harmonic characteristics ***,by performing time domain simulation,the correctness of the theoretical analysis results is *** results show that under the conditions of a weak AC system,each loop of the converter control system will reduce the stability of the interharmonic in the sub-synchronous frequency range and influence the inter-harmonic oscillation *** transfer function needs to consider the influence of each loop to accurately calculate the inter-harmonic stability of the system.

关键词： Closed-loop transfer function converter controller inter-harmonic characteristics PMSG

来源：评论

学校读者我要写书评

暂无评论

A Novel Modeling Method for power Flow Calculation of Integrated Enegy Network 13

A Novel Modeling Method for Power Flow Calculation of Integr...

引用

2022 IEEE International Conference on power systems Technology, powerCON 2022

作者： Tian, Liting Zhou, Xuyan Lin, Cheng Yin, Zheng Lin, Ende Equipment Tsinghua University State Key Laboratory of Control and Simulation of Power Systems and Generation Beijing China Institute of Science and Technology China Three Gorges Corporation State Key Laboratory of Control and Simulation of Power Systems Beijing China

ISBN: (数字)9781665417754

ISBN: (纸本)9781665417754

Multi-energy systems may contain integrated energy networks such as electrical, gas and heating networks. The differences in the physical characteristics of each energy network make it difficult to solve power flows of the integrated energy networks. Based on the concept of energy flow, this paper realizes the unified modeling of electrical, gas and heating network to describe the stable equilibrium relationship. The basic equations for energy flow calculation contains Kirchhoff's Current Law equations, Kirchhoff's Voltage Law equations, and energy flow efficiency equations. A weighted directed graph is used to model the total system with networks and energy hubs. The proposed model is used for the joint power flow solution of the multi-energy system with Newton-Raphson algorithm. Finally, the validity and accuracy of the model are verified in a test system. © 2022 IEEE.

关键词： Newton-Raphson method

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：