检索结果-内蒙古大学图书馆

Experimental analysis of DC pre-excitation for 3-level inverter-motor system

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 2006年第3期26卷 159-163页

作者： Bai, Hua Zhao, Zheng-Ming Hu, Xian Chen, Xin State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua University Beijing 100084 China South Automation Company Nanjing 210003 China

In the AC adjusting speed system, the significant current impulse frequently occurs in the starting process while the output torque is sufficient. This would damage the power electronics device, cause the unbalance of neutral point in three-level NPC topology, and deteriorate the starting performance. In this paper, a DC pre-excitation strategy, which limits the starting current and enhances the electromagnetic torque via establishing the flux linkage before starting process, is proposed to the three-level inverter under analysis on the mechanism of the above large current. The relevant experiments present its eminent effect on the 380 V/160 kW inverter-motor system. Also this paper discuss the feasibility of its application in high voltage high power inverter.

关键词： Induction motors

来源：评论

学校读者我要写书评

暂无评论

Risk-based study on under voltage load shedding schemes

引用

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 2006年第19期26卷 18-22页

作者： Dai, Jian-Feng Zhu, Ling-Zhi Zhou, Shuang-Xi Lu, Zong-Xiang State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Beijing 100084 China

A risk based method is proposed to design under voltage load shedding (UVLS) scheme. Different with traditional methods, the proposed one employs a series of risk indices, which are obtained based on a full-scale contingencies analysis, to determine the operating parameters of load shedding. According to this method, the load bus, in which the UVLS can exert itself with the highest efficiency to prevent voltage collapse, is selected as the first candidate to execute load shedding. And the amount of loads to be shed is identified though a relationship between risk values and shedding amount. The selection of shedding time conforms to the principle that the compound risk brought by failed shedding and unexpected shedding must be the minimum. Experiments conducted for IEEE 39-bus system reveal that the proposed method redound to identify the location, amount and time of load shedding more accurately and reasonably due to taking into account a great deal of uncertain factors.

关键词： Electric load shedding

来源：评论

学校读者我要写书评

暂无评论

Study on probability of voltage instability based on the stochastic characteristic of load margin index

引用

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 2006年第13期26卷 26-30页

作者： Dai, Jian-Feng Wang, Hai-Chao Zhou, Shuang-Xi Lu, Zong-Xiang Zhu, Ling-Zhi State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Beijing 100084 China

In order to make up the deficiency of traditional analytical method used in the research of voltage stability problem, we need to know the probability information concerned with voltage instability. Therefore, this paper proposes a method to calculate the probability of voltage instability based on the stochastic characteristic of load margin index. This method firstly determines the stochastic characteristic of load margin index through an analysis about the randomicity of parameters which tie up with the tracing of critical point in continue power flow computation, and then figures out the probability of voltage instability by using moment and cumulate method. Owing to take into account more uncertain factors' influence on the voltage stability, the result acquired by this method is much more accurate and reasonable. A numerical simulation based on IEEE 39-bus system reveals that the proposed method works properly.

关键词： Electric power systems

来源：评论

学校读者我要写书评

暂无评论

Improved simultaneous extrapolation in sharp impulse signals in time and frequency domains

引用

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 2006年第18期26卷 133-137页

作者： Zou, Jun Guo, Jian He, Jin-Liang Zhang, Bo Teng, Wen-Rui State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing 100084 China Dept. of Electrical Engineering Henan University of Technology Zhengzhou 450042 China

The characteristic of the transient response of the grounding system takes on a fast rising and slow damping with the lightning excitation. An improved simultaneous time and frequency domain extrapolation method is presented based on Hermite function expansion, which takes the above mentioned characteristic of the transient signal into account, using early time response and low-frequency data, the complete electromagnetic response is generated. By using mutually complementary data, simultaneous extrapolation in time and frequency domains are carried out by using the Hermite polynomials as the basis function. However, the extrapolation method is not suitable to deal with the transient response with the fast pulse excitation. The improvement for the extrapolation method is to pre- and post-process the transient response data with the fast pulse excitation. As a pre-processed procedure, in order to reduce the condition number of the matrix used for determined the coefficient of basis function, the scale transformation is used in time and frequency domain respectively, and the data in time domain is smoothed and padded with zero. An adaptive algorithm to determine the order of Hermite function is also proposed. As a post-processed step, the transient data are smoothed by using GPOF to obtain a convergent result. The numerical example and the field measurement are presented to illustrate the application of this methodology. The method proposed enhances the ability of the simultaneous time and frequency extrapolation techniques.

关键词： Signal processing

来源：评论

学校读者我要写书评

暂无评论

Adaptive Galerkin approach of the indirect boundary element method for calculating 3D linear magnetostatic field

引用

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 2006年第1期26卷 96-100页

作者： Zou, Jun He, Jin-Liang Yu, Hai-Yu Teng, Wen-Rui State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing 100084 China Dept. of Electrical Engineering Henan University of Technology Zhengzhou 450042 China

The indirect boundary element method has some special advantages for the 3D linear magnetostatic field calculation by using the equivalent magnetic surface charge. In order to improve the accuracy of solutions and decrease the computational costs, an adaptive Galerkin approach to solve the magnetostatic integral equation is presented by using the h-type refinement technology. The basic idea of the proposed approach can be summarized as follows. The error of magnetic flux density is globally minimized in the Galerkin sense in the implementation, so the continuity error of magnetic flux density of each element can be served as a criterion to guide the adaptive refinement. The singularity of geometric corners and edges can be overcome due to the scheme of the discretization of the integral equation with Galerkin's approach. In addition, a local resolution technology is proposed, which leads to the minimal refined unknown. The numerical examples show the proposed method is efficient and accurate by comparison to the analytical solutions and the measured results.

关键词： Magnetic fields

来源：评论

学校读者我要写书评

暂无评论

Calculation on the thermal field of the water cooling stator of three-gorge hydro-generator

Calculation on the thermal field of the water cooling stator...

引用

ICEMS 2005: 8th International Conference on Electrical Machines nd systems

作者： Wang, H.Y. Su, P.S. Wang, X.H. Department of Electrical Engineering State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Tsinghua University Beijing 10084 China

ISBN: (纸本)7506274078

To simplify the calculation of winding bar temperature for the condition monitoring of the water cooling stator of Three-Gorge Hydro-Generator, this paper calculates three of two-dimension thermal fields. Using the three fields simulates the different section along the axial direction of the generator. The total amount of heat taken away by water can be calculated by weighting the result of three fields on the total axial length of them. Four groups of thermal-fields with different outlet-water temperature are calculated by using ANSYS multi-physical software. The calculation results of temperature of measurement-point between up-layer and down-layer bars in stator are partly supported by the measurement data. And the relatively error between the heat taken by cooling-water and the heat generated by the stator bar is always less than 5%.

关键词： Stators

来源：评论

学校读者我要写书评

暂无评论

Research on the prediction-model of the surface-temperature of large oil-immersed power transformer

Research on the prediction-model of the surface-temperature ...

引用

ICEMS 2005: 8th International Conference on Electrical Machines nd systems

ISBN: (纸本)7506274078

In order to detect the abnormal temperature of large oil-Immersed power transformer earlier, this paper presents a new prediction-model of surface-temperature for the transformer to predict the normal surf ace-temperature. And to compare the difference between the predicted value and the measured value can judge If the condition of the transformer Is fit to operate. The model parameters are estimated from the field data by using the Partial-Least-Square method, which overcomes the instability of results estimated by using the traditional Least-Square method. Furthermore, the appropriate amount of data for the parameter estimation was decided according to the principle of Heat Transfer and the characteristics of the predicted deviation, such as mean, variance and normal distribution. The prediction model is verified from the accuracy of results predicted with one year of field data.

关键词： Electric transformers

来源：评论

学校读者我要写书评

暂无评论

Optimized design of main protection configuration scheme for internal faults of shawan generator

Optimized design of main protection configuration scheme for...

引用

ICEMS 2005: 8th International Conference on Electrical Machines nd systems

作者： Sun, Yuguang Wang, Xiangheng Gui, Lin Wang, Weijian Department of Electrical Engineering State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Tsinghua University Beijing 100084 China

ISBN: (纸本)7506274078

In order to provide high-quality protection for large- and medium-sized generators, a new feasible method of designing main protection configuration scheme for internal faults of generators is desirable. Based on calculation of all the possible internal faults with the multi-loop method, the optimized design method is illustrated through Shawan generator in this paper. With this method, the optimal protection configuration scheme, composed of the split-phase transverse differential protection, two sets of incomplete longitudinal differential protection as well as one set of single element transverse differential protection, is determined for the internal faults of Shawan generator, which has two branches in each phase. The rate of operation and double-protection of the optimal scheme both reach the maximum. In addition to that, on all the possible phase-to-phase faults, at least two kinds of protection of the optimal scheme are sure to operate correctly. The optimized scheme excels the conventional one in protection performance index, which verifies the validity of the optimized method of designing main protection configuration scheme for generators.

关键词： Electric generators

来源：评论

学校读者我要写书评

暂无评论

Design and experiments of two glued axially-laminated synchronous reluctance permanent magnetic motors

Design and experiments of two glued axially-laminated synchr...

引用

Sixth International Conference on power Electronics and Drive systems, PEDS 2005

作者： Guo, Wei Zhao, Zhengmlng Department of Electrical Engineering Tsinghua University State Key Laboratory of Control and Simulation of Power System and Generation Equipment Beijing China

ISBN: (纸本)0780392965

Two axially-laminated Glued Axially-Laminated Synchronous Reluctance Permanent Magnetic (SR-PM) motors are designed and tested. Compared to general Axially-Laminated Synchronous Reluctance (SR) motors, the steel bracket is replaced with iron lamination for reduction of iron loss in rotor. The axially-laminated Iron and magnet are glued on the bracket with high strength cement with the help of special clamping device. Then the rotor Is grinded to the cylinder and a stainless steel rotor sleeve is added to enhance the strength. The design flow starts with initial sizes trade-off and static performance analysis followed by high speed performance validation and dynamic operation simulations. The electromagnetic parameters measurement, no-load and load test are carried out on test bed to verify the design. The comparison of these two sample motors are given for future design reference. It can be concluded that very poor max energy product PM material is not a good choice for application that requires high power density. © 2005 IEEE.

关键词： Reluctance motors

来源：评论

学校读者我要写书评

暂无评论

A computer control and monitoring system for high power converters

A computer control and monitoring system for high power conv...

引用

ICEMS 2005: 8th International Conference on Electrical Machines nd systems

作者： Rong, Yi Zhenming, Zhao Xiaoying, Sun Liqiang, Yuan Jue, Qian Department of Electrical Engineering State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua University Beijing 100086 China

ISBN: (纸本)7506274078

Computer control and monitoring system (CCMS) is quite important for high power converters (HPCs) operation. This paper presents a novel CCMS, which integrates a database management system (DBMS) into the monitoring software to get the beneficial features such as simple configuration and compact structure. In its communication system, an advanced optical fiber communication (OFC) technology is applied and priority-based communications is proposed to improve the reliability and the real time of the communications. Furthermore, a friendly standard Windows human-machine interface (HMI) is provided. The reliability and performance of the system are verified by system tests and practical operations.

关键词： power converters

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：