检索结果-内蒙古大学图书馆

4th IEEE International Conference on Digital Twins and Parallel Intelligence, DTPI 2024

作者： Liu, Yugang Luo, Chi Chen, Chen Wang, Zhu Liu, Ming Dongfang Boiler Co. Ltd Clean Combustion and Flue Gas Purification Key Laboratory of Sichuan Province Chengdu China Xi'an Jiaotong University Xi'an State Key Laboratory of Multiphase Flow in Power Engineering China

ISBN: (纸本)9798350349252

The high penetration of renewable energy introduces increased volatility into the power system, presenting more challenging peak shaving and frequency modulation missions for thermal power plants that serve as schedulable power sources within the system. Frequent load cycling place higher demands on the operation stability of core power plant equipment and introduce additional safety risks. As the core system of the power cycle, the operational reliability and energy efficiency of the feedwater pump system (FPS) are crucial. Therefore, this paper focuses on the core equipment and parameters of the FPS, developing a digital twin model based on mechanism modeling method and neural network data-driven modeling method. By comparing the mean absolute error, root mean square error, and coefficient of determination of simulation parameters of different modeling methods, digital twin parameters with higher simulation accuracy were obtained. Utilizing these predicted parameters, an FPS fault diagnosis model (FFDM) for the FPS was developed. By calculating comprehensive deviation degree and the contribution of each parameter, fault early warning and source tracing were achieved, providing guidance for the closed-loop control. © 2024 IEEE.

关键词： Feedwater pumps

来源：评论

学校读者我要写书评

暂无评论

Waste heat recovery in the coal-fired power generation integrated with post-combustion 3

Waste heat recovery in the coal-fired power generation integ...

引用

3rd International Conference on Electrical engineering and Mechatronics Technology, ICEEMT 2023

作者： Yang, Yali Wang, Guiwen Li, Yan Liu, Yongping Fu, Yue Liu, Ming Guoneng Jinjie Energy Co. Ltd Yulin China Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering Xi'an710049 China

ISBN: (纸本)9798350303698

Post combustion systems (PCS) are a viable technology option to reduce carbon dioxide in the electricity production. However, the energy-intensive of PCC precludes its wide scale application. As for the optimization of the post combustion system, there is an optimal inlet temperature of the stripper. By optimizing the parameter of the post combustion system, the energy consumption rate of the post combustion system decreased by 1.4 GJ/t CO2 under 100% THA compared to the original post combustion system. The needed heat by the stripper shows a fall with the decrease of the unit load ratio. However, the heat changes of the post combustion system decrease with the decrease of the unit load ratio under 90% absorption rate. The efficiency penalty can be as low as 4.1% through waste heat recovery. © 2023 IEEE.

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

Thermodynamic Analysis and Optimization of Nuclear Closed Air Brayton Cycle 1

引用

23rd Pacific Basin Nuclear Conference, PBNC 2022

作者： Fang, Huawei Yi, Jingwei Zhang, Xiaoyu Liang, Tiebo Qian, Yiran Tang, Xin Chen, Weixiong Key Laboratory of Nuclear Reactor System Design Technology Nuclear Power Institute of China Sichuan Chengdu China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Shaanxi Xi’an China

ISBN: (数字)9789811988998

ISBN: (纸本)9789811988981

In order to improve the flexibility and adaptability of micro nuclear power systems, air is considered as an optional working fluid of nuclear Brayton cycle. It has ability to avoid shortage of working fluid under extreme conditions, and ensure the system operating with tight supply. Compared with the traditional open cycles, the closed cycle has advantages of higher cycle efficiency, smaller equipment size and higher power density. Few of closed air power cycle in nuclear power system has been studied by now. In this paper, cycle parameters were analyzed and designed, and optimal cycle performance was compared between cycle constructions. Four closed air Brayton cycles are proposed and modeled in EBSILON 15.0, including simple regenerative cycle (SRC), intercooling regenerative cycle (IRC), reheat regenerative cycle (RRC) and intercooling-reheat regenerative cycle (IRRC). Thermodynamic analysis of the key parameters is conducted, including pressure ratio, turbine inlet temperature, compressor inlet temperature and pressure. In addition, the genetic algorithm (GA) is applied for multi-parameters optimization for the maximal cycle efficiency. Result shows that with the increase of pressure ratio, the efficiency of SRC increases firstly and then decreases. With the increase of turbine inlet temperature, the pressure ratio corresponding to the maximal cycle efficiency increases gradually. Specific work gradually increases with pressure ratio. In higher turbine inlet temperature, the rising velocity of specific work is faster. Cycle efficiency increases with compressor inlet pressure, and this trend tend to be slower in high pressure region. With the increasing of compressor inlet pressure, optimal pressure ratio decreases and finally approaches to 2.0. The cycle minimal cycle pressure was selected as 6 MPa. Maximal efficiency and corresponding pressure ratio increase with turbine inlet temperature increasing and decrease with compressor inlet temperature increasing. Co

关键词： Air

来源：评论

学校读者我要写书评

暂无评论

Angle Scattering Method for Soot Concentration Measurement under Ultra-Low Emissions Condition

引用

Energy engineering 2022年第2期119卷 511-522页

作者： Bin Yang Xingchen Zhu Jie Deng Xiaoxu Guo Jinke Han Xiaowei Liu School of Energy and Power Engineering Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power EngineeringUniversity of Shanghai for Science and TechnologyShanghai200093China State Key Laboratory of Coal Combustion Huazhong University of Science and TechnologyWuhan430074China

Aiming at the problem of soot concentration measurement under ultra-low emission conditions,a forward small angle soot concentration measurement method is *** a typical boiler emission of 0.1μm-3.0μm bimodal distribution soot as an object,the particle scatter simulation calculation under different parameters is carried out,and the influence of detection angle and particle size on the angular scatteringmeasurement of ultra-low emission soot is *** influence of detection angle and particle size on the angular scatteringmeasurement of ultra-lowemission soot is ***,thewavelength of incident light is 650 nm,and the forward detection angle parameter is 15◦for the design of forward small angle soot concentration measurement *** experimental system for measuring soot with standard concentration is *** of particle concentration measurement of 1.0μm and 3.0μm under ultra-low emission conditions are carried *** results show that the average deviation of soot concentration measurement is less than 0.10 mg/m3 under the condition of ultra-low emission by using 15◦of forward detection,which provides an effective way for monitoring ultra-low emission soot concentration in coal-fired power plants.

关键词： Emission monitoring ultra-low emission soot concentration angular scattering

来源：评论

学校读者我要写书评

暂无评论

Experimental and Numerical Investigations on Heat Transfer Characteristics of Supercritical Water in a Vertical Tube

SSRN

引用

SSRN 2024年

作者： Du, Xiaocheng An, Ning Wei, Ziyu Yang, Dong State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University China

Heat transfer performance of working medium is important for supercritical units. In this work, heat transfer experiments and simulations were carried out at 25 to 29.8 MPa. The impacts and influence mechanisms of operation parameters on heat transfer characteristics were analyzed. To describe the fluid heat storage capacity, a metric called cdv is proposed. The findings indicate that thermal conductivity, cdv, and flow turbulence intensity are the three types of factors influencing heat transfer characteristics. As mass flux rises, the radial flow turbulence intensity increases, leading to an improvement in heat transfer performance. The impact of heat flux is mainly showed in high enthalpy zone. Due to the reduction in radial thermal conductivity, heat transfer enhances as heat flux decreases. Large specific heat zone, where the thermophysical parameters vary quickly, are where the influence of pressure is most evident. Because of the high thermal conductivity and cdv, the heat transfer characteristics get better as pressure drops. Finally, typical heat transfer correlations were evaluated using experiment results. The Bishop, Mokry and Miropoiskii-Shitsman correlations exhibited relatively large errors, and the correlations proposed by Swenson and Jackson have a low error and are highly consistent with the experiment results. © 2024, The Authors. All rights reserved.

关键词： Heat flux

来源：评论

学校读者我要写书评

暂无评论

Evaporation and drying characteristics of the sessile ferrofluid droplet under a horizontal magnetic field

引用

Fundamental Research 2022年第2期2卷 222-229页

作者： Zhaonan Liu Jiandong Zhou Yang Li Xin Zhuo Xiujuan Shi Dengwei Jing State Key Laboratory of Multiphase Flow in Power Engineering and International Research Center for Renewable Energy X^an Jiaotong UniversityXi'an 710049China

In this study,the evaporation characteristics and drying patterns of various sessile ferrofluid droplets on certain substrate under horizontal magnetic fields of controlled intensities are *** effects of droplet concentration and magnetic field intensity on the duration of each evaporation stage and drying patterns of droplets have been systematically *** turned out that a plateau appears at the initial stage of evaporation in the absence of magnetic field and it was found that the plateau value is positively correlated with the concentration of ferrofluid *** the external magnetic field,the evaporation time of droplets decreases,the stage of contact line retreat extends,the stage of late pinning mode shortens,and the deposition area of ferrofluid droplet decreases compared to that of without magnetics *** deposition area increases gradually and becomes more uniform with the increase of magnetic *** decrease of friction force which is due to the decrease of the number of nanoparticles at the contact line under external magnetic field is the main reason for the observed *** found that the coffee ring and the uniform deposition inside the droplet will be destroyed when the magnetic field intensity is higher than a critical *** work has a significant reference value for the evaporation of sessile magnetic fluid droplets under the applied magnetic field,especially when the drying pattern needs to be precisely controlled,such as in spray or biomedicine.

关键词： Ferrofluid Droplet Drying pattern Evaporation characteristics Magnetic field

来源：评论

学校读者我要写书评

暂无评论

Comparison of Dynamical System Scaling and Hierarchical Two-Tiered Scaling applications with Definite Solution Analogy Theory to the passive residual heat removal system of Fluoride-Salt-cooled high-Temperature Advanced Reactor 20

Comparison of Dynamical System Scaling and Hierarchical Two-...

引用

20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2023

作者： Li, Xinyu Zhang, Dalin Zhou, Xingguang Lv, Xindi Jiang, Dianqiang Wu, Zhiyuan Li, Sijun Tian, Wenxi Qiu, Suizheng Su, G.H. State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an710049 China

ISBN: (纸本)9780894487934

The Passive Residual Heat Removal System (PRHRS) of Fluoride-Salt-cooled high-Temperature Advanced Reactor (FuSTAR) has already been designed and scaled by the Hierarchical Two-Tiered Scaling (H2TS).However, considering the difficulties to identify the distortion of the dynamic response, the Dynamical System Scaling(DSS) method was also adopted for comparison in this ***, based on the dimensionless governing equations without any common assumptions of the natural cycle process in PRHRS, the Definite Solution Analogy Theory (DSAT) was put forward in this study to calibrate dimensionless numbers based on differential *** the parameters of geometric and thermohydraulics were re-evaluated by the DSS method and compared with those from the H2TS *** results show that H2TS and DSS are equivalent in experimental design results under the constraint of *** H2TS method is better at accurately quantifying the deviation item by item, while the DSS method can find the most suitable experimental structure more quickly. © 2023 Proceedings of the 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2023. All rights reserved.

关键词： Hierarchical systems

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on Stable Jet Impact Process Under Simulated Pipeline Rupture 21

Experimental Study on Stable Jet Impact Process Under Simula...

引用

21st IEEE Student Conference on Research and Development, SCOReD 2023

作者： Tao, Zhang Qincheng, Bi Jinle, Zhao Teng, Wang Jingrong, Chen Fan, Feng Xi'an Jiaotong University State Key Lab Multiphase Flow Power Engn Shaanxi Xi'an China North China Electric Power University School of Energy Power and Mechanical Engineering Bao'ding Hebei China

ISBN: (纸本)9798350318821

In this study, an advanced experimental system was utilized that incorporated heating, jetting, recycling, and cooling capabilities to ensure the successful execution of stable jet impact experiment that simulating a pipeline complete rupture. High-temperature resistant tempered glass was employed in the experimental system to realize the visibility. During the experiment, 8mm pipes/nozzles of varying lengths were employed as the test sections, and jetting phenomena when the import status is single-phase cold water or two-phase mixture at 0-2MPa were obtained by high-resolution photos. Additionally, the shape of the jet cone and the impact force exerted on the target plate were meticulously analyzed after the working fluid under different state parameters jetting into an atmospheric pressure environment through pipes/nozzles. The research also focused on the variation trend in the magnitude of the jet-impact force, as a function of inlet pressure and temperature, target plate distances, and length-to-diameter ratios. The research findings revealed that cold water(below 100°C), sub-cooled water(above 100°C but not reaching saturation temperature), and two-phase steam-water mixture exhibited distinct jet cone shapes during the jetting process, resulting in varying distributions of the jet force. Furthermore, the distance from the spout to the target plate and the length-to-diameter ratio significantly influenced the magnitude of the jet impact force. © 2023 IEEE.

关键词： Pipelines

来源：评论

学校读者我要写书评

暂无评论

Application-oriented hydrolysis reaction system of solid-state hydrogen storage materials for high energy density target:A review

引用

Journal of Energy Chemistry 2022年第11期31卷 218-238,I0007页

作者： Jing Yao Zhen Wu Huan Wang Fusheng Yang Jianwei Ren Zaoxiao Zhang School of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’an 710049ShaanxiChina Department of Mechanical Engineering Science University of JohannesburgJohannesburg 2092South Africa State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049ShaanxiChina

Hydrogen storage and delivery technology is still a bottleneck in the hydrogen industry *** all kinds of hydrogen storage methods,light-weight solid-state hydrogen storage(LSHS)materials could become promising due to its intrinsic high hydrogen *** reaction of LSHS materials occurs at moderate conditions,indicating the potential for portable *** present,most of review work focuses on the improvement of material performance,especially the catalysts *** part is important,but the others,such as operation modes,are also vital to to make full use of material potential in the practical *** operation modes of hydrolysis reaction have an impact on hydrogen capacity to various *** example,hydrolysis in solution would decrease the hydrogen capacity of hydrogen generator to a low value due to the excessive water participating in the ***,application-oriented operation modes could become a key problem for hydrolysis reaction of LSHS *** this paper,the operation modes of hydrolysis reaction and their practical applications are mainly *** implements of each operation mode are discussed and compared in detail to determine the suitable one for practical applications with the requirement of high energy *** current challenges and future directions are also discussed.

关键词： Solid-state hydrogen storage High energy density Hydrogen generator Hydrolysis reaction Portable applications

来源：评论

学校读者我要写书评

暂无评论

Toward practical photoelectrochemical water splitting and CO_(2) reduction using earth-abundant materials

引用

Journal of Energy Chemistry 2021年第10期30卷 469-488,I0013页

作者： Yubin Chen Ya Liu Feng Wang Xiangjiu Guan Liejin Guo International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049ShaanxiChina

Photoelectrochemical(PEC)fuel generation from water splitting and CO_(2)reduction(CO_(2)R)utilizing solar energy holds immense potential to solve the current energy and environmental *** the past decades,numerous studies have been devoted to this fast-growing research field,and it is essential to develop efficient photoelectrodes with earth-abundant materials for the practical application of PEC systems.A thorough review of earth-abundant materials and associated devices for PEC fuel generation is beneficial to uncover the inherent obstacles and pave the way for future ***,we summarize the recent progress of earth-abundant light-absorbers and cocatalysts in the PEC *** unbiased configurations and scaling-up strategies of PEC devices using earth-abundant materials are examined.A comparison between PEC water splitting and CO_(2)R is carried out to promote better understanding of the design principles for practical materials and ***,the prospects on advanced materials,underlying mechanisms,and reaction systems of PEC water splitting and CO_(2)R are proposed.

关键词： Solar energy Photoelectrochemical technology Water splitting CO_(2)reduction Earth-abundant materials

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：