检索结果-内蒙古大学图书馆

IEEE International Conference on Mechatronics and Automation

作者： Shiqin Yu Jian Guo Shuxiang Guo Qiang Fu Tianjin Key Laboratory for Control Theory & Applications in Complicated Systems and Intelligent Robot Laboratory Tianjin University of Technology Binshui Xidao Extension 391 Tianjin China Shenzhen Institute of Advanced Biomedical Robot Co. Ltd. No.12 Ganli Sixth Road Jihua Street Longgang District Shenzhen China Key Laboratory of Convergence Medical Engineering System and Healthcare Technology The Ministry of Industry and Information Technology School of Life Science Beijing Institute of Technology No.5 Zhongguancun South Street Beijing China

With the number of stroke patients increasing year by year, rehabilitation exoskeleton robot has been paid more and more attention. For the rehabilitation exoskeleton robot, human-computer interaction ability is an important index, which affects the effect of rehabilitation therapy to a great extent. Surface Electromyography (sEMG) signals are the combined effect of sEMG signals and electrical activities on nerve stem on the skin surface, which can reflect neuromuscular activities in advance and can be used to predict movement intention by sEMG signals. Therefore, this article proposes to use sEMG signals to monitor the motion information of the healthy leg in real-time, extract the characteristics of the electromyography signals, use the sEMG of the healthy leg as the control signal, reflect the motion patterns reflected by the sEMG collected from the healthy side, and then use the motion intention recognition method of Long Short Term Memory(LSTM) neural network to identify the motion intention of the prosthetic limb by identifying the motion patterns of the swing phase of the healthy side. The results indicate that the predicted maximum Root Mean Squared Error(RMSE) is 5.3729, which proves the feasibility of using LSTM model for motion intention recognition and contributes to the real-time and accuracy of lower limb exoskeleton rehabilitation.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Prediction model of bone drilling temperature based on heat source method in surgical rehabilitation

引用

Procedia CIRP 2020年 89卷 263-269页

作者： Yahui Hu Zhiqiang Yan Xiangjun Li Chunqiu Zhang Qingchun Zheng Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System Tianjing University of Technology Tianjin China School of Mechanical Engineering Tianjin University of Technology Tianjin China

In order to feedback the cutting temperature in real time during the operation with the surgical robot, this study established a temperature prediction model to analyze the temperature distribution of the cortex. In this work, a three-dimensional governing equation for heat transfer of bone tissue during drilling is proposed, and the heat transfer of cortical bone is evaluated by a reverse heat transfer method. The prediction model was validated by experimental methods and the heat affected zone (HAZ) of cortical bone was analyzed. The results show that the prediction results are in good agreement with the relevant experimental results. HAZ increases with increasing rate of penetration; the closer the bone hole is, the earlier the temperature rises; and the temperature at which the cortical bone is difficult to measure (radial distance x < 0.5 mm) is predicted. The predictive model can accurately predict the temperature distribution of the cortical bone and prevent the occurrence of thermal damage. Provide technical support for the development of medical rehabilitation robots. And reduce the patient’s secondary injury, which is conducive to rapid recovery after surgery.

关键词： Cortical bone drilling Temperature estimation Inverse heat transfer problem Thermal damage rehabilitative

来源：评论

学校读者我要写书评

暂无评论

RETRACTED ARTICLE:Thermal,mechanical,and tribological properties of sodium-montmorillonite-nanoparticle-reinforced polyethersulfone and polytetrafluoroethylene ternary composites

引用

Friction 2022年第7期10卷 1134-1134页

作者： Shicheng YAN Yahong XUE Yahui HU Shoujun WANG Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical EngineeringTianjin University of TechnologyTianjin 300384China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of TechnologyTianjin 300384China College of Mechanical Engineering Tianjin University of TechnologyTianjin 300384China

The Editor-in-Chief has retracted this article[1]because a large number of figures as well significant parts of the text overlap with the 2017 *** by Zhen Zuo[2].All authors agree to this retraction.[1]Yan S C,Xue Y H,Hu Y H,Wang S ***,mechanical,and tribological properties of sodium-montmorillonite-nanoparticlereinforced polyethersulfone and polytetrafluoroethylene ternary ***(2020).https://***/10.1007/s40544-019-0343-x.[2]Zuo *** on tribological property and friction interface interaction of PES/PTFE ***.D ***(China):Yanshan University,2017.

关键词： friction Friction tribological

来源：评论

学校读者我要写书评

暂无评论

Weld image dust removal algorithm based on fusion of bright channel and weighted guide dark channel

UPB Scientific Bulletin, Series C: Electrical Engineering an...

引用

UPB Scientific Bulletin, Series C: Electrical Engineering and Computer Science 2020年第4期82卷 69-80页

作者： Zheng, Qingchun Lu, Kaijie Ma, Wenpeng Zhang, Zhidong Zhu, Peihao Liu, Jingna Hu, Yahui Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China Tianjin300384 China

The dust removal technology of weld image is helpful to promote the development of weld target detection and tracking control. Aiming at the problem that the image restoration algorithm has halo phenomenon in depth discontinuity and easy to cause color distortion, this paper proposes a single image restoration algorithm based on fusion of bright channel and weighted guided dark channel for dedusting of weld image. Firstly, the bright channel hypothesis is derived according to dark channel priori (DCP), and the bright channel obtained by the adaptive method will fuse with the dark channel image to construct the fusion channel. Then, the weighted guided filter is used to optimize the rough transmittance. Finally, the restored image of the weld is recovered according to the atmospheric scattering model and the restored atmospheric light. Simulation experiments and image quality analysis show that the proposed algorithm can recover the details of the weld image and suppress the halo phenomenon. The image segmentation networks are used to further verify that our algorithm can improve the accuracy and integrity of weld segmentation. © 2020, Politechnica University of Bucharest. All rights reserved.

关键词： Image segmentation

来源：评论

学校读者我要写书评

暂无评论

design of a Capsule Robot system for Gastric Hemorrhage Detection using Luminol

Design of a Capsule Robot System for Gastric Hemorrhage Dete...

引用

IEEE International Conference on Mechatronics and Automation

作者： Yuchen Mao Jian Guo Shuxiang Guo Qiang Fu Tianjin Key Laboratory for Control Theory & Application Complicated Systems and Intelligent Robot Laboratory School of Electrical Engineering and Automation Tianjin University of Technology Binshui Xidao Extension 391 Tianjin China Shenzhen Institute of Advanced Biomedical Robot Co. Ltd No.12 Ganli Sixth Road Jihua Street Longgang District Shenzhen China Key Laboratory of Convergence Medical Engineering System and Healthcare Technology The Ministry of Industry and Information Technology School of Life Science Beijing Institute of Technology No.5 Zhongguancun South Street Beijing China

Gastric hemorrhage in upper gastrointestinal bleeding is an obvious indicator of deteriorating gastric disease. This paper proposes a capsule robot system for detecting bleeding in the stomach. The patient ingests a capsule robot containing luminol reagent, which detects bleeding in the stomach via chemiluminescence. The MCU receives the optical sensor signal, and the data is transmitted via radio frequency. The external lower computer receives and forwards the data to the upper computer for processing and display. The data is used to determine the presence and amount of stomach bleeding. Chemiluminescence is an excellent sensor, requiring no external energy supply, and demonstrating excellent sensitivity and selectivity. Combining chemical and electronic sensors presents opportunities for further development. Capsule robot detection reduces the discomfort and risk of secondary injury associated with traditional endoscopy. This paper establishes an experimental platform using porcine blood to simulate human blood, demonstrating the feasibility of the system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Non-reciprocity of energy transfer derived from cubic stiffness-induced nonlinear phenomena

引用

Results in Physics 2025年 73卷

作者： Kong, Na Sun, Min Chen, Jianen Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin 300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin 300384 China School of Science Tianjin Chengjian University Tianjin 300384 China

Introducing purely nonlinear elastic elements can induce rich dynamic behaviors, such as bifurcations, jumps and isolated resonance curves, to linear systems. Therefore, these elements are suitable for constructing strong non-reciprocity of vibration energy transfer. First, the energy transfer along reciprocal directions in a three-degree-of-freedom system is investigated, where three oscillators are connected by cubic springs. The semi-analytical solutions of the system are obtained using the complexification-averaging method and the least squares method. The results are compared against numerical solutions obtained by the Runge-Kutta method. The excitation amplitude range that produces strong non-reciprocity of vibration energy is analyzed. The jump phenomenon under combined excitation is investigated, and a trigger method for constructing non-reciprocity using an impulse is proposed. Then, an oscillator chain with cubic stiffness and scaling parameters is embedded into a multi-degree-of-freedom linear oscillator system to further explore the effect of cubic stiffness. Energy transfer along two directions is compared by exciting the leftmost oscillator and the rightmost oscillator. Moreover, the trigger effect of the impulse on non-reciprocity is demonstrated. The results show significant differences in vibration energy transfer within three distinct frequency bands. The critical points between reciprocal and non-reciprocal states are obtained, and the three stages of reciprocity related to excitation amplitude are analyzed. Lastly, the modulation effect of the cubic stiffness on non-reciprocity is conducted by comparing the energy of the output oscillator. © 2025 The Authors

关键词： Cubic stiffness Energy transfer Jump phenomenon Non-reciprocity

来源：评论

学校读者我要写书评

暂无评论

NURBS Interpolator With Pre-compensation Based on Discrete Inverse Transfer Function for CNC High-precision Machining

Research Square

引用

Research Square 2021年

作者： Wang, Taiyong Cao, Libo Zhang, Yongbin Dong, Jingchuan Jia, Songhui Tian, Chong Liu, Qingjian Renai College Tianjin University Tianjin301636 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China School of Mechanical Engineering Tianjin University No.135 YaGuan Road Jinnan District Tianjin300354 China

In the field of CNC machining, high-speed and high-precision machining has been regarded as the key research by many scholars. In conventional methods, high-speed machining and high-precision machining are contradictory. It is inevitable to reduce the feedrate to improve the processing accuracy. In the paper, a pre-compensation based on discrete inverse transfer function (PDIT) theory is proposed. PDIT is able to improve machining accuracy by reducing contour errors without decreasing feedrate. The proposed PDIT theory is divided into three parts, NURBS interpolator, feedrate scheduling, and interpolator with pre-compensation. The NURBS interpolator has greatly advantage to interpolate the parameter curve directly. Therefore, the paper adopts the NURBS interpolator to accomplish interpolation. In the feedrate scheduling, S-type flexible acceleration and deceleration are used for path planning, and the maximum starting feedrate is obtained with the feedrate constraint. In the interpolator with pre-compensation, the NURBS interpolator is pre-compensated by PDIT. For inputs, the response of transfer function reach steady-state response with a little time. Before reaching steady-state response, the unsteady response exists in the transfer function. The unsteady response usually sustains tens of interpolation periods and must be lead contour error in machining. Hence, the PDIT theory is employed to compensate the contour error causing by the unsteady response of transfer function to NURBS interpolator. The drive system is a transfer function, so the unsteady response of drive system cause machining errors before reaching the steady-state response. In the paper, the NURBS interpolator is pre-compensated by PDIT theory before the drive system to reduce contour errors and improve machining accuracy. Finally, the performance of the proposed PDIT is evaluated by simulation experiments. The experimental results illustrate that PDIT theory obviously improve the machining accura

关键词： Transfer functions

来源：评论

学校读者我要写书评

暂无评论

design of deep-water omnidirectional spirit level

引用

Journal of Measurement Science and Instrumentation 2021年第4期12卷 472-478页

作者： ZHAO Lianyu LI Shuo ZHAO Xiaolei LI Maolin CHEN Jinyu WANG Chenglin Tianjin Key Laboratory of Advanced Mechatronic System Design and Intelligent Control National Demonstration Center of Experimental Mechanical and Electrical Engineering EducationSchool of Mechanical EngineeringTianjin University of TechnologyTianjin 300384China Offshore Oil Engineering Co. Ltd.Tianjin 300461China

Attitude adjustment is a key link in the installation process of underwater facilities in deep *** solve this problem,an omnidirectional spirit level for deep water was *** sealing principle of the spirit level and the principle of deep-water pressure resistance are analyzed,and the threaded connection strength is *** mechanical simulation verifies that the spirit level can withstand the pressure of 2000 m water depth,and the water pressure test is carried out for 30 min in a 20 MPa hyperbaric *** the experiment is completed,the appearance of the spirit level is intact and there is no *** experiment results show that the deep-water omnidirectional spirit level can be used in the deep sea within 2000 m.

关键词： deep water omnidirectional spirit level attitude adjustment pressure test underwater pressure

来源：评论

学校读者我要写书评

暂无评论

Distribution of Dislocation-Twin Interaction in Twip Steel Under Different Loading Modes

SSRN

引用

SSRN 2022年

作者： Guo, Xiangru Mao, Ningdong Sun, Chaoyang Wang, Chunhui Cui, Yinan Xiong, Zhiping Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China School of Mechanical Engineering University of Science and Technology Beijing Beijing100083 China Applied Mechanics Lab School of Aerospace Engineering Tsinghua University Beijing100084 China National Key Laboratory of Science and Technology on Materials under Shock and Impact Beijing Institute of Technology Beijing100081 China

The tension-compression asymmetry and orientation effect of dislocation-twin boundary (TB) interactions in twinned TWIP steels were investigated using the discrete dislocation dynamics simulations and Schmid's law. The different types of dislocations dominate the TB migration in the twinned TWIP steel during tension and compression with the same loading orientation, and the asymmetric dislocation reactions at TB were attributed to the different leading partials produced after the dissociation of dislocation under different loading modes (tension or compression). Moreover, the complex dislocation-TB interactions, such as dislocations traversing TB, cross slip, dissociation, pile up and so on, were determined by considering the orientation effect of dislocation activation and the asymmetry of dislocation dissociation. The research advances the understanding of asymmetric behavior of twin and its influence on the macro hardening in plastic deformation of TWIP steels. © 2022, The Authors. All rights reserved.

关键词： Dissociation

来源：评论

学校读者我要写书评

暂无评论

Global Dynamics and Optimal design of a New Highly Efficient Nonlinear Energy Sink Based on Magnetic-Elastic Impacts with Negative Stiffness

Research Square

引用

Research Square 2021年

作者： Li, Shuangbao Wang, Tingting Chen, Jianen Research Institute of Science and Technology Innovation Civil Aviation University of China Tianjin300300 China College of Science Civil Aviation University of China Tianjin300300 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China

A new highly efficient elastic-impact bistable nonlinear energy sink (EI-BNES) based on magnetic-elastic impacts with negative stiffness and bistability is proposed and optimized through global dynamical analysis. The EI-BNES has better robustness and higher energy dissipation rates with nearly more than 96.5% for broadband impulsive excitations than the traditional cubic NESs and single bistable NESs. The structure of negative stiffness impacts is realized by reasonable layout of permanent ring magnets and springs. A two-degree-of-freedom (two-DOF) elastic-impact system is established to describe the coupled nonlinear interaction between the main structure and the attached EI-BNES. A global Melnikov reduction analysis (GMRA) is proposed to study global dynamics and homoclinic bifurcations of the reduced two-dimensional subsystem, which is used to explain the mechanism of nonlinear targeted energy transfer (TET) and detect the threshold of impulsive amplitudes of EI-BNES for in-well and compound motions between in-well and cross-well resonance responses. A special type of saddle-center equilibrium points is also found in the non-smooth system of the EI-BNES and can be used to effectively increase the energy dissipation rates. The optimal design criterion of the tuned EI-BNES for better dissipation performance is also first discussed based on the GMRA and numerical techniques for calculating the Melnikov function of the non-smooth systems. The effectiveness of the analytical GMRA is also verified by numerical simulations. © 2021, CC BY.

关键词： Stiffness

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：