检索结果-内蒙古大学图书馆

Enhanced Far-Field Localization Scheme Using Multi-RIS and Efficient Beam Sweeping

Progress In Electromagnetics Research C 2024年 140卷 163-175页

作者： Alhafid, Abdulrahaman Kh. Younis, Sedki Ali, Y. E. Mohammed Electrical Engineering Department College of Engineering University of Mosul Mosul Iraq Computer and Information Engineering Department College of Electronics Engineering Ninevah University Mosul Iraq Computer and Communications Engineering Department College of Engineering Nawroz University KRG Duhok Iraq

Future 6G networks are anticipated to use reconfigurable intelligent surfaces (RISs) because of their capability to expand coverage, provide a customizable wireless environment, increase localization accuracy, etc. In this paper, RIS-aided localization is considered with orthogonal frequency division multiplexing (OFDM) and single-input single-output (SISO) downlink system in millimeter-wave (mmWave). An efficient beam sweeping (EBS) scheme is proposed accomplished by an RIS to scan the area of interest and estimate the direction of the user equipment (UE), i.e., the signal’s angle of departure (AoD). The AoD with the measured signal time of arrival (ToA), from the RIS to the UE, is used to estimate the UE position. The ToA measurements can be obtained by exploiting the OFDM signal, while the beam sweeping can be obtained by carefully designing the RIS phase profile. The first step of the proposed EBS scheme is to scan the whole area of interest with equally spaced beam angles for coarse estimation of AoD. Then, based on this estimation, the RIS is reconfigured to sweep a slight angle’s range by narrow beams to refine the AoD estimation. Besides, a multi-RIS scenario is proposed, and leveraging the EBS and the consensus fusion method is used to obtain accurate position estimation. Simulation results demonstrate that the proposed EBS in single and multi-RIS scenarios enhances positioning accuracy compared to linear beam sweeping (LBS) methods. Also, the impact of increasing the number of RIS elements and number of sweeping beams, as well as the number of RISs, is investigated thoroughly via numerical simulations. Furthermore, the achievable localization accuracy is assessed using the positioning error bound (PEB). © 2024, Electromagnetics Academy. All rights reserved.

关键词： Millimeter waves

来源：评论

学校读者我要写书评

暂无评论

Novel methodology for apple leaf disease classification with PCNN-IELM

引用

Neural Computing and Applications 2025年第6期37卷 4895-4913页

作者： Navpreet Roul, Rajendra Kumar Department of Computer Science and Engineering Thapar Institute of Engineering and Technology Punjab Patiala147004 India

Agriculture is crucial to the global economy, particularly in ensuring food security. Recent trends indicate that various plant diseases are causing substantial financial losses in the agricultural sector worldwide. Traditional manual inspection methods for detecting fruit and plant diseases are labor-intensive and inefficient. Adopting automated disease detection technologies could significantly enhance early diagnosis and reduce the economic impact of these diseases on agriculture. This study introduces an advanced model for classifying apple diseases by integrating a pre-trained convolutional neural network (PCNN), such as VGG16, VGG19, or ResNet50, with an incremental extreme learning machine (I-ELM) for efficient feature extraction and classification. A key innovation of this model is replacing the PCNN’s fully connected layer with the I-ELM, which eliminates the lengthy back-propagation process and significantly reduces training time. Integrating I-ELM with PCNN harnesses the rapid learning capabilities and robust generalization of I-ELM with the superior feature extraction abilities of CNNs. I-ELM simplifies the network architecture by avoiding the complex neural networks commonly used in other methods. The model’s effectiveness is rigorously evaluated on the well-known Plant Village dataset, demonstrating its ability to identify various apple diseases through performance metrics such as precision, sensitivity, specificity, accuracy, and the F1-score. Comparing existing deep learning models using these metrics highlights its superior performance. This innovation is up-and-coming for intelligent agricultural systems, offering an effective solution for classifying apple diseases and enabling timely and innovative farming practices. © The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2024.

关键词： Fruits

来源：评论

学校读者我要写书评

暂无评论

The consequences of eye tracking on brain and heart coherence

引用

Multimedia Tools and Applications 2024年第38期83卷 86025-86035页

作者： Attar, Eyad Talal Department of Electrical and Computer Engineering Faculty of Engineering King Abdulaziz University Jeddah21589 Saudi Arabia

When the eye uses the brain and heart, the cardiovascular and nervous systems integrate and interact. Because changes in retinal microcirculation are independent predictors of cardiovascular events, the eye serves as a "display" to the cardiovascular system and brain. The eye, which has two circulatory systems and a rich vascular supply, is a prime candidate for this study and benefits from early damage to the target organ. Eye movements performed during the visual search pose a challenge in identifying critical points in the eye scene. Because it uses different brain pathways and relates to the cardiac cycle, humans’ ability to spot anomalies under challenging circumstances means they are always needed for visual search. ECG (electrocardiogram), electroencephalogram (EEG), and eye tracking can improve visual search training and attention-tracking performance. EEG data can also be analyzed in real time using eye-tracking technology. Previous work has discussed the EEG or ECG concerning attraction during visual search. The eyeball’s movement combined with the ECG in the previous investigation and introduced large electroencephalographic (EEG) artifacts. This assessment aims to (a) identify brain–heart coherent features influenced by the visual search task and (b) discover the behavior of EEG frequency bands and heart rate variability (HRV) features. EEG and ECG were used to analyze and predict inattention in individuals during a visual search task. The EEG determines human brain function and considers to detect the variability in the EEG frequency band. The work proposed a visual search task with EEG and ECG analysis. Five participants recorded EEG and ECG recordings in three different scenarios: rest, gaze tracking, and normal. Statistical evaluation was used to compare EEG and ECG characteristics and Pearson’s correlation was employed for statistical analysis. Statistical ANOVA analysis revealed statistically significant (p > 0.05) differences between theta (F3) an

关键词： Electrocardiograms

来源：评论

学校读者我要写书评

暂无评论

Cultivating road safety: A comprehensive examination of intelligent ensemble-based road crack detection

引用

Multimedia Tools and Applications 2025年第12期84卷 10747-10780页

作者： Navpreet Roul, Rajendra Kumar Rani, Rinkle Department of Computer Science and Engineering Thapar Institute of Engineering & Technology Punjab Patiala147004 India

Detecting and promptly identifying cracks on road surfaces is of paramount importance for preserving infrastructure integrity and ensuring the safety of road users, including both drivers and pedestrians. Presently, the predominant approach for crack detection relies on labor-intensive and costly manual inspections, exacerbated by the enduring challenge of concrete road cracks susceptible to environmental factors like temperature fluctuations, heavy traffic loads, and prolonged exposure to harsh weather conditions. This paper presents a comprehensive research initiative aimed at advancing road crack detection techniques. The proposed method leverages a classical Convolutional Neural Network (CNN) in conjunction with the Extreme Learning Machine (ELM) for efficient feature extraction and classification. A pivotal breakthrough is achieved by replacing the fully connected layer of the CNN with ELM, thus circumventing the time-consuming backpropagation process and significantly expediting the training process. This integration harnesses ELM’s swift learning capabilities and strong generalization performance, complemented by the CNN’s exceptional feature extraction abilities. The model’s effectiveness is rigorously assessed using the wide recognized CCIC, SDNET2018, and Synthesized datasets, and its proficiency in distinguishing between Crack and No-Crack regions is demonstrated through various performance metrics. Furthermore, the model’s performance is benchmarked against existing deep learning models using these performance metrics, showcasing its superior performance. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2024.

关键词： Roads and streets

来源：评论

学校读者我要写书评

暂无评论

A lightweight and efficient model for botnet detection in IoT using stacked ensemble learning

引用

Soft Computing 2025年第1期29卷 89-101页

作者： Esmaeilyfard, Rasool Shoaei, Zohre Javidan, Reza Department of Computer and Information Technology Engineering Shiraz University of Technology Shiraz Iran

Efficient botnet detection is of great security importance and has been the focus of researchers in recent years. Botnet detection is also a difficult task due to the difficulty in distinguishing it from normal traffic. At the same time, detecting these botnets require a lot of computation resources using traditional methods and this limitation makes it even more difficult to detect them on Internet of Things (IoT) devices. Considering the massive IoT data, an efficient and lightweight approach for detecting and predicting IoT botnet attacks is required. In this paper, multiple lightweight machine learning methods including a deep Multilayer Perceptron (MLP) method and a Random Forest (RF) method are integrated into a stacked ensemble learning model to detect botnet attacks in IoT devices. This integration is based on applying lasso regression on features and utilizing a logistic regression in ensemble learning, which leads to increasing the accuracy of botnet detection and reducing its computational complexity. The performance evaluation of the proposed model is examined from two perspectives: accuracy and lightweight characteristics;and for this purpose, a real-world UNSW (BoT-IoT) dataset is used. A comparative study with competitive neural network methods demonstrates that our approach delivers a better outcome. Experimental results reveal that this method has a higher efficiency in all metrics than competing methods including accuracy, precision, recall, and F1 score with values of 99.3%, 99.2%, 99%, and 99.1%, respectively. Besides, the results showed that the proposed method requires at least 36% less CPU and 38% less memory compared to the competing methods, which makes the proposed method to be suitable for IoT devises with limited resources. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2025.

关键词： Bot (Internet)

来源：评论

学校读者我要写书评

暂无评论

A 28.8-mW Accelerator IC for Dark Channel Prior-Based Blind Image Deblurring

引用

IEEE Journal of Solid-State Circuits 2024年第6期59卷 1899-1911页

作者： Chen, Po-Shao Chen, Yen-Lung Lee, Yu-Chi Fu, Zih-Sing Yang, Chia-Hsiang Graduate Institute of Electronics Engineering National Taiwan University Taipei10617 Taiwan University of Michigan Department of Electrical Engineering and Computer Science Ann ArborMI48109 United States Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science CambridgeMA02139 United States National Taiwan University Department of Electrical Engineering Graduate Institute of Electronics Engineering Taipei10617 Taiwan

This work presents an accelerator that performs blind deblurring based on the dark channel prior. The alternating minimization algorithm is leveraged for latent image and blur kernel estimation. A 2-D Laplace equation solver is embedded to reduce the latency by 56% for boundary wrapping. For latent image estimation, gradient data locality is employed to reduce the latency by 57%. A sorting engine is designed to reduce the latency in data access by 96% for calculating the dark channel. A pipelined mixed-radix 1-D fast Fourier transform (FFT) engine is used for efficient latent image estimation and blur kernel estimation. By employing image size approximation, 85% of additions and 97% of multiplications for FFT can further be saved. In the blur kernel estimator, a 2-D convolution engine with a parallel architecture is implemented, reducing the latency by 79%. The accelerator supports blur kernels of 25times 25 and 49times 49 pixels for blurred images of 129times 129 and 257times 257 pixels, respectively. Fabricated in 40-nm CMOS, the accelerator's core area is 3.98 mm2. The chip dissipates 28.8 mW at 65 MHz from a 0.65-V supply. It can estimate a blur kernel of 25times 25 pixels for an image patch with 129times 129 pixels for deblurring a full-HD image in 1.7 s, achieving a 2562times shorter latency than a high-end CPU. Compared with the state-of-the-art design, the chip achieves a four times higher normalized area efficiency and a 7.5times higher normalized energy efficiency. © 1966-2012 IEEE.

关键词： CMOS integrated circuits

来源：评论

学校读者我要写书评

暂无评论

Leveraging feature fusion ensemble of VGG16 and ResNet-50 for automated potato leaf abnormality detection in precision agriculture

引用

Soft Computing 2025年第4期29卷 2263-2277页

作者： Trivedi, Amit Kumar Mahajan, Tripti Maheshwari, Tanmay Mehta, Rajesh Tiwari, Shailendra Department of Computer Science and Engineering Thapar Institute of Engineering and Technology Punjab Patiala147001 India

In the era of advancement in technology and modern agriculture, early disease detection of potato leaves will improve crop yield. Various researchers have focussed on disease due to different types of microbial infection in potato leaves using computer vision and machine learning approaches. In this paper, a data science approach for multiclass classification of potato normal and abnormal leaves due to fungal infection like early blight and late blight is performed using the ensembling of deep learning (DL) CNN models. Firstly, the performance of classification on potato disease is verified separately on VGG16 and ResNet-50 CNN models after pre-processing of the leaf dataset. The pre-processing includes noise removal and normalization. Further improvement in classification accuracy is achieved by the ensembling of VGG16 and ResNet-50 CNN models. The ensembling of CNN models is performed on the feature level by fusing features extracted using VGG16 and ResNet-50. From the experimental results, performed on publicly available datasets consisting of 2152 number of normal and abnormal images it is observed that the average classification accuracy of 98.22%, 96.16% and 95.68% is achieved using the proposed ensemble, VGG16 and ResNet-50 models respectively. The efficacy of the proposed approach (ensemble technique at feature level fusion) is verified in comparison with recently reported DL model-based approaches. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2025.

关键词： Classification (of information)

来源：评论

学校读者我要写书评

暂无评论

Steady-state linear Kalman filter-based FLL control for DSTATCOM with optimized PI gains

引用

Neural Computing and Applications 2024年 1-21页

作者： Pandya, Hardik M. Arya, Sabha Raj Giri, Ashutosh K. Department of Electrical Engineering Sardar Vallabhbhai National Institute of Technology Surat395007 India Department of Electrical Engineering Government Engineering College Bharuch392002 India

Steady-state linear Kalman filter-based frequency locked loop control algorithm is introduced to operate distribution static compensator in distribution system which utilizes Kalman filter theory which employs the dynamic state space vectors with its input signal frequency close to its nominal value resulting in low computational burden to determine the noisy parameters with uncertainty. Moreover, steady-state linear Kalman filter provides faster dynamic response which can be observed in tracking of the actual and reference signal in zero-voltage regulation mode within 3 cycles as compared to its counterpart of synchronous reference frame with stability. In reckoning the fine tuning of PI gains for maintaining the value of the AC terminal voltages, two methods, namely crayfish optimization algorithm and particle swarm optimization, have been implemented and their responses are compared for various parameters like peak overshoot, rise time, and fall time. The proposed filter is assessed by MATLAB model and hardware analysis on a digital signal processor in real time which shows the results of the steady-state and dynamic conditions with DC PI settling within two cycles and as per the standards of IEEE 519-2014. © The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature 2024.

关键词： Particle swarm optimization (PSO)

来源：评论

学校读者我要写书评

暂无评论

Resource-specific Orders in European Day-ahead Market Under Different Pricing Rules

引用

Journal of Modern Power Systems and Clean Energy 2023年第3期11卷 757-769页

作者： Ilias G.Marneris Andreas V.Ntomaris Pandelis N.Biskas Grigorios A.Dourbois Department of Electrical and Computer Engineering Aristotle University of ThessalonikiThessaloniki 54124Greece

This paper addresses two issues that concern the electricity market participants under the European day-ahead market(DAM)framework,namely the feasibility of the attained schedules and the non-confiscation of cleared *** address the first issue,new resource-specific orders,i.e.,thermal orders for thermal generating units,demand response orders for load responsive resources,and energy limited orders for storage resources,are proposed and incorporated in the existing European DAM clearing *** address the second issue,two approaches which lead to a non-confiscatory market are analyzed:①discriminatory pricing with side-payments(***);and②non-discriminatory pricing excluding out-ofmoney orders(European paradigm).A comparison is performed between the two approaches to investigate the most appropriate pricing rule in terms of social welfare,derived revenues for the sellers,and efficiency of the attained *** proposed model with new resource-specific products is evaluated in a European test system,achieving robust *** feasibility of the attained schedules is demonstrated when using resource-specific orders compared with block ***,the results indicate the supremacy of discriminatory pricing with side-payments compared with the current European pricing rule.

关键词： Day-ahead market demand response energy storage non-confiscatory market pricing thermal order

来源：评论

学校读者我要写书评

暂无评论

Scheduling a Single-Arm Multi-Cluster Tool With a Condition-Based Cleaning Operation

引用

IEEE/CAA Journal of Automatica Sinica 2023年第10期10卷 1965-1983页

作者： Qinghua Zhu Hongpeng Li Cong Wang Yan Hou School of Computer Science and Technology Guangdong University of TechnologyGuangzhou 510006China Department of Electrical and Computer Engineering New Jersey Institute of TechnologyNewarkNJ 07102-1982 USA

As wafer circuit widths shrink less than 10 nm,stringent quality control is imposed on the wafer fabrication processes. Therefore, wafer residency time constraints and chamber cleaning operations are widely required in chemical vapor deposition, coating processes, etc. They increase scheduling complexity in cluster tools. In this paper, we focus on scheduling single-arm multi-cluster tools with chamber cleaning operations subject to wafer residency time constraints. When a chamber is being cleaned, it can be viewed as processing a virtual wafer. In this way, chamber cleaning operations can be performed while wafer residency time constraints for real wafers are not violated. Based on such a method, we present the necessary and sufficient conditions to analytically check whether a single-arm multi-cluster tool can be scheduled with a chamber cleaning operation and wafer residency time constraints. An algorithm is proposed to adjust the cycle time for a cleaning operation that lasts a long cleaning ***, algorithms for a feasible schedule are also *** an algorithm is presented for operating a multi-cluster tool back to a steady state after the cleaning. Illustrative examples are given to show the application and effectiveness of the proposed method.

关键词： Chamber cleaning multi-cluster tools scheduling semiconductor manufacturing

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：