检索结果-内蒙古大学图书馆

On Accelerative Propagation of Premixed Hydrogen/Air Laminar and Turbulent Expanding Flames

学校读者我要写书评

暂无评论

SSRN 2022年

作者： Zhao, Haoran Wang, Jinhua Cai, Xiao Dai, Hongchao Liu, Xiao Huang, Zuohua State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong Universit Xi’an710049 China College of Power and Energy Engineering Harbin Engineering University Harbin150001 China

The accelerative propagation of laminar and turbulent premixed hydrogen/air flames are investigated using a constant volume combustion chamber. Turbulent burning velocity ( S T ) of hydrogen/air mixtures are determined in a wide range of conditions, more importantly the flame propagation dynamics and acceleration exponents are analyzed in detail. Results show that three distinct stages, namely quasi steady, transition acceleration and saturation acceleration stages are distinguished in laminar flame propagation process, and transient acceleration exponent ( a R ) increases in transition acceleration stage while nearly remains as a constant between 1.1~1.25 in saturation acceleration stage. Turbulent flame propagation follows a self-similar acceleration law, and transient acceleration exponent increases continuously as flame propagates outwardly. Furthermore, the empirical correlatio n is obtained to describe the development of turbulent flame acceleration with flame radius. Additionally, global acceleration exponents ( a ) of turbulent flames increase continuously with u ’ / S L and no significant trend variation occurs in different regimes. It appears that the accelerative propagation of turbulent expanding flames is mainly controlled by turbulence stretch, while the effect of flame intrinsic instability is nearly covered in current study. © 2022, The Authors. All rights reserved.

关键词： Acceleration

Experimental Study on Deliquification with Atomizing Nozzle in Gas Well

学校读者我要写书评

暂无评论

Experimental Study on Deliquification with Atomizing Nozzle ...

2020 International Conference on Green Energy, Environment and Sustainable Development, GEESD 2020

作者： Gao, Yutang Li, Xiaobai Chang, Peng Liu, Lei State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Shaanxi710049 China

Gas is a clean energy resource in comparison with oil and coal. Liquid-loading problem is frequently encountered in the process of gas production. It would directly cause the production of gas wells decreasing, even off production. A number of deliquification techniques have been suggested for solving this kind of problem, but the available techniques are not yet widely applicable. Based on the analysis, the method of deliquification with atomizing nozzle in gas wells was put forward. The test bench was designed for studying the atomization of nozzles and the liquid entrainment of gas flow. The size distribution of atomized droplets was measured by Malvern laser grain size analyzer. The Sauter mean diameters of atomized droplets were analysed under different two-phase flow conditions. The results indicate that the designed nozzles have good atomization performances and show potential application for reducing liquid loading in gas wells. © Published under licence by IOP Publishing Ltd.

关键词： Two phase flow

Experimental study on the contribution of included/excluded minerals to particulate formation during coal char combustion

学校读者我要写书评

暂无评论

Fuel 2023年第1期346卷

作者： Shang, Yimin Liu, Siqi Niu, Yanqing Zhu, Guangqing Cheng, Zening Hui, Shi'en State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi'an Jiaotong University Shaanxi710049 China China Nuclear Power Technology Research Institute Shenzhen518031 China Zhundong Energy Research Institute Xinjiang Tianchi Energy Co. Ltd. Xinjiang831100 China

The contributions of included and excluded minerals to particulate matter formation are quantified in this work. By devolatilization of three typical Chinese coals, three coal chars with low (LA), moderate (MA), and high ash (HA) content (with both included and excluded minerals) were prepared, from which three float coal chars with low (LA−), moderate (MA−), and high ash (HA−) content (without excluded minerals) were separated by density differentiation method. The coal chars before and after separation were burned in a drop-tube furnace at 1600 K, the results of three float coal chars can directly reveal the contribution of included minerals, and the comparison of two kinds of chars with and without excluded minerals would reveal the excluded mineral contribution to ash distribution. The size distributions of the combustion-generated ash particle were obtained from the combination of ELPI+ and laser particle-size analyzer. The fractions of included/excluded minerals were obtained from SEM images. The results from the combustion of the float chars indicate the physical transformation of included minerals, while the results from original coal chars involve the transformation of both included and excluded minerals. Results indicate that the distribution of ash particles from included minerals for HA− char possesses a single peak, while the ash distributions of MA− and LA− char show a bi-modal shape. The excluded minerals in LA and MA chars mainly contribute to the ash emissions with sizes larger than 80 μm. The contribution from excluded minerals reach 86% to the ash particles of 205 μm for HA char, 54% for MA char and 51% for LA char. The number fractions of included minerals continuously decrease with a transformation into excluded minerals during char dynamic combustion. © 2023 Elsevier Ltd

关键词： Minerals

金属原子诱导的微环境调控在聚合氮化碳光催化析氢中的研究

学校读者我要写书评

暂无评论

Science China Materials 2024年第6期67卷 1765-1779页

作者：赵大明杨雨骁 Vasileios Binas 沈少华 School of Advanced Energy Shenzhen Campus of Sun Yat-sen UniversityShenzhen 518107China International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China Institute of Electronic Structure and Laser(IESL) Vasilika VoutonHeraklion GR-71110Greece Physical Chemistry Laboratory Chemistry DepartmentAristotle University of ThessalonikiThessaloniki 54124Greece

开发高效稳定的半导体光催化剂对光催化技术迈向实际应用至关重要.聚合物氮化碳(CN)因其优异的物理化学性质而被视为最具发展前景的制氢光催化剂之一.在过去几十年中,从热力学或动力学角度开发的一系列改性策略已经显著提升了CN的光催... 详细信息

开发高效稳定的半导体光催化剂对光催化技术迈向实际应用至关重要.聚合物氮化碳(CN)因其优异的物理化学性质而被视为最具发展前景的制氢光催化剂之一.在过去几十年中,从热力学或动力学角度开发的一系列改性策略已经显著提升了CN的光催化制氢性能.近期,金属原子修饰策略为CN改性提供了一条新途径,这种策略可以精确调控CN的微环境.本文全面回顾了金属原子修饰的CN光催化剂在光催化分解水制氢领域的最新研究进展,包括金属单原子修饰的CN、金属双原子修饰的CN、金属单原子与团簇共修饰的CN,重点阐述了金属原子对提升光催化性能的关键作用.此外,本文还全面总结了发展先进的金属原子修饰的CN光催化剂所面临的挑战与机遇.

关键词： metal atom polymeric carbon nitride hydrogen evolution photocatalysis solar energy conversion

A Novel Water Content Sensor Design and its Application for In-Situ Water Content Measurement Inside the flow Channel of Pemfc

学校读者我要写书评

暂无评论

SSRN 2022年

作者： Zhang, Yan Wang, Weiding Liu, Yukai Su, Jinzhan International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering School of Energy & Power Engineering Xi’an Jiaotong University Xi’an710049 China

In-situ water content detection in proton exchange fuel cell (PEMFC) is of great importance to its water management. In this study, flexible thin film water content microsensor (WCMS) were fabricated and deployed for real-time measurement of water distribution inside the channel of proton exchange membrane fuel cells. The effect of inserting WCMS on the cell performance was confirmed to be negligible. Besides, three WCMS were used to monitor the variation of water distribution in the upstream, midstream and downstream of the flow channel, respectively. The experimental results show that the WCMS can efficiently detect the change of water content inside the fuel cell in real time. The co-occurrence phenomenon of water column clogging in the flow channel and degradation of cell performance were observed. This work provide a novel design of WCMS and its application on the water content distribution inside flow channel of fuel cells. © 2022, The Authors. All rights reserved.

关键词： Proton exchange membrane fuel cells (PEMFC)

Experimental Study on Electrocatalytic Reduction of CO2 to Methanol over Cu2O and Cu2O/ZnO films

学校读者我要写书评

暂无评论

Experimental Study on Electrocatalytic Reduction of CO2 to M...

International Conference on power engineering 2021, ICOPE 2021

作者： Zhang, Wenfei Zhou, Qulan Qi, Ji Li, Na State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China China Mobile System Integration Co. Ltd Beijing100052 China

The Cu2O film electrodes were prepared by solution immersion method, the ZnO/Cu2O film electrodes were prepared by electrodeposition method. Then the pure Cu2O film electrodes and ZnO/Cu2O film electrodes were used to reduce CO2 to CH3OH. The crystal structure, morphology, particle size and specific surface area of pure Cu2O films prepared under different immersion time and ZnO/Cu2O films prepared under different deposition time and Zn2+ concentration were analyzed by XRD, SEM, and BET. The electrolytic activity of the pure Cu2O film electrodes and ZnO/Cu2O film electrodes were studied. Under the same reaction conditions, the Cu2O film electrode with 2 h preparation time has the best electrolysis effect in the three groups of pure Cu2O electrode. The increase of reaction temperature can significantly promote the reduction of CO2 to CH3OH on Cu2O film electrodes. the ZnO/Cu2O film electrode with the Zn2+ concentration of 0.05 M and the deposition time of 30 min had the highest total CH3OH yields. This study highlights that the ZnO have a very good promotion of electrolytic CO2 reduction on Cu2O film. © 2021 The Japan Society of Mechanical Engineers.

关键词： Carbon dioxide

Mild Combustion of a Premixed Nh3/Air Jet Flame in Hot Coflow Versus its Ch4/Air Counterpart

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Li, Pengfei Wang, Guochang Liu, Xiangtao Shi, Guodong Cai, Xiao Liu, Zhaohui Mi, Jianchun State Key Laboratory of Coal Combustion School of Energy and Power Engineering Huazhong University of Science and Technology Wuhan430074 China College of Engineering Peking University Beijing100871 China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China Dalian Maritime University China

MILD combustion is very suitable for solving the problems of unstable flame and high NOx emission (ENOx ) for ammonia fuel, but the related studies are rare. This work numerically investigates the MILD combustion characteristics of a premixed NH3/air jet flame in hot coflow (JHC) under different jet equivalence ratio (ΦJ), coflow temperature (TC) and oxygen level (XO2,C). For comparison, the similar CH4/air MILD-JHC flames are also calculated. Results show that the NH3 flame generally has lower temperature rise and heat release as well as larger reaction zone than CH4. This may suggest that the former flame can develop to the MILD regime more easily. ENOx is two orders higher from the NH3 than CH4 flame at all TC and XO2,C for ΦJ 1, ENOx of the NH3 flame quickly drops to near zero, but ENH3 and EH2 are very high (~1000 ppm) and the combustion efficiency is low. Moreover, ENOx increases quickly (slowly) with XO2,C (TC) while ENH3 and EH2 are quite low at TC ≥ 1300 K and XO2,C ≥ 1% for the NH3 flame. ENOx mainly comes from NO but N2O is also important at low ΦJ and TC. Therefore, considering all ENOx , ENH3, EH2 and the burning efficiency, the optimal conditions for NH3 MILD combustion are ΦJ =1, TC ≥ 1500 K and XO2,C =1%-3%. In addition, compared to the conventional flame, the NH3 MILD combustion can reduce ENOx by 1-2 orders. © 2023, The Authors. All rights reserved.

关键词： Ammonia

Analysis of Different Control Strategies Considering Individual Regulation of Heat User

学校读者我要写书评

暂无评论

Analysis of Different Control Strategies Considering Individ...

Electrical engineering and Mechatronics Technology (ICEEMT), IEEE International Conference on

作者： Zhiwei Xun Huijie Wang Liyuan Wang Long Yang Yunfang Gao Ming Liu Guoneng Jinjie Energy Co. Ltd Yulin China Xi’an Jiaotong University Xi’an China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

In the process of outdoor temperature change, it is beneficial to improve the comfort of thermal users to formulate adjustment and control strategies according to the actual needs of each user. In this paper, different adjustment modes are established according to the thermal comfort of users, and the control strategies of rising and cooling within 0, 30 and 60 minutes are proposed, and the indoor temperature control effect and heating energy consumption of each adjustment mode under different control strategies are analyzed. The results show that: in different modes, when the rise and cooling time increase, compared with the design room temperature, the indoor temperature difference under the control mode is smaller, but the time needed to reach stability is longer. At the same time, the total heat load is unchanged, but the total pump work decreases.

关键词：

Uncertainty and Sensitivity Analysis of Containment Aerosol Removal Under Severe Accident

学校读者我要写书评

暂无评论

SSRN 2025年

作者： Ou, Pingwen Chen, Yongzheng Chen, Peng Ouyang, Yong Guo, Chao Su, Guanghui China Nuclear Power Technology Research Institute Co. Ltd. Shenzhen518000 China State Key Laboratory of Nuclear Power Safety Technology and Equipment China Nuclear Power Technology Research Institute Co. Ltd. Shenzhen518000 China School of Nuclear Science and Technology Xi'an Jiaotong University Shaanxi Xi’an710049 China State Key Laboratory of Multiphase Flow in Power Engineering China

This study focuses on the uncertainty and sensitivity analysis of containment aerosol removal under severe accident conditions using the severe accident integral code ASTEC, validated by experiments carried by CNPRI, and the coupled uncertainty and sensitivity tool SUNSET. A "separated" methodology is introduced, which distinguishes between thermal-hydraulic and aerosol boundary conditions to highlight the impact of containment aerosol mechanisms. Eleven uncertainty input parameters related are selected for uncertainty propagation and the Spearman correlation coefficient is utilized to describe sensitivity. The removal factor exhibits significant variation, with peaks due to temporary enhancement of diffusiophoresis deposition caused by corium relocation and subsequent steam generation. Uncertainty in the removal factor is substantial before aerosol release termination and narrows afterward. The gravitational settling and the diffusiophoresis deposition are the most important contributors with approximately 70% and 20% deposited aerosol mass, respectively. The initial mass medium diameter, the gravitational shape factor and the agglomeration shape factor are the most influential input parameters in aerosol removal, including in-containment deposition and environmental release, and they should be considered discreetly with conservatism in source term estimation and radioactive consequence evaluation in nuclear engineering. © 2025, The Authors. All rights reserved.

关键词： Sensitivity analysis