检索结果-内蒙古大学图书馆

An accurate pose measurement method of workpiece based on rapid extraction of local feature points

Optoelectronics Letters 2022年第6期18卷 372-377页

作者： ZHANG Jiangtao QIAO Zhifeng WANG Shihao Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical EngineeringTianjin University of TechnologyTianjin 300384China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of TechnologyTianjin 300384China

Ceramic sanitary products with complex curved surfaces are generally fragile and difficult to *** the industrial robot is utilized to realize the automatic grinding of such products,the precise positioning of the product is required *** this paper,an accurate pose measurement system for complex curved surface parts is designed by point cloud registration *** order to improve the stability of the system,this paper combines the advantages of normal vector features and fast point feature histogram(FPFH)features,and proposes a point cloud registration algorithm based on the rapid extraction of local feature *** results verify that the improved algorithm has improved both efficiency and accuracy,and the system can effectively achieve accurate positioning of products.

关键词： robot system curved

来源：评论

学校读者我要写书评

暂无评论

A calibration method of external parameters of 2D laser in rotary 3D scanning

引用

Optoelectronics Letters 2022年第12期18卷 730-736页

作者： WANG Shihao QIAO Zhifeng HUANG Jiahao Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical EngineeringTianjin University of TechnologyTianjin300384China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of TechnologyTianjin300384China

Aiming at the problem of external parameter calibration in the combined rotating three-dimensional(3D) scanning process of laser radar and turntable, a fast 3D data scanning and accurate equipment calibration method suitable for industrial application scenarios is proposed. The coordinates of the center of the circle in the laser radar coordinate system are obtained by fitting the coordinates of the center of the circle with the scanning arc. Through the standard size and rotation angle of the target ball, the coordinates of the ball center in the turntable coordinate system are obtained. The rotation parameter R and the translation parameter T of the minimum value of the data set conversion error function in the two coordinate systems are calculated. The experimental results show that the error between the converted data and the actual data is within 0.1 mm, which meets the actual work requirements. This calibration method has the advantages of high accuracy and strong robustness.

关键词： coordinate rotation parameter

来源：评论

学校读者我要写书评

暂无评论

Application and Practice of Smart Education Technology in Blended Teaching of Engineering Drawing Course 24

Application and Practice of Smart Education Technology in Bl...

引用

9th International Conference on Distance Education and Learning, ICDEL 2024

作者： Xu, Jinyou Tian, He Wang, Xiaofei Xue, Yahong Li, Ling Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin University of Technology China School of Environmental Science and Safety Engineering Tianjin University of Technology Tianjin China

ISBN: (纸本)9798400716805

The expeditious progress of information technology has encouraged the digital enhancement of the educational sector. To remedy the issues of the traditional teaching mode, a blended teaching mode of engineering drawing course has been developed with the use of smart education technology. Based on the Outcomes-based Education ( OBE ), the teaching objectives and teaching contents of the course are reconstructed by using the method of reverse design and forward implementation. By leveraging the synergy of online and offline, virtual and real, and quantitative and qualitative evaluation, a blended teaching approach that is both student-centered and teacher-guided is realized. A course knowledge graph has been built, offering fresh concepts for accomplishing personalized learning for students. The teaching practice shows that the blended teaching mode based on intelligent education has created a multi-dimensional autonomous learning space and personalized learning path for students, which effectively improves the enthusiasm and initiative of students to participate in teaching activities, and also improves the information level of teaching process and management, and promotes the organic integration of teaching and learning. © 2024 ACM.

关键词： Contrastive Learning

来源：评论

学校读者我要写书评

暂无评论

Study on Rotating Speed control of Dissimilar Metal Friction Stir Welding based on Fuzzy PID 6

Study on Rotating Speed Control of Dissimilar Metal Friction...

引用

2021 6th International Conference on Applied Mechanics and Structural Materials, AMSM 2021

作者： Liu, Yongning Qiao, Zhifeng Liu, Qingjian Huang, Jiahao Fu, Kang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China China

The demand for lightweight vehicles that achieve energy conservation and emission reduction continues to grow. Aluminum alloys were commonly applied to the automotive industry to reduce the structural quality of the entire vehicle. However, the cost of aluminum alloy was higher than that of steel, so the industry considered the use of aluminum in combination with low-cost materials such as steel. Traditional welding technology was limited by the great physical difference between aluminum alloy and steel. Friction Stir Welding, a solid phase welding technology, can overcome the connection problem of aluminum and its alloys with steel, but the process parameters of FSW directly affect the welding quality. This paper established the FSW process of two different metals of DC05 and AL6061. Aimed to get a good welding joint, the error of tool speed is reduced by fuzzy PID system established in this paper, and the tool speed is controlled stably. Simulink simulation was established, and compared with the simulation results, fuzzy PID control can control the precision and stability of the tool speed of FSW, improve the welding quality, and provide a certain theoretical basis for the tool speed control. © 2022 Institute of Physics Publishing. All rights reserved.

关键词： Friction stir welding

来源：评论

学校读者我要写书评

暂无评论

Research on the optimization of blanking process for the circuit breaker positioning plate

引用

Engineering Letters 2021年第4期29卷 1585-1594页

作者： Zheng, Qingchun Liu, Jiaqi Liu, Jingna Zhu, Peihao Ma, Wenpeng Gao, Zhongyu Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China

This paper, through the theory of multi-objective parameter optimization, the finite-element analysis and central composite test of the blanking process of the locating plate of the breaker are carried out. The optimal blanking process parameters of the positioning plate of the circuit breaker are determined, and the influence laws of the independent variable blanking gap, the punch edge radius and the blanking speed on the maximum blanking force and the length of the bright belt are obtained. The experimental results show that the production efficiency of the positioning plate of the circuit breaker is increased by 25%, and the actual machining error is only 4%, which provides a certain guiding significance for optimizing the blanking process parameters. © 2021, International Association of Engineers. All rights reserved.

关键词： Multiobjective optimization

来源：评论

学校读者我要写书评

暂无评论

Real Time Surgical Instrument Object Detection Using YOLOv7 1

引用

6th EAI International Conference on Robotics and Networks, EAI ROSENET 2022

作者： Zheng, Laiwang Liu, Zhenzhong Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China

ISBN: (数字)9783031338267

ISBN: (纸本)9783031338250

With the rapid development of minimally invasive surgery (MIS) in the medical field, surgical robot technology has developed rapidly. Human-machine combined assisted surgical technology has begun to bring good news to the majority of doctors and patients who need surgery. It has gradually become a common medical treatment. Minimally invasive surgery can overcome the shortcomings of traditional surgery. MIS has the advantages of less trauma, less impact on patients, faster recovery, less intraoperative blood loss, and so on. For surgical robots, surgical instruments are important execution components that have been widely concerned and studied in recent years. One of the core technologies of surgical robots is the detection of surgical equipment based on deep learning, which can effectively assist doctors to complete the surgery. Current surgical instrument detection methods need to be improved in real-time performance and accuracy. Therefore, this paper proposes a new real-time detection algorithm, which is based on the deep learning object detection system YOLOv7. The real dataset, which contained information on seven surgical instruments, was selected for training and validation. Experiments show that the method has good precision, recall rate, and mAP, which can be used to improve the ability of robot-assisted doctors to identify instruments during surgery. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.

关键词： Object recognition

来源：评论

学校读者我要写书评

暂无评论

Construction and Application of the Teaching Cloud Platform for Engineering Drawing Course 12

Construction and Application of the Teaching Cloud Platform ...

引用

12th IEEE International Conference on Educational and Information Technology, ICEIT 2023

作者： Xue, Yahong Mu, Haozhi Xue, Lijun Tianjin University of Technology Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin300384 China

ISBN: (纸本)9781665475518

A cloud platform for engineering drawing course teaching was proposed based on cloud station. The cloud station can solve the common problems existed in engineering drawing course, such as the difficulty of teaching, the heavy work of tutorship, the poor teaching effect, the weak spatial imagination of students, as well as the current difficulty to develop the virtual model resource base and the interaction is not strong. The platform uses Solidworks software to build 3D model library, and combines with CADbro's powerful cloud service and 3D file viewing function to realize the interaction and sharing with cloud model by using web browser. At the same time, we choose bilibili, a popular cultural site for teenagers, to release the explanation videos of exercises, and make use of the convenient way to build the cloud station to integrate, release and manage the resources. The platform realizes self-study and self-test at anytime and anywhere on both PC and mobile devices, and fast jumps the corresponding explanation video and cloud virtual model according to the demand. The virtual model in the cloud can be rotated, cut, distance measured, exploded, parts hidden, moved, 2D viewed and so on by touch. The platform is innovative, extensible, interesting and practical, which can greatly enhance the students' enthusiasm for independent learning, and it can be used reference to the development of engineering drawing teaching resources. © 2023 IEEE.

关键词： 3D modeling

来源：评论

学校读者我要写书评

暂无评论

Modeling, Simulation, and Parameter design of Actuation Mechanisms Based on New Magnetic control Materials 25

Modeling, Simulation, and Parameter Design of Actuation Mech...

引用

25th IEEE China Conference on system Simulation Technology and its Application, CCSSTA 2024

作者： Shen, Ruixuan Tian, He Zhao, Guanqiao Zhu, Ziliang Li, Jiangping Liang, Chao Tianjin University of Technology National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin China Tianjin Sanyuan Power Equipment Manufacturing Co. Ltd Tianjin China

ISBN: (纸本)9798350366600

With the rapid advancement of technology, the reliability and efficiency of power systems have become increasingly critical. In power systems, pole-mounted circuit breakers play a vital role. This paper presents a design scheme for an actuation mechanism of a pole-mounted circuit breaker based on new magnetic control materials. By analyzing the working principle of this actuation mechanism, a mathematical model was constructed, and a corresponding virtual prototype model was established using multi-body dynamics simulation software ADAMS and the dynamics mathematical model of this type of actuation mechanism. key performance parameters of the circuit breaker were optimized using a quantum genetic algorithm. Simulation experiments verified that the proposed parameter settings achieved a closing time of 7.6 ms, demonstrating significant improvements in circuit breaker performance. The results of this study are of great importance for the optimization design and performance enhancement of circuit breakers in power systems. © 2024 IEEE.

关键词： Software prototyping

来源：评论

学校读者我要写书评

暂无评论

An Approach for Predicting and Compensating the End Deformation of a Heavy Load Robot for Friction Stir Welding 16th

An Approach for Predicting and Compensating the End Deformat...

引用

16th International Federation of Theory of Machines and Mechanisms World Congress, IFToMM WC 2023

作者： Bai, Yujie Liu, Haitao Meng, Shaofei Ma, Yue Yue, Wei Li, Guangxi Xiao, Juliang Wang, Guofeng Ding, Yabin Key Laboratory of Mechanism Theory and Equipment Design of State Ministry of Education Tianjin University Tianjin300072 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China Dongguan University of Technology Dongguan523808 China

ISBN: (纸本)9783031457043

Aiming at solving the problem of insufficient plunge depth by the deformation of friction stir welding robots, this paper presents a method for predicting and compensating for the end deformation of friction stir welding robots. Firstly, the numerical model of FSW is established using DEFORM-3D software, then the axial force on the welding tool is obtained. Subsequently, the robot stiffness model is established based on the screw theory to realize the prediction of robot deformation in the workspace. Finally, a deformation compensation method based on the mirror principle is proposed to realize the compensation of the welding trajectory. Taking the 10 mm AA6061 aluminium alloy FSW as an example, the compensation method proposed in this paper is verified by using computer simulation. The results show that the stiffness model established in this paper can accurately predict the end deformation of the robot. The maximum plunge depth deviation of the compensation method proposed in this paper is reduced by 95.17% compared with the uncompensated case, which proves the effectiveness of the proposed compensation method. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2023.

关键词： Friction stir welding

来源：评论

学校读者我要写书评

暂无评论

Condition Monitoring of Railway Vehicle Suspension system Based on PCA-SVM Method

Condition Monitoring of Railway Vehicle Suspension System Ba...

引用

TEPEN International Workshop on Fault Diagnostics and Prognostics, TEPEN-IWFDP 2024

作者： Liu, Fulong Guo, Honglin Zhang, Xiaotao Chen, Wei Gu, Fengshou Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China Tianjin300384 China Centre for Efficiency and Performance Engineering University of Huddersfield HuddersfieldHD1 3DH United Kingdom

ISBN: (纸本)9783031702341

The suspension system is critical to ensure the running safety and comfortability of railway vehicle. This paper employed conventional machine learning method of principal component analysis and support vector machine (PCA-SVM) to diagnose the damper fault, wheel surface fault, roller fault, damper fault coupled with wheel surface fault and damper fault coupled with wheel and roller surface faults. The effectiveness of this method was verified by data obtained from a 1/5th scaled roller rig. The results shown that the performance of PCA-SVM was acceptable for railway vehicle suspension system monitoring. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.

关键词： Rollers (machine components)

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：