检索结果-内蒙古大学图书馆

Light tuning CO/H_(2)composition on Ag:Unraveling CO_(2)mass transfer and electron-phonon coupling in plasmon-enhanced electrocatalysis

引用

Nano Research 2025年第1期18卷 173-185页

作者： Rui Lin Dong Fan Luca MBerger Thomas Possmayer Yu Zhou Jiexin Zhu Xingbao Chen Wen Luo Lars Allmendinger Andreas Tittl Leonardo de Souza Menezes Guillaume Maurin Shihe Yang and Stefan AMaier Nanoinstitute Munich Faculty of PhysicsLudwig-Maximilians-Universität München80539 MunichGermany Institut Charles Gerhardt Montpellier UMR 5253 CNRS ENSCM UniversitéMontpellierPlace E.Bataillon34090 MontpellierFrance Guangdong Provincial Key Lab of Nano-Micro Material Research School of Advanced MaterialsPeking University Shenzhen Graduate SchoolShenzhen 518055China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Faculty of Chemistry and Pharmacy Ludwig-Maximilians-Universität München81377 MunichGermany Departamento de Física Universidade Federal de Pernambuco50670-901 Recife-PEBrazil School of Physics and Astronomy Monash University Clayton CampusMelbourneVictoria 3800Australia Department of Physics Imperial College LondonSW72AZ LondonUK

Plasmon-enhanced electrocatalysis(PEEC)is an emerging approach to mitigate CO_(2)*** mechanisms behind CO_(2)adsorption and reduction at the catalyst-electrolyte interface in PEEC still need to be further ***,we employ a well-defined Ag nanostructure to elucidate these pivotal *** shining light with wavelengths of 625,525,405 nm on Ag,an adjustable CO/H_(2)ratio from 35 to 1 can be *** reaction pathway changing under plasmonic excitation does not originate from the lowered CO_(2)mass transfer in the vicinity of Ag,as the electrochemical quartz crystal microbalance results unravel that a slightly elevated temperature in bulk electrolyte caused by light irradiation cannot weaken the CO_(2)adsorption at the Ag catalyst-electrolyte *** calculations reveal that optical excitation towards shorter wavelengths leads to a progressive lowered energy barrier for H_(2)formation together with an enhanced energy barrier for^(*)COOH *** thermodynamically suppressed,CO_(2)reduction can still be improved kinetically by optimizing the excitation wavelength and intensity,being accompanied with the enhanced *** absorption spectroscopy results further correlate the higher photocurrent with a prolonged electron-phonon coupling time,verifying that the improvement of CO_(2)reduction kinetics in PEEC can be realized by hot electron harnessing.

关键词： plasmonic catalysis photoelectrochemical CO_(2)reduction CO/H_(2)ratio hot electron generation electronphonon coupling thermal effect

来源：评论

学校读者我要写书评

暂无评论

Gradient Structure of Ti-Al-C Ternary Carbide Prepared by Hot-pressing Sintering

引用

Journal of Wuhan University of technology(materials Science) 2005年第2期20卷 5-7页

作者：梅炳初 State key lab oratory of Advanced Technology for Material Synthesis and Processing Wuhan University of TechnologyWuhan 430070 China Prof

X-ray diffraction (XRD) analysis on different polished surfaces normal to the hot pressing direction reveals that the phase compositions of the polished surfaces from the outside to the inside are pure TiC, Ti_3AlC_2+TiC, pure Ti_3AlC_2 and Ti_2AlC+Ti_3AlC_2, no matter elemental powder or TiC is used as raw materials. It is found that ternary-layered carbide Ti_2AlC samples synthesized at 1500 ℃ by hot-pressing sintering are inhomogeneous and have a gradient *** probe X-ray micro-analysis (EPMA) indicates that the Al content along the hot pressing axis is parabolic, it is the highest in the center and the lowest at the both ends, while the Ti content is constant along the axis. The experimental result reveals that the evaporation of Al in samples in an open system during hot pressing sintering results in a gradient structure.

关键词： titanium aluminum carbide ceramic gradient structure evaporation

来源：评论

学校读者我要写书评

暂无评论

Boosting oxygen evolution of LiCoO2 electrocatalysts via lithium defect

Materials Today Catalysis

引用

materials Today Catalysis 2025年 8卷

作者： Li, Huamei Li, Mengyuan Liao, Lingling Yang, Han Xiang, Kun Luo, Guoqiang Xie, Mingjiang School of Chemistry and Environmental Engineering Engineering Research Center of Phosphorus Resources Development and Utilization of Ministry of Education Wuhan Institute of Technology Wuhan430205 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Hubei Key Lab for Processing and Application of Catalytic Materials College of Chemical Engineering Huanggang Normal University Huanggang438000 China

The challenge of the complex oxygen evolution reaction (OER) currently impedes the efficient production of hydrogen via electrolytic water splitting. To address this issue, the development and improvement of effective electrocatalysts are required. LiCoO2, a key material in lithium-ion batteries, has shown promising potential as an electrocatalyst for electrochemical energy conversion. However, OER catalysts derived from LiCoO2 have faced obstacles such as high overpotential and a complicated preparation process. In this study, the preparation method is adjusted to optimize the synthesis of Li1-xCoO2 with a defective structure, resulting in an impressive overpotential of only 290 mV at a current density of 100 mA cm−2 and a remarkable Tafel slope of 15.2 mV dec−1. The exceptional catalytic activity of Li1-xCoO2 can be attributed to the absence of Li, which triggers oxidative alterations in the electronic structure of Co. Density functional theory (DFT) calculations reveal that Li defects can influence the d-band center of active Co sites, enhancing the adsorption capabilities of Co sites towards *OOH intermediates and increasing the conductivity of the electrocatalyst during the OER process. These alterations improve the velocity of the crucial step in the reaction, ultimately boosting the catalyst's overall performance and efficiency. © 2024 The Authors

关键词： Lithium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Fabrication of Homogenous Dispersion TiB_2-Al_2O_3 Composites

引用

Journal of Wuhan University of technology(materials Science) 2011年第4期26卷 681-683页

作者：张金咏 State Key Lab of Advanced Technology for Material Synthesis and Processing Wuhan University of Technology

In order to get a homogenous mixture and compact of TiB2-Al2O3, hybridization as a surface modification method was used to prepare nano-scale Al2O3 coated TiB2 particles. PE-wax particles were first coated onto TiB2 particles by hybridization, and then the nano-scale Al2O3 particles were coated onto the surface of TiB2 coated by PE-wax particles again. SEM, TEM and EDS were used to characterize the microstructure of as-received core/shell particles and its compacts. The experimental results show that a particle-scale homogenous dispersion of TiB2 and Al2O3 can be formed not only in mixed powder but also in dewaxed compacts. The compacts then were sintered by gas-pressing sintering （GPS）. Finial products show improved mechanic properties comparing with reference samples fabricated by normal ways.

关键词： TiB2/Al2O3 hybridization dispersion

来源：评论

学校读者我要写书评

暂无评论

Controlling Growth of ZnO Nanostructures Via A Solution Route

引用

Journal of Wuhan University of technology(materials Science) 2009年第2期24卷 249-253页

作者：贾铁昆 State Key Lab of Advanced Technology for Material Synthesis and Processing Wuhan University of Technology

A solution method was developed for fabricating ZnO nanostructures using （NH4）2CO3 as starting material SEM analysis shows that ZnO nanostructures exhibit nanorod, branch and flower-like morphologies. The crystal phase of as-synthesized products was characterized by X-ray diffraction （XRD）. The growth process, formation mechanism and optical property were also discussed by means of transmission electronic microscopy （TEM）, high resolution transmission microscopy （HRTEM） and photoluminescence （PL）. The growth direction of ZnO nanostructures was investigated based on the results of HRTEM. The PL spectrum shows two strong peaks （centered at around -387 and -470 nm） and a broad Deak （centered at around -580 nm）.

关键词： ZnO nanostructures pH solvent luminescence property

来源：评论

学校读者我要写书评

暂无评论

Fabrication of laminated TiB2-B4C/Cu-Ni composites by electroplating and spark plasma sintering

引用

Journal of materials Science & technology 2017年第10期33卷 1172-1176页

作者： Ziyi Wu Jinyong Zhang Taojie Shi Fan Zhang Liwen Lei Han Xiao Zhengyi Fu State Key Lab of Advanced Technology for Material Synthesis and Processing Wuhan University of Technology Wuhan 430070 China

We proposed a new method, electroplating followed by spark plasma sintering（SPS）, to fabricate laminated TiB2-B4 C/Cu-Ni composites with high strength and high toughness. It is found that a thin intermediate Cu layer can effectively enhance the strength of the interface between the ceramics and the metals, resulting in a high flexural strength and toughness of the laminated TiB2-B4 C composites simultaneously. A flexural strength and fracture toughness of 651 MPa and 11.6 MPam^（1/2） respectively,are achieved, an approximately 90% improvement over TiB2-B4 C bulk.

关键词： Laminated structure Electroplating Spark plasma sintering B4C ceramic

来源：评论

学校读者我要写书评

暂无评论

Enhance the mechanical properties of CoCrFeNi(TiC)0.2 eutectic high-entropy alloy through carbide precipitation and partial recrystallization

引用

materials Science and Engineering: A 2025年 937卷

作者： Zhang, Jian Chen, Xiaohong Xiang, Wei Zhou, Zhiqiang Wei, Qinqin Xie, Pan Luo, Guoqiang Shen, Qiang State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Hubei Longzhong Laboratory Hubei Xiangyang441000 China School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China Innovation Institute for Ocean Materials Characterization Technology State Key Lab of Tropic Ocean Engineering Materials and Materials Evaluation Hainan University Hainan Province Haikou570228 China Chaozhou Branch of Chemistry and Chemical Engineering Guangdong Laboratory Chaozhou521000 China

The CoCrFeNi based alloys with high outstanding fracture toughness and thermal stability demonstrates significant potential for aerospace structural frameworks. However, the as-cast TiC enhanced CoCrFeNi alloy exhibits a poor yield strength, limiting its practical application as a structural material. This study proposes a thermomechanical treatment strategy to enhance the CoCrFeNi(TiC)0.2 alloy by utilizing carbide precipitates and partial recrystallization. The carbide precipitates, unrecovered dislocations, refined recrystallize grains, and twins simultaneously enhance the alloy through precipitation strengthening, dislocation strengthening, and grain boundary strengthening. After cold rolling and heat treating at 900 °C, the CoCrFeNi(TiC)0.2 alloy exhibits a high yield strength of 760 MPa, an ultimate tensile strength of 1100 MPa, and a uniform elongation of 14 %. The alloy demonstrates a relatively favorable strength-ductility balance, which is higher than that of reported carbide-reinforced CoCrFeNi alloys. The work offers theoretical guidance for preparing high-performance alloys, demonstrating significant potential for practical applications. © 2025 Elsevier B.V.

关键词： Tensile strength

来源：评论

学校读者我要写书评

暂无评论

Microstructure and Properties of AlN Coating/Graphite Fabricated via In-situ Reaction

引用

武汉理工大学学报(材料科学版) 2007年第4期22卷 718-721页

作者： JIA Tiekun WANG Weimin FU Zhengyi WANG Hao ZHAO Haiyang State Key Lab of Advanced Technology for Material Synthesis and Processing Wuhan University of Technology Wuhan430070 China

A novel method was used to fabricate AIN coating on graphite substrate. This approach included two steps: firstly, the emulsion composed of BN and anhydrous ethanol was sprayed on the surface of the graphite substrate; secondly, AIN coating was formed through the in-situ reaction of Al with the sprayed BN. The reaction was investigated by thermogravimetric-differential thermal analysis (TG-DTA), and the phase composition in the synthetic process was characterized by X-ray diffraction (XRD). Scanning electronic microscopy (SEM) was used to observe the morphology, and electron probe microanalysis (EPMA) was used to observe the distribution of the elements. The experimental results show that the AIN coating is dense and bonded with graphite tightly.

关键词： in-situ reaction AIN coating nitridation spray interface

来源：评论

学校读者我要写书评

暂无评论

Fluoridation and Sintering of Hydroxyapatite material and Their Mechanical Properties

引用

Journal of Wuhan University of technology(materials Science) 2014年第1期29卷 190-196页

作者： Muhammad Asif 付正义 WANG Weimin WANG Hao TAN Tiening Shahzad Ahmad Khan State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology

In the current work hydroxyapatite Ca10(PO4)6 ·OH2(HA) was sintered with the addition of 3 wt% aluminum isopropoxide(C9H21AlO3) powder and 3 wt % Teflon powder(-C2 F2-). Sample was prepared by following sol-gel technique. Obtained pellets of samples were sintered. For investigation of effects of temperature on microstructures and mechanical properties the samples were sintered at various temperatures. For studying the phase composition, microstructures and elemental analysis the sintered samples were characterized by X-rays diffraction(XRD), scanning electron microscopy(SEM) and energy dispersive X-rays diffraction(EDAX) respectively. After sintering the samples mechanical properties, i e, grains size, apparent density, Vickers hardness, bending strength and compressive strength were found to be 2.14-18.76 μm, 1.523 6-0.752 g/cm3, 3.60-0.600 GPa and bending strength 33.265 8-14.900 MPa, 75-33 MPa, respectively. As a result of sintering fluoridated composite material was obtained.

关键词： fluoridated hydroxyapatite pressureless sintering mechanical properties hydroxyapatite materials

来源：评论

学校读者我要写书评

暂无评论

Fabrication of Titanium Diboride-Cu Composite by Self-High Temperature synthesis plus Quick Press

引用

Journal of materials Science & technology 2005年第6期21卷 841-844页

作者： Jinyong ZHANG+, Zhengyi FU and Weimin WANGstate key lab of advanced technology for materials synthesis and processing, Wuhan University of technology, Wuhan 430070, China State Key Lab. of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China

Titanium diboride based composites, good candidates for contact materials, have high hardness, Young＇s modulus, high temperature stability, and excellent electrical, thermal conductivity. However a good interface of TiB2/Cu is very difficult to achieve for oxidation of TiB2. To avoid this oxidation behavior, the in situ combusting synthesis technology, SHS, was used to prepare TiB2/Cu composite. The characters of Ti-B-xCu SHS were studied in detail, such as combustion temperature, products phases and grain size. Based on the experimental results a proper technology way of self-high temperature synthesis plus quick press （SHS/QP） was determined and compact TiB2/Cu composites with relative density over than 97 pct of the theoretical were fabricated by this method. The properties and microstructures of these TiB2 based composites were also investigated.

关键词： Self-high temperature synthesis （SHS） TiB2 Composite

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：