检索结果-内蒙古大学图书馆

Empirical testing: The prototyper's evaluation mechanism

NAVAL ENGINEERS JOURNAL 1997年第1期109卷 41-46页

作者： Hafner, AN Arnold N. Hafner Ph.D.:is founder and president of Information Systems Research (ISR). He has twenty-five years of experience in systems development and is published in the field of systems development management. He served as corporate research scientist at Systems Exploration Inc. from 1988 to 1991 program director at Computer Science Corporation from 1983 to 1988 director of operations at Republic Management Systems Corporation from 1981 to 1983 and program manager at Computer Science Corporation from 1972 to 1981. A 1962 graduate of the US. Naval Academy he holds a doctoral degree in human behavior and engineering degrees in electronics and communications. He has taught courses on information systems and systems management at most of the colleges in the San Diego area. Dr. Hafner has presented fourteen refereed research papers while publishing sixteen articles and a book A Manager's Guide to Software System Development.

Evaluating complex systems is the subject of this paper, the third in a series investigating prototyping. It provides an interesting and helpful overview of how to evaluate systems prototypes and outlines the iterative stream of developer-user interactions that is replacing older approaches to testing and evaluating new military systems, which promise to reduce the time required to develop and field future military capabilities. Changes to the acquisition process, such as those the paper sketches, will facilitate the nation's rapid transit through its current revolution in military affairs.

关键词： systems analysis

来源：评论

学校读者我要写书评

暂无评论

Operational systems, logistics engineering and technology insertion

引用

NAVAL ENGINEERS JOURNAL 1997年第3期109卷 205-220页

作者： Grubb, MJ Skolnick, A Michael J. Grubb:has perfomzed naval engineering at the Crane Division Naval Surface Warfare Center (NSWC) for more than twenty-five years. He currently the program manager for the Sustainable Hardware and Affordable Readiness Practice Program (SHARP). is a Navy-wide logistics research and development prgram aimed at the successful transiton of proved technologies inot the fleet. SHARP focuses on reducing acquisition performance capability reliability maintainability and readiness of these systems. Mr. Grubb has served as a department director for the past eleven years. His most recent assignment was as director of the Tactical Computer Resources and Test Equipment Department. This organization provided acquisition and in-service engineering support of the Navy's tectical embedded computers priphirals displays and mass memory storage devices. The organization also provided a complete range of product engineering and metrology engineerig services for SSP NevSeaSysCom and the Trident Program. Prior to this appointment Mr. Grubb was deptuy director psysical security programs department and site responsible for program management and system integration of ashore integrated security systems. Mr. Grubb holds a B.S. degree in industrial engineering from Iowa State Universtiy an M.S. degree in industrial engineering from Purdue University and has copleted the course work (Dec.'96 for a master's degree in public and environment affairs at Indiana University-Purdue Univeristy Indianapolis. Dr. Alfred Skolnick operates System Science Consultants (SSC) specilizing in strategic planning technical program definiton technology assessment and engineering analyses on selected matters of national interest. He has taught physics mathematics and management sciences at University of Virginia and Marymount University and is currently adjunct professor of mathematics at Northern Virginia Community College. Form 1985 to 1989 he was president of the American Society of Noval Engineers. Dr. Skolnick served at Applied Physic

In an era of fiscal austerity, downsizing and unforgiving pressure upon human and economic capital, it is an Augean task to identify resources for fresh and creative work. The realities of the day and the practical demands of more immediate fleet needs can often dictate higher priorities. Yet, the Navy must avoid eating its seed corn. Exercising both technical insight and management foresight, the fleet, the R&D community, the Office of the Chief of Naval Operations (OpNav) and the product engineering expertise of the Naval Surface Warfare Center (NSWC) are joined and underway with integrated efforts to marry new, fully demonstrated technologies and operational urgencies. Defense funding today cannot sponsor all work that can be mission-justified over the long term because budgets are insufficient to support product maturation within the classical development cycle. However, by rigorous technical filtering and astute engineering of both marketplace capabilities and currently available components, it is possible in a few select cases to compress and, in effect, integrate advanced development (6.3), engineering development (6.4), weapon procurement (WPN), ship construction (SCN), operation and maintenance (O&M,N) budgetary categories when fleet criticalities and technology opportunities can happily meet. In short, 6.3 funds can be applied directly to ''ripe gateways'' so modern technology is inserted into existing troubled or aging systems, sidestepping the lengthy, traditional development cycle and accelerating practical payoffs to recurrent fleet problems. To produce such constructive results has required a remarkable convergence of sponsor prescience and engineering workforce excellence. The paper describes, extensively, the philosophy of approach, transition strategy, polling of fleet needs, technology assessment, and management team requirements. The process for culling and selecting specific candidate tasks for SHARP sponsorship (matching operational need with t

关键词： Naval vessels

来源：评论

学校读者我要写书评

暂无评论

Developing a prototype concurrent design tool for composite topside structures

引用

NAVAL ENGINEERS JOURNAL 1997年第3期109卷 279-290页

作者： Dirlik, S Hambric, S Azarm, S Marquardt, M Hellman, A Bartlett, S Castelli, V Steve Dirlik:began his career at the Naval Surface Warfare Center Carderock Division in 1981 as an aerospace engineer co-op student. He completed his bachelor of science degree in aeropace and ocean engineering from Virginia Polytechnic Institute and State University in 1985 and his master of science degree in aerospace engineering from the University of Maryland in 1990. Mr. Dirlik recently completed a master of science program in applied physics at The Johns Hopins University and currently works in the Radar Cross Section and Target Physics Branch of the Signatures Directorate at the Naval Surface Warfare Center Corderoke Division. He has worked on Navy low observable programs since 1990. Stephen Hambric:is a research associate at the Applied Research Laboratory at The Pennsylvania State University. He received his B. S. and M.S. degree in mechanical engineering from Virginia Polytechnic Institute and State University and his D. Sc. in mechnical engineering from the George Washington University. He has worked on several computer aided multidiscikplinary design and optimization projects over the years including an automated propeller design system and a structural acoustic optimization capability. Dr. Shpour Azarm:is currently working as an associate professor with the Design and Manufacturing Group of the Department of Mechanical Engineering at the University of maryland at College Park. Dr Azarm's expertise is in the areas of optimization-based designed and concurrent design and optimization of multidisciplinary systems. He was a consultant at Black & Decker Corporation (summer 1996) and worked as a Navy senior summer faculty fellow (summer 1995) and a NASA summer faculty fellow (summer 1994). He was a visiting scientist at NASA Langley Research Center for Multidisciplinary Analysis and Applied Structural Optimzatiom at the University of Siegen in Germany (spring 1992) and the Design Institute of the Technical University of Denmark (summer 1990). Dr Azarm was an associate technical editor of the ASME Jour

A prototype concurrent engineering tool has been developed for the preliminary design of composite topside structures for modern navy warships. This tool, named GELS for the Concurrent engineering of Layered Structures, provides designers with an immediate assessment of the impacts of their decisions on several disciplines which are important to the performance of a modern naval topside structure, including electromagnetic interference effects (EMI), radar cross section (RCS), structural integrity, cost, and weight. Preliminary analysis modules in each of these disciplines are integrated to operate from a common set of design variables and a common materials database. Performance in each discipline and an overall fitness function for the concept are then evaluated. A graphical user interface (GUI) is used to define requirements and to display the results from the technical analysis modules. Optimization techniques, including feasible sequential quadratic programming (FSQP) and exhaustive search are used to modify the design variables to satisfy all requirements simultaneously. The development of this tool, the technical modules, and their integration are discussed noting the decisions and compromises required to develop and integrate the modules into a prototype conceptual design tool.

关键词： Warships

来源：评论

学校读者我要写书评

暂无评论

Influence of human engineering on manning levels and human performance on ships

引用

NAVAL ENGINEERS JOURNAL 1997年第5期109卷 67-76页

作者： Anderson, DE Oberman, FR Malone, TB Baker, CC David E. Anderson:has a bachelor of science degree in environmental engineering from Florida Technological University and a master's degree in environmental engineering from the University of Central Florida. He is a graduate of the Naval Sea Systems Command's Engineer-In-Training (EIT) Program. Mr. Anderson was instrumental in introducing the collective protection system (CPS) in the U.S. Navy developing the initial forward-fit package for the USS Gunston Hall and the engineering change proposal (ECP) for the USS Wasp. In 1990 he joined the Human Systems Integration (HSI) Division (SEA 55W5) where he was task leader for auxiliary ships. He is currently the HSI manager for the future technology variant of the SeaLift ship and the future carrier. Association of Scientists and Engineers 33rdAnnual Technical Symposium 26 April 1996. Fred R. Oberman:has B.A. and M.A. degrees from the University of Chicago and Loyola University (experimental psychology) and an M.S. degree in industrial engineering and operations research from Virginia Polytechnic Institute (VPI). He has more than 30 years experience in HSI management planning research analysis design and testing in government and private sector positions. He is currently responsible for NavSea HSI generic research and tool development efforts. He is responsible for Human Engineering Specifications and Standards (Commercial Hypertext) and is the NavSea 03D7 representative on HSI in Performance Specifications and for integration of HSI within Integrated Logistic Support (ILS). He has served as DoD HSI SubTAG chair and member of the Simulation and Modeling Test and Evaluation Display and Control Systems Human Computer Interaction Specifications and Standards and Systems Design Sub Tags as a member of the Society of Naval Architects and Marine Engineers (SNAME) Systems Safety Panel and a member of NATO RSG 14 on man-machine analysis. Thomas B. Malone: CHFEP received a Ph.D. in experimental psychology from Fordham University in 1964. He is president of Carlow

The objectives of Human engineering (HE) are generally viewed as increasing human performance, reducing human error, enhancing personnel and equipment safety, and reducing training and related personnel costs. There are other benefits that are thoroughly consistent with the direction of the Navy of the future, chief among these is reduction of required numbers of personnel to operate and maintain Navy ships. The Naval Research Advisory Committee (NRAC) report on Man-Machine Technology in the Navy estimated that one of the benefits from increased application of man-machine technology to Navy ship design is personnel reduction as well as improving system availability, effectiveness, and safety The objective of this paper is to discuss aspects of the human engineering design of ships and systems that affect manning requirements, and impact human-performance and safety The paper will also discuss how the application of human engineering leads to improved performance, and crew safety, and reduced workload, all of which influence manning levels. Finally, the paper presents a discussion of tools and case studies of good human engineering design practices which reduce manning.

关键词： Human engineering

来源：评论

学校读者我要写书评

暂无评论

A DISTRIBUTED MEDIA ACCESS PROTOCOL FOR PACKET RADIO NETWORKS AND PERFORMANCE ANALYSIS .2. NETWORK SET-UP TIME AND DATA RATE

引用

INTERNATIONAL JOURNAL OF COMMUNICATION systemS 1995年第1期8卷 49-63页

作者： POND, LC LI, VOK Communication Sciences Electrical Engineering Systems University of Southern California Los Angeles CA 90089-2565 U.S.A. Lawrence C. Pond received the M.Sc. and Ph.D. degrees in electrical engineering from the University of Southern California in 1983 and 1990 respectively. Dr. Pond is currently a scientist at Hughes Space and Communications Company having joined in 1980. He has worked in the fields of communication system design mobile communication network and spacecraft payload design. He is currently working on the development of satellite-based ATM transport and switching architectures for BISDN and Defense Information System Network amlications. Dr. Pond is a member of IEEE. Victor O. K. Li was born in Hong Kong in 1954. He received his SB SM and Sc.D. degrees in Electrical Engineering and Computer Science from the Massachusetts Institute of Technology Cambridge Massachusetts in 1977 1979 and 1981 respectively. Since February 1981 he has been with the University of Southern California (USC) LOS Angeles California where he is Professor of Electrical Engineering and Director of the USC Communication Sciences Institute. He has published 150 technical papers and has lectured and consulted extensively around the world. His research interests include high-speed communication networks personal communication networks intelligent networks distributed databases queueing theory graph theory and applied probability. Dr. Li is very active in the Institute of Electrical and Electronic Engineers (IEEE) having been a member of the Computer Communications Technical Committee since 1983 and having served as Chairman from 1987–1989. He served as Chairman of the Los Angeles Chapter of the IEEE Information Theory Group from 1983–1985. He is the Steering Committee Chair of the International Conference on Computer Communications and Networks (IC3 N) General Chair of the 1st Annual IC3N held in San Diego California in June 1992 General Chair and Technical Program Chair of the 4th IEEE Workshop on Comp

In this, the second part of a two-part paper, the required time for establishing a mobile packet radio network using the virtual circuit and time division multiple access protocol developed in Part 1 is analysed. Tools are developed to determine the virtual circuit and network set-up times in terms of the channel bandwidth allocated to establish and maintain the network. The tools are then extended to include the effects of user mobility. Then these results are combined with the network capacity results of Part 1 to analyse the trade-off between the data rate and set-up time of the network. Next a hierarchical architecture is proposed and the network data rate versus set-up time trade-off of this architecture is analysed using these tools. This architecture is shown to both provide a higher data rate and establish faster than flat networks of the same number of nodes.

关键词： PACKET RADIO NETWORK EPLRS DISTRIBUTED NETWORK TDMA VIRTUAL CIRCUITS MULTIHOP NETWORK BOUNDED DELAY MOBILITY NETWORK SET-UP TIME HIERARCHICAL NETWORK NETWORK DATA RATE

来源：评论

学校读者我要写书评

暂无评论

PERFORMANCE OF A PRIORITIZED ON-BOARD BASEBAND SWITCH FOR A MULTISERVICE MULTIBEAM SATELLITE

引用

INTERNATIONAL JOURNAL OF SATELLITE COMMUNICATIONS 1994年第3期12卷 283-297页

作者： BOHM, S ELHAKEEM, AK HACHICHA, M Department of Electrical and Computer Engineering Concordia University 1455 De Maisonneuve Blvd. West Montreal H3A 1M8 Canada Was born in Montreal Canada on 14 September 1966. He received the B. Eng. degree in electrical engineering from Concordia University Montreal Canada in 1989. He is at present completing the M.A.Sc. degree in electrical engineering at Concordia University. (S'75–S'79–M'79–SM'86) received the Ph.D. degree from Southern Methodist University Dallas TX in 1979. He spent the next two years working as a Visiting Professor in Egypt after which he moved to Ottawa Canada in 1982. He assumed teaching and research positions in Carleton and Manitoba Univerities and later moved to Concordia University Montreal Canada in 1983 where he is now a Professor in the Electrical and Computer Engineering Department. He has published numerous papers in IEEE and international journals in the areas of spread spectrum and networking. He is a well-known expert in these areas and serves as a consultant to many companies. His current research interests include wide-band metropolitan networks switching architectures and performance of on-board multibeam satellites acquisitionless CDMA networks code distribution and orthogonalization of CDMA signals responsive congestion control for ATM-based networks ARQ techniques and investigation of the novel SUGAR CDMA systems in fading channels. Dr. Elhakeem is a Senior Member of the Canadian Electrical Engineering Society and Armed Forces Association. He has chaired numerous technical sessions in IEEE Conferences was the Technical Program Chairman for IEEE Montech 1986 Montreal Canada. Dr. Elhakeem is the key guest editor of theIEEE Journal of Selected Areas in Communicationsfor the May June issues 1993 covering CDMA networks. Advanced Technology & Networks VISTAR Telecommunications Inc. Ottawa Ontario K1G 3J4 Canada An Associate Director of Advanced Technology & Networks Group VISTAR Telecommunications Inc. Ottawa Canada. He is also an Adjunct Pr

In this paper, we study the performance of a prioritized on-board baseband switch in conjunction with a multibeam satellite handling integrated services. The services considered for the analysis include voice, video, file transfer and interactive data. The prioritized switch uses both input and output buffering, switch speed-up as well as a two-phase head-of-line resolution algorithm, in order to reduce the buffer loss while maintaining acceptable user delays. The minimum required buffer capacity and switch speed-up for each service in a prioritized environment are found under uniform traffic conditions. It is shown that under uniform traffic conditions, only minimal buffering and switch speed-up are needed even for the lowest priority users. The performance dependence on the switch size is also substantially reduced with head of line resolution and buffering even in a prioritized environment.

关键词： SWITCH ON-BOARD BASEBAND MULTIBEAM PRIORITIZED HEAD-OF-LINE UNIFORM LOAD SPEED-UP

来源：评论

学校读者我要写书评

暂无评论

VIRTUAL PROTOTYPING USING KNOWLEDGE - BASED MODELING AND SIMULATION TECHNIQUES

引用

NAVAL ENGINEERS JOURNAL 1993年第3期105卷 201-212页

作者： SHEA, JG The Author:holds bachelor and master of engineering degrees in mechanical engineering a M.Eng. in engineering management and is currently fulfilling requirements for the M.S. and Ph.D. degrees in computer science at the University of Louisville. He is employed as program manager Phalanx Advanced Engineering Development at the Naval Ordnance Station Crane Div. NavSurfWarCen Louisville Ky. During his tenure with Phalanx Mr. Shea has contributed to system reliability improvement system performance upgrading and the development of the Phalanx HOL (RISC) Computer. Mr. Shea is a member of ASNE the Institute of Electrical and Electronics Engineers American Institute of Aeronautics and Astronautics Society for Computer Simulation International Test & Evaluation Association and the Military Operations Research Society.

Knowledge-based modeling and simulation bridges the gap between ''conventional'' artificial intelligence implementations (such as expert systems) and more traditional computer-aided design techniques. We are currently developing software, whose primary function is to capture a user-input design specification and produce a ''virtual'' rapid prototvpe in the form of executable rule-based code. This code can then be exercised either as an interactive part of a hardware-in-the-loop testbed simulator or as a component of an object-oriented ''behavioral'' simulation environment. While the Phalanx Testbed is the immediate beneficiary of this work, the techniques described have a wide range of application in the modeling of conceptual design and performance characteristics. This paper describes the system architecture and software tools that we are applying to generate virtual rapid prototypes for use in the Phalanx Testbed. Particular attention is paid to defining the intelligent knowledge-capture mechanisms and model generation methodologies that we are using to translate design knowledge and performance requirements into rule-based simulations. The object-oriented programming approach to the merging of ''new'' data with previouslv-captured and stored data is discussed, and the issues of verifying and validating prototypes generated using such partiallv ''reengineered'' models are examined. An application currently in use as an investigative prototype for testbed development, a simple position controller servomechanism used to control the azimuth angle of a target-tracking sensor, is used to illustrate the process.

关键词：

来源：评论

学校读者我要写书评

暂无评论

FFG-61 PROTOTYPE DIGITAL TECHNICAL LIBRARY

引用

NAVAL ENGINEERS JOURNAL 1992年第2期104卷 58-68页

作者： VINROOT, CA ORNER, JG USN Capt. Charles A. Vinroot USN (Ret.)retired from the U.S. Navy in September 1991 following over 27 years of active duty as an engineering duty officer. He holds a BSEE from North Carolina State University and a MSEE and professional degree from the U.S. Naval Postgraduate School. During his naval career he served on USSIndependence (CVA-62) and USSLuce (DLC-7/DDC-38). He also served at Supship Quincy Mass. and Hunters Point Naval Shipyard. He was stationed in Washington D.C. with assignments at CNO (OP 98) ASN (S&L) and the Naval Sea Systems Command. Captain Vinroot was technical director of the Battleship Reactivation Program (PMS 378) technical director of the Destroyer Acquisition Program (PMS 389) and deputy program manager of the Amphibious Warfare and Strategic Sealift Program (PMS 377). Most recently he served as program manager for Gas Turbine Surface Combatants (PMS 314) and Surface Combatants (PMS 330). Captain Vinroot is now employed by PRC Inc. and serves as technical director for the Advanced Technology Division in Crystal City Va. Jeffery G. Ornergraduated from Wittenberg University in Springfield Ohio in 1979 with a bachelor of arts degree in political science and earned a master's of science degree in business from The American University in Washington D.C. in 1982. He has ten years of professional experience with the Naval Sea Systems Command in positions with responsibilities for logistic support planning policy and delivery computer-aided acquisition and logistic support and Fleet Modernization Program (FMP) and ship construction issues. He was a key player in establishing the current FMP integrated logistic support (ILS) process and in implementing of the Ships' Configuration and Logistic Support Information System (SCLSIS). His current position as Fleet Logistic Support Branch head for the Surface Combatant Program includes responsibility for logistic support and management of ship configuration and logistic data for all surface combatant ships (except for Aegis ships). In

USS Ingraham (FFG-61) is the prototype ship for NavSea's Advanced Technical Information system (ATIS). ATIS is a digital technical library, which holds on optical disks the ship's 2,000 technical manuals and 73,000 drawing sheets. It contains a detailed ship's configuration index (derived from SCLSIS) to lead the user to the proper drawing or manual, and it replaces the ship's aperture cards and the second (library) copy of the technical manuals. ATIS, and the data standards established and tested through ATIS development, will be the technical library portion of micro-SNAP and SNAP III. It also forms an important part of NavSea's plans to utilize EDMICS data. This paper describes the goals and technical concepts behind the development of ATIS. Problems encountered, solutions developed, and lessons learned are detailed. Special attention was paid to the application of the computer Aided Acquisition and Logistic Support (CALS) standards, problems caused by conflicts and ambiguities in those standards, the standards. Original program goals are compared with actual operational experiences. Plans for future expansion are outlined, including applications of this technology in the availability planning and execution process. A comparison is developed among the various methods of optical imaging and their costs and benefits.

关键词： Information Retrieval systems

来源：评论

学校读者我要写书评

暂无评论

An approach to blind equalization of non-minimum phase systems

An approach to blind equalization of non-minimum phase syste...

引用

International Conference on Acoustics, Speech, and Signal Processing (ICASSP)

作者： W.A. Sethares R.A. Kennedy Z. Gu Department of Electrical and Computer Engineering University of Wisconsin Madison WI USA Department of System Engineering RSPhysSE and Interdisciplinary Engineering Program Faculty of Science Australian National University Canberra ACT Australia

Blind equalization of systems which contain a nonminimum phase component is a difficult task. Minimizing the energy (l/sub 2/ minimization) of the equalizer output (under a fixed tap constraint) cannot be guaranteed to open the eye (to reliably unscramble the message) because it tends to converge to an equalizer setting that contains a reflection of the unstable zeros inside the unit circle. It is shown that, in at least one simple setup involving a mixture of minimum and nonminimum phase elements, an l/sub infinity / minimization of the equalizer output is the appropriate criterion which should be minimized in order to successfully open the eye. Utilizing a finite impulse response equalizer constrained to have a unity coefficient on the center tap, it is shown that for a large enough dimension (depending on the closeness of the zeros of the channel to the unit circle) the eye will be opened. There is no simple (gradient) scheme to exactly implement the l/sub infinity / minimization. The use of a gradient l/sub p/ scheme for large p is proposed.< >

关键词： Blind equalizers Finite impulse response filter Australia Council Information science Predistortion Distortion Cellular neural networks Quadrature amplitude modulation Stability

来源：评论

学校读者我要写书评

暂无评论

FULL-WAVE SOLUTION OF DIELECTRIC LOADED WAVE-GUIDES AND SHIELDED MICROSTRIPS UTILIZING FINITE-DIFFERENCE AND THE CONJUGATE-GRADIENT METHOD

引用

INTERNATIONAL JOURNAL OF MICROWAVE AND MILLIMETER-WAVE computer-AIDED engineering 1991年第4期1卷 346-357页

作者： NARAYANAN, V MANELA, M LADE, RK SARKAR, TK Department of Electrical and Computer Engineering Syracuse University Syracuse New York 13244-1240 Viswanathan Narayanan was born in Bangalore India on December 14 1965. He received the BE degree in Electronics and Communications from B.M.S. College of Engineering Bangalore in 1988. He joined the Department of Electrical Engineering at Syracuse University for his graduate studies in 1989 where he is currently a research assistant. His research interests are in microwave measurements numerical electromagnetics and signal processing. Biographies and photos are not available for M. Manela and R. K. Lade. Tapan K. Sarkar (Sf69-M'76-SM'X1) was born in Calcutta. India on August 2 1948. He received the BTech degree from the Indian Institute of Technology Kharagpur India in 1969 the MScE degree from the University of New Brunswick Fredericton Canada in 1971. and the MS and PhD degrees from Syracuse University. Syracuse NY in 1975. From 1975-1976 he was with the TACO Division of the General Instruments Corporation. He was with the Rochester Institute of Technology (Rochester NY) from 1976-1985. He was a Research Fellow at the Gordon Mckay Laboratory Harvard University Cambridge MA from 1977 to 1978. He is now a Professor in the Department of Electrical and Computer Engineering Syracuse University. His current research interests deal with numerical solutions of operator equations arising in electromagnetics and signal processing with application to system design. He obtained one of the “ best solution” awards in May 1977 at the Rome Air Development Center (RADC) Spectral Estimation Workshop. He has authored or coauthored more than 154 journal articles and conference papers and has written chapters in eight books. Dr. Sarkar is a registered professional engineer in the state of New York. He received the Best Paper Award of the IEEE Transactions on Electromagnetic Compatibility in 1979. He was an Associate Editor for feature articles of the lEEE Antennas arid Propagation Sociefy Newsletter and was

Dynamic analysis of waveguide structures containing dielectric and metal strips is presented. The analysis utilizes a finite difference frequency domain procedure to reduce the problem to a symmetric matrix eigenvalue problem. Since the matrix is also sparse, the eigenvalue problem can be solved quickly and efficiently using the conjugate gradient method resulting in considerable savings in computer storage and time. Comparison is made with the analytical solution for the loaded dielectric waveguide case. For the microstrip case, we get both waveguide modes and quasi-TEM modes. The quasi-TEM modes in the limit of zero frequency are checked with the static analysis which also uses finite difference. Some of the quasi-TEM modes are spurious. This article describes their origin and discusses how to eliminate them. Numerical results are presented to illustrate the principles.

关键词： Waveguides

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：