检索结果-内蒙古大学图书馆

Actuating mechanism and design of a T-type linear ultrasonic motor

Journal of Harbin Institute of Technology(New Series) 2011年第2期18卷 43-46页

作者：刘英想刘军考陈维山石胜君 State Key Laboratory of Robotics and System Harbin Institute of Technology

To take advantage of merits of higher output-power and efficiency of bolt-clamped transducer,a T-type linear ultrasonic motor was proposed in this *** proposed motor contained a horizontal transducer and a vertical *** horizontal transducer included two exponential shape horns,and the vertical transducer contained one exponential shape *** the horns intersected at tip ends where a driving foot was *** longitudinal vibrations of transducers were excited by the stretching vibration of PZT *** vibrations were superimposed in the motor and generated elliptical trajectory at the driving *** actuating mechanism of the proposed motor was *** two working modals of the motor were gained with *** resonant frequencies of two working modals were degenerated by adjusting the structural *** motion trajectory of nodes on the driving foot was gained by transient *** vibration amplitude of node on the driving foot indicates that the proposed motor has potential good output *** results verify the feasibility of the proposed design and provide instructions for the development of the new ultrasonic motor.

关键词： ultrasonic motor linear T-type longitudinal transducer FEM

来源：评论

学校读者我要写书评

暂无评论

A ring type standing wave ultrasonic motor using cantilever type longitudinal transducers

引用

Journal of Harbin Institute of Technology(New Series) 2011年第1期18卷 52-56页

作者：刘英想刘军考陈维山石胜君 State Key Laboratory of Robotics and System Harbin Institute of Technology

The disadvantages of classic ring type ultrasonic motor were *** obtain large mechanical output power,a ring type standing wave ultrasonic motor using cantilever type longitudinal transducers was *** are four pairs of cantilevers on one side of the ring,and four PZT ceramics are set between each pair of cantilevers.A screw fastened the PZT ceramics and cantilevers together to form a longitudinal *** bending vibration mode of the ring is excited by the stretching vibration of the PZT ***,linear simple harmonic motions are achieved at the particle on the *** the driving force is the frictional force between rotor and *** working principle of the proposed motor was *** ring and the longitudinal transducer were designed with *** sensitive parameters of resonant frequency of the transducer and ring could be gained with modal *** longitudinal vibration modal of transducer and bending vibration modal of ring were degenerated,and the motion trajectories of nodes on the teeth were *** results of this paper could guide the development of this new type of motor.

关键词： ultrasonic motor standing wave ring type vibration characteristic FEM

来源：评论

学校读者我要写书评

暂无评论

On set-point tracking control of dexterous robot hand

引用

Journal of Harbin Institute of Technology(New Series) 2011年第5期18卷 61-64页

作者：姜力潘军 State Key Laboratory of Robotics and System Harbin Institute of Technology

A model-free set-point tracking control approach of multi-fingered robot hand is *** set-point tracking controller,which has the structural form of PD controller,is composed with a combination of feedforward term,feedback term and saturation control *** controller does not require the explicit use of dynamic modeling *** performed on the HIT/DLR hand demonstrate the effectiveness of the proposed approach in performance improvement and real-time application.

关键词： tracking control robot hand kinematics

来源：评论

学校读者我要写书评

暂无评论

A novel 5-DOF exoskeletal rehabilitation robot system for upper limbs

引用

High Technology Letters 2009年第3期15卷 245-249页

作者：李庆玲 State Key Laboratory of Robotics and System Harbin Institute of Technology

A novel 5-DOF exoskeletal rehabilitation robot for upper limbs of hemiplegic patients caused by stroke is proposed in this paper. Its hardware structure is introduced and the control methods are ana- lyzed. To implement intelligent and interactive rehabilitation exercises, motion intention of patients＇ up- per limb is introduced into control methods of rehabilitation exercises. In passive motions, according to the character of unilateral impaired, multi-channels surface electromyogram （sEMG） signals of patients＇ healthy arm muscles are acquired and analyzed to recognize the upper limb motions, then drive the robot and assist paralysis ann＇s rehabilitation exercises. In active-resistant motions, because patients are re- covered with some muscle forces and active motion ability after a rehabilitation period, the terminal force loaded on the robot by an impaired arm are estimated with multi-channel joint torque sensors, according to which, the terminal velocity of the robot is controlled to drive the joint motions with a damp controller.

关键词： rehabilitation robot surface electromyogram （sEMG） passive motions active-resis- tant motions

来源：评论

学校读者我要写书评

暂无评论

Service Robot Localization Based on Global Vision and Stereo Vision

引用

Journal of Donghua University(English Edition) 2012年第3期29卷 197-202页

作者：于清晓闫维新付庄赵言正 State Key Laboratory of Mechanical System and Vibration Shanghai Jiaotong University State Key Laboratory of Robotics and System Harbin Institute of Technology

To satisfy different positioning accuracy demand in the movement of the service robot, a hierarchical localization method based on vision was proposed considering the positioning cost and computational efficiency. The hierarchical positioning method could be divided into two parts: the localization method based on global vision and the localization method based on binocular vision. The global vision-based localization method was applied to calculate the initial coordinates of the robot and realize real-time rough positioning with the dead-reckoning method in the first stage. In the last stage, the binocular vision-based localization method was adopted to obtain higher positioning accuracy to make sure that the service robot can successfully grab the object. Experiments indicate that the proposed algorithm can accurately evaluate the positioning performance, obtain up to ±2 cm positioning accuracy, and absolutely meet the positioning requirements of the indoor service robot.

关键词： service robot hierarchical positioning binocular vision localization

来源：评论

学校读者我要写书评

暂无评论

Minimizing Data Collection Latency for Coexisting Time-Critical Wireless Networks with Tree Topologies

引用

IEEE Transactions on Network and Service Management 2025年

作者： Zhang, Jialin Liang, Wei Yang, Bo Shi, Huaguang Liang, Ying-Chang Chinese Academy of Sciences State Key Laboratory of Robotics Shenyang Institute of Automation Shenyang110016 China Chinese Academy of Sciences Key Laboratory of Networked Control System Shenyang Institute of Automation Shenyang110016 China Northwest A and F University College of Information Engineering Yangling712100 China Henan University School of Artificial Intelligence Zhengzhou450046 China University of Electronic Science and Technology of China Center for Intelligent Networking and Communications Chengdu611731 China

Time-Critical Wireless Network (TCWN) is a promising communication technology that can satisfy the low latency, high reliability, and deterministic requirements of mission-critical applications. Multiple TCWNs required by various applications inevitably coexist with each other. Most existing works aim to achieve acceptable latency or consider the simplest topology (i.e., line topology). As latency requirements become more stringent, exploring the minimum data collection latency becomes an interesting problem. In this paper, the coexisting system consists of multiple tree-topology-based TCWNs. We first establish a conversion framework to convert an arbitrary tree topology into multiple analogous line topologies to reduce the analysis complexity. We then propose a Time-Critical wireless network Scheduling (TCS) algorithm to minimize the data collection latency of coexisting TCWNs. The TCS algorithm consists of two phases. In the internetwork scheduling phase, we strictly derive a general expression to characterize the practical network requirements. In the intranetwork scheduling phase, we design two levels of priority assignment algorithms to accurately characterize the critical states and resource requirements of different nodes. We conduct extensive simulations to verify the effectiveness of the TCS algorithm. The evaluation results show that the TCS algorithm can achieve minimum data collection latency in more than 99.956% cases, and the maximum difference compared to the optimal value is one time slot. © 2004-2012 IEEE.

关键词： Scheduling algorithms

来源：评论

学校读者我要写书评

暂无评论

Error aware multiple vertical planes based visual localization for mobile robots in urban environments

引用

Science China(Information Sciences) 2015年第3期58卷 159-172页

作者： LI HaiFeng WANG HongPeng LIU JingTai College of Computer Science and Technology Civil Aviation University of China Institute of Robotics and Automatic Information System Nankai University State Key Laboratory of Robotics

A novel error-aware visual localization method is proposed that utilizes vertical planes,such as vertical building facades in urban areas as *** planes,reconstructed from coplanar vertical lines,are robust high-level features if compared with point features or line ***,the error models of vertical lines and vertical planes are built,where maximum likelihood estimation(MLE)is employed to estimate all vertical planes from coplanar vertical ***,the closed-form representation of camera location error variance is ***,the minimum variance camera pose estimation is formulated into a convex optimization problem,and the weight for each vertical plane is obtained by solving this well-studied *** are carried out and the results show that the proposed localization method has an accuracy of about 2 meters,at par with commercial GPS operating in open environments.

关键词： visual localization multiple vertical planes error aware convex optimization satellite images urban environment mobile robot

来源：评论

学校读者我要写书评

暂无评论

Multi-sensor control for precise assembly of optical components

引用

Chinese Journal of Aeronautics 2014年第3期27卷 613-621页

作者： Ma Li Rong Weibin Sun Lining School of Mechatronic Engineering and Automation Shanghai University State Key Laboratory of Robotics and System Harbin Institute of Technology

In order to perform an optical assembly accurately, a multi-sensor control strategy is developed which includes an attitude measurement system, a vision system, a loss measurement system and a force sensor. A 3-DOF attitude measuring method using linear variable differential transformers （LVDT） is designed to adjust the relation of position and attitude between the spher- ical mirror and the resonator. A micro vision feedback system is set up to extract the light beam and the diaphragm, which can achieve the coarse positioning of the spherical mirror in the optical assembly process. A rapid self-correlation method is presented to analyze the spectrum signal for the fine positioning. In order to prevent the damage of the optical components and realize sealing of the resonator, a hybrid force-position control is constructed to control the contact force of the optical components. The experimental results show that the proposed multi-sensor control strategy succeeds in accomplishing the precise assembly of the optical components, which consists of parallel adjustment, macro coarse adjustment, macro approach, micro fine adjustment, micro approach and optical contact. Therefore, the results validate the multi-sensor control strategy.

关键词： Assembly Attitude measurement Force control Multi-sensor Vision

来源：评论

学校读者我要写书评

暂无评论

CPG Control for Biped Hopping Robot in Unpredictable Environment

引用

Journal of Bionic Engineering 2012年第1期9卷 29-38页

作者： Tingting Wang Wei Guo Mantian Li Fusheng Zha Lining Sun State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150080P.R.China

A CPG control mechanism is proposed for hopping motion control of biped robot in unpredictable environment. Based on analysis of robot motion and biological observation of animal＇s control mechanism, the motion control task is divided into two simple parts： motion sequence control and output force control. Inspired by a two-level CPG model, a two-level CPG control mechanism is constructed to coordinate the drivers of robot joint, while various feedback information are introduced into the control mechanism. Interneurons within the control mechanism are modeled to generate motion rhythm and pattern promptly for motion sequence control; motoneurons are modeled to control output forces of joint drivers in real time according to feedbacks. The control system can perceive changes caused by unknown perturbations and environment changes according to feedback information, and adapt to unpredictable environment by adjusting outputs of neurons. The control mechanism is applied to a biped hopping robot in unpredictable environment on simulation platform, and stable adaptive motions are obtained.

关键词： biped robot unpredictable environment hopping motion control bionic control CPG

来源：评论

学校读者我要写书评

暂无评论

Approximate Perturbation Stance Map of the SLIP Runner and Application to Locomotion Control

引用

Journal of Bionic Engineering 2012年第4期9卷 411-422页

作者： Haitao Yu Mantian Li Pengfei Wang Hegao Cai State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150080P.R.China

This paper presents a novel method of perturbation to obtain the analytic approximate solution to the Spring-Loaded Inverted Pendulum （SLIP） dynamics in stance phase with considering the effect of gravity. This perturbation solution achieves higher accuracy in predicting the apex state variables than the typical existing analytic approximations. Particularly, our solution is validated for non-symmetric trajectory of hopping in a large angle range. Furthermore, the stance controller of the SLIP runner is developed to regulate the apex state based on the approximate apex return map. To compensate the energy variation between the current and desired apex states, a stiffness adjustment of the leg spring in stance phase is presented. The deadbeat controller of the angle of attack is designed to track the regulated apex height and velocity. The simulation demonstrates that the SLIP runner applying the proposed stance controller reveals higher tracking accuracy and more rapidly converges to the regulated apex state.

关键词： legged locomotion spring-loaded inverted pendulum perturbation apex return map stiffness adjustment

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：