检索结果-内蒙古大学图书馆

International Conference on systems and Informatics (ICSAI)

作者： Jiaye Lin Yanjie Liu State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China

ISBN: (纸本)9781665474498

Compared to the vision-based approach, LiDAR-based SLAM has shown a great advantage in depicting geometric characteristics but still suffers from accumulated localization errors during long-term operation in large-scale scenarios. Introducing semantic information to the current system helps to discover higher-level features and establish a stronger association of features in different frames. In this paper, we utilize semantic information to present an integral LiDAR odometry that combines adaptive downsampling feature with label-specified registration to boost the performance of odometry estimation, together with Scan Context as the loop closure module to constrain the amplification of cumulative errors. Experiments are conducted based on the well-known KITTI dataset, which reveals that the proposed framework achieves higher accuracy with an average RTE of 0.97% in real-time and shows great robustness toward various scenarios.

关键词： Location awareness Technological innovation Laser radar Simultaneous localization and mapping Motion estimation Semantics Urban areas

来源：评论

学校读者我要写书评

暂无评论

LQR-based Ground Resonance Suppression of Helicopter with Adaptive Landing Gear*

LQR-based Ground Resonance Suppression of Helicopter with Ad...

引用

IEEE International Conference on robotics and Biomimetics

作者： Zhen Yan Haitao Yu Jifeng Xia Baolin Tian Haibo Gao State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China

ISBN: (纸本)9781665481106

Ground resonance (GR) is a potentially destructive mechanical instability involving the coupling of the regressive rotor mode to the fuselage motion. Vibration can be disastrous if measures are not taken in time to mitigate vibrations. This paper presents a study on the use of adaptive landing gear to eliminate GR in helicopters. A GR model considering adaptive landing gear is established, and the dynamic characteristics of the system are analyzed. In this paper, the Linear Quadratic Regulator (LQR) controller is applied to suppress the GR. The setting of the weighting matrix coefficients directly determines the effect of the control system. Therefore, a design method of LQR weighting matrix based on multi-objective genetic algorithm is proposed, which enables the control system to meet multiple performance indicators concurrently. Numerical simulations of GR suppression were performed for the rotor speed range where GR is most likely to occur. The results show that even if the rotor system is not equipped with any dampers, the suppression of helicopter GR can be achieved by using the control strategy proposed in this paper to control the adaptive landing gear. Therefore, the application of adaptive leg landing gear to helicopters can provide some ideas to eliminate GR.

关键词： Vibrations Legged locomotion Adaptive systems Gears Helicopters Rotors Vibration measurement

来源：评论

学校读者我要写书评

暂无评论

The controller architecture of dexterous hand with switchable coupling mechanism*

The controller architecture of dexterous hand with switchabl...

引用

IEEE International Conference on robotics and Biomimetics

作者： Ziqi Liu Li Jiang Wangyang Li Ming Cheng Xiaoqiao Wu State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China

ISBN: (纸本)9781665481106

This work investigates the design of the sensor system and control system for the coupled adaptive multi-fingered dexterous hand with actively switchable modalities. Considering the specific mechanical structure characteristics of the dexterous hand, a master-slave distributed control system design approach is adopted to integrate the sensor system and control system inside the finger, which completes the mechatronic integration of the whole hand. It can realize the modularity at the finger level and simplify the system complexity. This paper also introduces a fuzzy adaptive PID control method and develops the control strategy in active switchable mode. The experimental results show that the controller architecture can adapt to the changes in the institutional characteristics of the system when the finger switches between coupled and coupled adaptive states. It can complete the high-precision tracking of the target trajectory, achieve accurate position control, and have superior real-time performance.

关键词： Adaptive systems Target tracking Position control Switches Control systems Sensor systems Real-time systems

来源：评论

学校读者我要写书评

暂无评论

A novel design of force-feedback master manipulator for remote ultrasound scanning

A novel design of force-feedback master manipulator for remo...

引用

IEEE International Conference on robotics and Biomimetics

作者： ChangLe Li ChenTao Zhang Chuan You Yu LeiFeng Zhang GangFeng Liu Jie Zhao State Key Laboratory of Robotics and System Harbin Institute of Technology HeiLongJiang China

ISBN: (纸本)9781665481106

This paper presents a novel six-degree-of-freedom force feedback master manipulator for remote ultrasound scanning. Firstly, a new configuration based on a planar five-link mechanism is proposed, taking into account the practical needs of medical ultrasound scanning. This configuration has two operating modes and can provide three degrees of force feedback. Secondly, a hybrid force/position master-slave control system based on the kinetic model force feedback method is built, which can realize incremental master-slave control, variable proportional control, force feedback, and other functions. Finally, the positional accuracy, gravity balance effect, and force feedback performance of this master manipulator are verified through experiments. Experiments show that the average position error of this novel force feedback master manipulator is 1.18 mm, the average attitude error expressed in terms of Euler angles is 0.83°, and the maximum feedback force that can be provided is 12.1 N, which satisfies the requirements of ultrasonic scanning.

关键词： Ultrasonic imaging Tracking Proportional control Machine vision Force feedback Manipulators Main-secondary

来源：评论

学校读者我要写书评

暂无评论

A High-Speed Centerline Extraction Method for Multiple Laser Stripe based on Hessian Matrix

引用

Procedia Computer Science 2024年 250卷 235-243页

作者： Juntian Shi Weichao Guo Xinjun Sheng State Key Laboratory of Mechanical System and Vibration School of Mechanical Engineering Shanghai Jiao Tong University Shanghai 200240 China Meta Robotics Institute Shanghai Jiao Tong University Shanghai 200240 China

Laser centerline extraction is a critical step in the machine vision-aided measurement process, especially in the field of aerospace drilling and riveting. We propose a novel and efficient algorithm for the extraction of multiple laser centerlines, which consists of three major parts: laser linewidth estimation, ROI (Region of Interest) extraction, and precise positioning. In the linewidth estimation part, a method based on second-order moment is used to estimate the linewidth, and the scanning frame to linewidth ratio is adopted as the convergence condition to achieve a stable estimation result. In the ROI extraction part, we use a scanning frame to perform raster scanning on the entire image, and calculate the feature function threshold based on the sampling and grayscale volume method to complete ROI extraction. In the precise positioning part, we employ an improved method based on the Hessian matrix to reduce computation time, and use a λ filtering method to eliminate noise. Finally, the K-means method is used to classify the center points belonging to different laser centerlines, and RANSAC is utilized to perform line fitting. The final results demonstrate that the proposed algorithm has certain improvements in accuracy and also exhibits high computational efficiency.

关键词： Manufacturing Laser centerline extraction Hessian matrix

来源：评论

学校读者我要写书评

暂无评论

Speed Fluctuation Suppression of Current Scaling Errors Based on Improved Iterative Learning Control Method

Speed Fluctuation Suppression of Current Scaling Errors Base...

引用

International Conference on Electrical Machines and systems (ICEMS)

作者： Haoyi Mu Guodong Yu Shaobin Li Pengcheng Zhu Yongxiang Xu School of Electrical Engineering and Automation Harbin Institute of Technology Harbin China State Key Laboratory of Robotics and System Harbin China

In recent years, there has been a growing demand for high-precision speed control of permanent magnet synchronous motor (PMSM), drawing significant attention to the issue of inherent current measurement errors in drive control. This paper presents a novel approach to mitigate periodic speed fluctuations using an expert system-based iterative learning control (ILC) method. The proposed method employs an expert system to dynamically adjust the weight values of the memory factor during online updates. This ensures the calculated relaxation factor optimally suppresses speed fluctuations across all operating conditions. Furthermore, the stability and parameter tuning aspects are analyzed from the perspective of transfer functions, and the feasibility of the proposed method is demonstrated through simulation.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Design of a Flexible Capture Mechanism Inspired by Sea Anemone for Non-cooperative Targets

引用

Chinese Journal of Mechanical Engineering 2021年第4期34卷 236-248页

作者： Jiankun Yang Chengwei Ren Chenghao Yang Youyu Wang Shumin Wan Rongjie Kang Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education Tianjin UniversityTianjin 300350China State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110169China Beijing Institute of Spacecraft System Engineering CAST Beijing 100094China

Robotic grippers have been used in industry as end-effectors but are usually limited to operations in pre-defined ***,few devices can capture irregularly shaped dynamic targets in space,underwater and other unstructured *** this paper,a novel continuum arm group mechanism inspired by the morphology and motions of sea anemones is *** is able to dissipate and absorb the kinetic energy of a fast moving target in omni-direction and utilize multiple arms to wrap and lock the target without accurate positioning ***-driven actuation systems are implemented in the individual continuum arms,achieving both bending motion and stiffness *** finite element method,the influence of different configurations of the continuum arm group on the capture performance is analyzed.A robotic prototype is constructed and tested,showing the presented arm group mechanism has high adaptability to capture targets with different sizes,shapes,and incident angles.

关键词： Non-cooperative targets Continuum arm group Wire-driven mechanism

来源：评论

学校读者我要写书评

暂无评论

Prototype Design and Efficiency Analysis of a Novel Robot Drive Based on 3K-H-V Topology

Prototype Design and Efficiency Analysis of a Novel Robot Dr...

引用

IEEE International Conference on robotics and Biomimetics

作者： Le Qi Dapeng Yang Baoshi Cao Zhiqi Li Yikun Gu Zongwu Xie Hong Liu State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China

ISBN: (纸本)9781665481106

Robot actuators directly affect the performance of robots, and robot drives directly affect the performance of robot actuators. With the development of robotics, robots have put higher requirements on robot drives, such as high stiffness, high accuracy, high loading, high efficiency, low backlash, compact size, and hollow structure. In order to meet the demand development of robot actuators, this research base proposes a new robot drive based on 3K-H-V topology using involute and cycloidal gear shapes, planetary cycloidal drive, from the perspective of drive topology and through the design idea of decoupling. In this study, the reduction ratio and the efficiency model of the 3K-H-V topology were analyzed, and a prototype planetary cycloidal actuator was designed. The feasibility of the drive is initially verified by experimentally concluding that the PCA has a hollow structure, compact size, and high torque density (69 Nm/kg).

关键词： Actuators Torque Shape Gears Biomimetics Loading Prototypes

来源：评论

学校读者我要写书评

暂无评论

A novel piezoelectric actuated micro-tweezer with force sensing for optical fiber manipulation

A novel piezoelectric actuated micro-tweezer with force sens...

引用

IEEE International Conference on Real-time Computing and robotics (RCAR)

作者： Haoxiang Zhao Haoran Rong State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China Heilongjiang University of Science and Technology Harbin China

With the development of micro-electromechanical systems, micro-manipulation robots are extensively used in micro-nano manufacturing due to their high precision. As the core component of the MEMS, the micro-tweezers which are driven by PZT, ultrasonic motors to grasp millimeter and micron objects have developed rapidly. However, it is pretty tough for these tweezers to attain bendy gripping of objects due to the lack of sensors at the cease of the tweezer. Therefore, a force-sensing micro-tweezer with micro-operating device is designed in this paper, which is appropriate for the clamping of optical fibers of different diameters and controlled with the aid of a single-chip microcomputer. The working principle is that the certain opening at the end of the micro-tweezer is closed when the PZT outputs a tiny displacement which is amplified through the two-stage displacement amplifying mechanism, at some stage in which the PWM sign generated by using the controller and amplified by means of the signal amplifier is transmitted in this device and used to control the PZT. To enforce the function of the pressure feedback grasping of optical fibers of distinctive diameters, the sign generated by the pressure sensor at the end of the micro-tweezer is despatched to the controller after the fiber is being clamped. In this paper, the design, simulation and evaluation of the micro-tweezer, the setup and calibration of the system, and the experiments and performance assessments of the micro-tweezer are carried out. The results exhibit that the micro-tweezer can clamp the fiber with diameter of 100-300μm precisely with its output displacement at 360μm, force-sensing resolution accuracy at 9.8mN, and the clamping force at 0.392N. The force-sensing device now not only has a small volume, but also realizes the speedy replacement of a number of components, which advantage it to be widely-used in future micro-tweezers application scenario.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Research on Longitudinal Ultrasonic Vibration Assisted Flip Chip Bonding Process

Research on Longitudinal Ultrasonic Vibration Assisted Flip ...

引用

International Conference on (ICEPT) Electronic Packaging Technology

作者： Dapeng Liu Jianxin Qiao Longqiu Li Zhi Qiao Bin Zhou Yunkang Su State Key Laboratory of Robotics and System Key Laboratory for Microsystems and Microstructure Manufacturing Harbin Institute of Technology Harbin China School of Mechanical and Electrical Engineering Harbin Institute of Technology Harbin China

ISBN: (数字)9798350353808

ISBN: (纸本)9798350353815

The current flip-chip bonding technology still faces defects such as surface thermal burnout of chips due to excessively high process temperature and significant mechanical stress leading to solder joint fracture and chip damage. This paper proposes a longitudinal ultrasonic-assisted flip-chip bonding process. By introducing ultrasonic vibration of a certain frequency in the bonding direction, stress on the device during the bonding process is reduced, leading to lower bonding temperatures and improved bonding quality and reliability. However, unreasonable ultrasonic bonding parameters may result in the fracture at the bonding interface by hammering effect. Based on the longitudinal ultrasonic-assisted bonding experimental platform was constructed to conduct bonding experiments. Through orthogonal contrast experiments, it has been determined that longitudinal ultrasonic assisted technology could reduce the bonding temperature at most by 180°C and bonding duration by 3-5s with ultrasonic parameter of 26W/cm 2 sound intensity and 4~4.66MPa prebonding pressure. This study provides valuable insights for optimizing flip-chip bonding processes.

关键词： Vibrations Temperature distribution Ultrasonic imaging Acoustics Flip-chip devices Bonding Surface cracks

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：