Many reports related with alkali treatment on coir of coconut are available but the data related with the stress-strain curve is not provided. In this research stress-strain curve of tensile test data of the coconut s...
详细信息
Many reports related with alkali treatment on coir of coconut are available but the data related with the stress-strain curve is not provided. In this research stress-strain curve of tensile test data of the coconut single fiber obtained from alkali treatment with 5% NaOH is provided. Seven repetitions was conducted. The results indicate that the fiber is linier elastic with no indication as ductile material. The average of tensile strength is 130.9 MPa, failure (maximum) strain is 22.4 % and modulus of elasticity is 681.4 MPa. Randomly addition of 3 cm length of coconut fiber with fraction 15% in to the unsaturated polyester give maximum reinforcement that reach tensile strength of the composite about 24.5 MPa
The material of aluminum and the gray cast iron are widely used, so that also produce a large scale of waste from the manufacturing processes. In relation with supporting the global program of sustainable recycling-or...
详细信息
The material of aluminum and the gray cast iron are widely used, so that also produce a large scale of waste from the manufacturing processes. In relation with supporting the global program of sustainable recycling-oriented society, the waste of aluminium and gray cast iron chips will be utilized in this research to become a valuable, functional and useful material. The waste of gray cast iron chips and aluminum chips were used in this research. Three compositions were provided in this research namely, composition of Al chips with addition 0, 20, and 40 vol.% of gray cast iron chips. The process was initiated by compacting the chips to become a billet with 70 mm length and 60 mm in diameter. The hot extrusion was carried out at 400°C with pressure at 500 Ton. The lubricant that was used at the die was MoS 2 , mean while the graphite colloid was utilized as lubricant at main cylinder of extrusion. Final diameter of the product was 15 mm. The process then was continued with swaging the specimens. The process of swaging was done following 3 steps in room temperature, initiated by swaging from 15 mm to become 14 mm, continued by swaging until reach 12.5 mm and finally by swaging the specimen until reach 11 mm in diameter. The hammering vibration test then was carried out to obtain the damping capacity of the specimen with length of the specimen at 150 mm and 11 mm in diameter. For specimen with composition 0% gray cast iron, the value of damping capacity (α) is found 45[s -1 ]. For specimen with composition 20% gray cast iron, the value of damping capacity is found 61 [s -1 ]. The damping capacity for the specimen with composition 40% gray cast iron is found very hight that reach up to 90 [s -1 ]
暂无评论