检索结果-内蒙古大学图书馆

Mussel-inspired Methacrylic Gelatin-dopamine/Ag Nanoparticles/Graphene Oxide Hydrogels with Improved Adhesive and Antibacterial Properties for Applications as Wound Dressings

引用

Journal of Wuhan University of technology(materials Science) 2024年第2期39卷 512-521页

作者：宿正楠 HU Yanru MENG Lihui OUYANG Zhiyuan LI Wenchao ZHU Fang XIE Bin 吴庆知 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Biomedical Material and Engineering Center of Hubei ProvinceWuhan University of TechnologyWuhan 430070China

A novel strategy was developed to prepare the methacrylic gelatin-dopamine(GelMA-DA)/Ag nanoparticles(NPs)/graphene oxide(GO) composite hydrogels with good biocompatibility,mechanical properties,and antibacterial ***-inspired DA was utilized to modify the GelMA molecules,which imparts good adhesive performance to the ***,interfacial enhancer,not only improves mechanical properties of the hydrogels,but also provides anchor sites for loading Ag NPs through numerous oxygencontaining functional groups on the *** experimental results show that the GelMA/Ag NPs/GO hydrogels have good biocompatibility,and exhibit a swelling rate of 202±16%,the lap shear strength of 147±17 kPa,and compressive modulus of 136±53 kPa,in the case of the Ag NPs/GO content of 2 mg/*** activity of the hydrogels against both gram-negative and gram-positive bacteria is dependent on the Ag NPs/GO content derived from the release of Ag^(+).Furthermore,the GelMA/Ag NPs/GO hydrogels possess good adhesive ability,which is resistant to highly twisted state when stuck on the surface of *** results demonstrate promising potential of the GelMA-DA/Ag NPs/GO hydrogels as wound dressings for biomedical applications in clinical and emergent treatment.

关键词： GelMA dopamine,graphene oxide adhesion antibacterial ability

来源：评论

学校读者我要写书评

暂无评论

Photo-responsive Carboxymethyl Chitosan/Laponite Hydrogel as a Potential Spinal Cord Injury Scaffold:Characterization and Cytocompatibility Study

引用

Journal of Wuhan University of technology(materials Science) 2024年第6期39卷 1628-1636页

作者： Jayanti Parajuli LI Yongtao CHANG Likun YE Liyuan HAN Yingchao YIN Yixia State Key Laboratory of Advanced Technology for Material Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Biomedical Materials and Engineering Research Center of Hubei Province Wuhan University of TechnologyWuhan 430070China

We synthesized photo-responsive carboxymethyl chitosan(CMC-MA)via free radical polymerization and utilized nanoclay laponite(LAP)as an inorganic crosslinking agent to develop an injectable and 3D-printable CMC-MA/LAP *** determined the optimal ratio of 2.5 w/v%CMC-MA/7.5 w/v%LAP based on injection molding,compression modulus,swelling properties,rheological properties,and 3D printing properties of the hydrogel ***-vitro cytocompatibility experiments showed that both CMC-MA and CMC-MA/LAP hydrogel had no inhibitory effect on cell proliferation and can promote cell growth when cultured on the surface of the hydrogel ***,the hydrogel containing LAP particles significantly facilitated cell adhesion(>60%)compared with the hydrogel without LAP(20%).Our findings demonstrate that the CMC-MA/LAP hydrogel has great potential for tissue repair in neural tissue engineering.

关键词： neural injectable hydrogels spinal cord injury CMC-MA/LAP hydrogel cytocompatibility

来源：评论

学校读者我要写书评

暂无评论

Enhanced breakdown strength of BaTiO_(3)-based multilayer ceramic capacitor by structural optimization

引用

Rare Metals 2023年第8期42卷 2552-2561页

作者： Qian Liu Hua Hao Qing-Hu Guo Zhong-Hui Shen Jian Wang Ming-He Cao Zhong-Hua Yao Han-Xing Liu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Material Science and EngineeringWuhan University of TechnologyWuhan 430070China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Foshan 528220China Sanya Science and Education Innovation Park of Wuhan University of Technology Sanya 572000China International School of Material Science and Engineering Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Center of Smart Materials and DevicesWuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing International School of Material Science and EngineeringWuhan University of TechnologyWuhan 430070China

0.5 wt%Nb_(2)O_(5)doped 0.12BiAlO_(3)-0.88BaTiO_(3)(12BA5N)multilayer ceramic capacitor(MLCC-1)was prepared,which satisfied EIA X7R specification(where X is the minimum temperature,R is the percentage of capacitance variation limit)at 1 *** distribution of internal electric field under breakdown voltage was simulated by finite element method(FEM),indicating that the electric field strength increased significantly at the terminal of internal *** areas may become the headstream of breakdown for MLCC-1 due to the shape *** order to improve the breakdown performance of MLCC-1,it was optimized by 12BA5N+2G green sheets(prepared by 12BA5N ceramic powder with 2 wt%B-Al-Si glass additive),then MLCC-2 was obtained which satisfied EIA X8R *** BDS rose from 20 to29.4 kV·mm^(-1),and the electric field distribution of dielectric layer was also analyzed by ***,it was also found that the grain size and the dielectric constants of"core"and"shell"parts for the 12BA5N+2G dielectric layer both contributed to the enhanced BDS of MLCC-2according to the simulation results from FEM.

关键词： Multilayer ceramic capacitor(MLCC) Breakdown strength(BDS) Simulation Grain size Dielectric constant

来源：评论

学校读者我要写书评

暂无评论

synthesis of magnetic targeted delivery microcapsules and its anti-corrosion self-healing behavior in epoxy resin coatings

引用

Corrosion Communications 2023年第2期10卷 27-37页

作者： Yingxiang Ma Dan Jiang Yuping Yang Li Ma Jian Zhou Guosheng Huang Cunguo Lin State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology State Key Laboratory for Marine Corrosion and Protection Luoyang Ship Material Research Institute

This study proposed a tung-oil based magnetic targeted delivery microcapsules （MDTMs） to enhance the efficiency of self-healing coatings （SHC）.Magnetic particles were used as function particles and emulsifier in synthesis of microcapsules （MC）.DSC,OM,SEM,TEM,VSM,NSS,EIS and SKP were used to characterize the compounds,structure,healing behavior and anti-corrosion *** indicate that magnetically driven SHC （MD-SHC） reduces 50%migration path of the released tung oil,and increases the release rate of tung oil after the coating is mechanically *** and EIS results suggest that the healing part has impressive anti-corrosion performance,scratches were filled with a large amount of tung oil in a short time,and the released tung oil had formed a complete oil film on scratches at 24 h with higher polarization resistance （Rp）.Rpof MD-SHC（2.5×10～5–3.6×10～5Ωcm2） is 2.0–2.8 times of that the SHC （1.1×10～5–1.8×10～5Ωcm2）.The enrichment in MD-SHC at the interface decreases bonding strength from 7 to 4.5 MPa as the mass additive of microcapsules reaches 15 wt.%.The current work proves the effectiveness of MD-SHC in improving self-healing ability.

关键词： Self-healing coatings Corrosion Microcapsules Magnetic particle Electrochemical impedance spectroscopy

来源：评论

学校读者我要写书评

暂无评论

Exploring the Core-shell Structure of BaTiO3-based Dielectric Ceramics Using Machine Learning Models and Interpretability Analysis

引用

Journal of Wuhan University of technology(materials Science) 2024年第3期39卷 561-569页

作者：孙家乐 XIONG Peifeng 郝华 LIU Hanxing State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Material Science and EngineeringInternational School of Material Science and EngineeringWuhan University of TechnologyWuhan 430070China Sanya Science and Education Innovation Park Wuhan University of TechnologySanya 572000China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan 528200China

A machine learning(ML)-based random forest(RF)classification model algorithm was employed to investigate the main factors affecting the formation of the core-shell structure of BaTiO_(3)-based ceramics and their interpretability was analyzed by using Shapley additive explanations(SHAP).An F1-score changed from 0.8795 to 0.9310,accuracy from 0.8450 to 0.9070,precision from 0.8714 to 0.9000,recall from 0.8929 to 0.9643,and ROC/AUC value of 0.97±0.03 was achieved by the RF classification with the optimal set of features containing only 5 features,demonstrating the high accuracy of our model and its high *** the interpretability analysis of the model,it was found that the electronegativity,melting point,and sintering temperature of the dopant contribute highly to the formation of the core-shell structure,and based on these characteristics,specific ranges were delineated and twelve elements were finally obtained that met all the requirements,namely Si,Sc,Mn,Fe,Co,Ni,Pd,Er,Tm,Lu,Pa,and *** the process of exploring the structure of the core-shell,the doping elements can be effectively localized to be selected by choosing the range of features.

关键词： machine learning BaTiO_(3) core-shell structure random forest classifier

来源：评论

学校读者我要写书评

暂无评论

Single-Atom Lithiophilic Sites Confined within Ordered Porous Carbon for Ultrastable Lithium Metal Anodes

引用

Energy & Environmental materials 2023年第3期6卷 366-372页

作者： Wenzhong Huang Shanlin Liu Ruohan Yu Liang Zhou Zhenhui Liu Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Nanostructure Research Centre Wuhan University of TechnologyWuhan 430070China College of Material Science and Engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu hydrogen ValleyFoshan 528200China

Attributing to the high specific capacity and low electrochemical reduction potential,lithium(Li)metal is regarded as the most promising anode for high-energy Li ***,the growth of lithium dendrites and huge volume change seriously limit the development of lithium metal *** overcome these challenges,an ordered mesoporous N-doped carbon with lithiophilic single atoms is proposed to induce uniform nucleation and deposition of Li *** from the synergistic effects of interconnected three-dimensional ordered mesoporous structures and abundant lithiophilic single-atom sites,regulated local current density and rapid mass transfer can be achieved,leading to the uniform Li deposition with inhibition of dendrites and buffered volume *** a result,the as-fabricated anode exhibits a high CE of 99.8%for 200 cycles.A stable voltage hysteresis of 14 mV at 5 mA cm^(−2)could be maintained for more than 1330 h in the symmetric ***,the full cell coupled with commercial LiFePO_(4)exhibits high reversible capacity of 108 mAh g^(−1)and average Coulombic efficiency of 99.8%from 5th to 350th cycles at 1 *** ordered mesoporous carbon host with abundant lithiophilic single-atom sites delivers new inspirations into rational design of high-performance Li metal anodes.

关键词： lithiophilic lithium metal battery ordered mesoporous carbon single atom

来源：评论

学校读者我要写书评

暂无评论

Efficient flexible perovskite solar cells and modules using a stable SnO_(2)-nanocrystal isopropanol dispersion

引用

Nano Research 2024年第4期17卷 2704-2711页

作者： Zhiwei Su Jing Li Ruixuan Jiang Shujie Zhang Chengkai Jin Feng Ye Bingcan Ke Mengjun Zhou Jinhui Tong Hyesung Park Fuzhi Huang Yi-Bing Cheng Tongle Bu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Material Science and Engineering Wuhan University of TechnologyWuhan 430070China Department of Materials Science and Engineering Graduate School of Semiconductor Materials and Devices EngineeringGraduate School of Carbon NeutralityLow Dimensional Carbon Materials CenterUlsan National Institute of Science and TechnologyUlsan 44919Republic of Korea Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Foshan 528200China

The outstanding advantages of lightweight and flexibility enable flexible perovskite solar cells(PSCs)to have great application potential in mobile energy *** to the low cost,low-temperature processibility,and high electron mobility,SnO_(2) nanocrystals have been widely employed as the electron transport layer in flexible *** prepare high-quality SnO_(2) layers,a monodispersed nanocrystal solution is normally ***,the SnO_(2) nanocrystals can easily aggregate,especially after long periods of ***,we develop a green and cost-effective strategy for the synthesis of high-quality SnO_(2) nanocrystals at low temperatures by introducing small molecules of glycerol,obtaining a stable and well-dispersed SnO_(2)-nanocrystal isopropanol dispersion *** to the enhanced dispersity and super wettability of this alcohol-based SnO_(2)-nanocrystal solution,large-area smooth and dense SnO_(2) films are easily deposited on the plastic conductive ***,this contributes to effective charge transfer and suppressed non-radiative recombination at the interface between the SnO_(2) and perovskite *** a result,a greatly enhanced power conversion efficiency(PCE)of 21.8%from 19.2%is achieved for small-area flexible PSCs.A large-area 5 cm×5 cm flexible perovskite solar mini-module with a champion PCE of 16.5%and good stability is also demonstrated via this glycerol-modified SnO_(2)-nanocrystal isopropanol dispersion approach.

关键词： tin oxide isopropanol dispersion colloid stability flexible perovskite solar cells

来源：评论

学校读者我要写书评

暂无评论

Nitrogen doped porous carbon-based bifunctional oxygen electrocatalyst with controllable phosphorus content for zinc-air battery

引用

Nano Research 2023年第4期16卷 5887-5893页

作者： Shichang Cai Zihan Meng Gaojie Li Yu An Yapeng Cheng Erjun Kan Bo Ouyang Haining Zhang Haolin Tang School of Material Science and Engineering Henan University of TechnologyZhengzhou 450001China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong LaboratoryXianhu Hydrogen ValleyFoshan 528200China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Applied Physics and Institution of Energy and Microstructure Nanjing University of Science and TechnologyNanjing 210094China

The controllable construction of non-noble metal based bifunctional catalysts with high activities towards oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)is of great significance,but remains a ***,we reported an effective method to synthesize cobalt-nitrogen doped mesoporous carbon-based bifunctional oxygen electrocatalyst with controllable phosphorus content(Co-N-P_(X)-MC,X=0.5,1.0,1.5,2.0).The mesoporous carbon substrate endowed the asprepared samples with more exposed active surface(236.50 m^(2)·g^(−1))and the most appropriate doping ratio of phosphorus had been investigated to be 1.5(Co-N-P1.5-MC).For ORR,Co-N-P1.5-MC exhibited excellent catalytic activity with more positive onset potential(1.01 V)and half-wave potential(0.84 V)than the other *** OER,Co-N-P1.5-MC also showed a low overpotential of 415 *** experimental results and density-functional theory(DFT)calculations,the outstanding bifunctional catalytic performance of Co-N-P1.5-MC was due to the synergistic cooperation between the P and N dopants,which could reduce the reaction barriers and was favorable for ORR and ***,the Zn-air battery using Co-N-P1.5-MC as the cathode showed remarkable battery performance with high stability(could operate stably for over 160 h at 10 mA·cm^(−2))and maximum power density(119 mW·cm^(−2)),demonstrating its potential for practical *** work could provide significant enlightenment towards the design and construction of bifunctional oxygen electrocatalyst for next-generation electrochemical devices.

关键词： cobalt-nitrogen doped porous carbon phosphorus doping bifunctional electrocatalyst oxygen reduction reaction(ORR)and oxygen evolution reaction(OER) Zn-air battery

来源：评论

学校读者我要写书评

暂无评论

Regulating energy storage performances of 0.85NaNbO_(3)-0.15Bi(Zn_(2/3)Nb_(1/3))O_(3) ceramics using BaTiO_(3)

引用

Journal of Materiomics 2022年第1期8卷 166-173页

作者： Dongyu Lai Zhonghua Yao Wei You Biao Gao Qinghu Guo Ping Lu Amjad Ullah Hua Hao Minghe Cao Hanxing Liu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Material Science and EngineeringWuhan University of TechnologyWuhan430070China International School of Material Science and Engineering Wuhan University of TechnologyWuhan430070China

Recently,NaNbO_(3)-based ceramics with excellent energy storage performances(ESPs)and fast chargedischarge characteristics have attracted great *** this case,BaTiO_(3) modified 0.85NaNbO_(3)-0.15Bi(Zn_(2/3)Nb_(1/3))O_(3)(0.85NN-0.15BZN-yBT)ceramics were designed and successfully fabricated using solid state *** discharge storage density of the ceramics increases from 1.22 J/cm^(3) at y=0-1.84 J/cm^(3) at y=8%,which is 1.5 times higher than pure 0.85NN-0.15BZN *** ceramic reveals excellent temperature stability up to 150℃,good discharge cycling after 10^(5) cycles and high discharge speed of 2.0μs,broadening the scope of NaNbO_(3)-based ceramics for energy storage applications.

关键词： Perovskites Ceramics Dielectric properties Energy storage Capacitors

来源：评论

学校读者我要写书评

暂无评论

Tailoring lithium intercalation pathway in 2D van der Waals heterostructure for high-speed edge-contacted floating-gate transistor and artificial synapses

引用

InfoMat 2024年第10期6卷 53-64页

作者： Jun Yu Jiawei Fu Hongcheng Ruan Han Wang Yimeng Yu Jinpeng Wang Yuhui He Jinsong Wu Fuwei Zhuge Ying Ma Tianyou Zhai State Key Laboratory of Materials Processing and Die and Mould Technology School of Material Science and EngineeringHuazhong University of Science and Technology(HUST)Wuhanthe People's Republic of China Hubei Yangtze Memory Laboratory School of Integrated CircuitsHuazhong University of Science and Technology(HUST)Wuhanthe People's Republic of China School of Information Engineering Zhongnan University of Economics and LawWuhanthe People's Republic of China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Nanostructure Research CenterWuhan University of TechnologyWuhanthe People's Republic of China Optics Valley Laboratory Hubeithe People's Republic of China

Local phase transition in transition metal dichalcogenides (TMDCs) by lithiumintercalation enables the fabrication of high-quality contact interfaces in twodimensional(2D) electronic devices. However, controlling the intercalation oflithium is hitherto challenging in vertically stacked van der Waalsheterostructures (vdWHs) due to the random diffusion of lithium ions in thehetero-interface, which hinders their application for contact engineering of 2DvdWHs devices. Herein, a strategy to restrict the lithium intercalation pathwayin vdWHs is developed by using surface-permeation assisted intercalationwhile sealing all edges, based on which a high-performance edge-contact MoS_(2)vdWHs floating-gate transistor is demonstrated. Our method avoids intercalationfrom edges that are prone to be random but intentionally promotes lithiumintercalation from the top surface. The derived MoS_(2) floating-gatetransistor exhibits improved interface quality and significantly reduced subthresholdswing (SS) from >600 to 100 mV dec^(–1). In addition, ultrafast program/erase performance together with well-distinguished 32 memory statesare demonstrated, making it a promising candidate for low-power artificialsynapses. The study on controlling the lithium intercalation pathways in 2DvdWHs offers a viable route toward high-performance 2D electronics for memoryand neuromorphic computing purposes.

关键词： 2D vdW heterostructure high-speed floating-gate transistor interlayer lithium intercalation engineering phase-engineered contact

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：