TiO2 thin films were prepared on soda lime glass, fused quartz and stainless steel substrates by liquid phase deposition (LPD) method from a (NH4)2TiF6 aqueous solution upon the addition of boric acid (H3BO3), and the...
详细信息
TiO2 thin films were prepared on soda lime glass, fused quartz and stainless steel substrates by liquid phase deposition (LPD) method from a (NH4)2TiF6 aqueous solution upon the addition of boric acid (H3BO3), and then calcined at 500°C for 2 h. The prepared films were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). It was found that the substrates obviously influenced the element composition and microstructure of TiO2 thin films. Except Ti, O and a small amount of F and N elements, which came from the precursor solution, some Si (or Fe) element in the thin films deposited on soda lime glass and quartz substrates (or on stainless steel substrate) was confirmed. The Si (or Fe) element in the thin films could be attributed to two sources. One was from the SiF 62- ions (or FeF62- ions) formed by a reaction between the treatment solution and soda lime glass or quartz (or stainless steel) substrates. The other was attributed to the diffusion of Si (or Fe) from the surface of substrates into the TiO2 thin films after calcination at 500°C. The Si (or Fe) element in the TiO2 thin films could behave as a dopant and resulted in the formation of composite SiO2/TiO2 (or Fe2O3/TiO2) thin films on the substrates.
Preparation of a modified (Pb,Ca)TiO3 with (Zn1/2W1.2) (Ni1/2Nb1/2) substitution in B-site had been studied. Adding suitable amounts of MnCO3 in this modified PbTiO3 piezoelectric ceramics, the material performances c...
详细信息
A new kind of sintering process, combined sintering process. i.e. vacuum sintering plus hot isolate pressure sintering (HIP), was introduced for producing ultrafine WC-10% Co (mass fraction. so as the follows) cemen...
详细信息
A new kind of sintering process, combined sintering process. i.e. vacuum sintering plus hot isolate pressure sintering (HIP), was introduced for producing ultrafine WC-10% Co (mass fraction. so as the follows) cemented carbides. The effects of some processing parameters on the microstructure and mechanical properties of the obtained cemented carbides were studied. The results show that the rapid shrinkage and the pronounced densification of tile cemented carbides took place during the vacuum sintering stage, which is intinaately correlated with the local liquid sintering occurred during this earl} sintering stage for the high surface activity of ultrafine WC-Co powder. The way of high pressure imposing. isothermal treatment cycle during *** sintering and HIP sintering stage directly influence the densitication of compacts and the mechanical properties of the produced WC-10%Co cemented carbides.
暂无评论