检索结果-内蒙古大学图书馆

2016 IEEE advanced Information Management,Communicates,Electronic and Automation control Conference(IMCEC 2016)

作者： ZHAO Xin-hua LUAN Qian-qian ZHAO Lei WANG Shou-jun GE Wei-min FAN Meng-ran Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronic System Tianjin University of Technology School of Mechanic Engineering

ISBN: (纸本)9781509001668

The parallel manipulator has some advantages of high accuracy,high speed and high stiffness *** makes up for the shortcomings of serial *** the parallel mechanism becomes a potential motion platform with high speed and high *** poles parallel robot improves these defects of more singularity,poor load capacity and low stiffness which exist in workspace of the classic plane five poles parallel *** and forward kinematic models are established based on the structure of the *** influence of foundation beds' location error,driving angle error and rod processing error on control accuracy is systematically *** theoretical foundation has been provided for realizing the optimal design of the robot and control in high accuracy.

关键词： high speed parallel robot kinematics error analysis

来源：评论

学校读者我要写书评

暂无评论

Pickup Manipulator design and Its Kinematics Simulation

引用

IOP Conference Series: Earth and Environmental Science 2018年第4期170卷

作者： Zhongdang Zhang Zhaoqiang Zhang Shitai Ma Haibo Zhou Tianjin University of Technology Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin 300384 China National Demonstration Center for Experimental Mechanical and electrical Engineering Education (Tianjin University of Technology) Tianjin 300384 China

In order to improve the flexibility of the pickup manipulator and solve the problem of picking up small sports balls in training ground such as golfing, tennis, and table tennis, a 5-DOF pickup manipulator structure is designed. According to the pickup task requirements of the manipulator, through theoretical calculations, the 86HS series stepping motor is selected as the driving motors of the front end joints. Based on this, the stepping motor control system is designed to realize the closed-loop control of the manipulator. Then the manipulator model is built using D-H method, the inverse kinematics solution is calculated, and the analysis of kinematic theory is conducted. Finally, the targeted pickup point is selected to carry out case simulation analysis of the manipulator, the motion law of the manipulator is verified to be reasonable and the task of picking up small sports balls is completed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Finite Element Analysis on Loosen Teeth using Fibrous Periodontal Splint Restoration

引用

IOP Conference Series: Materials Science and Engineering 2018年第1期417卷

作者： Chengshui Ding Xue Shi Yang Song Lulu Qiu Xinyue Li Chunqiu Zhang Tianjin Key Laboratory of the Design Intelligent Control of the Advanced Mechatronical System National Demonstration Center for Experimental Mechanical and Electrical Engineering Education School of Mechanical Engineering Tianjin University of Technology Tianjin 300384 China Periodontitis Department Tianjin Stomatological Hospital Tianjin 300384 China

Objective To investigate the effect of fibre periodontal splint restoration on mandibular anterior teeth displacement and periodontal membrane stress. Methods Micro-CT scanning technology, combined with Mimics, Geomagic studio and SolidWorks were used to establish 3D dental models of mandibles with teeth and the models fibre periodontal splint restoration; the models of mandibular anterior loosen teeth was constructed under 30 degree oblique 25N loading on the labial and lingual sides respectively. Then, under different angles force with or without the splint, the analysis on dental mechanical state are given. Results It was determined that the sum of the maximal displacement of the loosen tooth model at the lingual and labial sides was 1 mm, which represented the degree I loosen model. After splint repair on the model, the maximal displacement of loosen tooth decreased 47.7%, 85.1% and 85.8% at 0 degree, 15 degree and 30 degree forces respectively, and the maximum stress of periodontal membrane decreased by 22.3%, 61.2% and 74.9%. Conclusion Fixation of loosen teeth through fibre periodontal splints can reduce the maximum stress of periodontal membrane and the maximal displacement of the teeth, thus ensuring the stability of loosen tooth.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Short-term creep behavior in P91 heat-resistant steel at low stress

Short-term creep behavior in P91 heat-resistant steel at low...

引用

Chinese Materials Congress on Methods of design and Characterization of Materials, Research and Development of Technological Processes, 2015

作者： Zhao, Pengshuo Shen, Junjie Zhang, Hui Tianjin key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System School of Mechanical Engineering Tianjin University of Technology 391 Binshui Road Xiqing District Tianjin China Tianjin Entry-Exit Inspection and Quarantine Bureau China

ISBN: (纸本)9783038357629

P91 heat-resistant steel is widely used in the high temperature of piping components of thermal power plants and nuclear power plants. In these conditions, the typical failure of P91 is mainly caused by creep at low stress. In this investigation the short-term creep behavior in P91 at low stress was investigated by helicoid spring creep test due to its high strain-sensitivity. The helicoid spring creep was based on the assumption of pure torsion. The mechanics field was firstly studied by ANSYS finite-element simulation to find the establishing conditions of pure torsion. Secondly, the creep properties of P91 were studied under the conditions of the temperatures of 0.38Tmm and the stresses of 14.6 MPa, 25 MPa, 34 MPa, respectively. The ANSYS finite-element simulation shows that the creep deformation is considered to be pure torsion when the pitch spacing of coil is between 2mm to 4mm. The creep curves show "Normal type ", and "the stress exponent" is n=0.9. © 2016 Trans Tech Publications, Switzerland.

关键词： Creep

来源：评论

学校读者我要写书评

暂无评论

A new bioreactor for compound loading with torsion and compression

A new bioreactor for compound loading with torsion and compr...

引用

第五届国际仿生工程学术大会(ICBE2016)

作者： Ke Li Chunqiu Zhang School of mechanical engineering Tianjin University of Technology Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechanical System

This paper presents a new type of multifunctional bioreactor, which is to provide cell tissue a mechanical environment which is close to the real situation. This bioreactor is based on the concept of fatigue machine, add torsion module to compress and tension module, with new design of both loading device and culturing device by modern CAD technology. Driven by voice coil motor, step motor and a well designed mechanical structure, this machine has excellent controlling performance and no accumulated error, easy to adjust operating height, loading frequency, compressing stroke and torsioning angle. It has different loading modes, with compression or torsion separately, or providing compound load with both torsion and compression. With a delicate culturing device, the height and the limit of loading head is easy to adjust accordingly, it can also provide liquid environment during the loading process, which is closer to biological characteristics and physiological environment. After simple refit, it's also able to be used as a tension machine. This machine supplies different mechanical environment for biomechanics research to make related experiments more effective and accurate.

关键词： bioreactor compound loading torsion and compression

来源：评论

学校读者我要写书评

暂无评论

Calculations of the Acceleration of Centrifugal Loading on Adherent Cells

引用

IOP Conference Series: Materials Science and Engineering 2017年第1期224卷

作者： Kang Chen Yang Song Qing Liu Chunqiu Zhang Tianjin Key Laboratory of the Design Intelligent Control of the Advanced Mechatronical System School of Mechanical Engineering Tianjin University of Technology Tianjin 300384 China

Studies have shown that the morphology and function of living cells are greatly affected by the state of different high acceleration. Based on the centrifuge, we designed a centrifugal cell loading machine for the mechanical biology of cells under high acceleration loading. For the machine, the feasibility of the experiment was studied by means of constant acceleration or variable acceleration loading in the Petri dish fixture and/or culture flask. Here we analyzed the distribution of the acceleration of the cells with the change of position and size of the culturing device quantitatively. It is obtained that Petri dish fixture and/or culture flask can be used for constant acceleration loading by experiments; the centripetal acceleration of the adherent cells increases with the increase of the distance between the rotor center of the centrifuge and the fixture of the Petri dish and the size of the fixture. It achieves the idea that the general biology laboratory can conduct the study of mechanical biology at high acceleration. It also provides a basis for more accurate study of the law of high acceleration on mechanobiology of cells.

关键词：

来源：评论

学校读者我要写书评

暂无评论

design and kinematics analysis of a novel liquid-brewing steamer feeding robot

Design and kinematics analysis of a novel liquid-brewing ste...

引用

2016年土木、建筑与环境工程国际学术会议

作者： Jiashuang Zhang Bin Li Tongchen Zhang Xinhua Zhao Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology

ISBN: (纸本)9781138065833

In this paper,a novel steamer feeding robot is designed and *** compared to the currently used steamer feeding robot,the feeding process of the proposed robot is continuous,and this way will greatly improve the efficiency and quality of the feeding ***,the mechanical structure and kinematics of the novel steamer feeding robot are introduced and *** then,the control system of the robot is ***,experiment evidences are given to prove the efficiently of brewing by using this robot.

关键词： design and kinematics analysis of a novel liquid-brewing steamer feeding robot

来源：评论

学校读者我要写书评

暂无评论

Experimental Study On The Identification Model Of Dynamic Milling Force Coefficient

Experimental Study On The Identification Model Of Dynamic Mi...

引用

2016 4th International Conference on Machinery,Materials and Computing Technology(ICMMCT 2016)

作者： Xinghua Niu Tianding Wang Tiemin Zhao Qianyou Huang Tianjin University of Technology Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System

The identification model of milling force coefficient is established using the model of dynamic milling force and the regression analysis of the milling force experiment data. On the basis of the existing milling force model, by simplifying and calculation, it can get the relational expression between milling force coefficient and average value of the milling force. Arranging the milling force experiment and measuring average milling force, the experiment results of milling force coefficient can be calculated. Then, the polynomial expression of identification model of milling force coefficient is established, and its coefficient values can be got by regression analysis. Finally, the accuracy and applicability of the identification model is verified by experiment. The experimental results show that the prediction results of the model are accurate and reliable, and can meet different processing conditions, provide the theoretical basis and reference for the further study of milling process and optimization.

关键词： milling force model coefficient identification orthogonal experiment regression analysis

来源：评论

学校读者我要写书评

暂无评论

Application and development of digital image correlation method in biomechanics

Application and development of digital image correlation met...

引用

第五届国际仿生工程学术大会(ICBE2016)

作者： Qiu Lulu Zhang Chunqiu School of Mechanical Engineering Tianjin University of Technology Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechanical System School of Mechanical EngineeringTianjin University of Technology

With the rapid development of computer technology and electronic equipment, as well as the corresponding improvement of algorithm, digital image correlation technology has attracted the attention of all walks of life. The digital image correlation method possesses a series of advantages like simple optical path, high precision and fast processing speed, which meets the demand of unique biomechanical properties and biological organization environment. This paper analyses the development process through the research of digital image correlation method and summarizes its application in biomechanical *** study also presents the method of digital image using in biomechanics aspects, showing the research progress and development trends about digital image correlation method in biomechanics. Besides this paper suggests some difficult problem existing to be solved and puts forward the corresponding solutions.

关键词： Digital image correlation method biomechanic speckle

来源：评论

学校读者我要写书评

暂无评论

Comparative Study of Two 2-RPU+SPR Parallel Manipulators

Comparative Study of Two 2-RPU+SPR Parallel Manipulators

引用

World Congress on intelligent control and Automation

作者： Qiang Yan Bin Li Yangmin Li Xinhua Zhao Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin 300191 China

ISBN: (纸本)9781467384155

A comparative study of two over-constrained 2-RPU+SPR parallel manipulators (PM) is studied in terms of workspace and transmission performance in this paper. The two 2-RPU+SPR PMs have identical kinematics limbs, but some differences exist in terms of the joints distribution. The kinematics, the workspace and the transmission performance are studied and simulation examples are presented to demonstrate the differences between the two PMs. This study provides insights into the two parallel manipulators with identical limbs but with different joints distribution.

关键词： Decision support systems TV intelligent control Automation Senior members

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：