检索结果-内蒙古大学图书馆

11th International Conference on Mechatronics and robotics Engineering, ICMRE 2025

作者： Huang, Yao Ju, Haotian Guo, Songhao Zheng, Tianjiao Zhao, Jie Zhu, Yanhe Harbin Institute of Technology State Key Laboratory of Robotics and System Harbin China

ISBN: (纸本)9798331509293

For knee rehabilitation patients, it is difficult to maintain balance while walking, and completing a normal gait cycle is challenging. Therefore, we propose a lower limb exosuit tailored for the knee rehabilitation patients to assist in normal walking, and experimentally evaluated the assistance effect of the lower limb exosuit. We mimic the mechanism of the skeletal muscles near the knee joint, by contracting and relaxing the length of the flexible Bowden cable between the thigh and calf, generating assistive torque on the knee joint periodically. We use Inertial Measurement Unit (IMU) to measure lower limb motion parameters, identify gait cycle states, and calculate corresponding plantar pressure and knee joint torque for each phase. We compared surface electromyography (sEMG) signals of three muscle groups (biceps femoris (BF), quadriceps femoris (QF), and gastrocnemius (G)) under conditions of wearing and not wearing the exosuit. The experimental results show that compared to not wearing the exosuit, the mean normalized sEMG signals of the three muscle groups decreased by 4.61 %, 2.41 %, and 3.97% respectively while wearing it, the peak values decreased by 11.60%, 25.69%, and 14.99% respectively, with the quadriceps femoris receiving the highest degree of assistance. © 2025 IEEE.

关键词： Neuromuscular rehabilitation

来源：评论

学校读者我要写书评

暂无评论

Simultaneously improving fabrication accuracy and interfacial bonding strength of multi-material projection stereolithography by multi-step exposure

引用

International Journal of Smart and Nano Materials 2024年第2期15卷 387-404页

作者： Xinghong Deng Guangyu Zhang Yi Mo Zhiyuan Huang Dekai Zhou Jing Qiao Longqiu Li State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbinChina School of Materials Science and Engineering Harbin Institute of TechnologyHarbinChina

Multi-material additive manufacturing(MMAM)takes full advantage of the ability to arbitrarily place materials of addi-tive manufacturing technology,enabling immense design free-dom and functional print *** MMAM technologies,projection stereolithography(PSL)exhibits a great balance of high resolution and fast printing ***,fabrication accuracy of multi-material PSL is hin-dered by large overcure used to strengthen interfacial bond-ing weakened by chemical affinity and material-exchange *** present a novel multi-step exposure method for multi-material PSL process to overcome this ***,the whole layer is moderately exposed producing over-cure of single-material PSL level to generate *** weakened interfaces are strengthened individually with addi-tional steps of *** multi-step exposure is integrated into the already efficient materials printing order of multi-material PSL *** depth and overcure of photocur-able resins are modeled and *** required to achieve sufficient interfacial bonding of single-material interfaces built through material-exchange process and multi-material interfaces with altering materials printing order is determined with tensile *** channels are used to compare fabrication accuracy of traditional single-step exposure and our multi-step exposure *** method can be widely applied in multi-material PSL to improve fabri-cation accuracy in a variety of applications including micro-fluidic devices.

关键词： Additive manufacturing multi-material projection stereolithography multi-step exposure interfacial bonding

来源：评论

学校读者我要写书评

暂无评论

A Simple Control Scheme with Model Predictive Control-Based Footstep Planner and Virtual Model Control for Planar Biped Robot 16th

A Simple Control Scheme with Model Predictive Control-Based ...

引用

16th International Conference on Modelling, Identification and Control, ICMIC 2024

作者： Heng, Shuai Song, Chao Chen, Boyang Zhang, Yue Zang, Xizhe Zhao, Jie State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150080 China

ISBN: (纸本)9789819617760

In this paper, our objective is to achieve stable walking for biped robots using a simple yet powerful control scheme. This control scheme consists of a planning and control framework. For the motion planner, we utilize the Linear Inverted Pendulum Model as the equations of motion for the biped. Model Predictive Control is applied to plan the Zero Moment Point (ZMP) for future steps. Trajectories for the swing foot and base are generated based on the planned ZMP. Subsequently, a straightforward and intuitive control method called Virtual Model Control is employed to calculate control torques for tracking the generated trajectories. Finally, simulations conducted on flat-foot bipedal robots in MuJoCo validate the effectiveness of the proposed control scheme in achieving stable walking and attaining the desired locomotion velocity. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2025.

关键词： Predictive control systems

来源：评论

学校读者我要写书评

暂无评论

Task-oriented Hierarchical Control of Modular Soft Robots with External Vision Guidance

引用

Journal of Bionic Engineering 2022年第3期19卷 657-667页

作者： Xin Sui Tianjiao Zheng Jian Qi Zhiyuan Yang Ning Zhao Jie Zhao Hegao Cai Yanhe Zhu State Key Laboratory of Robotics and System Harbin Institute of Technology(HIT)Harbin150001China

General,high-precision theoretical modeling method is not well developed in the field of soft robotics,which holds back motion control and practical application of soft *** concept of modularization brings novel structure,novel locomotion patterns as well as novel control method for soft *** paper presents the concept of hierarchical control method for modular soft robot system and a H-configuration pneumatic modular soft robot is designed as the control *** H-configuration modular soft robot is composed of two basic motion units that take worm-like locomotion *** locomotion principle of the basic motion unit is analyzed and the actuation sequence is optimized by evolution strategy in VOXCAD simulation *** differential drive method is applied to the H-configuration modular soft robot with multi motion modes and vision sensor is used to control the motion mode of the *** H-configuration modular soft robot and the basic motion unit are assembled by a cubic soft module made of silicone ***,connection mechanism is designed to ensure that the soft modules can be assembled in any direction and *** are conducted to verify the effect of the hierarchical control method of the modular soft robots.

关键词： Soft robot Modular robot Locomotion pattern optimization VOXCAD simulation software Vision feedback control

来源：评论

学校读者我要写书评

暂无评论

An efficient stiffness analysis model based on shear deformation theory for flexible skin shear variable-sweep wing

引用

Chinese Journal of Aeronautics 2024年第10期37卷 445-458页

作者： Yue BAI Guang YANG Hong XIAO Hongwei GUO Rongqiang LIU Bei LIU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China China Aerodynamics Research and Development Center Institute of High-Speed AerodynamicsMianyang 621000China

Fixed-wing aircraft cannot maintain optimal aerodynamic performance at different flight speeds. As a type of morphing aircraft, the shear variable-sweep wing(SVSW) can dramatically improve its aerodynamic performance by altering its shape to adapt to various flight *** order to achieve smooth continuous shear deformation, SVSW's skin adopts a flexible composite skin design instead of traditional aluminum alloy materials. However, this also brings about the non-linear difficulty in stiffness modeling and calculation. In this research, a new SVSW design and efficient stiffness modeling method are proposed. Based on shear deformation theory, the flexible composite skin is equivalently modeled as diagonally arranged nonlinear springs, simulating the elastic force interaction between the skin and the mechanism. By shear loading tests of flexible composite skin, the accuracy of this flexible composite skin modeling method is verified. The SVSW stiffness model was established, and its accuracy was verified through static loading tests. The effects of root connection, sweep angles, and flexible composite skin on the SVSW stiffness are analyzed. Finally, considering three typical flight conditions of SVSW: low-speed flow(Ma = 0.3,Re = 5.82 × 10^(6)), transonic flow(Ma = 0.9, Re = 3.44 × 10^(6)), and supersonic flow(Ma = 3,Re = 7.51 × 10^(6)), the stiffness characteristics of SVSW under flight conditions were *** calculated results guide the application of SVSW.

关键词： Shear variable-sweep wing(SVSW) Flexible composite skin Morphing mechanism Stiffness analysis Loading tests Structure

来源：评论

学校读者我要写书评

暂无评论

A Novel FBG Shape Sensor Based on Mechanical Model for Continuum Manipulator 10

A Novel FBG Shape Sensor Based on Mechanical Model for Conti...

引用

10th International Conference on Automation, robotics, and Applications, ICARA 2024

作者： Zhang, Yuxin Dong, Wei Yan, Zhiyuan Gao, Yongzhuo Harbin Institute of Technology State Key Laboratory of Robotics and System Harbin China

ISBN: (纸本)9798350394245

Fiber Bragg Gratings (FBG) are used widely for that it is small and sensitive. It is suitable to insert a sensor based on FBGs to some narrow cavities. At the same time, a slender continuum structure requires tiny sensors inside it. A multi-node differential curvature measurement sensor of FBG fiber is designed in this paper to realize temperature compensation. Considering the friction among FBG, driving wires, and niti tube and external forces applied on the end, a mechanical model about the FBG sensor and the continuum manipulator is proposed. At last, a linear interpolation method is used in the curvature estimation. Under the condition that there is no end resistance and only the bending moment and friction along the outer surface of the continuum generated by the steel wire driven by the motor the absolute measurement error of the position of the end of the continuum is 1.9mm. © 2024 IEEE.

关键词： Fiber Bragg gratings

来源：评论

学校读者我要写书评

暂无评论

High-precision trajectory calibration for robot surface machining by meta-heuristic search algorithm from local error in machining area

引用

International Journal of Advanced Manufacturing Technology 2025年第5期138卷 2281-2295页

作者： Bi, Guangde Lu, Lei Zhang, Lei Fan, Cheng Sun, Lining School of Mechanical and Electric Engineering Jiangsu Provincial Key Laboratory of Advanced Robotics Soochow University Suzhou215123 China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150001 China

Industrial robots used in complex surface machining are gradually increasing because of their high flexibility and large workspace. However, due to their low geometric accuracy, their application in high-precision surface machining is hindered. In order to improve the machining accuracy, a high-precision robot trajectory calibration method for complex surface machining is proposed. In the machining process, the machining trajectory is usually only within a certain machining area. In the method, high-precision standard balls are set at the boundary of the machining area. Based on the precise position information of these standard balls, the trajectory of the robot in the machining area is calibrated. Compared with the global robot calibration method, the proposed method can calibrate the robot trajectory in the machining area through standard parts, which will improve the trajectory accuracy of the machining robot to the level of repeated positioning accuracy. In this method, a large amount of standard ball data is obtained by the in-place measuring device before the machining process. Then, based on these data, a meta-heuristic search algorithm is used to calibrate the kinematic deviation of the robot measurement and the machining system. The trajectory of the machining robot is adjusted by the kinematic deviation after calibration, and it is applied to the motion control of the machining process to improve the positioning accuracy of the machining trajectory. In the end, to verify the accuracy and practicability of the machining trajectory obtained by this method, measurement and machining experiments are carried out. © The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2025.

关键词： Industrial robots

来源：评论

学校读者我要写书评

暂无评论

Research progress of space non-pyrotechnic low-shock connection and separation technology(SNLT):A review

引用

Chinese Journal of Aeronautics 2022年第11期35卷 113-154页

作者： Honghao YUE Yifei YANG Yifan LU Fei YANG Jun WU Qi RUAN Zongquan DENG State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 15000lChina

Space missions have become diversified in recent years, where connection and separation devices play a crucial role as key components of various spacecraft. Traditional pyrotechnic devices have the advantages of large carrying capacity, rapid motion and functional reliability. However,their shortcomings such as great release shock, poor safety, unrepeatability and other prominent defects make them unsuitable for new generation spacecraft such as microsatellites to separate at low shock or lock repeatedly, etc. Therefore, it is necessary to develop space non-pyrotechnic low-shock connection and separation devices(SNLD) which are required for advanced aerospace missions. In this paper, the progress of the research on space non-pyrotechnic low-shock connection and separation technology(SNLT) is summarized and reviewed. Proceed from the principle of reducing shock for non-pyrotechnic devices, present studies are classified from the perspective of actuating technology and systematic designing methods. For non-pyrotechnic actuating techniques,according to different driving sources, the separation devices are classified into several main categories: electric, magnetic, gas and thermal actuating devices. The actuation principle and application prospect of separation techniques are introduced and the working process, dimension and mechanical properties of typical devices are compared and evaluated. For the systematic designing method, the common mechanism types of SNLDs are summarized according to the designing concept of reducing shock. Then connection configurations are classified according to the structural forms of connection devices, of which the principles, bearing capacities and general applications are discussed. This paper systematically summarizes the key problems, puts forward the future development trend of SNLT, and points out the breakthrough direction for related scholars.

关键词： Connection Low-shock Non-pyrotechnic Separation Space

来源：评论

学校读者我要写书评

暂无评论

Ultrasound-guided prostate percutaneous intervention robot system and calibration by informative particle swarm optimization

引用

Frontiers of Mechanical Engineering 2022年第1期17卷 18-33页

作者： Jiawen YAN Bo PAN Yili FU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China

Applying a robot system in ultrasound-guided percutaneous intervention is an effective approach for prostate cancer diagnosis and *** limited space for robot manipulation restricts structure volume and *** this paper,an 8-degree-of-freedom robot system is proposed for ultrasound probe manipulation,needle positioning,and needle insertion.A novel parallel structure is employed in the robot system for space saving,structural rigidity,and collision *** particle swarm optimization method based on informative value is proposed for kinematic parameter identification to calibrate the parallel structure *** method identifies parameters in the modified kinematic model stepwise according to parameter *** experiments prove that the robot system can realize motions needed in *** applying the calibration method,a reasonable,reliable forward kinematic model is built,and the average errors can be limited to 0.963 and 1.846 mm for insertion point and target point,respectively.

关键词： ultrasound image guidance prostate percutaneous intervention parallel robot kinematics identification particle swarm optimization informative value

来源：评论

学校读者我要写书评

暂无评论

Mechanical design,modeling,and identification for a novel antagonistic variable stiffness dexterous finger

引用

Frontiers of Mechanical Engineering 2022年第3期17卷 59-74页

作者： Handong HU Yiwei LIU Zongwu XIE Jianfeng YAO Hong LIU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China

This study traces the development of dexterous hand research and proposes a novel antagonistic variable stiffness dexterous finger mechanism to improve the safety of dexterous hand in unpredictable environments,such as unstructured or man-made operational errors through comprehensive consideration of cost,accuracy,manufacturing,and *** on the concept of mechanical passive compliance,which is widely implemented in robots for interactions,a finger is dedicated to improving mechanical *** finger mechanism not only achieves passive compliance against physical impacts,but also implements the variable stiffness actuator principle in a compact finger without adding supererogatory *** achieves finger stiffness adjustability according to the biologically inspired stiffness variation principle of discarding some mobilities to adjust *** mechanical design of the finger and its stiffness adjusting methods are *** stiffness characteristics of the finger joint and the actuation unit are *** results of the finger joint stiffness identification and finger impact tests under different finger stiffness presets are provided to verify the validity of the *** have been experimentally proven to be robust against physical ***,the experimental part verifies that fingers have good power,grasping,and manipulation performance.

关键词： multifingered hand mechanism design robot safety variable stiffness actuator

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：