检索结果-内蒙古大学图书馆

Simultaneously Calibration of Multi Hand-Eye Robot system Based on Graph

学校读者我要写书评

暂无评论

arXiv 2023年

作者： Zhou, Zishun Ma, Liping Liu, Xilong Cao, Zhiqiang Yu, Junzhi The Institute of Automation Chinese Academy of Sciences Beijing100190 China The College of Electrical Engineering and Computer Science Australian National University Canberra2601 Australia The State Key Laboratory of Management and Control for Complex Systems Institute of Automation Chinese Academy of Sciences Beijing100190 China The School of Artificial Intelligence University of Chinese Academy of Sciences Beijing100049 China The State Key Laboratory for Turbulence and Complex System Department of Advanced Manufacturing and Robotics BIC-ESAT College of Engineering Peking University Beijing100871 China

Precise calibration is the basis for the vision-guided robot system to achieve high-precision operations. systems with multiple eyes (cameras) and multiple hands (robots) are particularly sensitive to calibration errors, such as micro-assembly systems. Most existing methods focus on the calibration of a single unit of the whole system, such as poses between hand and eye, or between two hands. These methods can be used to determine the relative pose between each unit, but the serialized incremental calibration strategy cannot avoid the problem of error accumulation in a large-scale system. Instead of focusing on a single unit, this paper models the multi-eye and multi-hand system calibration problem as a graph and proposes a method based on the minimum spanning tree and graph optimization. This method can automatically plan the serialized optimal calibration strategy in accordance with the system settings to get coarse calibration results initially. Then, with these initial values, the closed-loop constraints are introduced to carry out global optimization. Simulation experiments demonstrate the performance of the proposed algorithm under different noises and various hand-eye configurations. In addition, experiments on real robot systems are presented to further verify the proposed method. © 2023, CC BY-SA.

关键词： Multipurpose robots

An adaptable robotic system for assembling irregular earphone parts on factory automation

学校读者我要写书评

暂无评论

An adaptable robotic system for assembling irregular earphon...

2019 IEEE International Conference on robotics and Biomimetics, ROBIO 2019

作者： Zhang, Guiwei Li, Changle Zhang, Xuehe Liu, Gangfeng Liu, Yubin Zhao, Jie Xu, Shuo Harbin Institue of Technology State Key Laboratory of Robotics and System Harbin China

ISBN: (纸本)9781728163215

The assembly of earphone parts in electro acoustic factory automation is a challenging problem for industrial robots. The main difficulties come from the fact that conventional industrial robots perform poorly on rapid-updated earphone parts, which are characterized by small size, variety and irregular shapes. What's worse, the robot cannot adapt to the earphone parts with different poses effectively. In order to tackle above problems, an adaptable robotic system guided by the 3D laser triangulation sensor and six-axis F/T sensor is built in this paper. In addition, to reduce position errors caused by the 3D sensor accidently, an assembly strategy which is implemented by the admittance controller learned from human teaching, is proposed for assembling earphone parts. Specifically, AdaBoost-based GPR method is applied to derive the admittance gain, so that the controller perform effectively. A series of comparative experiments prove that the established system could demonstrate superior performance on the earphone parts with small size, variety and irregular shapes. Furthermore, it is also validated that the assembly strategy could be executed effectively on the earphone parts with different poses. © 2019 IEEE.

关键词： Controllers

Initial energy deposition and initiation mechanism of nanosecond laser damage caused by KDP surface micro-defects

学校读者我要写书评

暂无评论

arXiv 2021年

作者： Yang, Hao Chen, Mingjun Cheng, Jian Liu, Zhichao Zhao, Linjie Liu, Qi Tan, Chao Wang, Jian State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150001 China Research Center of Laser Fusion China Academy of Engineering Physics Mianyang621900 China

To enable an exploration of the initiation mechanism of nanosecond laser damage on a potassiumdihydrogen phosphate (KDP) surface, a defect-assisted energy deposition model is developed that involves light intensity enhancement and a sub-band gap energy level structure. The simulations provide an explanation on why the laser-induced damage threshold (LIDT) of the KDP crystal is two orders of magnitude lower than the theoretical value. The model is verified by use of the transient images that appear during the laser damage. In addition, the dimensions of the "dangerous" surface defects that are the most sensitive to the laser damage are proposed. This work enables clarification on the initial energy deposition (IED) and initiation mechanism of the nanosecond laser damage caused by the KDP surface defectson micro-nano scale. It is helpful in understanding the laser-matter interactions and to improve the processing technique for high quality optical components. Copyright © 2021, The Authors. All rights reserved.

关键词： Laser damage

The consistent behavior of negative Poisson's ratio with interlayer interactions

学校读者我要写书评

暂无评论

arXiv 2022年

作者： Wang, Yancong Yu, Linfeng Zhang, Fa Chen, Qiang Zhan, Yuqi Zheng, Xiong Wang, Huimin Qin, Zhenzhen Qin, Guangzhao State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body College of Mechanical and Vehicle Engineering Hunan University Changsha410082 China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150001 China Hunan Key Laboratory for Micro-Nano Energy Materials & Device School of Physics and Optoelectronics Xiangtan University Hunan Xiangtan411105 China School of Physics and Microelectronics Zhengzhou University Zhengzhou450001 China

Negative Poisson's ratio (NPR) is of great interest due to the novel applications in lots of fields. Films are the most commonly used form in practical applications, which involves multiple layers. However, the effect of interlayer interactions on the NPR is still unclear. In this study, based on first principles calculations, we systematically investigate the effect of interlayer interactions on the NPR by comparably studying single-layer graphene, few-layer graphene, h-BN, and graphene-BN heterostructure. It is found that they almost have the same geometry-strain response. Consequently, the NPR in bilayer graphene, triple-layer graphene, and graphene-BN heterostructure are consistent with that in single-layer graphene and h-BN. The fundamental mechanism lies in that the response to strain of the orbital coupling are consistent under the effect of interlayer interactions. The deep understanding of the NPR with the effect of interlayer interactions as achieved in this study is beneficial for the future design and development of micro-/nanoscale electromechanical devices with novel functions based on nanostructures. © 2022, CC BY-NC-SA.

关键词： Graphene

Look-to-Touch: A Vision-Enhanced Proximity and Tactile Sensor for Distance and Geometry Perception in Robotic Manipulation

学校读者我要写书评

暂无评论

arXiv 2025年

作者： Dong, Yueshi Ren, Jieji Liu, Zhenle Peng, Zhanxuan Yuan, Zihao Zhang, Ningbin Gu, Guoying State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong University Shanghai China Robotics Institute School of Mechanical Engineering Shanghai Jiao Tong University Shanghai China

Camera-based tactile sensors provide robots with a high-performance tactile sensing approach for environment perception and dexterous manipulation. However, achieving comprehensive environmental perception still requires cooperation with additional sensors, which makes the system bulky and limits its adaptability to unstructured environments. In this work, we present a vision-enhanced camera-based dual-modality sensor, which realizes full-scale distance sensing from 50 cm to -3 mm while simultaneously keeping ultra-high-resolution texture sensing and reconstruction capabilities. Unlike conventional designs with fixed opaque gel layers, our sensor features a partially transparent sliding window, enabling mechanical switching between tactile and visual modes. For each sensing mode, a dynamic distance sensing model and a contact geometry reconstruction model are proposed. Through integration with soft robotic fingers, we systematically evaluate the performance of each mode, as well as in their synergistic operation. Experimental results show robust distance tracking across various speeds, nanometer-scale roughness detection, and sub-millimeter 3D texture reconstruction. The combination of both modalities improves the robot’s efficiency in executing grasping tasks. Furthermore, the embedded mechanical transmission in sensor allows for fine-grained intra-hand adjustments and precise manipulation, unlocking new capabilities for soft robotic hands. Copyright © 2025, The Authors. All rights reserved.

关键词： Robotic arms

A Novel Hybrid Method for Fault Diagnosis of Industrial Equipment Based on Vibration Signals

学校读者我要写书评

暂无评论

A Novel Hybrid Method for Fault Diagnosis of Industrial Equi...

Prognostics and system Health Management Conference (PHM-Qingdao)

作者： Sen Tao Kai Wang Peng Zeng Tianda Yu Hao Wu Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China University of Chinese Academy of Sciences Beijing China Shenyang China Nuclear Power Institute of China Chengdu China State Key Laboratory of Power Transmission Equipment & System Security and New Technology Chongqing University Chongqing China

Industrial equipment reliability is a critical issue that smart manufacturing systems must address. Implementation of online fault diagnosis for industrial equipment is a promising technology that can improve equipment reliability. Vibration analysis is a popular technique for equipment condition monitoring. For the non-linear and non-stationary features of industrial vibration signals, a hybrid model based on wavelet transform (WT), support vector machine (SVM), and grey wolf optimization algorithm (GWO) is proposed. The time-frequency domain features of fault signals are extracted by wavelet transform to solve the non-linearity of signals, and the obtained feature vectors are input into SVM for classification. Aiming at the problem of setting penalty coefficient and kernel function parameters, GWO is introduced to seek hyperparameters by using the hunting principle of wolves. In the experimental part, firstly, the comparison of the GWO-WT-SVM, GWO-SVM and SVM models was carried out. Secondly, Comparison with classical classification algorithms is made. Apparently, the GWO-WT-SVM model achieves higher accuracy than other models in bearing fault diagnosis.

关键词：

An Improved UAV Path Optimization Algorithm for Target Accurately and Quickly Localization

学校读者我要写书评

暂无评论

An Improved UAV Path Optimization Algorithm for Target Accur...

2021 International Conference on Information, Cybernetics, and Computational Social systems, ICCSS 2021

作者： Liang, Rui Wu, Kai Xu, Sheng Xu, Tiantian Ma, Xiaoyi Fu, Lianyu City West Power Supply Branch State Grid Tianjin Electric Power Company Tianjin China Shenzhen Institute of Advanced Technology Guangdong Provincial Key Lab of Robotics and Intelligent System Shenzhen China Shenzhen Institute of Advanced Technology Guangdong-Hong Kong-Macao Joint Laboratory of Human-Machine Intelligence-Synergy Systems Shenzhen China State Grid Tianjin Information Telecommunication Company Tianjin China

ISBN: (纸本)9781665402453

Angle-of-arrival (AOA) target localization using the unmanned aerial vehicle (UAV) has been widely applied in many practical applications. To localize an invasive target quickly and accurately, both the estimation and UAV path optimization algorithms are required. This paper focuses on developing a path optimization method to improve the target estimation performance. Firstly, the problem formulation of AOA target localization is introduced. Secondly, the classical pseudolinear Kalman filter (PLKF) and the gradient-based path optimization are presented. Thirdly, we analyze the problems that existed in the previous methods and propose an improved gradient-descent path optimization algorithm combined with a simple grid search method. Finally, the simulation examples verify the effectiveness of the proposed methods. © 2021 IEEE.

关键词： Unmanned aerial vehicles (UAV)

Fast automatic docking control for electric tractors

学校读者我要写书评

暂无评论

Fundamental Research 2024年

作者： Li, Pengpeng Bai, Yu Li, Weihua Chen, Bowen You, Bindi Zhuang, Hongchao Wang, Jianfeng Gao, Haibo Deng, Zongquan School of Astronautics Harbin Institute of Technology Harbin 150001 China School of Automotive Engineering Harbin Institute of Technology (Weihai) Weihai 264201 China Yangtze River Delta HIT robot technology research institute Wuhu 241060 China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin 150001 China Tianjin University of Technology and Education Tianjin 300222 China

In this study, we investigate the automatic docking of an electric tractor with a semi-trailer in narrow and long-distance scenarios. We propose an automatic docking method based on a multi-sensor fusion high-precision positioning algorithm and a multi-strategy docking control algorithm. To solve the heading-angle error of the involved camera due to mechanical errors, a compensation value in the form of angle deviation is introduced. To alleviate the increase in the camera detection error with longitudinal distance, a piecewise coordinate compensation function is proposed. Repositioning is performed using light detection and ranging (Lidar) to improve the pose-perception accuracy to the millimeter level. To avoid the interference of point clouds on the relocation accuracy of Lidar, a search-and-location method that combines both small and large neighborhoods is proposed. To achieve the desired docking success rate, a multi-strategy-adjustment control algorithm is used to enable comprehensive adjustment, including approximate control of the maximum angle based on lateral deviation and fine proportional-integral-differential (PID) control based on lateral deviation and longitudinal distance, security check cycle and premature warning mechanism, and risk avoidance control. Finally, the reliability and stability of the design scheme are verified by conducting multiple experiments involving actual vehicles. © 2024

关键词： Automatic docking Electric tractor Fusion positioning Piecewise proportional-integral-differential

Real-time dynamic grasping force optimization of multi-fingered dextrous hand

学校读者我要写书评

暂无评论

Real-time dynamic grasping force optimization of multi-finge...

2019 IEEE International Conference on robotics and Biomimetics, ROBIO 2019

作者： Liu, Ziqi Jiang, Li Yang, Bin State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150080 China

ISBN: (纸本)9781728163215

A technique for real-time dynamic grasping force optimization is presented in this article. The force optimization is divided into online and offline two parts. The improved linear constrained gradient flow algorithm reduces the dimension of the description matrix based on the traditional gradient flow, and the non-negative linear combination method is introduced to optimize the initial force of the algorithm. Relatively optimal initial grasping force and dimensionality reduction gradient flow algorithm improve the calculating efficiency online. The corresponding illustrative examples are made to verify that the proposed method to obtain both optimal grasping force and faster convergence rate in the dynamic grasp process is feasible. © 2019 IEEE.

关键词： Constrained optimization