检索结果-内蒙古大学图书馆

IEEE Transactions on intelligent Vehicles 2024年 1-11页

作者： Wang, Yan Hu, Fengqing Tian, Cheng Li, Panshuo Huang, Hailong Yin, Guodong Huang, Chao Department of Industrial and System Engineering The Hong Kong Polytechnical University Hong Kong Department of Aeronautical and Aviation Engineering The Hong Kong Polytechnical University Hong Kong School of Automation and the Guangdong Provincial Key Laboratory of Intelligent Decision and Cooperative Control Guangdong University of Technology Guangzhou China School of Mechanical Engineering Southeast University Nanjing China

Sideslip angle and vehicle velocity are crucial for both traditional and autonomous vehicles. They play essential roles in chassis stability control, as well as in tasks such as path planning and tracking control. However, these states cannot be directly measured by onboard sensors, therefore various vehicle state estimation algorithms have been developed. Most of these algorithms assume that the noise characteristics are known, ignoring the impact of missing measurement data, and cannot simultaneously handle the effects of colored noise and white noise. To address these issues, we propose a fault-tolerant extended Kalman filter network (FTEKFNet), which integrates both physics-based and data-driven methods for vehicle state estimation. Based on the Fault Tolerant Extended Kalman Filter (FTEKF) iterative framework, a pre-trained artificial neural network is utilized to directly predict the Kalman gain, and it is combined with FTEKF to form FTEKFNet. Experimental results under different conditions demonstrate that FTEKFNet can simultaneously deal with unknown noise and data loss problems and has good adaptability to color noise. The estimation performance of the proposed algorithm is better than the traditional FTEKF and EKF methods. IEEE

关键词： Extended Kalman filters

来源：评论

学校读者我要写书评

暂无评论

Oscillation Suppression Method based on Power control Optimization of the Wind Farms 3

Oscillation Suppression Method based on Power Control Optimi...

引用

3rd IEEE International Power Electronics and Application Conference and Exposition, PEAC 2022

作者： Yang, Jiaqi Wang, Shaojun Li, Zhen Tian, Xu Liu, Bin Liu, Xiangdong Beijing Institute of Technology School of Automation Beijing China Co.Ltd Bayannur Power Supply Bureau Inner Mongolia China State Key Laboratory for Intelligent Control and Decision of Complex Systems Beijing China Beijing University of Mining and Technology Beijing Electric Engineering and Automation Beijing China Tsinghua University Department of Electrical Engineering Beijing China

ISBN: (数字)9781665491419

ISBN: (纸本)9781665491419

Oscillation issues in the grid-connected wind farm system can severely deteriorate the power system security and lead to serious damage. Based on the impedance analysis method, many oscillation suppression methods have been proposed for reshaping the impedance characteristics of system to avoid the risk of oscillations. However, modifying converters' controllers to reshape the wind turbines (WTs) impedance and usage of additional damping devices for reshaping the grid impedance both are time-consuming and costly. Therefore, based on the sequence impedance model of the grid-connected wind farm system, this paper proposes a novel oscillation suppression method by optimizing the power control of wind farm. The system stability margin can be improved by modifying the number of online WTs and the output power of each WT to reshape the impedance of wind farm, under the precondition that the output power demand of wind farm is satisfied. Then, the intelligent particle swarm optimization (PSO) algorithm is used to solve the optimization approach to obtain the number of online WTs with optimal stability margin. Finally, the simulation confirms the effectiveness of the proposed oscillation suppression method. © 2022 IEEE.

关键词： system stability

来源：评论

学校读者我要写书评

暂无评论

A Hybrid Wind Power Prediction Model Based on Seasonal Feature Decomposition and Enhanced Feature Extraction

SSRN

引用

SSRN 2024年

作者： Li, Weipeng Chong, Yuting Guo, Xin Liu, Jun School of Automation and Information Engineering Xi’an University of Technology No. 5 Jinhua South Road Shaanxi Xi’an710048 China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing No. 5 Jinhua South Road Shaanxi Xi’an710048 China

Efficient and accurate wind power prediction is crucial for enhancing the reliability and safety of power system operation and management. The integration of advanced data-driven forecasting methods with precise and efficient data feature decomposition and extraction techniques is necessary to improve the accuracy of wind power generation prediction, due to the inherent randomness and nonlinearity of physical states impacting wind power output, as well as the abundance of redundant information in their original measurement data. This paper proposes a novel hybrid wind power prediction model based on seasonal feature decomposition of wind energy data and enhanced feature extraction. Its effectiveness and superiority are demonstrated through comprehensive multi-model comparisons. © 2024, The Authors. All rights reserved.

关键词： Wind power

来源：评论

学校读者我要写书评

暂无评论

Model predictive control of event triggering in silicon single crystal growth processes

Model predictive control of event triggering in silicon sing...

引用

Chinese Automation Congress (CAC)

作者： Yankai Li Biao Ren Ding Liu Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi’an University of Technology Xi’an China

In this paper, the control issue of the semiconductor silicon monocrystalline growth process is studied through an event triggered model prediction approach. Firstly, a state-space model of silicon monocrystalline growth process is developed to describe the energy conversion and the dynamics and the geometry of the isodiametric stage silicon monocrystalline via the Czochralski method. Secondly, a small perturbation linearization is used to obtain a linear continuous model, which is translated into a linear discrete model under zero-order retainers. Finally, an event triggered model prediction controller is established to decrease the calculation of model prediction in the rolling optimization process. Based on experimental results, the event-triggered model prediction control algorithm is confirmed to be an effectively control scheme for the silicon monocrystalline growth process.

关键词： Crystal growth Semiconductor device modeling Computational modeling Photonic crystals Predictive models Prediction algorithms Silicon

来源：评论

学校读者我要写书评

暂无评论

Simulation and analysis of far-field single-photon response model in Geiger avalanche mode 7

Simulation and analysis of far-field single-photon response ...

引用

7th Global intelligent Industry Conference, GIIC 2024

作者： Ou, Hengchang Ma, Le Jiang, Peng Wang, Pengfei Lu, Jie Zhou, Xin Sun, Jianfeng National Key Laboratory of Laser Spatial Information Institute of Opto-Electronic Harbin Institute of Technology Heilongjiang Harbin150001 China Science and Technology on Complex System Control and Intelligent Agent Cooperation Laboratory Beijing100074 China Beijing Institute of Remote Sensing Beijing100854 China 44th Research Institute China Electronics Technology Group Corporation Chongqing400060 China Research Center for Space Optical Engineering Harbin Institute of Technology Heilongjiang Harbin150001 China Zhengzhou Research Institute of Harbin Institute of Technology Zhengzhou Henan450046 China

ISBN: (纸本)9781510682986

Poisson distribution model is the basis of data analysis for GM-APD lidar, but it is only applicable to the mirror reflected target under ideal conditions, and cannot accurately describe the photon triggering process of actual GM-APD lidar detection. For the actual target with rough surface, the negative binomial distribution with M as the parameter can describe the photon distribution model more accurately. In order to solve this problem, this paper compares and analyzes Poisson distribution triggering model and the negative binomial distribution triggering model that conforms to the triggering situation of the echo signal of the target with rough surface, considering the differences in the triggering probability under different noise and signal levels. The results show that the trigger probability curve corresponding to the trigger model based on negative binomial distribution is lower in peak value, wider in bottom value and fatter overall than that of the trigger model based on Poisson distribution, and the difference between the two is more prominent under the conditions of low noise level and high signal level. This study has guiding significance for the signal extraction research based on different surface echoes. © 2024 SPIE.

关键词： Photons

来源：评论

学校读者我要写书评

暂无评论

Self-triggered Resilient Stabilization of Linear systems with Quantized Output

arXiv

引用

arXiv 2023年

作者： Liu, Wenjie Wakaiki, Masashi Sun, Jian Wang, Gang Chen, Jie Key Lab of Intelligent Control and Decision of Complex Systems Beijing Institute of Technology Beijing100081 China Beijing Institute of Technology Chongqing Innovation Center Chonqing401120 China Graduate School of System Informatics Kobe University Hyogo657-8501 Japan Department of Control Science and Engineering Tongji University Shanghai201804 China

This paper studies the problem of stabilizing a self-triggered control system with quantized output. Employing a standard observer-based state feedback control law, a self-triggering mechanism that dictates the next sampling time based on quantized output is co-developed with an output encoding scheme. If, in addition, the transmission protocols at the controller-to-actuator (C-A) and sensor-to-controller (S-C) channels can be adapted, the self-triggered control architecture can be considerably simplified, leveraging a delicate observer-based deadbeat controller to eliminate the need for running the controller in parallel at the encoder side. To account for denial-of-service (DoS) in the S-C channel, the proposed output encoding and self-triggered control schemes are further made resilient. It is shown that a linear time-invariant system can be exponentially stabilized if some conditions on the average DoS duration time are met. There is a trade-off between the maximum inter-sampling time and the resilience against DoS attacks. Finally, a numerical example is presented to demonstrate the practical merits of the proposed self-triggered control schemes and associated theory. © 2023, CC BY.

关键词： controllers

来源：评论

学校读者我要写书评

暂无评论

Safe RL-based Adaptive Cooperative Game control of Wing Deformation and Flight State Tracking for Morphing Hypersonic Vehicles

引用

IEEE Transactions on Aerospace and Electronic systems 2025年

作者： Wang, Jun-Wei Wang, Feng Wu, Huai-Ning Liu, Zhou-Yang University of Science and Technology Beijing School of Intelligence Science and Technology Beijing100083 China Beihang University School of Automation Science and Electrical Engineering Beijing100191 China Beihang University Hangzhou International Innovation Institute Hangzhou311115 China National Key Laboratory of Complex System Control and Intelligent Agent Cooperation Beijing100074 China

This study addresses the issue of adaptive cooperative game control (ACGC) design for wing deformation and flight state tracking of morphing hypersonic vehicles (MHVs) with variable wing shapes, input constraints and state constraints. To access a better flight control performance, the wing deformation parameter is extended in this work as an auxiliary control input. An oriented-coordinated-control nonlinear differential equation model is first established to describe the complicated longitudinal flight state tracking error dynamics of the MHV. Then, a control barrier function (CBF) is introduced and incorporated into the value function as a risk penalty term of state security constraint. Based on the differential game (DG) theory, the optimal coordinated control problem for the MHV with input constraints and state constraints is treated as a constrained cooperative DG that is further formulated as a Hamilton-Jacobi-Bellman (HJB) equation with barrier and hyperbolic functions. A safe RL algorithm is proposed to solve the above HJB equation and an online Pareto joint control strategy is achieved thereby. Hereafter the stability analysis of the closed-loop state tracking error system is done by the Lyapunov technique. Meanwhile, both state and input constraints are met during the the parameter learning regulation process. At last, a simulation study is performed to support the proposed safe RL-ACGC algorithm. © 2025 IEEE.

关键词： Hyperbolic functions

来源：评论

学校读者我要写书评

暂无评论

Research on UAV Detection Technology of Gm-APD Lidar Based on YOLO Model

Research on UAV Detection Technology of Gm-APD Lidar Based o...

引用

2021 IEEE International Conference on Unmanned systems, ICUS 2021

作者： DIng, Yuanxue Qu, Yanchen Zhang, Qing Tong, Jiahui Yang, Xianhui Sun, Jianfeng Harbin Institute of Technology National Key Laboratory of Science and Technology on Tunable Laser Institution of Opto-Electronics Harbin China Beijing Electromechanical Engineering Institute Science and Technology on Complex System Control and Intelligent Agent Cooperation Laboratory Beijing China

ISBN: (纸本)9780738146577

In recent years, unmanned aerial vehicle (UAV) technology has developed rapidly, which plays an important role in both military and civil fields. While it brings convenience to all walks of life, there are also a lot of security problems. Therefore, it is necessary to study anti-UAV technology, but the detection of UAV is an important basis of anti-UAV technology. In this paper, by combining the three-dimensional range profile collected by Gm-APD (Geiger mode Avalanche Photo Diode) lidar with the deep learning method, a UAV detection method based on the improved YOLOv3 (You Only Look Once v3) network is proposed. Firstly, the data of UAV in low altitude real scene is collected by Gm-APD lidar, and range profile information is generated. Then, the YOLOv3 network is improved, and the SPP module can be added to combine the local features of the target with the global features to improve the detection accuracy. It is suitable for the detection of UAVs. Finally, the trajectory of the UAV is drawn based on the distance information. The experimental results show that the improved method can effectively detect UAV targets, and is better than the previous method, YOLOv3-Tiny method and YOLOv4 method. The farthest detection distance is 238m, the detection speed is fast, and the purpose of real-time detection and positioning can be achieved. Therefore, this method can be applied to anti-UAV technology and has important research significance. © 2021 IEEE.

关键词： Optical radar

来源：评论

学校读者我要写书评

暂无评论

Compound Fault Separation and Diagnosis Method Based on FSA-CNN and DAN

Compound Fault Separation and Diagnosis Method Based on FSA-...

引用

Fault Detection, Supervision and Safety for Technical Processes (SAFEPROCESS), CAA Symposium on

作者： Jiechao Dong Liping Yan Yuanqing Xia Key Laboratory of Intelligent Control and Decision of Complex Systems School of Automation Beijing Institute of Technology Beijing China

ISBN: (纸本)9781665401166

With the industry becoming larger and more complicated, the technology of fault diagnosis becomes more and more important. Due to the strong coupling and non-stationarity of the compound fault, the existing fault diagnosis methods cannot accurately identify all single faults’ detailed information contained in the compound fault. This paper proposes a compound fault separation and diagnosis method based on FSACNN and DAN. Firstly, in order to highlight certain frequency segments, frequency segment attention module is added to CNN. Secondly, a compound fault feature separation framework based on DAN is proposed, which can separate compound fault to two fault components accurately. Thiredly, a signature matrix is introduced into ELM to improve the performance of the classifier. Finally, ablation experiments are designed to prove the advantage of the proposed method.

关键词： Fault diagnosis Industries Couplings Fault detection Feature extraction Safety Compounds

来源：评论

学校读者我要写书评

暂无评论

Generating Waste Heat Energy from CPU Based on Thermoelectric Power Generator

Generating Waste Heat Energy from CPU Based on Thermoelectri...

引用

Chinese Automation Congress (CAC)

作者： Kun Qian Yeyun Cai Kun Xu Fang Deng School of Automation Beijing Institute of Technology Beijing China Key Laboratory of Intelligent Control and Decision of Complex Systems

ISBN: (纸本)9781665426480

Heat dissipation is extremely important for electronic component such as CPU or GPU of the computer. Now most researchers only design optimal heat sink for CPU for better heat dissipation, while few of them consider waste heat recycling of CPU. The CPU can be used as the heat source, while the original system has fan and heat sink as the cooling system. Thus, the original CPU working condition is very suitable for thermoelectric power generation and will bring great benefit to system itself. However, adding thermoelectric generator will increase the temperature of CPU, which will decrease the performance of the computer. It is necessary to reduce the hot side temperature while generating energy as much as possible. To achieve this, this paper designed a kind of intelligent waste heat generation system based on thermoelectric power generator. Three different shape heat sinks are designed, contrasted, and tested. By building experimental platform and establishing simulation model, the power of thermoelectric power generation and temperature change of the three heat sink structures are compared. The fin shaped heat sink is considered has the best output performance while keeping the hot side temperature within the acceptance range. The maximum output power is 10.67mW, and the maximum hot side temperature is 72°C during the experiment.

关键词： Temperature distribution Shape Cogeneration Generators Central Processing Unit Waste heat Trigeneration

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：