检索结果-内蒙古大学图书馆

10th IEEE International Power Electronics and Motion Control Conference, IPEMC 2024 ECCE Asia

作者： Liu, Yanjun Fang, Yifan Hu, Jiabing He, Wei Zhan, Meng Huazhong University of Science and Technology State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic Engineering China

ISBN: (纸本)9798350351330

Grid-forming converters (GFMs) are regarded as a solution to enhancing the frequency support ability of the power grid. Applying the virtual synchronous generator (VSG) technology, GFM mimics the swing function of synchronous generators (SGs). It is found in this paper, however, that the inertia provision of VSG-based grid-forming doubly-fed induction generator (VSG-DFIG) is limited. The root cause is analyzed, indicating that the resistive-inductive internal impedance is not beneficial to providing power support under unbalanced active power disturbances. To address this issue, the terminal voltage controller (TVC) is modified by adding a virtual impedance control, rather than applying supplementary controllers on the active power control sections. The virtual impedance control optimizes the characteristic of the equivalent inertia of the DFIG and strengthens the inertial response. Finally, preliminary simulation results are presented to verify the feasibility of the proposed control strategy. © 2024 IEEE.

关键词： Synchronous generators

来源：评论

学校读者我要写书评

暂无评论

Interfacial modulation of nano Li_(7)La_(3)Zr_(2)O_(12) composite electrolytes prepared by solvent-free method

引用

Green Energy & Environment 2025年第3期10卷 528-536页

作者： Qigao Han Yaqing Guo Fuhe Wang Xuechun Lou Fengqian Wang Jun Zhong Jinqiao Du Jie Tian Weixin Zhang Shun Tang Shijie Cheng Yuancheng Cao Wuhan National Laboratory for Optoelectronics Huazhong University of Science and TechnologyWuhan430074China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan430074China Shenzhen Power Supply Co.Ltd. Shenzhen518001China

Solid-state batteries(SSBs) with high safety are promising for the energy fields,but the development has long been limited by machinability and interfacial ***,self-supporting,flexible Nano LLZO CSEs are prepared with a solvent-free method at 25℃.The 99.8 wt% contents of Nano LLZO particles enable the Nano LLZO CSEs to maintain good thermal stability while exhibiting a wide electrochemical window of 5.0 V and a high Li~+ transfer number of *** mean modulus reaches 4376 *** from the interfacial modulation,the Li|Li symmetric batteries based on the Nano LLZO CSEs show benign stability with lithium at the current densities of 0.1 mA cm^(-2),0.2 mA cm^(-2),and 0.5 mA cm^(-2).In addition,the Li|LiFePO_(4)(LFP) SSBs achieve favorable cycling performance:the specific capacity reaches128.1 mAh g^(-1) at 0.5 C rate,with a capacity retention of about 80% after 600 *** the further tests of the LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811) cathodes with higher energy density,the Nano LLZO CSEs also demonstrate good compatibility:the specific capacities of NCM811-based SSBs reach 177.9 mAh g^(-1) at 0.5 C rate,while the capacity retention is over 96% after 150 ***,the Li|LFP soft-pack SSBs verify the safety characteristics and the potential for application,which have a desirable prospect.

关键词： Solvent-free method Nano LLZO CSEs Interfacial modulation Cycling performance Safety characteristics

来源：评论

学校读者我要写书评

暂无评论

Elastic properties of Cu–6wt% Ag alloy wires for pulsed magnets investigated by ultrasonic techniques

引用

Chinese Physics B 2025年第2期34卷 90-95页

作者： Ziyu Li Tianyi Gu Wenqi Wei Yang Yuan Zhuo Wang Kangjian Luo Yupeng Pan Jianfeng Xie Shaozhe Zhang Tao Peng Lin Liu Qi Chen Xiaotao Han Yongkang Luo Liang Li Wuhan National High Magnetic Field Center Huazhong University of Science and TechnologyWuhan 430074China School of Physics Huazhong University of Science and TechnologyWuhan 430074China State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and TechnologyWuhan 430074China School of Materials Science and Engineering State Key Laboratory for Materials Processing and Die&Mold TechnologyHuazhong University of Science and TechnologyWuhan 430074China

Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we perform systematic studies on the elastic properties of the Cu–6wt% Ag alloy wire, which is a promising candidate material for the new-generation pulsed magnets, by employing two independent ultrasonic techniques, i.e., resonant ultrasound spectroscopy(RUS) and ultrasound pulse-echo experiments. Our RUS measurements manifest that the elastic properties of the Cu–6wt% Ag alloy wires can be improved by an electroplastic drawing procedure as compared with the conventional cold drawing. We also take this opportunity to test the availability of our newly-built ultrasound pulse-echo facility at the Wuhan National High Magnetic Field Center(WHMFC, China), and the results suggest that the elastic performance of the electroplastically-drawn Cu–6wt% Ag alloy wire remains excellent without anomalous softening under extreme conditions,e.g., in ultra-high magnetic field up to 50 T and nitrogen or helium cryogenic liquids.

关键词： high-field magnet Cu–Ag alloy ultrasonic techniques elastic constants

来源：评论

学校读者我要写书评

暂无评论

Transient Synchronous Stability Analysis and Assessment of PLL-Based VSC Systems by Bifurcation Theory

引用

IEEE Transactions on Energy Conversion 2024年第2期40卷 1312-1324页

作者： Han, Miao Ma, Rui Zhan, Meng Huazhong University of Science and Technology State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Wuhan430074 China Shandong University Key Laboratory of Power System Intelligent Dispatch and Control of Ministry of Education School of Electrical Engineering Jinan250061 China

For the transient synchronous stability of phase-locked loop based voltage source converter grid-tied systems, the generalized swing equation (GSE) is believed as very important. In this paper, the GSE is studied deeply by bifurcation theory. For instance, the co-dimension-2 Bogdanov-Takens (BT) bifurcation is rigorously analyzed, and the formulations for three co-dimension-1 bifurcations near the BT bifurcation point including the generalized saddle-node, Hopf, and homoclinic bifurcations are explicitly obtained. Moreover, all Hopf bifurcations in the GSE have been theoretically proven to be subcritical by the normal form method. Therefore, after the Hopf and homoclinic bifurcations, two different types of basin of attraction occur widely including a closed loop surrounded by an unstable limit cycle and a fish- like pattern surrounded by the stable manifold of unstable equilibrium point (UEP), respectively. In addition, for the transient synchronous stability assessment after the homoclinic bifurcation, based on the linear approximation of the stable manifold of the UEP, an index for the distance between the stable equilibrium point and the approximated stability boundary is formulated. All these theoretical results are well verified and supported by numerical calculations and real-time simulations, making all previous phenomenal observations of the GSE stand on the solid foundation of rigorous mathematics. © 1986-2012 IEEE.

关键词： Phase locked loops

来源：评论

学校读者我要写书评

暂无评论

Multi-Objective Optimization of electromagneticthermal Coupling Performance for High-torquedensity PMSM based on Multi-dimensional Correction Techniques

Multi-Objective Optimization of Electromagneticthermal Coupl...

引用

2024 International Conference on Electrical Machines, ICEM 2024

作者： Li, Zequan Wang, Jin Sun, Lu Kang, Haoyu Liu, Liyang Zhou, Libing State Key Laboratory of Advanced Electromagnetic Technology Huazhong University of Science and Technology Wuhan China School of Electrical and Electronic Engineering Huazhong University of Science and Technology State Key Laboratory of Advanced Electromagnetic Engineering and Technology Wuhan430074 China Guangzhou China Guangzhou511453 China

ISBN: (纸本)9798350370607

To address the precision limitation of traditional thermal models and the computational inefficiency of electromagnetic-thermal coupling finite element models, this work proposes a multidimensional correction-based electromagnetic-thermal coupling design optimization method for electric machines. Firstly, this method corrects the sensitive parameters in the analytical lumped parameters thermal network model (LPNM) based on prior information from historical experimental data to ensure the accuracy for thermal performance analysis. Subsequently, to enhance computational efficiency, a large number of low-fidelity (LF) samples are obtained using the corrected thermal model in a serial electromagnetic-thermal field calculation manner, complemented by a small number of high-fidelity (HF) samples obtained from the electromagnetic-thermal coupling simulation model. Then, by employing a transfer learning technique, the data information from the low- to high-fidelity sample sets is comprehensively utilized to train a multi-fidelity (MF) surrogate model for the final optimization. The proposed method applied to a high-torque-density aerospace propulsion permanent magnet synchronous motor (PMSM) with short-term strong overload capability, it not only significantly improves the accuracy of LPNM, but also reduces the training sample acquisition time by over 50% under the same model accuracy. Finally, a prototype is tested to validate the effectiveness of the proposed method. © 2024 IEEE.

关键词： Lumped parameter networks

来源：评论

学校读者我要写书评

暂无评论

First spectroscopic study of HFRC plasma

引用

Plasma Science and technology 2024年第8期26卷 18-24页

作者：毛安程芝峰饶波杨菁珉张明 International Joint Research Laboratory of Magnetic Confinement Fusion and Plasma Physics State Key Laboratory of Advanced Electromagnetic TechnologyWuhan 430074People’s Republic of China School of Electrical and Electronic Engineering Huazhong University of Science and TechnologyWuhan 430074People’s Republic of China

An advanced spectral diagnostic system was developed to measure the electron temperature(T_(e)),electron density(N_(e)),and ion temperature(T_(i))of the Huazhong University of Science and technology field-reversed configuration *** system consists of an optic fiber spectrometer with a wide spectral band and a 670 mm focal length high throughout Czerny-Turner monochromator equipped with both a 3600 g mm^(-1)grating and a 2400 g mm^(-1)grating to measure the line *** these components is an electronmultiplying charge-coupled device camera to capture spectral *** relative intensity of the optical fiber spectrometer was calibrated using a standard luminance source,and the wavelength calibration of the spectrometer was accomplished using a Hg/Ar *** diagnostic setup was configured to measure electron density based on the Stark effect of H_γ(n=5→n=2;434.04 nm).Doppler broadening of an OⅢ(2s^(2)2p(^(2)P^(0))3p→2s^(2)2p(^(2)P^(0))3s;375.988 nm)emission line was measured and analyzed to obtain the ion temperature,and electron temperatures were estimated from the relative strength of H_(β)(n=4→n=2;486.14 nm)(D_(β))and H_(γ)(D_(γ))spectral lines when the electron density was obtained from Stark effect *** initial experimental results indicate that the highest electron temperature of the formation region was approximately 8 eV,the electron density of the colliding-and-merging region was approaching 10^(20)m^(-3),and the ion temperature reached about 40 eV.

关键词： Stark effect Doppler effect ion temperature electron density electron temperature

来源：评论

学校读者我要写书评

暂无评论

A DSVM-based MPC Strategy with Magnetizing Inductance Online Identification Method for Thrust Ripple Suppression in Linear Induction Machine

引用

IEEE Transactions on Power Electronics 2025年第8期40卷 10746-10757页

作者： Guo, Yingcong Xu, Wei Ge, Jian Xiao, Han Tang, Yirong Shangguan, Yongdao Southwest Jiaotong University School of Electrical Engineering Chengdu610031 China Beijing100190 China Huazhong University of Science and Technology State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic Engineering Wuhan430074 China

The conventional discrete space vector modulation-based model predictive control (DSVM-MPC) strategies in linear induction machines (LIMs) have two problems, one is that the current harmonics and thrust ripple are large as accuracy of the voltage vector (VV) is insufficient under the limited computational burden, and the other is that the parameter robustness is poor. To solve these problems, an improved DSVM-MPC strategy with magnetizing inductance online identification method for LIMs is proposed. Firstly, an improved virtual VV discretization method and an optimal VV searching method are proposed, which can obtain more accurate VV with less computational burden compare to conventional DSVM-MPC strategies. Then, to improve the parameter robustness, a magnetizing inductance online identification method based on back electromotive force (EMF) is proposed, and a sliding mode observer (SMO) is designed to observe back EMF, which effectively avoids the current differential term. Furthermore, an adaptive compensation algorithm for cascaded low-pass filters is conceived to effectively suppress the inherent chattering of the SMO, and the amplitude and phase of the fundamental wave are appropriately compensated. Finally, the superiority of the proposed method is verified through comprehensive simulations and experiments on a 3kW LIM prototype. © 1986-2012 IEEE.

关键词： Low pass filters

来源：评论

学校读者我要写书评

暂无评论

Numerical study of current density on armature and rail interface with dynamic contact 10

Numerical study of current density on armature and rail inte...

引用

10th Euro-Asian Pulsed Power Conference, 25th International Conference on High-Power Particle Beams and 20th International Symposium on electromagnetic Launch technology, EAPPC-BEAMS-EML 2024

作者： Xu, Jinghan Xia, Shengguo Chen, Lixue Huazhong University of Science and Technology Key Laboratory of Pulsed Power Technology State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Wuhan China

ISBN: (纸本)9789038661353

The electrical contact between the armature and rail is acknowledged as an imperfect electrical contact (ImPEC), exhibiting properties distinct from the bulk. It is necessary to understand the current distribution for future structure design and optimization. This paper proposes ImPEC boundary conditions by combining the contact layer model (CLM) and the Cooper-Mikic-Yoranovich model (CMYM), and the current distribution is numerically studied. The contact pressure and area vary with the input current, sharing similar trends, which show a rapid increase in the contact pressure and area during the current ramp-up stage, being constant in the flat stage, and a gradual decline in the current ramp-down stage. The current is re-distributed with the contact area, which is concluded as forced shifts of current caused by dynamic contact. © 2024 Eindhoven University of technology.

关键词： Digital elevation model

来源：评论

学校读者我要写书评

暂无评论

Variable dead zone pulse width modulation to reduce conducted electromagnetic interference 2

Variable dead zone pulse width modulation to reduce conducte...

引用

2nd China Power Supply Society electromagnetic Compatibility Conference, CPEMC 2024

作者： Liu, Hui Jiang, Dong Yan, She State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan China

ISBN: (纸本)9798331509552

—The switching of the switch will produce a lot of electromagnetic interference (EMI). The time scale of the dead zone is very small, and the actual conduction situation is determined by the direction of the current, and therefore affects the EMI at the MHz level. Based on the principle of spread spectrum modulation, a pulse width modulation (PWM) technique with variable dead zone (VDZ) is proposed in this paper. The simulation and experimental results show that the differential mode EMI can be reduced by about 5dB at 600kHz-5MHz by using VDZPWM at a constant switching frequency. ©2024 IEEE.

关键词： Pulse width modulation

来源：评论

学校读者我要写书评

暂无评论

Shape-position perceptive fusion electronic skin with autonomous learning for gesture interaction

引用

Microsystems & Nanoengineering 2024年第4期10卷 225-238页

作者： Qian Wang Mingming Li Pingping Guo Liang Gao Ling Weng Wenmei Huang State Key Laboratory of Reliability and Intelligence of Electrical Equipment TianjinChina Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province School of Electrical EngineeringHebei University of TechnologyTianjin 300130China

Wearable devices,such as data gloves and electronic skins,can perceive human instructions,behaviors and even emotions by tracking a hand's motion,with the help of knowledge *** shape or position single-mode sensor in such devices often lacks comprehensive information to perceive interactive ***,the limited computing power of wearable applications restricts the multimode fusion of different sensing data and the deployment of deep learning *** propose a perceptive fusion electronic skin(PFES)with a bioinspired hierarchical structure that utilizes the magnetization state of a magnetostrictive alloy film to be sensitive to external strain or magnetic *** at the joints of a hand,the PFES realizes perception of curvature(joint shape)and magnetism(joint position)information by mapping corresponding signals to the two-directional continuous distribution such that the two edges represent the contributions of curvature radius and magnetic field,*** autonomously selecting knowledge closer to the user's hand movement characteristics,the reinforced knowledge distillation method is developed to learn and compress a teacher model for rapid deployment on wearable *** PFES integrating the autonomous learning algorithm can fuse curvature-magnetism dual information,ultimately achieving human machine interaction with gesture recognition and haptic feedback for cross-space perception and manipulation.

关键词： alloy electronic interaction

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：