TiCoSb-based half-Heusler compounds with the substitution of Zr for Ti have been prepared quickly by combining high-energy ball milling method with spark plasma sintering technique, and their thermal transport propert...
详细信息
TiCoSb-based half-Heusler compounds with the substitution of Zr for Ti have been prepared quickly by combining high-energy ball milling method with spark plasma sintering technique, and their thermal transport properties have been investigated. With the increase of the concentration of Zr, the thermal conductivity of Til-xZrxCoSb compounds decreases significantly. Compared with the thermal conductivity of TiCoSb compound, that of Ti0.5Zr0.5CoSb decreases by 200% at 1000 K.
To describe the real world which is a harmonious unification world with both de- terminism and randomness, we propose a harmonious unifying hybrid preferential model (HUHPM) of a certain class of complex dynamical net...
详细信息
To describe the real world which is a harmonious unification world with both de- terminism and randomness, we propose a harmonious unifying hybrid preferential model (HUHPM) of a certain class of complex dynamical networks. HUHPM is gov- erned only by the total hybrid ratio d/r according to the practical need. As some typical examples, the concepts and methods of the HUHPM are applied to the un-weighted BA model proposed by Barabási et al., the weighted BBV model pro- posed by Barat et al. and the weighted TDE model proposed by Wang et al. to get the so-called HUHPM-BA network, HUHPM-BBV network and HUHPM-TDE network. These HUHPM networks are investigated both analytically and numerically. It is found that the HUHPM reveals several universal properties, which more approach to the real-world networks for both un-weighted and weighted networks and have potential for applications.
Three-dimension reconstruction from serial sections has been used in the last decade to obtain information concerning three-dimensional microstructural ge-ometry. One of the crucial steps of three-dimension reconstruc...
详细信息
Three-dimension reconstruction from serial sections has been used in the last decade to obtain information concerning three-dimensional microstructural ge-ometry. One of the crucial steps of three-dimension reconstruction is getting compact and fairing grain contours. Based on the achievement of closed raw con-tours of ceramic composite grains by using wavelet and level set, an adaptive method is adopted for the polygonal approximation of the digitized raw contours. Instead of setting a fixed length of support region in advance, the novel method computes the suitable length of support region for each point to find the best es-timated curvature. The dominant points are identified as the points with local maximum estimated curvatures. Periodic closed B-spline approximation is used to find the most compact B-spline grain boundary contours within the given tolerance. A flexible distance selection approach is adopted to obtain the common knot vector of serial contours consisting of less knots that contain enough degrees of freedom to guarantee the existence of a B-spline curve interpolating each contour. Finally, a B-spline surface interpolating the serial contours is generated via B-spline surface skinning.
Nanocomposite WC-10Co powder produced by spray pyrolysis-continuous reduction & carbonization technology and cubic boron nitride (CBN) plated with titanium by vacuum vapor deposit were used, and this paper adopted...
详细信息
Nanocomposite WC-10Co powder produced by spray pyrolysis-continuous reduction & carbonization technology and cubic boron nitride (CBN) plated with titanium by vacuum vapor deposit were used, and this paper adopted spark plasma sintering (SPS) process to prepare CBN enhanced ultrafine WC-10Co cemented carbide cermets composite material. The microstructure and mechanical properties of CBN-WC-10Co composites were investigated. The results show that CBN-WC-10Co composites consolidated by spark plasma sintering can reach 95.0 % relative density, and transverse rupture strength (TRS) is 1050 MPa, the average grain size of cermets matrix is less than 420 nm, and CBN-WC-10Co composites with excellent properties are achieved. The CBN still remains very good crystal shape after 1240°C spark plasma sintering, and there is not obvious clearance between CBN plated with titanium and the cermets matrix, the coated titanium layer can not only improve the thermal stability of CBN, but also increase the properties of CBN-WC-10Co composites.
In this study, SnO2-based ceramics, with 0.5%CuO as sintering aid and Sb2O3 as activator of the electrical conductivity, was obtained by pressureless sintering at 1450°C for 5 h. Densification behavior and micros...
详细信息
In this study, SnO2-based ceramics, with 0.5%CuO as sintering aid and Sb2O3 as activator of the electrical conductivity, was obtained by pressureless sintering at 1450°C for 5 h. Densification behavior and microstructure development strongly depend on Sb2O 3. The characteristization of microstructures on Sb2O 3 concentrations are analyzed by SEM. A small amount of CuO improves densification;Sb2O3 retards the densification of SnO 2-based ceramic. The electrical resistivities of SnO 2-based ceramics with different contents of Sb2O 3 are measured by the standard four probe method and varied in a wide range. The electrical resistivity arrives the minimal value of 4.964×10-2 Ω·cm for 99%SnO2+0.5%CuO +0.5%Sb2O3. More content of Sb2O3 than that of CuO causes the degression of density and the increasing of electrical resistivity of ceramics.
MoSi2 is one of the few intermetallics to have potential for farther systems. However, the use of MoSi2 has been hindered due to the brittle nature of the material at low temperatures, inadequate creep resistance at h...
详细信息
MoSi2 is one of the few intermetallics to have potential for farther systems. However, the use of MoSi2 has been hindered due to the brittle nature of the material at low temperatures, inadequate creep resistance at high temperatures, accelerated (pest) oxidation at temperatures between 450-550°C. In this investigation Mo(Al,Si2)/Ti 3SiC2 composites has been prepared by reaction hot-pressing from Mo, Si, SiC, Ti, Al powder mixture under different temperatures. XRD results show that the main products are Mo(Si,Al)2 and Ti3SiC2. Part of TiC and SiC also appeared at low treating temperature. With the treating temperature increasing SiC disappeared. No evidence show lattice change of Mo(Si,Al)2. It must be the results of sufficient Al added. The electrical conductivity properties were also investigated. Samples treating under different temperatures showed different changes. Samples under high treating temperature showed a near linear change ranging from 27∼800°C and Samples under low treating temperature showed a nonlinear change.
The reaction mechanism of silicon and iron composite powders was clarified during the fabrication of high silicon iron sheet with the Si-content of 6.5wt% by Direct Powder Rolling (DPR) technique. The changes of phase...
详细信息
The reaction mechanism of silicon and iron composite powders was clarified during the fabrication of high silicon iron sheet with the Si-content of 6.5wt% by Direct Powder Rolling (DPR) technique. The changes of phase composition and structure evolvement were mainly studied, It is found that a local graded structure, Fe-Fe(Si)-Fe3Si(Si)-Si, forms when sintering at 950-10007deg;C, which plays an important role in the DPR process. Fe 3Si(Si) phase keeps higher content of Si, and Fe(Si) phase remains the state with much lower Si-content, thus provides good mechanical proprieties of rolling and cutting. Then, the subsequent sintering at about 1200C improves the density and makes the distribution of Si homogeneous in the final high silicon iron sheets.
Translucent AlN ceramics were fabricated using spark plasma sintering (SPS) technique with 3wt% CaF2 as sintering additive. The samples achieved 52.4% maximum transmittance in medium IR region after 10 min holding tim...
详细信息
Translucent AlN ceramics were fabricated using spark plasma sintering (SPS) technique with 3wt% CaF2 as sintering additive. The samples achieved 52.4% maximum transmittance in medium IR region after 10 min holding time by spark plasma sintering at 1800°C and 30 MPa pressure in N2. The results from XRD, SEM, TEM and EDX showed that the sintered bodies were densely compacted and highly pure with fine grain size and uniform microstructures. No secondary phases were observed at the grain boundaries and triple grain junctions, which guaranteed good optical property of the sintered bodies.
A novel water-based magnetorheological (MR) suspension is based on the poly(ethy1ene glycol)-coated carbonyl iron particles, which is prepared by the co-sol-gel reaction using carbonyl iron particles as raw materials,...
详细信息
ISBN:
(纸本)9812771190
A novel water-based magnetorheological (MR) suspension is based on the poly(ethy1ene glycol)-coated carbonyl iron particles, which is prepared by the co-sol-gel reaction using carbonyl iron particles as raw materials, and water without any other additive. The microshucture, anti-oxidation properties, magnetic and magnetorheological properties of the core-shell particles are characterized by scanning electronic microscopy, transmission electronic microscopy, Fourier transform infrared spectroscopy, thermogravimetric- differential thermal analysis, vibrating sample magnetometer, and ARES2000 rheometer, respectively. The results show that the as prepared particles have core-shell structure with a polymer shell of less than 100 nm and its anti-oxidation property is enhanced due to the compound coating. Both the core-shell particles and its based MR suspension exhibit excellent soft magnetic performance. The based MR suspension shows low zero viscosity and high MR effects, especially greatly improved anti-settlement and redispersibility. The phenomena are attributed to the hydrophilic thin shell of the core-shell particles.
In the present study, α-Si3N4 is prepared by using MgO and Al2O3 as the sintering additives and spark plasma sintering (SPS) technique. The SPS sintering mechanism is discussed. The relationship between the content o...
详细信息
In the present study, α-Si3N4 is prepared by using MgO and Al2O3 as the sintering additives and spark plasma sintering (SPS) technique. The SPS sintering mechanism is discussed. The relationship between the content of sintering additives, sintering temperature and relative densities of the samples is analyzed. The results suggest that when the sintering temperature is 1300-1500°C, the content of sintering additives is 6wt.%-10wt.%, the relative density of sintered samples is 64%-96%. When the sintering temperature reaches 1400°C, the content of sintering additives is 10%, the samples can be fully dense sintered and the relative density can be up to 95%. The sintering mechanism is liquid phase sintering. The bending strength of the sintered samples is 50-403MPa and has a close correlation with the relative density.
暂无评论