检索结果-内蒙古大学图书馆

15th IEEE International Conference on Mechatronics and Automation, ICMA 2018

作者： Ma, Huidong Guo, Jinjin Ge, Weimin Wang, Xiaofeng School of Mechanical Engineering Tianjin University of Technology China Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System Binshui Xidao 391 Xiqing District Tianjin300384 China

ISBN: (纸本)9781538660720

This paper aims at solving the problems that the manipulator will be constrained by the flexible load, and the caused constraint force is difficult to control. Based on the deflection screw theory, the dynamic model of the manipulator system is established by using the Lagrange equation. Firstly, according to the interaction of the end effector, the flexible load and the environmental constraints of the manipulator, the equation of motion of the entire system is built. Secondly, the dynamic model of the manipulator system is set up, that the system including the flexible load and the manipulator. Finally, Under the certain known environmental constraints, the dynamic modeling of a manipulator is performed. The effectiveness of the proposed method is verified by the simulation of a flexible beam operated by a 3-DOF manipulator. © 2018 IEEE.

关键词： Screws

来源：评论

学校读者我要写书评

暂无评论

Detection of weld defects based on incremental two-dimensional principal component analysis 15

Detection of weld defects based on incremental two-dimension...

引用

15th IEEE International Conference on Mechatronics and Automation, ICMA 2018

作者： Shen, Yaohua Ge, Weimin Wang, Xiaofeng School of Mechanical Engineering Tianjin University of Technology China Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechanical System Binshui Xidao 391 Xiqing District Tianjin300384 China

ISBN: (纸本)9781538660720

Aiming at the requirements of the real-time detection of weld defects in the industry, the candid covariance-free incremental PCA (CCIPCA) algorithm was introduced into the Two-Dimensional Principal Component Analysis (2PCA) algorithm, therefore an incremental 2DPCA algorithm (I2DPCA) is proposed. Firstly, the images captured by camera are preprocessed to improve the quality of the images because the captured images might be affected in the process of image acquisition. Then the I2DPCA algorithm is used to achieve feature extraction, and the dimension of the images is reduced. Finally, the recognition of weld defects is implemented using the k-nearest neighbor algorithm (KNN). Compared with the methods of traditional recognition by extracting the sizes of several geometric defects, the proposed algorithm has the advantage of the small memory spaces, the high recognition rate and the strong real-time recognition. The experimental results show that the proposed algorithm has higher recognition rate and is more practical than the 2DPCA, and the recognition rate reaches 94%, which can meet the requirements of the real-time detection. © 2018 IEEE.

关键词： Principal component analysis

来源：评论

学校读者我要写书评

暂无评论

Study on vibration and crack propagation control of cracked asymmetric rotor based on three-dimensional finite element model 15

Study on vibration and crack propagation control of cracked ...

引用

15th IEEE International Conference on Mechatronics and Automation, ICMA 2018

作者： Hu, Rong Liu, Jun Chen, Jianen Wang, Xiaofeng Ge, Weimin School of Mechanical Engineering Tianjin University of Technology China Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechanical System Binshui Xidao 391 Xiqing District Tianjin300384 China

ISBN: (纸本)9781538660720

In order to solve the vibration problems of a cracked asymmetric rotor, the three-dimensional finite element model of the rotor is established combined with a nonlinear contact approach. The free interface modal synthesis method is applied to shorten the computation time by reducing the order of the model. The vibration characteristics of the asymmetric rotor and the cracked asymmetric rotor in different crack locations are analyzed by the simulation. The results of numerical simulation show the appearance of crack will affect the resonance frequency and the range of unstable area on the major critical speed. At the same time, the active control of the rotor is realized by the electromagnetic actuator controlled by neural network PID. Secondly, based on the theory of rotor dynamics, the effects of rotational speed and unbalance on the breathing behavior of the cracked rotor are discussed. In this paper, it proposes a novel method delaying the crack extension effectively. In the process of operation, the electromagnetic actuator (EMA) can effectively control the vibration and can delay the crack propagation. © 2018 IEEE.

关键词： Computation theory

来源：评论

学校读者我要写书评

暂无评论

Structure design and analysis of reconfigurable fixture robot based on the auto-body panels 15

Structure design and analysis of reconfigurable fixture robo...

引用

15th IEEE International Conference on Mechatronics and Automation, ICMA 2018

作者： Li, Jilong Liu, Jun Wang, Xiaofeng Ge, Weimin School of Mechanical Engineering Tianjin University of Technology China Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System Binshui Xidao 391 Xiqing District Tianjin300384 China

ISBN: (纸本)9781538660720

The fixture is an important equipment, and is widely used in the auto-body panels to be assembled and welded. However, most fixtures, which installed on the production lines, are special to make the production cost higher and the production efficiency lower. Therefore, the reconfigurability of the fixture becomes a key factor that effects the production efficiency of automobiles. To handle the above problems, the new reconfigurable fixture robot is proposed in this paper, which can meet the handing, assembling and welding requirements of different automobile's sheet parts on the automobile production lines. First, the three-dimensional model and the kinematic equations of the proposed reconfigurable fixture robot are established. Then, the working space of the reconfigurable fixture robot is also obtained. Finally, the modal analysis of the reconfigurable fixture robot is performed to determine the cause of resonances. Reconfigurable fixture robots are capable of gripping the auto-body panels with the different radii of curvature, which can also meet the work scopes on the production lines. © 2018 IEEE.

关键词： Production efficiency

来源：评论

学校读者我要写书评

暂无评论

Core-shell [email protected] 2 O-graphene-polydopamine interdigitated microelectrode array sensor for in situ determination of salicylic acid in cucumber leaves

引用

Sensors and Actuators B: Chemical 2021年 341卷

作者： Dandan Liu Mingji Li Hongji Li Cuiping Li Guilian Wang Penghai Li Baohe Yang Tianjin Key Laboratory of Film Electronic and Communication Devices Engineering Research Center of Optoelectronic Devices & Communication Technology (Ministry of Education) School of Electrical and Electronic Engineering Tianjin University of Technology Tianjin 300384 PR China Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion Tianjin Key Laboratory of Drug Targeting and Bioimaging School of Chemistry and Chemical Engineering Tianjin University of Technology Tianjin 300384 PR China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology Tianjin 300384 PR China

The in situ detection of active small molecules in plants is one of the key technologies for the development of precision agriculture. An interdigitated microelectrode (IDME) array electrochemical sensor is constructed herein, with three groups of IDME arrays as a three-electrode system. The core-shell [email protected] 2 O-graphene (Gr)-polydopamine (PDA) nanoparticles are densely packed on Al microelectrodes using a three-potential step pulse electrodeposition method. Each of the over 2000 individual microelectrodes is approximately 1 μm wide and 1100 μm in length. The sensor has a high response to salicylic acid (SA) due to the synergistic electrocatalysis of [email protected] 2 O, Gr, and PDA, and the high-density arrangement of the three-electrode unit with microelectrodes. The sensor has a linear concentration range of 0.01–100 μM for SA and the detection limit is as low as 1.16 nM. The SA concentration in cucumber leaves is monitored from the early growth stage to the fruiting stage using the IDME array sensor, and the juice and living stems of the cucumber are detected. The flat structure of the [email protected] 2 O-Gr-PDA IDME array sensor is suitable for attachment onto plant tissues, especially for the in situ detection of SA in leaves.

关键词： Core-shell [email protected] 2 O-graphene-polydopamine Interdigitated microelectrode array Sensor Salicylic acid Plant

来源：评论

学校读者我要写书评

暂无评论

Pickup Manipulator design and Its Kinematics Simulation 2

Pickup Manipulator Design and Its Kinematics Simulation

引用

2018 2nd International Symposium on Resource Exploration and Environmental Science, REES 2018

作者： Zhang, Zhongdang Zhang, Zhaoqiang Ma, Shitai Zhou, Haibo Tianjin University of Technology Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin300384 China

In order to improve the flexibility of the pickup manipulator and solve the problem of picking up small sports balls in training ground such as golfing, tennis, and table tennis, a 5-DOF pickup manipulator structure is designed. According to the pickup task requirements of the manipulator, through theoretical calculations, the 86HS series stepping motor is selected as the driving motors of the front end joints. Based on this, the stepping motor control system is designed to realize the closed-loop control of the manipulator. Then the manipulator model is built using D-H method, the inverse kinematics solution is calculated, and the analysis of kinematic theory is conducted. Finally, the targeted pickup point is selected to carry out case simulation analysis of the manipulator, the motion law of the manipulator is verified to be reasonable and the task of picking up small sports balls is completed. © Published under licence by IOP Publishing Ltd.

关键词： Manipulators

来源：评论

学校读者我要写书评

暂无评论

Vibration Absorption Efficiency and Higher Branches Elimination of Variable-Stiffness Nonlinear Energy Sink

引用

Journal of Harbin Institute of Technology 2020年第1期

作者： Rui Zhong Jian’en Chen Weimin Ge Jun Liu Xiaofeng Wang Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System National Demonstration Center for Experimental Mechanical and Electrical Engineering Education

来源：评论

学校读者我要写书评

暂无评论

Kinematics Analysis of Walking Robot Based on Double Stewart Parallel Mechanism

Kinematics Analysis of Walking Robot Based on Double Stewart...

引用

Chinese Automation Congress (CAC)

作者： Shuo Jia Wei Chen Wenchang Zhang Hang Wu Weixiao Li Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology Tianjin China Academy of Military Sciences of Chinese PLA Institute of Medical Support Technology Tianjin China Information Management and Information System Nanjing University of Posts and Telecommunications Nanjing China

Parallel mobile robots have recently attracted wide attention due to their strong load capacity, high running stability and rapid response speed. This paper conducts the kinematics research based on a pair of novel mobile legs that consist of a dual Stewart parallel mechanism. Firstly, we describe its motion mechanism and analyze the DOF of the mechanism in detail. Secondly, the forward and inverse kinematic solutions of the mechanism are computed and analyzed, and then the workspace is obtained by Matlab simulation. Thirdly, according to the principle of kinematics, we carry out dynamic performance optimization research to analyze and compare various motion control rules. Finally, the human-computer interface is designed for ease of analysis and displaying the kinematic rules of robot motion.

关键词： Legged locomotion Robot kinematics Mobile robots Motion control Stability

来源：评论

学校读者我要写书评

暂无评论

Development of an HCN dual laser for the interferometer on EAST

引用

Plasma Science and Technology 2017年第8期19卷 37-42页

作者：李根魏学朝刘海庆申俊杰揭银先连辉曾龙邹志勇张际波王守信 Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System Tianjin University of Technology Institute of Plasma Physics Chinese Academy of Sciences

A two-color continuous wave（CW） discharge-pumped far-infrared（FIR） hydrogen cyanide（HCN） laser was developed as the source of an interferometer for measuring the line-averaged electron density in the Experimental advanced Superconducting Tokamak（EAST）. The output power of the dual laser system was about 120 m W from each laser on the 337 μm（0.89 THz）line. The polarization of each output beam was fixed using thin tungsten filaments and oscillated in the EH11 mode. Different megahertz intermediate frequencies（IF） and a slight frequency offset（～1 MHz） were generated in this system to replace the traditional rotating grating with～10 k Hz IF, and this can improve the time resolution of the interferometer significantly. The experimental result showed that different IF signals were obtained by successfully adjusting the cavity length. In particular, the beat frequency was captured at ～1.3 MHz by a Schottky mixer when the length of the resonant cavities was changed by 5 μm by an automatic adjustment system. In order to study the character of IF, a long time record of the IF signal was carried out,and the IF signal could be stabilized for a few minutes in the range of 2 MHz to 3 MHz. A realtime IF stability control system was initially designed for long pulse discharge experiments on the EAST. The ～MHz frequency response and good phase sensitivity of the dual laser HCN interferometer will allow the system to track fast density profiles and resolve fast MHD events,such as tearing/neoclassical tearing, disruptions, etc.

关键词： EAST interferometer Schottky pumped mixer captured tungsten grating resonant rotating

来源：评论

学校读者我要写书评

暂无评论

Kinematic Analysis of a Redundant Actuated Five Degrees of Freedom Parallel Mechanism

Kinematic Analysis of a Redundant Actuated Five Degrees of F...

引用

2018 IEEE International Conference on Robotics and Biomimetics, ROBIO 2018

作者： Xiaolong, Yin Bin, Li Xinhua, Zhao Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology China Fac. of Natl. Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China

ISBN: (纸本)9781728103761

A 5 degree of freedom parallel mechanism with 6 branched redundant actuators is proposed. The mechanism is composed of 4 -SPS and 2-RPS kinematic branches. The mechanism can achieve three rotational and two translational motion. The performance of the forward and inverse kinematics, singularity and workspace, is analyzed, firstly, using the vector algebra method and Newton iteration method, the forward and inverse kinematics model were obtained from numerical solution and analytic solution;on this basis, get the Jacobian matrix of mechanism, and on the basis of the three kinds of performance parameters of matrix the singularity of the mechanism was analyzed;finally with the help of Monte Carlo method, obtaining the workspace of the mechanism. The related kinematic analysis will lay a theoretical foundation for the future study of the dynamics. © 2018 IEEE.

关键词： Mechanisms

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：