检索结果-内蒙古大学图书馆

AUTOMATION OF PROPELLER INSPECTION AND FINISHING

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 124-131页

作者： STERN, H METZGER, R Howard K. Stern:is presently vice president of Robotic Vision Systems Inc. He received a bachelor of electrical engineering degree from College of the City of New York in 1960. Mr. Stern joined Dynell Electronics Corporation in 1971 and became part of the Robotic Vision Systems Inc. staff at the time of its spin-off from Dynell. He was program manager of the various three-dimensional sensing and replication systems constructed by Dynell and Robotic Vision Systems. As program manager his responsibilities encompassed technical administrative and operational areas. The first two portrait sculpture studio systems and the first three replication systems built by Robotic Vision Systems Inc. were designed manufactured and operated under his direction. Before joining Dynell Mr. Stern was a senior engineer at Instrument Systems Corporation and chief engineer of the Special Products Division of General Instrument Corporation. Prior to these positions Mr. Stern was chief engineer of Edo Commercial Corporation. At General Instrument and Edo Commercial he was responsible for the design and manufacture of military and commercial avionics equipment. Mr. Stern is presently responsible for directing the systems design and development for all of the company's programs. Robert J. Metzger:is currently engineering group leader at Robotic Vision Systems Inc. He graduated summa cum laude from the Cooper Union in 1972 with a bachelor of electrical engineering degree. Under sponsorship of a National Science Foundation graduate fellowship he graduated from the Massachusetts Institute of Technology in 1974 with the degrees of electrical engineer and master of science (electrical engineering). In 1979 Mr. Metzger graduated from Polytechnic Institute of New York with the degree of master of science (computer science). Since 1974 Mr. Metzger has been actively engaged in the design of systems and software for noncontact threedimensional optical measurement for both military and commercial applications. Of particular note are his c

Ship's propellers are currently measured by manual procedures using pitchometers, templates and gauges. This measurement process is extremely tedious, labor intensive and time consuming. In an effort to provide increased accuracy, repeatability and cost effectiveness in propeller manufacture, an automated propeller optical measurement system (APOMS) has been built which rapidly and automatically scans an entire ship's propeller using a 3-D vision sensor. This equipment is integrated with a propeller robotic automated templating system (PRATS) and the propeller optical finishing system (PROFS) which robotically template and grind the propeller to its final shape, using the APOMS-derived data for control feedback. The optical scanning and the final shape are both controlled by CAD/CAM data files describing the desired propeller shape. An automated propeller balancing system is incorporated into the PROFS equipment. The APOMS/PRATS/PROFS equipment is expected to provide lower propeller manufacturing costs.

关键词： PROPELLERS

来源：评论

学校读者我要写书评

暂无评论

AIR-CUSHION LANDING CRAFT NAVIGATION

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 248-260页

作者： GRAHAM, HR KIM, JC BAND, EGU FOWLER, AW Herbert R. Graham:received his degrees of B.S. in 1951 and M.S. in 1958 in aeronautical engineering from the Massachusetts Institute of Technology and the California Institute of Technology respectively. He also attended the Harvard Graduate School of Business Administration. He is presently a task manager at TRW Inc. McLean Virginia responsible for landing craft air cushion (LCAC) engineering support. Since joining TRW in 1967 he has had several technical project management and system engineering responsibilities in amphibious ships transportation and energy. He was responsible for the preliminary engineering design and cost estimates for tracked air cushion vehicles (TACVs). He has been active in several professional societies including ASNE and served as vice-chairman Los Angeles Section American Institute of Aeronautics and Astronautics. John C. Kim:received his degrees of B.S. in electrical engineering Tri-State University 1959 M.S. in electrical engineering Michigan State University 1960 and Ph.D. in electrical engineering Michigan State University. He is presently a senior staff engineer with TRW Inc. McLean Virginia where his technical experience has included communications system engineering and navigation system analysis. Since joining TRW in 1969 he has held numerous positions including section head project manager and department manager. His previous employment includes E-Systems/Melpar Division and Honeywell. Dr. Kim has been active in the IEEE Washington Chapter activities which included secretary vice-chairman and chairman of Systems Science and Cybernetics Group. Edward G.U. Band:received a B.S. degree in mechnical engineering in 1946 and a D.I.C in aeronautical engineering in 1947 at the City and Guilds College of London University. In 1951 he received an M.S. degree from Stevens Institute of Technology in fluid dynamics. After a career in the aircraft industry in England Canada and the U.S.A. he spent several years teaching in Chile and at Webb Institute of Naval Archi

Air cushion vehicles (ACVs) have operated successfully on commercial routes for about twenty years. The routes are normally quite short; the craft are equipped with radar and radio navigation aids and maintain continuous contact with their terminals. Navigation of these craft, therefore, does not present any unusual difficulty. The introduction of air cushion vehicles into military service, however, can present a very different picture, especially when external navigation aids are not available and the craft must navigate by dead reckoning. This paper considers the problems involved when navigating a high-speed air cushion vehicle by dead reckoning in conditions of poor visibility. A method is presented to assess the ACV's navigational capability under these circumstances. A figure of merit is used to determine the sensitivity of factors which affect navigation such as the range of visibility, point-to-point distance, speed, turning radius and accuracy of onboard equipment. The method provides simplistic but adequate answers and can be used effectively to compare the-capability and cost of alternative navigation concepts.

关键词： AIR CUSHION VEHICLES

来源：评论

学校读者我要写书评

暂无评论

RATIONALE FOR AN ADA SOFTWARE engineering ENVIRONMENT FOR NAVY MISSION CRITICAL APPLICATIONS

引用

NAVAL ENGINEERS JOURNAL 1984年第4期96卷 133-145页

作者： PAIGE, KK CONVERSE, RA USN LCdr. Kathleen K. Paige USN:graduated with a BA from the University of New Hampshire in 1970. She received her commission from Officer Candidate School in April 1971 and performed her first tour of duty with VFP-63 NAS Miramar. LCdr. Paige then received her MS from the Naval Post Graduate School in June 1976 and returned to San Diego to serve as Head Support Software Division at the Fleet Combat Direction System Support Activity. In May 1981 she reported to NA VSEA (PMS-408) where she served initially as Chairman of the NAVMAT Software Engineering Environment Working Group. She has been assigned as Deputy AN/UYK-43 Acquisition Manager since October 1981. LCdr. Paige was designated a fully qualified Engineering Duty Officer in December 1983. Robert A. Converse:is presently the Acquisition Manager for the Ada Language System/Navy (ALS/N) for the Naval Sea Systems Command Tactical Embedded Computer Resources Project. As such he is responsible for the definition and development of the ALS/N to be provided as a Navy standard computer programming system for Navy mission critical applications. Mr. Converse received a Bachelor of Science degree in Physics from Wheaton College Wheaton II. He spent fourteen years with the Naval Underwater Systems Center Newport Rhode Island during which time he designed and developed the Fortran compiler for the Navy Standard AN/UYK-7 computer. Also during that period he received a Master of Science degree in Computer Science from the University of Rhode Island. His thesis for that degree was entitled “Optimization Techniques for the NUSC Fortran Cross-Compiler”. Mr. Converse started his involvement with the Ada program in 1975 with the initial “Strawman” requirements review. Subsequently he was named as the Navy Ada Distinguished Reviewer and was intimately involved in the selection and refinement of the Ada language as it evolved to become ANSI/MIL-STD-1815A.

The U.S. Navy introduced the use of digital computers in mission critical applications over a quarter of a century ago. Today, virtually every system in the current and planned Navy inventory makes extensive use of computer technology. computers embedded in mission critical Navy systems are integral to our strategic and tactical defense capabilities. Thus, the military power of the U.S. Navy is inextricably tied to the use of programmable digital computers. The computer program is the essential element that embodies the system “intelligence”. In addition, it provides the flexibility to respond to changing threats and requirements. However, this very flexibility and capability poses a host of difficulties hindering full realization of the advantages. This paper describes the lessons learned about computer program development over the past twenty five years and discusses a software engineering process that addresses these lessons. It then describes how Ada and its related Ada programming Support and Run-Time Environments foster this software engineering process to improve computer program productivity and achieve greater system reliability and adaptibility. Finally, the paper discusses how the use of Ada and its environments can enhance the interoperability and transferability of computer programs among Navy projects and significantly reduce overall life cycle costs for Navy mission critical computer programs.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A computer-MODEL FOR SHIPBOARD ENERGY ANALYSIS

引用

NAVAL ENGINEERS JOURNAL 1984年第5期96卷 33-45页

作者： DETOLLA, JP FLEMING, JR Joseph DeTolla:is a ship systems engineer in the Ship Systems Engineering Division SEA 56D5 at the Naval Sea Systems Command. His career with the Navy started in 1965 at the Philadelphia Naval Shipyard Design Division. In 1971 he transferred to the Naval Ship Engineering Center. He has held positions as a fluid systems design engineer and auxiliary systems design integration engineer. Mr. DeTolla has worked extensively in the synthesis and analysis of total energy systems notably the design development of the FFG-7 class waste heat recovery system. He is NA VSEA's machinery group computer supported design project coordinator and is managing the development of a machinery systems data base load forecasting algorithms and design analysis computer programs. Mr. DeTolla has a bachelor of science degree in mechanical engineering from Drexel University and a master of engineering administration degree from George Washington University. He is a registered professional engineer in the District of Columbia and has written several technical papers on waste heat recovery and energy conservation. Jeffrey Fleming:is a senior project engineer in the Energy R&D Office at the David Taylor Naval Ship R&D Center. In his current position as group leader for the future fleet energy conservation portion of the Navy's energy R&D program he is responsible for the identification and development of advanced components and subsystems which will lead to reductions in the fossil fuel consumption of future ships. Over the past several years he has also directed the development and application of total energy computer analysis techniques for the assessment of conventional and advanced shipboard machinery concepts. Mr. Fleming is a 1971 graduate electrical engineer of Virginia Polytechnic Institute and received his MS in electrical engineering from Johns Hopkins University in 1975. Mr. Fleming has authored various technical publications and was the recipient of the Severn Technical Society's “Best Technical Paper of the Year” award in 1

In support of the Navy's efforts to improve the energy usage of future ships and thereby to reduce fleet operating costs, a large scale computer model has been developed by the David Taylor Naval Ship Research and Development Center (DTNSRDC) to analyze the performance of shipboard energy systems for applications other than nuclear or oil-fired steam propulsion plants. This paper discusses the applications and utility of this computer program as a performance analysis tool for design of ship machinery systems. The program is a simulation model that performs a complete thermodynamic analysis of a user-specified energy system. It offers considerable flexibility in analyzing a variety of propulsion, electrical, and auxiliary plant configurations through a component building block structure. Component subroutines that model the performance of shipboard equipment such as engines, boilers, generators, and compressors are available from the program library. Component subroutines are selected and linked in the program to model the desired machinery plant functional configurations. The operation of the defined shipboard energy system may then be simulated over a user-specified scenario of temperature, time, and load profiles. The program output furnishes information on component operating characteristics and fuel demands, which allows evaluation of the total system performance.

关键词：

来源：评论

学校读者我要写书评

暂无评论

RETROFITTING OF BULBOUS BOWS ON UNITED-STATES NAVY AUXILIARY AND AMPHIBIOUS WARSHIPS

引用

NAVAL ENGINEERS JOURNAL 1984年第6期96卷 40-51页

作者： CHUN, SK HOUGH, JJ ENGLE, AH FUNG, SC Stephen K. Chunis a graduate of the Maritime College of the State University of New York class of 1981 from which he received a B.E. degree in naval architecture and his license as a Third Assistant Engineer from the U.S. Coast Guard. Since graduation he has worked for the U.S. Navy as a naval architect with the Hull Form and Hydrodynamics Performance Division (SEA 55W3) of the Naval Sea Systems Command. Currently he is the task leader for hydrodynamic design for the DDG-51. He is also responsible for bulbous bow and appendage design for surf ace ships. Mr. Chun is a member of ASNE SNAME and ASE. Jeffrey J. Hough:is currently a naval architect with the Hull Form and Hydrodynamic Performance Division (SEA 55VV3) of the Naval Sea Systems Command (NA VSEA). In his current capacity he is a member of the Surface Ship Hydrodynamics Branch and is the divisional coordinator for computer supported design (CSD) technical director for the hull form design system (HFDS) Hull Engineering Group (SEA 55) assistant coordinator for CSD SEA 55 CSD coordinator for the DDG-51 contract design and SEA 55W3 project engineer for aircraft carrier/aviation support ship hydrodynamics. Mr. Hough received his B.S.E. degree in naval architecture and marine engineering in 1978 and his M.S.E. degree in naval architecture and marine engineering in 1979 from the University of Michigan. He began his career with the U.S. Navy in 1979 as an Engineer-in-Training in the Ship Design and Integration Directorate of NAVSEA. Prior to his current assignment Mr. Hough was the technical director responsible for the hull form and hydrodynamics energy conservation program and technical specialist for design practices for resistance and powering margins and hull form geometry. A member of ASNE since 1979 Mr. Hough is also a member of SNAME ASE and the U.S. Naval Institute. Allen H. Engleis a naval architect with the Hull Form Design and Performance Division of the Naval Sea Systems Command. He received his B.S. degree in engineering science from th

To meet energy conservation goals of the U.S. Navy, its attention has been focused on ways to reduce individual ship total resistance and powering requirements. One possible method of improving ship powering characteristics is by modifying existing individual ship hulls with the addition of bulbous bows. This paper will identify the merits of retrofitting bow bulbs on selected U.S. Navy auxiliary and amphibious warfare ships. A procedure for performing a cost-benefit analysis will be shown for candidate ship classes. An example of this technique for an amphibious warfare ship will also be provided. A brief discussion of future methods to be used for bulbous bow design such as application of systematic model test data and numerical hydrodynamic techniques will be given.

关键词： NAVAL VESSELS

来源：评论

学校读者我要写书评

暂无评论

AN ADVANCED METHODOLOGY FOR PRELIMINARY HULL FORM DEVELOPMENT

引用

NAVAL ENGINEERS JOURNAL 1984年第4期96卷 147-161页

作者： LIN, WC DAY, WG HOUGH, JJ KEANE, RG WALDEN, DA KOH, IY Wen-Chin Lin:heads the Ship Powering Division at the David Taylor Naval Ship R&D Center (DTNSRDC). Dr. Lin received his B.S. degree in mechanical engineering from the National Taiwan University in 1957. He was awarded his M.S. degree in naval architecture and Ph.D. in engineering science from the University of California at Berkeley in 1963 and 1966 respectively. From 1966 to 1969 he was employed by ESSO Research and Engineering Company to conduct marine hydrodynamic research for oil tankers and offshore structures. Since joining DTNSRDC in 1969 he has actively conducted and directed hydrodynamic research to advance naval ship design technology and improve ship performance. Active in national and international symposia on ship hydrodynamic research he is recognized for contributions to the ship research community. For the past six years he has been a member of the Performance Committee of the ITTC and currently serves as secretary of the committee. He is a member of SNAME and the Society of Naval Architects of Japan. William G. Day Jr:. has been employed as a naval architect at the David Taylor Naval Ship R&D Center since receiving a B.E.S. degree from the Johns Hopkins University in 1966. He obtained an M.S. E. degree from George Washington University in 1971. As Head Design Evaluation Branch of the Ship Performance Department he is responsible for model experiments to evaluate the hydrodynamic performance of ships and propulsors. He is a member of ASNE and SNAME. In-Young Koh:received his B.S. and M.S. degrees in electrical engineering from Lowell University in 1969 and 1971 respectively and his Ph.D. in applied mechanics from Rensselaer Polytechnic Institute in 1976. Dr. Koh joined DTNSRDC as an electronic engineer specializing in the application of advanced instrumentation and computer techniques to ship research and design. He is currently engaged in research and development of active control systems for naval ship applications. Dr. Koh is a member of ASNE SNAME and IEEE. David Andrew Walden:is

A ship design methodology is presented for developing hull forms that attain improved performance in both seakeeping and resistance. Contrary to traditional practice, the methodology starts with developing a seakeeping-optimized hull form without making concessions to other performance considerations, such as resistance. The seakeeping-optimized hull is then modified to improve other performance characteristics without degrading the seakeeping. Presented is a point-design example produced by this methodology. Merits of the methodology and the point design are assessed on the basis of theoretical calculations and model experiments. This methodology is an integral part of the Hull Form Design system (HFDS) being developed for computer-supported naval ship design. The modularized character of HFDS and its application to hull form development are discussed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

computer AIDS FOR SHIP DESIGN, INTEGRATION AND CONTROL

引用

NAVAL ENGINEERS JOURNAL 1980年第2期92卷 73-87页

作者： CARLSON, CM JOHNSON, RA HELMING, FW Mr. Craig M. Carlson received his B.S. degree in Naval Architecture and Marine Engineering from the University of Michigan in 1970 and began his career with the Department of the Navy at the Naval Ship Engineering Center (NAVSEC). In 1972. he returned to the University of Michigan under the NAVSEC Long Term Training Program and received his M.S. degree in Naval Architecture and Marine Engineering. After returning to the Ship Arrangements Branch at NAVSEC. he was assigned as Task Leader for General Arrangements for the PGG PCG PHM. and MCM ship designs and was awarded Outstanding Performance Awards in 1974 and 1975. In addition he was Manager of the Arrangement Subsystem of the Navy's Computer-Aided Ship Design and Construction Program (CASDAC). In October 1979. he became Manager of the CASDAC Hull Design System. Currently. he also is enrolled in the M.S. of Computer Science Program at Johns Hopkins University. Mr. Carlson previously has presented technical papers at ASNE Day 1974 and 1978 as well as at the 1979 DOD Manufacturing Technology Advisory Group Conference. Besides ASNE. which he joined in 1972. he is a member of SNAME. ASE. and the U.S. Naval Institute. Mr. Robert A. Johnson is a Naval Architect in Surface Combatants Design (SEA 03D3). Ship Design Integration Directorate Naval Sea Systems Command. He received an Associate in Engineering degree in Drafting and Design Technology in 1959. his B.S. degree in Aerospace Engineering in 1965. and his M.S. degree in Engineering Mechanics in 1970. all from the Pennsylvania State University. In 1973. he was selected for the NA VSEC Hull Division s Long Term Training Program at the University of Michigan subsequently receiving his M.S.E. degree in Naval Architecture in 1974. Mr. Johnson began his career with the Ordnance Research Laboratory at Pennsylvania State University in 1959 where he worked. on the design of hydroelastic submarine models and conducted research in the area of flow induced structural vibrations. In 1967 he joined HRB-Singer at State Colle

This paper presents an integrated approach to computer-Aided Ship Design for U.S. Navy preliminary and contract design. An integrated Hull Design system (HDS), currently under development by the Hull Group of the Naval Sea systems Command (NAVSEA 32). is the vehicle for the discussion. This paper is directed toward practicing ship design professionals and the managers of the ship design process. Primary emphasis of this paper, and of the development effort currently under way, is on aiding ship design professionals in their work. Focus is on integration and management control of the extremely complex set of processes which make up naval ship design. The terminology of the Ship Designer and Design Manager is used. The reader needs no familiarity with the technologies of computer science.

关键词：

来源：评论

学校读者我要写书评

暂无评论

CENTML CONTROL system TRAINING THROUGH STA TIC AND DYNAMIC SIMULATION

引用

Naval Engineers Journal 1980年第2期92卷 196-206页

作者： HALL, EDWIN E. MOSS, DONALD G. NORRIS, CLIFFORD S. PETERSON, HAROLD D. Mr. Edwin E. Hall received his Bachelor's degree in Electronics from Oklahoma City University. He also is a certified College-Level Instructor in the state of Florida and has done graduate work in Computer Science at the University of Florida. As the Technical Publications and Training Manager Simulation and Control Systems Department. General Electric Company Daytona Beach Fla. he currently is responsible for the costing. planning performance scheduling and timely completion of the Department's Technical Manuals and Technical Training Programs. These Training and Manual contracts cover Ship Systems Programs. Simulation Programs. and Communications Programs for the Armed Services and commercial customers. Mr. Hall has over twenty-years experience as a Technical Writer and Instructor and for the past seventeen years has been at the General Electric Company's Daytona Beach Facility. His experience ranges from teaching Basic Electronics and Radar Circuitry as a civilian instructor for the U.S. Army to writing Manuals Proposals Reports Specifications and Brochures for General Electric's product lines. Mr. Donald G. MOSS is a graduate of Kansas State University from which he received both his B.S. degree in Business Administration and his M.S. degree in Electrical Engineering. He is presently a Senior Systems Engineer for Control Systems in the Simulation and Control Systems Department at the General Electric Company's Daytona Beach Facility. He has been employed by General Electric for 23 years — the first seven as an Engineer and Program Manager on the Fire Control Systems for the Fleet Ballistics Missile Program the next six managing the design of control and checkout equipment on the APOLLO Program and the last ten years working on control equipment for the machinery plants of new Navy ships. Over the span of years at General Electric he has worked on propulsion control for the DD-963 propulsion electric plant and auxiliary control for the FFG-7: propulsion boiler burner electric auxiliary and car

Dynamic Simulation is defined as the hardware and software required to present to the student operator visual and audible cues and responses that are the same as those encountered when operating the Control Consoles aborad ship. This type of simulation is considered essential to the development of operator skills for critical tasks. Less critical tasks can be practiced using static simulation devices. This paper discusses the utilization of these types of training devices to train Navy crews. An overview of the Machinery Control systems of the FFG 7 and AO 177 Class ships is discussed to provide an understanding of state‐of‐the‐art equipment development. The training programs for these two ship Classes are then reviewed to show how simulation devices are currently used by the Training Community, and this is followed by a brief discussion of the additional benefits that also are derived. © 1980 by the American Society of Naval Engineers, Inc.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Abstracts

引用

Environmental Management 1977年第1期1卷 67-96页

作者： Frankenfeld, John W. Schulz, Wolfgang McMurty, George J. Petersen, Gary W. May, G. A. Hering, F. S. Schwartz, J. I. Heywood, J. B. Chigier, N. A. Grohse, E. W. Walker, J. D. Colwell, R. R. Petrakis, L. Pergament, H. S. Thorpe, R. D. Schoepf, Richard W. Krzyczkowski, Roman Henneman, Suzanne S. Hudson, Charles L. Putnam, Evelyn S. Thiesen, Donna J. Parks, G. A. McCarty, Perry L. Leckie, J. O. Schrumpf, Barry J. Simonson, G. H. Paine, D. P. Lawrence, R. D. Pyott, W. T. Leh, M. Elders, W. Combs, J. Caplen, T. Harrison, F. L. Wong, K. M. Heft., R. E. Charnell, Robert L. Lehmann, Edward J. Mallon, Lawrence G. Hatfield, Cecile Adams, Gerald H. Johanning, James Talvitie, Antti Noll, Kenneth E. Miller, Terry Smiarowski, Joseph F. Willis, Cleve E. Foster, John H. Schlesinger, Benjamin Daetz, Douglas Lear, Donald U. Smith, Mona F. Hundemann, Audrey S. Crockett, Pernell W. Werner, Kirk G. Carroll, Thomas E. Maase, David L. Genco, Joseph E. Ifeadi, Christopher N. Lowman, F. G. Christensen, S. W. Van Winkle, W. Mattice, J. S. Harrison, Elizabeth A. Barker, James C. Chesness, Jerry L. Smith, Ralph E. Shaheeen, Donald G. Raney, R. Keith Borton, T. Wezernak, C. T. Raney, R. K. Sherwani, Jabbor K. Moreau, David H. Eisenberg, Norman A. Lynch, Cornelius J. Breeding, Roger J. Johnson, J. D. Foster, K. E. Mouat, D. A. Clark, R. Hyden, John William Owen, Wilfred Bayfield, Neil G. Barrow, Graham C. Stolz, Stephanie B. Wienckowski, Louis A. Brown, Betram S. Keyfitz, Nathan Wilson, W. L. Newman, Peter W. G. Bammi, Deepak Bammi, Dalip Goddard, James E. Chisholm, Tony Walsh, Cliff Brennan, Geoffrey Thompson, K. S. Richardson, R. Jensen, Clayton E. Brown, Dail W. Mirabito, John A. Cowing, Thomas G. Binghamton, Suny Siehl, George H. Albrecht, O. W. Alexander, Ariel Barde, Jean -Philippe Darby, William P. McMichael, Francis Clay Dunlap, Robert W. Muckleston, Keith W. Frankenhoff, Charles A. Giulini, Lorenzo T. Wyatt, T. Black, Peter E. Keating, William Thomas Leonard, M. E. Fisher, E. L. Brunelle, M. F. Dickinson, J. E. Pethig, Rudiger Clapham Exxon Research & Engineering Co. Linden Government Research Lab Coast Guard Washington D.C. Department of Transportation Washington D.C. Office For Remote Sensing of Earth Resources. NASA Earth Resources Survey Program Pennsylvania State University Washington D.C. Department of the Navy Washington D.C. Cambridge. Dept. of Mechanical Engineering Massachusetts Inst. of Technology USA Huntsville. School of Graduate Studies and Research Alabama Univ. USA Dept. of Microbiology. Office of Naval Research Maryland Univ. Arlington Research and Development Co. Pittsburgh AeroChem Research Labs. Inc. Princeton Dept. of the Interior Office of Library Services. Bibliographic Series (Final) Washington D.C. Interplan Corp. Santa Barbara Urban Mass Transportation Adm. Washington D.C. Naval Underwater Systems Center Newport Calif. Mercury Project. National Science Found Stanford Univ Washington D.C. Div. of Advanced Environmental Research & Tech. USA Corvallis. NASA Earth Resources Survey Program Oregon State Univ. Washington D.C. Riverside. Inst. of Geophysics and Planetary Physics National Science Foundation California Univ. Washington D.C. Livermore Lawrence Livermore Lab. California Univ. USA Atlantic Oceanographic and Meteorological Labs. National Oceanic and Atmospheric Administration Miami National Technical Information Service Springfield Miami Univ. Coral Gables School of Law National Oceanic and Atmospheric Administration Rockville National Academy of Sciences Office of Sea Grant Washington D. C. School of Law National Oceanic and Atmospheric Administration Office of Sea Grant. Rockville Norman. Dept. of Civil Engineering and Environmental Science. Urban Mass Transportation Administration Oklahoma Univ. Washington D. C. Knoxville.Dept. of Civil Engineering. Federal Highway Administration Tennessee Univ. Washington D. C. Amherst.Water Resources Research Center. Office of Water Research and Technology Massachusetts Univ. Washington D. C. Calif. Dept. of Industria

来源：评论

学校读者我要写书评

暂无评论

MULTITAPE AFA

引用

JOURNAL OF THE ACM 1972年第2期19卷 193-&页

作者： GREIBACH, S GINSBURG, S University of California at Los Angeles Los Angeles California Department of System Science Los Angeles CA University of Southern California Computer Science Program Olin Hall of Engineering Los Angeles CA

Device representations, via multitape AFA (abstract families of acceptors), are given for the families of languages which result from applying the wedge (A) m)d the substitution operations to AFL (abstract families of languages). In particular, if ~ and ~2 are multitape AFA (i.e. certain families of multistorage tape acceptors), then 5)~ A ~2 is defined as the family of multitape acceptors which results when the tapes of ~ and ~2 are coalesced, with the ~-tapes preceding those in ~2. It is shown that the smallest full AFL containing 2(~) A 2 (~D2) = {L~ N L2 ILi in2 (~Di) } is, 12 (~ h~:). For each multitape AFAr, aset ~.v of “nested” multitape acceptors is defined. It is shown that if ~ and ~2 are single-tape AFA, then the family of languages obtained from (~ A ~2) N is the family of langnages obtained by substituting the AFL defined by ~2 into the AFL defined by ~D~. © 1972, ACM. All rights reserved.

关键词： acceptors AFL theory formal languages intersection multistorage tapes substitution

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：