检索结果-内蒙古大学图书馆

ChemPhysMater 2025年第1期4卷 78-85页

作者： Longqi Zhu Runze Wang Chen Wang Shuhan Yang Haizhen Liu Bo Xing Honghui Cheng Kuikui Wang Institute of Materials for Energy and Environment Laboratory of New Fiber Materials and Modern TextileGrowing Basis for State Key LaboratoryCollege of Materials Science and EngineeringQingdao UniversityQingdao 266071China MOE Key Laboratory of New Processing Technology for Non-ferrous Metals and Materials Guangxi Key Laboratory of Processing for Non-ferrous Metals and Featured MaterialsGuangxi UniversityNanning 530004China National Engineering Laboratory of Circular Economy Sichuan University of Science and EngineeringZigong 643000China School of Mechanical Engineering Yangzhou UniversityYangzhou 225127China Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology Changzhou UniversityChangzhou 213164China

Metal-cation doping is a fundamental strategy for enhancing catalyst ***-doped Ni_(0.85)Se/NF(Fe-Ni_(0.85)Se/NF)nanoparticles were prepared at 80°C via Fe^(2+)etching *** addition of Fe altered the coordination environment of the Ni species along with the catalyst's morphology,creating additional active ***,the synergistic interaction between the bimetallic components augmented the built-in activity and accelerated reaction *** Fe-Ni_(0.85)Se/NF electrocatalysts demonstrated remarkable catalytic activity for the oxygen evolution reaction(OER),with an acceptable overpotential of 276 mV and a Tafel slope of 58.1 mV dec^(−1)at 100 mA cm^(−2).Moreover,they demonstrated exceptional *** situ Raman and X-ray photoelectron spectroscopy(XPS)analyses showed that the excellent OER performance stemmed from the reconstruction-induced hydroxyl *** study offers a novel approach for streamlining the synthesis procedures and reducing the experimental costs for developing high-efficiency electrocatalysts.

关键词： Doping Selenylation Hydrothermal reaction Oxygen evolution reaction Electrocatalysts

来源：评论

学校读者我要写书评

暂无评论

Niobium oxide/MXene heterostructure for simultaneous production of ammonia and energy via rechargeable Zn-N_(2)battery system

引用

Journal of Energy Chemistry 2025年第4期103卷 448-457页

作者： Xinyu Dai Wei Zhang Ying Sun Zhenyi Du Zhanliang Tao Jingang Wang Wenhui Fang Xuehan Xing Yang Chen Hui Li Hao Zheng Jieshan Qiu Tianyi Ma Institute of Clean Energy Chemistry Key Laboratory for Green Synthesis and Preparative Chemistry of Advanced Materials of Liaoning ProvinceCollege of ChemistryLiaoning UniversityShenyang 110036LiaoningChina State Key Laboratory of Clean and Efficient Coal Utilization Taiyuan University of TechnologyTaiyuan 030024ShanxiChina Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education) Renewable Energy Conversion and Storage CenterCollege of ChemistryNankai UniversityTianjin 300071China College of Science Liaoning Petrochemical UniversityFushun 113001LiaoningChina College of Chemical Engineering State Key Laboratory of Chemical Resource EngineeringBeijing University of Chemical TechnologyBeijing 100029China Centre for Atomaterials and Nanomanufacturing(CAN) School of ScienceRMIT UniversityMelbourne VIC 3000Australia ARC Industrial Transformation Research Hub for Intelligent Energy Efficiency in Future Protected Cropping(E2Crop) Melbourne VIC 3000Australia College of Chemical State Key Laboratory of Chemical Resource EngineeringBeijing University of Chemical TechnologyBeijing 100029China

Aqueous Zn-N_(2)batteries with unique configuration are of potential for simultaneous N_(2)electro reduction and electricity generation,in which the electrocatalysts are critical for improving the NH_(3)yield and the energy ***,a heterostructure Nb_(2)O_5/Nb_(2)CT_(x)with abundant exposed Nb active sites and tuned electron density has been synthesized by in situ formation and anchoring of Nb_(2)O_5 nanoparticles on the surface of Nb_(2)CT_(x)MXene,which shows an enhanced N_(2)adsorption/activation *** heterostructure Nb_(2)O_(5/)Nb_(2)CT_(x)was used as the cathode of Zn-N_(2)battery that can deliver a peak power density of 1.25 mW cm^(-2)in 1.0 M KOH and can continuously produce NH_(3)with a yield of3.62μg h^(-1)mg_(ca)^(t-1).The NH_(3)formed in the battery system can be easily collected as a net product without circulating the ***,the Nb_(2)O_(5/)Nb_(2)CT_(x)has a long durability,evidenced by 70 h of operation at-0.4 V *** hydrogen electrode,which is the highest among the MXene-based electrocatalysts reported thus *** work may provide a new methodology based on Zn-N_(2)battery for sustainable and large-scale NH_(3)production with minimal energy consumption.

关键词： NH_(3)production Zn-N_(2)battery N_(2)Electroreduction Nb_(2)O_5/Nb_(2)CT_(x)heterostructure

来源：评论

学校读者我要写书评

暂无评论

Influences of particle size and composition on the hydrolysis behavior of MgO·nAl2O3 spinel

引用

Ceramics International 2025年

作者： Cao, Mengying Tu, Guangsheng Huang, Qing Liao, Jiaxing Jing, Zhengyang Chen, Bowen Tu, Bingtian Wang, Hao Wang, Weimin Fu, Zhengyi State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei Wuhan430070 China Hubei Longzhong Laboratory Hubei Xiangyang441000 China

The hydrolysis characteristic of MgO·nAl2O3 powders poses significant challenges for fabricating large-sized and complex-shaped transparent ceramic components. In this work, the hydrolysis behavior of MgO·nAl2O3 powders with designed particle size and chemical composition was systematically investigated. The results ascertained that coarse MgAl2O4 powders synthesized at higher temperatures exhibited reduced surface-active sites, and alumina-rich spinel surfaces exposed decreased unsaturated Mg atoms that catalyze water dissociation. The OH− concentrations in MgAl2O4-coarse and MgO·1.8Al2O3 suspensions were 63 % and 32 % of that in MgAl2O4-fine one, respectively, indicating an effective inhibition of the hydrolysis reaction. Ultimately, the hydrolysis mechanism of MgO·nAl2O3 was elucidated, where the boehmite protective layer (∼15 nm) formed on the particle surface after hydrolysis. This study provides a fundamental understanding of the surface properties and hydrolysis behavior of MgO·nAl2O3, which is of great significance for the preparation of spinel transparent ceramics using aqueous gel-casting. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Surface reactions

来源：评论

学校读者我要写书评

暂无评论

Spatial confinement of free-standing graphene sponge enables excellent stability of conversion-type Fe_(2)O_(3)anode for sodium storage

引用

Chinese Chemical Letters 2025年第3期36卷 544-549页

作者： Jun Dong Senyuan Tan Sunbin Yang Yalong Jiang Ruxing Wang Jian Ao Zilun Chen Chaohai Zhang Qinyou An Xiaoxing Zhang Hubei Key Laboratory for High-efficiency Utilization of Solar Energy and Operation Control of Energy Storage System Hubei University of TechnologyWuhan 430068China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Nanjing University of Aeronautics and Astronautics Nanjing 210016China

Conversion-type anode materials are highly desirable for Na-ion batteries(NIBs)due to their high theoretical ***,the active materials undergo severe expansion and pulverization during the sodiation,resulting in inferior cycling ***,a self-supporting three-dimensional(3D)graphene sponge decorated with Fe_(2)O_(3)nanocubes(rGO@Fe_(2)O_(3))is ***,the 3D graphene sponge with resilience and high porosity benefits to accommodate the volume expansion of the Fe_(2)O_(3)nanocubes and facilitates the rapid electrons/ions transport,enabling spatial confinement to achieve outstanding ***,the free-standing rGO@Fe_(2)O_(3)can be directly used as an electrode without additional binders and conductive additives,which helps to obtain a higher energy *** on the total mass of the rGO@Fe_(2)O_(3)material,the rGO@Fe_(2)O_(3)anode presents a specific capacity of 859 mAh/g at 0.1 A/*** also delivers an impressive cycling performance(327 mAh/g after 2000 cycles at 1 A/g)and a superior rate capacity(162mAh/g at 20 A/g).The coin-type Na_(3)V_(2)(PO_(4))_(3)@C//rGO@Fe_(2)O_(3)NIB exhibits an energy density of 265.3Wh/*** unique 3D ionic/electronic conductive network may provide new strategies to design advanced conversion-type anode materials for high-performance NIBs.

关键词： Conversion-type anode Spatial confinement Fe_(2)O_(3) Graphene network Self-supporting Sodium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

materials and devices for high‐density,high‐throughput micro‐electrocorticography arrays

引用

Fundamental Research 2025年第1期5卷 17-28页

作者： Yang Xie Yanxiu Peng Jinhong Guo Muyang Liu Bozhen Zhang Lan Yin He Ding Xing Sheng Department of Electronic Engineering Beijing National Research Center for Information Science and TechnologyInstitute for Precision MedicineLaboratory of Flexible Electronics TechnologyIDG/McGovern Institute for Brain ResearchTsinghua UniversityBeijing 100084China Beijing Engineering Research Center of Mixed Reality and Advanced Display School of Optics and PhotonicsBeijing Institute of TechnologyBeijing 100081China School of Materials Science and Engineering The Key Laboratory of Advanced Materials of Ministry of EducationState Key Laboratory of New Ceramics and Fine ProcessingLaboratory of Flexible Electronics TechnologyTsinghua UniversityBeijing 100084China

The pursuit of precisely recording and localizing neural activities in brain cortical regions drives the development of advanced electrocorticography(ECoG)*** progress has led to the emergence of micro-ECoG(μECoG)devices with sub-millimeter *** review presents the current research status,development directions,potential innovations and applications of high-density,high-throughputμECoG ***,we summarize the challenges associated with accurately recording single or multiple neurons using existingμECoG devices,including passive multielectrode and active transistor ***,we focus on cutting-edge advancements in passiveμECoG devices by discussing the design principles and fabrication strategies to optimize three key parameters:impedance,mechanical flexibility,and ***,recent findings highlight the need for further research and development in active transistor arrays,including silicon,metal oxide,and solution-gated *** active transistor arrays have the potential to unlock the capabilities of high-density,high-throughputμECoG devices and overcome the limitations of passive multielectrode *** review explores the potential innovations and applications ofμECoG devices,showcasing their effectiveness for both brain science research and clinical applications.

关键词： Electrocorticography Micro-electrocorticography Flexible electronics Bioelectronics Neural electrode array

来源：评论

学校读者我要写书评

暂无评论

Research on the burst failure analysis method of type IV cylinders based on the fiber strength reduction effect

引用

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica 2025年第5期42卷 2567-2582页

作者： Li, Ruiqi Hu, Haixiao Li, Shuxin Chen, Hongda Cao, Dongfeng Liu, Hao Zheng, Kaidong Zhang, Yu Liu, Rui State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China National Energy Key Laboratory for New Hydrogen-ammonia Energy Technologies Foshan Xianhu Laboratory Foshan528200 China School of Science Wuhan University of Technology Wuhan430070 China School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China General Research and Development Institute China FAW Co. Changchun130000 China

Composite material hydrogen storage cylinders are the most effective solution for high-pressure gaseous hydrogen storage. The carbon fiber fully wrapped plastic liner cylinder (Type IV cylinder) is the most important potential in the development of hydrogen storage. Accurately predicting the burst pressure and failure mode of type IV cylinders is basement for the lightweight design of these cylinders. Current burst failure prediction methods are developed base on traditional laminated structural models, where the influence of fiber bundles cross undulation that occurs during the helical winding process are not considered. This paper comprehensively investigated the influence of fiber bundles cross undulation on the fiber strength by combining numerical and experimental approaches, and a failure prediction method which takes into account of the strength knock-down effect was developed for type IV cylinders. The burst pressures and failure locations of three different types of IV cylinders were predicted and compared with the ones that predicted by traditional method which does not consider the strength knock-down effect. The physical bursting experiments were conducted, and the results validate that the numerical analysis method considering the strength knock-down effect can give more accurate prediction of the failure location and reduce the prediction error of the bursting pressure, the maximum error is reduced from +15.42% to +6.07%. © 2025 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.

关键词： Convergence of numerical methods

来源：评论

学校读者我要写书评

暂无评论

Low sintering shrinkage porous ceramics: Principles, progress, and perspectives

引用

Journal of advanced Ceramics 2025年第2期14卷 1-36页

作者： Jie Xu Yueqi Shao Xiaoying Feng Xiaoyan Zhang Hao Li Jinlong Yang Feng Gao State Key Laboratory of Solidification Processing MIIT Key Laboratory of Radiation Detection Materials and DevicesSchool of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Institute for Advanced Materials and Technology University of Science and Technology BeijingBeijing 100083China State Key Lab of New Ceramics and Fine Processing School of Materials Science and EngineeringTsinghua UniversityBeijing 100084China

Porous ceramics are lightweight materials with diverse pore structures and are widely applied in areas such as thermal insulation, sound absorption, filtration, catalysis, and energy storage. However, excessive shrinkage during the sintering process of porous ceramics leads to cracking and deterioration, posing significant challenges for achieving complex shapes. Despite its importance, the field of low sintering shrinkage porous ceramics has not received sufficient attention. This review systematically discusses the principles and progress in the development of low sintering shrinkage porous ceramics. First, we introduce the characteristics of various preparation methods, including partial sintering, particle-stabilized foaming, gel-casting, foam-gelcasting, and additive manufacturing (AM). We then explain three primary principles of low sintering shrinkage from the perspectives of the volume effect and mass transfer processes. This review focuses on the properties and applications of typical low sintering shrinkage ceramics such as mullite and alumina, particularly their mechanical properties and thermal conductivity as thermal insulation and ceramic cores. Finally, we summarize the current state and present future perspectives on low sintering shrinkage porous ceramics.

关键词： porous ceramics low sintering shrinkage volume expansion mass transfer process pore structure properties

来源：评论

学校读者我要写书评

暂无评论

Crevice corrosion of reinforcing steel in carbonated simulated concrete pore solutions contaminated by chloride

引用

Journal of Iron and Steel Research International 2025年第1期32卷 293-311页

作者： Peng-peng Wu Yuan-pei Gong Shao-hua Zhang Yue-zhong Zhang Bao-sheng Liu Guang-ling Song College of Materials Science and Engineering Taiyuan University of Science and TechnologyTaiyuan030024ShanxiChina College of Chemical Engineering and Technology Taiyuan University of Science and TechnologyTaiyuan030024ShanxiChina Department of Ocean Science and Engineering Southern University of Science and TechnologyShenzhen518055GuangdongChina School of Mechanical and Mining Engineering Centre for Advanced Materials Processing and Manufacturing(AMPAM)The University of QueenslandSt LuciaQLD4072Australia State Key Laboratory of Physical Chemistry of Solid Surfaces Xiamen UniversityXiamen361005FujianChina

The crevice corrosion of the reinforcing steel in the carbonated simulated concrete pore solutions(SCPSs)containing 0.04 mol/L chloride was *** comparison,the steel without crevice covered on its surface was also *** showed that the crevice corrosion in the uncarbonated SCPS was not triggered and the steel remained passivity by suppressing the anodic dissolution in the crevice *** SCPS was carbonated to have pH values of 10.5 and 11.5,the crevice corrosion was easier to be activated than the widely reported pitting corrosion owing to the rapid oxygen depletion within the crevice,but the crevice corrosion damage might be alleviated to a certain extent due to the relative compact surface film formed inside the *** further carbonation led to the activation dissolution of both the crevice interior and exterior,causing the more serious corrosion *** process of the crevice corrosion was systematically analyzed by combining the electrochemical measurement results and Evens polarization diagram.

关键词： Crevice corrosion Reinforcing steel Carbonation Electrochemical test Rust Evens polarization diagram

来源：评论

学校读者我要写书评

暂无评论

Photocatalytic water splitting versus H_(2) generation coupled with organic synthesis:A large critical review

引用

Chinese Journal of Catalysis 2025年第3期70卷 44-114页

作者： Oleksandr Savateev Jingru Zhuang Sijie Wan Chunshan Song Shaowen Cao Junwang Tang Department of Chemistry The Chinese University of Hong KongShatinNew TerritoriesHong KongChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina Industrial Catalysis Center Department of Chemical EngineeringTsinghua UniversityBeijing 100084China

Photocatalytic water splitting using natural solar light is considered as a sustainable approach to generate H_(2) and O_(2).While H_(2) has high market value,the by-product of water splitting,oxygen,is less *** make H_(2) produced by means of photocatalysis more economically competitive to that generated from methane,its generation is studied together with synthesis of organic compounds that have higher market *** review summarizes and analyzes critically dehydrogenation reactions that were developed since *** dehydrogenation reactions are classified and the results are collected in the online *** of homogeneous and heterogenous photocatalysts in dehydrogenation reactions,such as yield rates of organic products on analytical and preparative scales,and quantum efficiencies are *** limitations of the existing methods and photocatalytic systems are identified and directions for the future developments are outlined.

关键词： Acceptorless dehydrogenation Photocatalysis Photoredox catalysis Hydrogen Organic synthesis

来源：评论

学校读者我要写书评

暂无评论

Trace of Atomically Dispersed Pd Enables Unprecedented Butadiene Semihydrogenation Performance Over Copper Catalyst

引用

ACS Catalysis 2025年第5期15卷 3810-3822页

作者： Zhao Wang Hao Yuan Jian Tao Shu-Lin Liu Ying Hong Zhi-Yi Hu Jian Zhang Bao-Lian Su The State Key Laboratory of Advanced Technology for Material Synthesis and Processing Wuhan University of Technology Wuhan Hubei 430070 P. R. China State Key Laboratory of Solidification Processing School of Materials Science and Engineering Northwestern Polytechnical University Xi’an Shaanxi 710000 P. R. China The State Key Laboratory of Advanced Technology for Material Synthesis and Processing Wuhan University of Technology Wuhan Hubei 430070 P. R. China；Laboratory of Inorganic Materials Chemistry (CMI) University of Namur 61 rue de Bruxelles Namur B-5000 Belgium

Semihydrogenation plays a key role in industrial hydrorefining of light alkenes, with a market above 400 billion by 2027. The high cost of commercial palladium-based catalysts strongly calls for innovation but with great challenges. Herein, copper nanoparticles decorated with a minimized ppm of Pd are developed through a chemical plating process to integrate the catalytic advantages of copper and palladium for achieving maximized catalysis in the semihydrogenation of a fatal impurity of butadiene in alkene feedstocks. The developed Pd–Cu catalyst (i.e., 114 ppm of Pd in Pd0.0033Cu1/TiO2) exhibits an unprecedented catalytic performance superior to commercial Pd/Al2O3, with 100% butene selectivity above 90% of butadiene conversion over 130 h on stream at 90 °C. Further exploration reveals that the atomically dispersed Pd on Cu nanoparticles, obtained at ultralow ppm levels of Pd loading, induces a hidden but critical H2trap, which concentrates H2on the Pd site for further H2dissociation that offers intermediate hydrogen atoms to the tandem butadiene semihydrogenation over the third layer of Cu atoms neighboring Pd through hydrogen spillover. Moreover, a threshold on Pd density was identified at Pd/Cu surficial atomic ratio of 1/138 (i.e., Pd0.0033Cu1/TiO2) for maximizing butadiene semihydrogenation performance, based on an extreme collaboration between Pd for H2dissociation and Cu for butadiene hydrogenation. This work provides important guidance for developing noble metal-saving catalysts in industrial applications.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：