检索结果-内蒙古大学图书馆

SSRN 2022年

作者： Al-Subari, Lutf Hilal, Adnan Ekinci, Abdullah Sustainable Environment and Energy Systems Program Middle East Technical University Northern Cyprus Campus Kalkanli via Mersin 10 North Cyprus Guzelyurt Turkey Civil Engineering Program Middle East Technical University Northern Cyprus Campus Kalkanli via Mersin 10 North Cyprus Guzelyurt Turkey

Environmental measures show that the effect of global temperature rise goes beyond the natural cycle of the Earth’s environmental system, which affects the social, economical, and health conditions of humanity. In this respect, initially, the UN’s sustainable development goals were adopted where, more recently, a UN net-zero coalition was formed to cut greenhouse gas emissions to as close to zero as possible by 2050 to resist foreseen catastrophic outcomes. As a result of these overwhelming goals and regulations, many nations are setting policies to achieve those targets. Nevertheless, such targets, to the best of our knowledge, have not penetrated well into construction applications. In this study, in addition to the mechanical responses of three different waste additives (bottom ash, marble dust and tire rubber powder to replace cement to stabilize problematic soils, a life-cycle assessment was performed to evaluate environmental impacts. Furthermore, a novel impact-performance approach has been introduced to satisfy safety, performance, and sustainability criteria. In this respect, unconfined compressive strength (UCS), initial stiffness (G 0 ), accumulated loss of mass (ALM) due to wet-dry cycles, and life-cycle analysis (LCA) were performed on artificially cemented (7%, 10%, and 13%) clay specimens, compacted at 1600 and 1800 kg/m 3 and cured for 28 days. Further, bottom ash (BA) (10% and 20%), marble dust (MD) (20% and 40%), and tire rubber powder (TRP) (2.5%, 5%, 10%, and 20%) were used to replace the cement, which is known for its great environmental impact. It is reported in this study that 2.5% TRP replacement of cement at low density seems to be the optimum dosage and additive, among others, to provide the best performance (UCS, G 0 , and ALM). Furthermore, the increase in cement content and density results in a positive contribution to performance indicators and a negative contribution to environmental impact. However, when impact-performance is consider

关键词： sustainable development

来源：评论

学校读者我要写书评

暂无评论

Expansion cooling prospects for large scale applications

引用

International Journal of Thermofluids 2023年 20卷

作者： Alami, Abdul Hai Alrashid, Rashid Mdallal, Ayman Yasin, Ahmad Ayoub, Mohamad Alasad, Shamma Aljaghoub, Haya Alashkar, Adnan Abdelkareem, Mohammad Ali Olabi, Abdul Ghani Orhan, Mehmet Department of Sustainable and Renewable Energy Engineering University of Sharjah P.O. Box 27272 Sharjah United Arab Emirates Sustainable Energy and Power Systems Research Centre RISE University of Sharjah P.O. Box 27272 Sharjah United Arab Emirates Department of Mechanical Engineering American University of Sharjah P.O. Box 26666 Sharjah United Arab Emirates Department of Mechatronics Engineering American University of Sharjah P.O. Box 26666 Sharjah United Arab Emirates Department of Industrial Engineering and Engineering Management University of Sharjah P.O. Box 27272 Sharjah United Arab Emirates Materials Science and Engineering PhD Program American University of Sharjah P.O. Box 26666 Sharjah United Arab Emirates Chemical Engineering Department Minia University Elminia Egypt Mechanical Engineering and Design School of Engineering and Applied Science Aston University Aston Triangle BirminghamB4 7ET United Kingdom

Air conditioning in general and cooling in particular are the biggest energy sinks among all electricity consumers. Mitigating energy needs of this sector by active or passive means is a necessity. This paper offers a comprehensive review of various cooling technologies for large scale applications and compares them in terms of economy, environmental footprint and most importantly, energy requirements. There is a main focus on the potential of using expansion cooling, which is defined in conjunction with cooling effects generated during the expansion process of a gas. The interest in such cooling technology stems from the double benefit of utilizing a large-scale compressed air energy storage (CAES) system that can also provide cooling via the expansion of air. This consequently manifests in reducing the electrical demand required for cooling applications. Such a concept is beneficial for hot climates, where most of the electrical demand is reserved for offsetting the cooling load. © 2023 The Author(s)

关键词： Compressed air energy storage

来源：评论

学校读者我要写书评

暂无评论

Integrating of electrocoagulation process with submerged membrane bioreactor for wastewater treatment under low voltage gradients

引用

Chemosphere 2023年第1期339卷 139693页

作者： Bani-Melhem, Khalid Elektorowicz, Maria Tawalbeh, Muhammad Al Bsoul, Abeer El Gendy, Ahmed Kamyab, Hesam Yusuf, Mohammad . Qatar University P.O. Box 2713 Doha Qatar Dept. of Building Civil and Environmental Engineering Concordia University 1455 Blvd de Maisonneuve W. MontrealQCH3G 1M8 Canada Sustainable and Renewable Energy Engineering Department University of Sharjah P.O. Box 27272 Sharjah United Arab Emirates Sustainable Energy & Power Systems Research Centre RISE University of Sharjah P.O. Box 27272 Sharjah United Arab Emirates Al-Balqa Applied University Al-Huson University College Department of Chemical Engineering Jordan Environmental Engineering Program Department of Construction and Architectural Engineering School of Sciences and Engineering The American University in Cairo New Cairo Egypt Faculty of Architecture and Urbanism UTE University Calle Rumipamba S/N and Bourgeois Quito Ecuador Department of Biomaterials Saveetha Dental College and Hospital Saveetha Institute of Medical and Technical Sciences Chennai600 077 India Faculty of Chemical and Energy Engineering Faculty of Engineering Universiti Teknologi Malaysia Johor Skudai Malaysia Institute of Hydrocarbon Recovery Universiti Teknologi PETRONAS Perak Bandar Seri Iskandar32610 Malaysia

Treating and reusing wastewater has become an essential aspect of water management worldwide. However, the increase in emerging pollutants such as polycyclic aromatic hydrocarbons (PAHs), which are presented in wastewater from various sources like industry, roads, and household waste, makes their removal difficult due to their low concentration, stability, and ability to combine with other organic substances. Therefore, treating a low load of wastewater is an attractive option. The study aimed to address membrane fouling in the submerged membrane bioreactor (SMBR) used for wastewater treatment. An aluminum electrocoagulation (EC) device was combined with SMBR as a pre-treatment to reduce fouling. The EC-SMBR process was compared with a conventional SMBR without EC, fed with real grey water. To prevent impeding biological growth, low voltage gradients were utilized in the EC deviceThe comparison was conducted over 60 days with constant transmembrane pressure and infinite solid retention time (SRT). In phase I, when the EC device was operated at a low voltage gradient (0.64 V/cm), no significant improvement in the pollutants removal was observed in terms of color, turbidity, and chemical oxygen demand (COD). Nevertheless, during phase II, a voltage gradient of 1.26 V/cm achieved up to 100%, 99.7%, 92%, 94.1%, and 96.5% removals in the EC-SMBR process in comparison with 95.1%, 95.4%, 85%, 91.7% and 74.2% removals in the SMBR process for turbidity, color, COD, ammonia nitrogen (NH3–N), total phosphorus (TP), respectively. SMBR showed better anionic surfactant (AS) removal than EC-SMBR. A voltage gradient of 0.64 V/cm in the EC unit significantly reduced fouling by 23.7%, while 1.26 V/cm showed inconsistent results. Accumulation of Al ions negatively affected membrane performance. Low voltage gradients in EC can control SMBR fouling if Al concentration is controlled. Future research should investigate EC-SMBR with constant membrane flux for large-scale applications, cons

关键词： Chemical oxygen demand

来源：评论

学校读者我要写书评

暂无评论

Ensiling treatment of rice straw with cow paunch content to enhance bioethanol production

引用

Case Studies in Chemical and Environmental engineering 2024年 10卷

作者： Ludfiani, Dini Dwi Arianti, Forita Dyah Pertiwi, Miranti Dian Prasetyo, Teguh Djarot, Ira Nurhayati Santoso, Arif Dwi Sasongko, Nugroho Adi Astuti, Widi Research Center for Sustainable Production Systems and Life Cycle Assessment National Research and Innovation Agency (BRIN) Prof. BJ. Habibie Complex Area Tangerang Selatan Banten 15314 Indonesia Energy Security Graduate Program Republic of Indonesia Defense University (UNHAN RI) IPSC Sentul Area West Java Bogor 16810 Indonesia Chemical Engineering Department Universitas Negeri Semarang Central Java Semarang 50229 Indonesia

Every year, the production of rice straw and cow paunch content is abundant and 80 % of them has not been utilized. This study aimed to determine the potency of ensiling treatment on them in producing bioethanol. The novelty of this study is the utilization of cow paunch content as biomass and source of microbial fiber degradation. In this study, there were six groups of treatments. Bioethanol fermentation used Saccharomyces cerevisiae. Results, ensiling treatment significantly affected (p < 0.001) the changed chemical composition of them and produce ethanol of 40.13–102.84 mg/L. Conclude, ensiling treatment was considered effective ratio for bioethanol production. © 2024

关键词： Bioethanol Paunch content Rice straw

来源：评论

学校读者我要写书评

暂无评论

Cufe2o4@Ncnts-Functionalized Ceramic Microfiltration Membrane for Antibiotic Oxidation and Fouling Control Via Heterogeneous Electro-Fenton Reaction

SSRN

引用

SSRN 2024年

作者： Zhang, Zixin Huang, Guohe Li, Yongping Yao, Yao Zhang, Peng Chen, Xiujuan Ren, Shaojie Luo, Yifei Zhang, Yuanzheng State Key Joint Laboratory of Environmental Simulation and Pollution Control School of Environment Beijing Normal University Beijing100875 China State Key Joint Laboratory of Environmental Simulation and Pollution Control China-Canada Center for Energy Environment and Ecology Research UR-BNU School of Environment Beijing Normal University Beijing100875 China Environmental Systems Engineering Program University of Regina ReginaSKS4S 0A2 Canada Institute for Energy Environment and Sustainable Communities University of Regina ReginaS4S 0A2 Canada Department of Civil Engineering The University of Texas at Arlington ArlingtonTX United States Shandong Key Laboratory of Water Pollution Control and Resource Reuse School of Environmental Science and Engineering Shandong University Qingdao266237 China College of Environmental Science and Engineering North China Electric Power University Beijing102206 China

Herein, we reported an electrocatalytic ceramic microfiltration membrane functionalized with CuFe2O4 nanoparticles supported by nitrogen-doped carbon nanotubes (NCNTs). The synergistic catalysis between Fe and Cu induced a continuous ·OH generation. The active Fe(II) and Cu(I) sites decomposed the in-situ generated H2O2 into ·OH. The electron transfer from the external circuit and Cu(I) to Fe(III) drove the regeneration of Fe(II). The interfacial electron transfer from CuFe2O4 to NCNTs decreased the electron density of Fe and Cu, thus facilitating the redox cycles of Fe(III)/Fe(II) and Cu(II)/Cu(I). Furthermore, the Fe and Cu sites at the interface of CuFe2O4 and NCNTs displayed a superior ability to non-interface sites in producing ·OH. At near-neutral pH, the electrocatalytic membrane delivered excellent tetracycline removal kinetics (0.0134 min-1) and significantly alleviated the organic fouling occurring on the membrane. These findings shed new light on the development of new-generation membranes with catalytic oxidation capabilities for water treatment. © 2024, The Authors. All rights reserved.

关键词： Antibiotics

来源：评论

学校读者我要写书评

暂无评论

Enhancing the lubricity of gas-to-liquid (GTL) paraffinic kerosene: impact of the additives on the physicochemical properties

引用

BMC Chemical engineering 2020年第1期2卷 1-16页

作者： Hani Ababneh Nasr Mohammad Hanif A. Choudhury Nimir Elbashir Lei Zhang Rafiqul Gani Gordon McKay Chemical Engineering Department College of Engineering Qatar University 2713 Doha Qatar Petroleum Engineering Program Texas A&M University at Qatar P.O. Box 23874 Doha Qatar Institute of Chemical Process Systems Engineering School of Chemical Engineering Dalian University of Technology Dalian 116024 China PSE for SPEED Skyttemosen 6 DK_3450 Allerod Denmark Sustainable Energy Program Division of Sustainable Development College of Science and Engineering Hamad Bin Khalifah University P.O 5825 Doha Qatar

Synthetic paraffinic kerosene (SPK) is an ultra-clean fuel with low aromatic content and negligible quantities of sulfur compounds. Although, SPK has a good potential to replace the conventional fuel Jet A-1, it also has some deficiencies. One of them is the low lubricity compared to its conventional counterpart Jet A-1. To improve the lubricity of SPK, three selected additives have been mixed with SPK at different concentrations. The lubricity of the samples was determined experimentally and the samples that meet the industry specifications have been studied further. The effect of the additives on the physicochemical properties, such as, density, flash point, freezing point, viscosity, and heat content, were investigated. Linoleic acid was found to be an excellent lubricity improver even at a very low concentration and its negative impact on the other physicochemical properties was found to be insignificant. Ethyl oleate also demonstrated significant improvement in lubricity at low concentrations but had a negative impact on the fuel’s freezing point at high concentrations. Quinoline, at high concentrations, elevated the blend’s freezing point above the acceptable limits. In parallel to the experimental campaign, a pre-existing mathematical modelling tool was utilized to predict the properties of interest. The lubricity model was successfully introduced into the mathematical model in order to improve the capabilities of the model. Linoleic acid sample showed the best improvement in lubricity of SPK with wear scar diameter of 417 μm; well below the ASTM D7566 maximum limit of 850 μm. The dual nature of this study facilitated the optimization of the physicochemical properties of the fuel samples.

关键词： Synthetic paraffinic kerosene Lubricity Jet A-1 Physicochemical properties Properties modelling

来源：评论

学校读者我要写书评

暂无评论

Long-term Planning of the Fuel System in Indonesia using Optimization

引用

IOP Conference Series: Materials Science and engineering 2021年第1期1053卷

作者： Najma Widodo Wahyu Purwanto Master Program on Energy System Engineering Faculty of Engineering Universitas Indonesia Depok 16424 Indonesia Sustainable Energy Systems and Policy Reserach Cluster Chemical Engineering Department Faculty of Engineering Universitas Indonesia Depok 16424 Indonesia.

Biofuel has been considered as an option to substitute petroleum fuels and reduce dependence of fossil fuel importation and greenhouse gasess emissions. Current Indonesia's biofuel blending mandates are cannot achieved due to technical, price and financial aspects. The objectives of the study are to obtain the optimum fuel supply mix by considering the fuel quality standard, production capacity and resource availability. Long-term fuel system optimization by minimum total system cost up to 2050 is carried out using TIMES-VEDA. The results showed that if goverment does not upgrade the quality of diesel up to EURO 4 and adapted EURO fuel specification with adjustment, the optimal fuel supply mix are FAME 50%-Diesel 50% in 2020-2030 and mix of FAME 47%-HVOSMR 53% in 2035-2050. For adapted EURO specification with adjustment except the sulphur content has fuel supply mix of HVOSMR 30%-Diesel 70% in 2020, FAME 20%-Diesel 80% for 2025-2030 and FAME 47%-HVOSMR 53% for 2035-2050. For gasoline, the optimum supply mix is Ethanol 5%-Gasoline 95% in 2020 and Ethanol-Ethanol2G 20%-Gasoline 80% in the 2025-2050. The utilization of biofuels can reduce the diesel and gasoline consumption for about 67-79% and 19% and reduce carbon intensity by 65-78% and 27%, respectively.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Advancing pyrolysis of sewage sludge: Bibliometrics analysis, life cycle assessment, and circular economy insights

引用

Thermal Science and engineering Progress 2025年 63卷

作者： Abdul Hamed, Alia Syafiqah Munajat, Nur Farizan Rasit, Nazaitulshila Almanassra, Ismail W. Atieh, Muataz Ali Sayed, Khalid Aljomard, Haif Faculty of Ocean Engineering Technology Universiti Malaysia Terengganu 21030 Kuala Nerus Terengganu Malaysia Faculty of Ocean Engineering Technology Universiti Malaysia Terengganu 21030 Kuala Nerus Terengganu Malaysia Research Institute of Sciences and Engineering University of Sharjah SharjahPO Box 27272 United Arab Emirates Chemical and Water Desalination Engineering Program College of Engineering University of Sharjah SharjahPO Box 27272 United Arab Emirates Faculty of Engineering and Built Environment Universiti Kebangsaan Malaysia Selangor Bangi43650 Malaysia Biomass & Bioenergy Research Group Center for Sustainable Energy and Power Systems Research Research Institute of Science and Engineering University of Sharjah SharjahPO Box 27272 United Arab Emirates

Pyrolysis technology holds great potential for sustainable sewage sludge treatment due to its ability to recover energy, tackle the environmental challenges, and convert by-products into valuable resources. However, a comprehensive understanding of its research progression, sustainability implications, and policy relevance remains limited. This study offers a comprehensive analysis of sewage sludge (SS) pyrolysis research, integrating sustainability through life cycle assessment (LCA) and circular economy principles. Using Scopus and VOSviewer, it highlights significant growth in research, with publications rising in this decade, reflecting increasing global interest driven by environmental and technological imperatives. China dominates the field with 693 publications and extensive international collaborations, followed by the United States and Australia. Key journals play pivotal roles in disseminating findings, while interdisciplinary contributions span environmental science, energy, and chemical engineering. Keyword analysis reveals emerging trends such as circular economy, LCA, and carbon sequestration highlighting a growing focus on sustainable practices. LCA studies show that advanced pyrolysis technologies reduce greenhouse gas emissions, and align with United Nations sustainable Development Goals. Circular economy analyses underscore the economic viability of co-pyrolysis, alongside substantial energy recovery and bio-oil market potential. Additionally, this study explores the key technological challenges and mitigation strategies crucial for optimizing SS pyrolysis systems and advancing future research. These findings underscore the adaptability of SS pyrolysis for waste valorization and its role in addressing environmental challenges. This analysis provides valuable insights for advancing research, informing policy, and optimizing industrial practices, highlighting SS pyrolysis as a critical technology for sustainable waste management and resource recovery

关键词： sustainable development

来源：评论

学校读者我要写书评

暂无评论

Emergent Dimer-Model Topological Order and Quasiparticle Excitations in Liquid Crystals: Combinatorial Vortex Lattices

引用

Physical Review X 2025年第2期15卷 021084-021084页

作者： Cuiling Meng Jin-Sheng Wu Žiga Kos Jörn Dunkel Cristiano Nisoli Ivan I. Smalyukh Department of Physics and Chemical Physics Program University of Colorado Boulder Colorado 80309 USA International Institute for Sustainability with Knotted Chiral Meta Matter (WPI-SKCM) Hiroshima University Higashihiroshima Hiroshima Japan Department of Mathematics Massachusetts Institute of Technology Cambridge Massachusetts 02139 USA Faculty of Mathematics and Physics University of Ljubljana Ljubljana Slovenia Department of Condensed Matter Physics Jožef Stefan Institute Ljubljana Slovenia Theoretical Division Physics of Condensed Matter and Complex Systems and Center For Nonlinear Studies Los Alamos National Laboratory Los Alamos New Mexico 87545 USA Department of Electrical Computer and Energy Engineering Materials Science and Engineering Program University of Colorado Boulder Colorado 80309 USA Renewable and Sustainable Energy Institute National Renewable Energy Laboratory University of Colorado Boulder Colorado 80309 USA

Liquid crystals have proven to provide a versatile experimental and theoretical platform for studying topological objects such as vortices, skyrmions, and hopfions. In parallel, in hard condensed matter physics, the concept of topological phases and topological order has been introduced in the context of spin liquids to investigate emergent phenomena like quantum Hall effects and high-temperature superconductivity. Here, we bridge these two seemingly disparate perspectives on topology in physics. Combining experiments and simulations, we show how topological defects in liquid crystals can be used as versatile building blocks to create complex, highly degenerate topological phases, which we refer to as “combinatorial vortex lattices” (CVLs). CVLs exhibit extensive residual entropy and support locally stable quasiparticle excitations in the form of charge-conserving topological monopoles, which can act as mobile information carriers and be linked via Dirac strings. CVLs can be rewritten and reconfigured on demand, endowed with various symmetries, and modified through laser-induced topological surgery—an essential capability for information storage and retrieval. We demonstrate experimentally the realization, stability, and precise optical manipulation of CVLs, thus opening new avenues for understanding and technologically exploiting higher-hierarchy topology in liquid crystals and other ordered media.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Multi-attribute optimization of sustainable aviation fuel production-process from microalgae source

引用

Fuel 2022年第PartC期324卷

作者： Said, Zafar Nguyen, Tuan Hai Sharma, Prabhakar Li, Changhe Ali, Hafiz Muhammad Nguyen, Van Nhanh Pham, Van Viet Ahmed, Shams Forruque Van, Dong Nguyen Truong, Thanh Hai Department of Sustainable and Renewable Energy Engineering University of Sharjah P. O. Box 27272 Sharjah United Arab Emirates U.S.-Pakistan Center for Advanced Studies in Energy (USPCAS-E) National University of Sciences and Technology (NUST) Islamabad Pakistan Faculty of Technology Dong Nai Technology University Dong Nai 76000 Viet Nam Mechanical Engineering Department Delhi Skill and Entrepreneurship University Delhi 110089 India School of Mechanical and Automotive Engineering Qingdao University of Technology Qingdao 266520 China Mechanical Engineering Department King Fahd University of Petroleum & Minerals Dhahran 31261 Saudi Arabia Interdisciplinary Research Center for Renewable Energy and Power Systems (IRC-REPS) King Fahd University of Petroleum and Minerals Dhahran 31261 Saudi Arabia Institute of Engineering HUTECH University Ho Chi Minh City Viet Nam Faculty of Marine Engineering Vietnam Maritime University Haiphong Viet Nam Science and Math Program Asian University for Women Chattogram 4000 Bangladesh University of Science and Technology The University of Danang Viet Nam PATET Research Group Ho Chi Minh City University of Transport Ho Chi Minh City Viet Nam

The aviation sector has been one of the most significant contributors to greenhouse gas (GHG) emissions;there is an urgent need to transition from traditional fossil-based jet fuel to sustainable aviation fuel to meet net-zero targets by 2030. The use of renewable aviation fuel may be regarded as the most effective option for reducing GHG emissions in the aviation sector while allowing for long-term growth. In this study, the microalgae oil was transformed to develop hydrocarbons with the boiling point range of jet fuel. Following the transesterification of algal oil fatty acids to algal oil methyl ester, fractional distillation was carried out. The Box-Behnken technique was used to design experiments for efficient resource utilization by minimizing the number of tests during transesterification. The quantitative relationship function between input (molar ratio of methanol to oil, catalyst concentration, and temperature) and % yield of methyl ester as an output of the process was developed using analysis of variance (ANOVA). The ANFIS (adaptive neuro-fuzzy inference system) was utilized to develop a prognostic model with good prediction effectiveness. MORSM (multi-objective response surface methodology) was also used to build a prediction model using correlations. A set of statistical indicators and Theil's U2 were used to examine the prediction efficacy and model uncertainty of ANFIS and MORSM. On both statistical indices and Theil's U2, the ANFIS-based model outperformed. To get the best results, the desirability approach was used to improve operating parameters. According to the desirability approach, the best operating parameters were catalyst concentration at 2.09%, methanol to oil ratio at 9.17%, and temperature at 60.49 °C, which resulted in the greatest yield of 91%. © 2022 Elsevier Ltd

关键词： Alternative fuel Jet fuel Microalgae Optimization sustainable aviation fuel

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：