检索结果-内蒙古大学图书馆

Research Square 2021年

作者： Li, Shuangbao Wang, Tingting Chen, Jianen Research Institute of Science and Technology Innovation Civil Aviation University of China Tianjin300300 China College of Science Civil Aviation University of China Tianjin300300 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China

A new highly efficient elastic-impact bistable nonlinear energy sink (EI-BNES) based on magnetic-elastic impacts with negative stiffness and bistability is proposed and optimized through global dynamical analysis. The EI-BNES has better robustness and higher energy dissipation rates with nearly more than 96.5% for broadband impulsive excitations than the traditional cubic NESs and single bistable NESs. The structure of negative stiffness impacts is realized by reasonable layout of permanent ring magnets and springs. A two-degree-of-freedom (two-DOF) elastic-impact system is established to describe the coupled nonlinear interaction between the main structure and the attached EI-BNES. A global Melnikov reduction analysis (GMRA) is proposed to study global dynamics and homoclinic bifurcations of the reduced two-dimensional subsystem, which is used to explain the mechanism of nonlinear targeted energy transfer (TET) and detect the threshold of impulsive amplitudes of EI-BNES for in-well and compound motions between in-well and cross-well resonance responses. A special type of saddle-center equilibrium points is also found in the non-smooth system of the EI-BNES and can be used to effectively increase the energy dissipation rates. The optimal design criterion of the tuned EI-BNES for better dissipation performance is also first discussed based on the GMRA and numerical techniques for calculating the Melnikov function of the non-smooth systems. The effectiveness of the analytical GMRA is also verified by numerical simulations. © 2021, CC BY.

关键词： Stiffness

来源：评论

学校读者我要写书评

暂无评论

design of control system for Lower Limb Rehabilitation Robot on the Healthy Side sEMG Signal

Design of Control System for Lower Limb Rehabilitation Robot...

引用

IEEE International Conference on Mechatronics and Automation

作者： Shiqin Yu Jian Guo Shuxiang Guo Qiang Fu Tianjin Key Laboratory for Control Theory & Applications in Complicated Systems and Intelligent Robot Laboratory Tianjin University of Technology Binshui Xidao Extension 391 Tianjin China Shenzhen Institute of Advanced Biomedical Robot Co. Ltd. No.12 Ganli Sixth Road Jihua Street Longgang District Shenzhen China Key Laboratory of Convergence Medical Engineering System and Healthcare Technology The Ministry of Industry and Information Technology School of Life Science Beijing Institute of Technology No.5 Zhongguancun South Street Beijing China

With the number of stroke patients increasing year by year, rehabilitation exoskeleton robot has been paid more and more attention. For the rehabilitation exoskeleton robot, human-computer interaction ability is an important index, which affects the effect of rehabilitation therapy to a great extent. Surface Electromyography (sEMG) signals are the combined effect of sEMG signals and electrical activities on nerve stem on the skin surface, which can reflect neuromuscular activities in advance and can be used to predict movement intention by sEMG signals. Therefore, this article proposes to use sEMG signals to monitor the motion information of the healthy leg in real-time, extract the characteristics of the electromyography signals, use the sEMG of the healthy leg as the control signal, reflect the motion patterns reflected by the sEMG collected from the healthy side, and then use the motion intention recognition method of Long Short Term Memory(LSTM) neural network to identify the motion intention of the prosthetic limb by identifying the motion patterns of the swing phase of the healthy side. The results indicate that the predicted maximum Root Mean Squared Error(RMSE) is 5.3729, which proves the feasibility of using LSTM model for motion intention recognition and contributes to the real-time and accuracy of lower limb exoskeleton rehabilitation.

关键词：

来源：评论

学校读者我要写书评

暂无评论

基于自解耦三明治结构的横向运动栅场效应晶体管MEMS微力传感器

引用

Engineering 2023年第2期21卷 61-74,M0004页

作者：高文迪乔智霞韩香广王小章 Adnan Shakoor 刘存朗卢德江杨萍赵立波王永录王久洪蒋庄德孙东 State Key Laboratory for Manufacturing Systems Engineering International Joint Laboratory for Micro/Nano Manufacturing and Measurement TechnologiesOverseas Expertise Introduction Center for Micro/Nano Manufacturing and Nano Measurement Technologies Discipline InnovationXi’an Jiaotong University(Yantai)Research Institute for Intelligent Sensing Technology and SystemSchool of Mechanical EngineeringXi’an Jiaotong UniversityXi’an 710049China Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing Yantai 265503China Beijing Advanced Innovation Center for Intelligent Robots and Systems Beijing Institute of TechnologyBeijing 100081China State Key Laboratory of Robotics and Systems Harbin Institute of TechnologyHarbin 150006China Eleventh Research Institute Sixth Academy of China Aerospace Science and Technology Co.Xi’an 710100China Department of Control and Instrumentation Engineering King Fahd University of Petroleum and MineralsDhahran 31261Saudi Arabia Department of Biomedical Engineering City University of Hong KongHong Kong 999077China

本文介绍了一种基于横向可移动栅极场效应晶体管(LMGFET)的新型微型力传感器的开发。提出了一种精确的电气模型,用于小型LMGFET器件的性能评估,与以前的模型相比,其精度有所提高。采用了一种新型三明治结构,该结构由一个金交叉解耦栅阵... 详细信息

本文介绍了一种基于横向可移动栅极场效应晶体管(LMGFET)的新型微型力传感器的开发。提出了一种精确的电气模型,用于小型LMGFET器件的性能评估,与以前的模型相比,其精度有所提高。采用了一种新型三明治结构,该结构由一个金交叉解耦栅阵列层和两个软光阻层SU-8组成。通过所提出的双差分传感结构,LMGFET横向工作在垂直干扰下的输出电流被大大消除,所提出传感器的相对输出误差从4.53%(传统差分结构)降低到0.01%。提出了一种实用的传感器制造工艺,并对其进行了模拟。基于LMGFET的力传感器的灵敏度为4.65μA·nN^(-1),可与垂直可移动栅极场效应晶体管(VMGFET)器件相媲美,但非线性度提高了0.78%,测量范围扩大了±5.10μN。这些分析为LMGFET器件的电气和结构参数提供了全面的设计优化,并证明了所提出的传感器在生物医学显微操作应用中具有良好的力传感潜力。

关键词：力传感器场效应晶体管横向运动三明治结构电气模型显微操作非线性度双差分

来源：评论

学校读者我要写书评

暂无评论

Compound nonlinear energy sink with multiple motion types for absorbing energy from wide excitation ranges

引用

Journal of Sound and Vibration 2025年 617卷

作者： Jianen Chen Jiaqi Zhao Wei Zhang Min Sun Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin 300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin 300384 China School of Civil Engineering and Architecture Guangxi University Nanning 530004 China School of Science Tianjin Chengjian University Tianjin 300384 China

Nonlinear energy sink (NES) has garnered significant attention since its inception due to its notable broadband vibration reduction capability. However, the introduction of strong nonlinear characteristics by NESs complicates system responses, leading to a loss of effectiveness when the excitation force exceeds a specific threshold. Consequently, NESs have limited applicability in engineering because they are effective only within a constrained range of excitation amplitude. In this study, a compound NES (CNES) with multiple motion types is designed to extend the effective force range while maintaining broadband vibration reduction capability. The CNES is distinguished by its piecewise stiffness, collision mechanisms, and unique design of two-degree-of-freedom oscillators. The wide effective range of the CNES is demonstrated through slow linear sweep and fixed-frequency tests. The results indicate that the CNES effectively reduces vibrations in the primary oscillator (PO) with various resonant frequencies. Notably, the CNES achieves significant vibration reduction over a particularly wide range of excitation amplitude when controlling the PO with relatively high resonance frequencies (approximately 10.5 Hz and 19 Hz). However, a nonnegligible limitation of the CNES is its restricted effective range of excitation amplitude when the PO resonates at lower frequency (approximately 7 Hz). Moreover, five motion types of the CNES are identified and analyzed, with one motion type autonomously emerging in response to changes in excitation parameters, ensuring excellent vibration reduction performance across a wide excitation range. Finally, the performance of the CNES and a degraded single-degree-of-freedom CNES are compared to further demonstrate the extension effect of the multiple motion types on the effective range. The CNES can be used in scenarios where the parameters of protected systems and excitations vary widely, providing a thought to improve the NESs.

关键词： Compound nonlinearity Compound features Vibration reduction Vibration test Multiple motion types Effective range

来源：评论

学校读者我要写书评

暂无评论

Transformer-LSTM-KOA: A novel approach for prediction of chlorophyll in the South China Sea

引用

Environmental Modelling & Software 2025年 192卷

作者： Gang Chen Zhenzhong Liu Runfeng Zhang Guobin Zhang Jutao Wang Tongrui Zhang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin 300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education (Tianjin University of Technology) Tianjin China School of Environmental Science and Safety Engineering Tianjin University of Technology Tianjin 300384 China Tianjin Hanhailanfan Marine Technology Co. Ltd. Tianjin 300457 China

Chlorophyll is a critical indicator of marine primary productivity and is essential in assessing aquatic ecosystem health. To address the limitations of current prediction models regarding accuracy, mobility, and reliability, this study proposes a novel Transformer-LSTM-KOA model for Chlorophyll prediction. Leveraging remote sensing data from the South China Sea, the model synergistically integrates Transformer's global analytical capabilities via self-attention and multi-head attention mechanisms with LSTM's proficiency in capturing long-term dependencies through gated mechanisms. The Kepler Optimization Algorithm (KOA) is subsequently employed to systematically optimize both global and local model parameters, thereby enhancing adaptability and robustness across diverse prediction datasets. Experimental results demonstrate superior performance with MSE and MAE values of 0.00011 and 0.00685, respectively, outperforming benchmark models. This enhanced modeling framework provides crucial technical support for marine ecological forecasting and early warning systems.

关键词：

来源：评论

学校读者我要写书评

暂无评论

design of a Capsule Robot system for Gastric Hemorrhage Detection using Luminol

Design of a Capsule Robot System for Gastric Hemorrhage Dete...

引用

IEEE International Conference on Mechatronics and Automation

作者： Yuchen Mao Jian Guo Shuxiang Guo Qiang Fu Tianjin Key Laboratory for Control Theory & Application Complicated Systems and Intelligent Robot Laboratory School of Electrical Engineering and Automation Tianjin University of Technology Binshui Xidao Extension 391 Tianjin China Shenzhen Institute of Advanced Biomedical Robot Co. Ltd No.12 Ganli Sixth Road Jihua Street Longgang District Shenzhen China Key Laboratory of Convergence Medical Engineering System and Healthcare Technology The Ministry of Industry and Information Technology School of Life Science Beijing Institute of Technology No.5 Zhongguancun South Street Beijing China

Gastric hemorrhage in upper gastrointestinal bleeding is an obvious indicator of deteriorating gastric disease. This paper proposes a capsule robot system for detecting bleeding in the stomach. The patient ingests a capsule robot containing luminol reagent, which detects bleeding in the stomach via chemiluminescence. The MCU receives the optical sensor signal, and the data is transmitted via radio frequency. The external lower computer receives and forwards the data to the upper computer for processing and display. The data is used to determine the presence and amount of stomach bleeding. Chemiluminescence is an excellent sensor, requiring no external energy supply, and demonstrating excellent sensitivity and selectivity. Combining chemical and electronic sensors presents opportunities for further development. Capsule robot detection reduces the discomfort and risk of secondary injury associated with traditional endoscopy. This paper establishes an experimental platform using porcine blood to simulate human blood, demonstrating the feasibility of the system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Research on Crack Detection of Nonlinear Rotor Based on Energy Tracks

Research on Crack Detection of Nonlinear Rotor Based on Ener...

引用

IEEE International Conference on Mechatronics and Automation

作者： Yu Zhang Jun Liu Zhu Han Tianjin Key Laboratory for Advanced Mechanical System Design and Intelligent Control Tianjin University of Technology Tianjin China National Demonstration Centre for Experimental Mechanical and Electrical Engineering Education Tianjin University of technology

ISBN: (数字)9781728164168

ISBN: (纸本)9781728164175

In rotating machinery, because of high-speed working characteristics and terrible working conditions with variable cycles and variable loads, it is easy for rotors to cause a crack initiation and propagation, which may cause serious harm or even the life-threatening. The super harmonic component is an important role of the crack detection. But it is difficult to reflect the super harmonic component in the high-speed region after super harmonic resonances. In this paper, the dynamic equation of a nonlinear rotor system with a crack is considered, the potential energy expression of the cracked rotor is derived, and the concept of energy tracks is proposed. In the distortion of energy tracks, the effects of different crack parameters and nonlinear parameters on the vibration characteristics of the rotor system are compared. The results show that the energy trajectory distortion can diagnose the crack fault. It provides a new research method for vibration response analyses and fault diagnoses of cracked rotor system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Research on Asymmetrical Dual-rotor system Based on the Energy Orbit

Research on Asymmetrical Dual-rotor System Based on the Ener...

引用

IEEE International Conference on Mechatronics and Automation

作者： Zhu Han Jun Liu Yu Zhang Tianjin Key Laboratory for Advanced Mechanical System Design and Intelligent Control Tianjin University of Technology Tianjin China National Demonstration Centre for Experimental Mechanical and Electrical Engineering Education Tianjin University of technology

ISBN: (数字)9781728164168

ISBN: (纸本)9781728164175

Studying the vibration of asymmetrical dual-rotor is very important for aero engines. In this paper, based on the vibration characteristics of an aero-engine, a different novel coupled dynamic model is proposed based on the spring recovery characteristics of rotor. The model dynamic equations of asymmetrical dual-rotor are obtained by the Lagrange equation, and vibration resonance curves of high pressure and low pressure rotors are numerically simulated and theoretically analyzed by using the Runge-Kutta algorithm. The research show that the system occurs combined vibration, harmonic vibration and superharmonic vibration. In addition, the vibration occurring mechanism was investigated and verified in detail through numerical simulation. For the first time, the concept of energy orbit was introduced into the dual-rotor model system. The energy orbit represents the vibration characteristics and energy exchange process of the model system. Energy orbit is a new energy orbit method for analyzing vibration characteristics of rotor system. The new researches of this paper will show a different research direction for complex dual-rotor systems.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Study on Rotating Speed control of Dissimilar Metal Friction Stir Welding based on Fuzzy PID

引用

Journal of Physics: Conference Series 2022年第1期2206卷

作者： Yongning Liu Zhifeng Qiao Qingjian Liu Jiahao Huang Kang Fu Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin 300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education (Tianjin University of Technology)

The demand for lightweight vehicles that achieve energy conservation and emission reduction continues to grow. Aluminum alloys were commonly applied to the automotive industry to reduce the structural quality of the entire vehicle. However, the cost of aluminum alloy was higher than that of steel, so the industry considered the use of aluminum in combination with low-cost materials such as steel. Traditional welding technology was limited by the great physical difference between aluminum alloy and steel. Friction Stir Welding, a solid phase welding technology, can overcome the connection problem of aluminum and its alloys with steel, but the process parameters of FSW directly affect the welding quality. This paper established the FSW process of two different metals of DC05 and AL6061. Aimed to get a good welding joint, the error of tool speed is reduced by fuzzy PID system established in this paper, and the tool speed is controlled stably. Simulink simulation was established, and compared with the simulation results, fuzzy PID control can control the precision and stability of the tool speed of FSW, improve the welding quality, and provide a certain theoretical basis for the tool speed control.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A SSVEP-Based Wireless Retrieval Robot system

A SSVEP-Based Wireless Retrieval Robot System

引用

Chinese Automation Congress (CAC)

作者： Sihao Yang Tao Xue Shicheng Yan Zekun Tian Yuxin Zhang Qihuai Zhang Jintao Chen Zhongli Bai Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China Tianjin Key Laboratory for Control Theory and Applications in Complicated Systems Tianjin University of Technology Tianjin China

ISBN: (数字)9781728176871

ISBN: (纸本)9781728176888

The brain-computer interface (BCI) plays an important role in assisting the disabled in life support and entertainment. In this study, a wireless retrieval robot system for steady-state visual evoked potential (SSVEP) based BCI system was proposed. In order to improve the recognition accuracy and system stability of BCI system for subjects' instructions, in this study, offline and online experiments are used to study and solve the performance parameters, obstacle avoidance and retrieval performance of BCI respectively. In the offline experiment, 5 types of SSVEP data of 4 subjects were used. Based on CCA algorithm, the multi-channel fusion recognition accuracy, time window length (TWL), command activation margin and other aspects are studied. The optimal experimental parameters are determined. Online experiments are based on the optimal test parameters of offline experiments, 8 subjects were used to study the performance of obstacle avoidance and retrieval. The online experiments achieved an average accuracy of 87.89 ± 6.62% with an ITR of 23.6 ± 4.76 bit/min. Furthermore, the rate of success in grasping three kinds of different difficulty preset targets was 61.38%.

关键词： Electroencephalography Robots Electrodes Correlation coefficient Task analysis Visualization Liquid crystal displays

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：