检索结果-内蒙古大学图书馆

Nonreciprocity of energy transfer in a nonlinear asymmetric oscillator system with various vibration states

Applied Mathematics and Mechanics(English Edition) 2023年第5期44卷 727-744页

作者： Jian’en CHEN Jianling LI Minghui YAO Jun LIU Jianhua ZHANG Min SUN Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical EngineeringTianjin University of TechnologyTianjin 300384China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of TechnologyTianjin 300384China School of Aeronautics and Astronautics Tiangong UniversityTianjin 300387China Agricultural Information Institute of Chinese Academy of Agricultural Sciences Key Laboratory of Agricultural Big DataMinistry of Agriculture and Rural AffairsBeijing 100081China School of Science Tianjin Chengjian UniversityTianjin 300384China

The nonreciprocity of energy transfer is constructed in a nonlinear asymmetric oscillator system that comprises two nonlinear oscillators with different parameters placed between two identical linear *** slow-flow equation of the system is derived by the complexification-averaging *** semi-analytical solutions to this equation are obtained by the least squares method,which are compared with the numerical solutions obtained by the Runge-Kutta *** distribution of the average energy in the system is studied under periodic and chaotic vibration states,and the energy transfer along two opposite directions is *** effect of the excitation amplitude on the nonreciprocity of the system producing the periodic responses is analyzed,where a three-stage energy transfer phenomenon is *** the first stage,the energy transfer along the two opposite directions is approximately equal,whereas in the second stage,the asymmetric energy transfer is *** energy transfer is also asymmetric in the third stage,but the direction is reversed compared with the second ***,the excitation amplitude for exciting the bifurcation also shows an asymmetric *** vibrations are generated around the resonant frequency,irrespective of which linear oscillator is *** excitation threshold of these chaotic vibrations is dependent on the linear oscillator that is being *** addition,the difference between the energy transfer in the two opposite directions is used to further analyze the nonreciprocity in the *** results show that the nonreciprocity significantly depends on the excitation frequency and the excitation amplitude.

关键词： nonreciprocity strong nonlinearity energy transfer chaotic vibration higher branch of response

来源：评论

学校读者我要写书评

暂无评论

Path Tracking controller design of Automated Parking systems via NMPC with an Instructible Solution

引用

Chinese Journal of mechanical Engineering 2024年第3期37卷 353-367页

作者： Liang Chen Zhaobo Qin Manjiang Hu Yougang Bian Xiaoyan Peng State Key Laboratory of Advanced Design and Manufacturing Technology for Vehicle College of Mechanical and Vehicle EngineeringHunan UniversityChangsha 410082China Wuxi Intelligent Control Research Institute of Hunan University Wuxi 214115China

Parking difficulties have become a social issue that people have to *** parking system is practicable for quick par operations without a driver which can also greatly reduces the probability of parking *** paper proposes a Lyapunov-based nonlinear model predictive controller embedding an instructable solution which is generated by the modified rear-wheel feedback method(RF-LNMPC)in order to improve the overall path tracking accuracy in parking ***,A discrete-time RF-LNMPC considering the position and attitude of the parking vehicle is proposed to increase the success rate of automated parking ***,the RF-LNMPC problem with a multi-objective cost function is solved by the Interior-Point Optimization,of which the iterative initial values are described as the instructable solutions calculated by combining modified rear-wheel feedback to improve the performance of local optimal ***,the details on the computation of the terminal constraint and terminal cost for the linear time-varying case is *** closed-loop stability is verified via Lyapunov techniques by considering the terminal constraint and terminal cost ***,the proposed RF-LNMPC is implemented on a selfdriving Lincoln MKZ platform and the experiment results have shown improved performance in parallel and vertical parking *** Monte Carlo analysis also demonstrates good stability and repeatability of the proposed method which can be applied in practical use in the near future.

关键词： Automated parking Path tracking controller Nonlinear model predictive control Monte Carlo analysis

来源：评论

学校读者我要写书评

暂无评论

Anomaly Detection of Logistics Packages Based on CNN and Image Recognition Technology 4

Anomaly Detection of Logistics Packages Based on CNN and Ima...

引用

4th IEEE International Conference on Data Science and Computer Application, ICDSCA 2024

作者： Liang, Kun Zhang, Hang School of Management Tianjin University of Technology Tianjin China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China

ISBN: (纸本)9798350368239

To address abnormal situations such as packaging damage, liquid leakage, and item displacement during logistics package transportation, this paper introduces Convolutional Neural Network (CNN) and image recognition technology to achieve real-time anomaly detection and alarm, improving the response speed and accuracy of the logistics system. First, by designing multiple layers of convolution and pooling layers, adding Batch Normalization layers and Dropout layers to prevent overfitting, a CNN deep learning model suitable for logistics package anomaly detection is constructed. key features are extracted through image preprocessing methods such as normalization and data enhancement to ensure that the model has high recognition adaptability to various abnormal situations such as damage and leakage. Secondly, through data enhancement methods such as rotation, scaling, brightness adjustment, and transfer learning using pre-trained models, the model's adaptability in different lighting, angles, and occlusion conditions is improved. Finally, the model is applied to actual monitoring, and real-time alarms are issued for abnormalities such as damage and leakage, which are then fed back to the system closed-loop management. This method is significantly better than traditional methods in terms of detection accuracy and response speed. Under natural light environment, the model detection accuracy is as high as 98.4%, reducing false positives and false negatives. Combining CNN's anomaly detection technology effectively improves the accuracy and efficiency of logistics monitoring and provides technical support for intelligent logistics management. ©2024 IEEE.

关键词： Convolutional neural networks

来源：评论

学校读者我要写书评

暂无评论

design of an electronic device for detection of exhaled gas concentration 5

Design of an electronic device for detection of exhaled gas ...

引用

2024 5th International Conference on Electrical, Electronic Information and Communication Engineering, EEICE 2024

作者： Fan, Chuanxiu Liu, Xue Yu, Zhichao Du, Changsong Jia, Shengde Liu, Qing Yan, Pengbo Tianjin Key Laboratory of Film Electronic and Communication Device Tianjin University of Technology Tianjin300384 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology Tianjin300384 China Tianjin Chest Hospital Tianjin300384 China

To enable preliminary diagnosis of various diseases in the human body, detecting the concentrations of targeted components in exhaled gases is an effective way without invasive diagnosis. An exhaled gas concentration detection device is proposed in this paper. Firstly, this device employs a high-accuracy analog front end (AFE) for transmitting the concentrations of targeted components to an electronic voltage signal. The core circuit of AFE is a high-precision and low-current constant current source. Secondly, a heating circuit with controllable temperature is also designed to provide an appropriate operating temperature for different types of gas sensor materials. Thirdly, the system applies a microcontroller to directly read multiple-channel gas concentrations and independently control multiple heating circuits. The performance of the device has been validated through simulations. © Published under licence by IOP Publishing Ltd.

关键词： Computer resource management

来源：评论

学校读者我要写书评

暂无评论

UWB Non-Line-of-Sight Recognition and Suppression Methodology 15

UWB Non-Line-of-Sight Recognition and Suppression Methodolog...

引用

15th International Conference on Communication Software and Networks, ICCSN 2023

作者： Ni, Zhengshuai Zhou, Haibo Zhang, Guozheng Xu, Wangbei Tianjin University of Technology National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin China School of Mechanical Engineering Tianjin University Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin China

ISBN: (纸本)9798350329360

Ultra-Wide Band (UWB) positioning system has become the main research object in indoor positioning field due to its superior positioning performance. Accuracy at the scale of centimeters is achievable in an ideal positioning scenario. Nonetheless, the intricate and changeable indoor surroundings may cause UWB signals to propagate beyond the line-of-sight (LOS) and weaken in signal strength, resulting in a considerable reduction in the precision of positioning. In this paper, methods for identifying non-line-of-sight (NLOS) errors, alleviating NLOS errors, and integrating multi-sensor information are analyzed and studied to provide reference for improving the NLOS positioning accuracy of UWB. © 2023 IEEE.

关键词： alleviate identify multi-sensor NLOS UWB

来源：评论

学校读者我要写书评

暂无评论

Wireless power transmission system with CC and CV output based on hybrid LCC-S/P topology 5

Wireless power transmission system with CC and CV output bas...

引用

5th International Conference on Electronics and Communication, Network and Computer Technology, ECNCT 2023

作者： Li, Kun Gong, Zheng Meng, Jiaheng Liu, Qing Tianjin University of Technology Tianjin Key Laboratory of Film Electronic and Communication Device Tianjin China Tianjin University of Technology Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin China

ISBN: (纸本)9798350328660

Wireless Power Transfer (WPT) technology provides a convenient and efficient power supply solution for mobile devices. The utilization of constant current (CC) and constant voltage (CV) control in WPT systems proves valuable for charging battery applications. This paper presents a novel WPT system with CC and CV output characteristics, employing a switching topology. Specifically, the LCC-S and LCC-P topologies are applied and rigorously simulated. The proposed MCR-WPT system's output characteristics in both CC and CV modes are meticulously validated using Saber software. The simulation results distinctly demonstrate the system's capability to achieve CC and CV outputs within a varying load resistance range of 5Ω to 30Ω, thus conclusively establishing the efficacy of the topology switching technology. © 2023 IEEE.

关键词： Topology

来源：评论

学校读者我要写书评

暂无评论

An accurate pose measurement method of workpiece based on rapid extraction of local feature points

引用

Optoelectronics Letters 2022年第6期18卷 372-377页

作者： ZHANG Jiangtao QIAO Zhifeng WANG Shihao Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical EngineeringTianjin University of TechnologyTianjin 300384China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of TechnologyTianjin 300384China

Ceramic sanitary products with complex curved surfaces are generally fragile and difficult to *** the industrial robot is utilized to realize the automatic grinding of such products,the precise positioning of the product is required *** this paper,an accurate pose measurement system for complex curved surface parts is designed by point cloud registration *** order to improve the stability of the system,this paper combines the advantages of normal vector features and fast point feature histogram(FPFH)features,and proposes a point cloud registration algorithm based on the rapid extraction of local feature *** results verify that the improved algorithm has improved both efficiency and accuracy,and the system can effectively achieve accurate positioning of products.

关键词： robot system curved

来源：评论

学校读者我要写书评

暂无评论

Multi-objective optimization of heat sink with multi-cross-ribbed-fins for a motor controller

引用

Journal of Engineering and Applied Science 2022年第1期69卷 1-21页

作者： Zhang, Chao Chen, Liang Tong, Zhiting Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China

A novel multi-cross-ribbed-fin layout was proposed to supersede the original smooth fin to fulfill the lightweight requirement of the air-cooled heat sink for the electrical vehicle motor controller. The thermal design with multi-cross-ribbed-fins was optimized using the multi-objective optimization method to minimize the chip’s temperature rise and the weight of the heat sink simultaneously. The design variables are the number of multi-cross-ribbed-fins ranging from 12 to 24, the number of cross ribs on either side varying from 1 to 4, and cross rib height in the region of 1.00–2.50mm. The standard k-Ε turbulence model was validated compared to the experimental data for the original heat sink with smooth fins. The Pareto front solution set was obtained by performing the mixed-level orthogonal design procedure with the numerical simulations, constructing the surrogated-based model with backpropagation neural net training, and implementing the genetic algorithm. The numerical results showed that the recommended optimal designs have the multi-cross-ribbed-fin number of 17–19, the number of cross ribs of 2–3, and a cross rib height of 2.13–2.50mm. The maximum decreases in the temperature rise and weight are 7.63% and 9.45%, respectively. For verifying the superiority of current optimal designs, one of the optimal designs of the heat sink, which yields comparative temperature rise of the chip but reduced weight, was selected to be experimentally tested and compared with the data for the original heat sink. © 2022, The Author(s).

关键词： Genetic algorithms

来源：评论

学校读者我要写书评

暂无评论

A calibration method of external parameters of 2D laser in rotary 3D scanning

引用

Optoelectronics Letters 2022年第12期18卷 730-736页

作者： WANG Shihao QIAO Zhifeng HUANG Jiahao Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical EngineeringTianjin University of TechnologyTianjin300384China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of TechnologyTianjin300384China

Aiming at the problem of external parameter calibration in the combined rotating three-dimensional(3D) scanning process of laser radar and turntable, a fast 3D data scanning and accurate equipment calibration method suitable for industrial application scenarios is proposed. The coordinates of the center of the circle in the laser radar coordinate system are obtained by fitting the coordinates of the center of the circle with the scanning arc. Through the standard size and rotation angle of the target ball, the coordinates of the ball center in the turntable coordinate system are obtained. The rotation parameter R and the translation parameter T of the minimum value of the data set conversion error function in the two coordinate systems are calculated. The experimental results show that the error between the converted data and the actual data is within 0.1 mm, which meets the actual work requirements. This calibration method has the advantages of high accuracy and strong robustness.

关键词： coordinate rotation parameter

来源：评论

学校读者我要写书评

暂无评论

Research on Task Scheduling Algorithms for Cloud-Edge Collaboration 19th

Research on Task Scheduling Algorithms for Cloud-Edge Collab...

引用

19th EAI International Conference on Heterogeneous Networking for Quality, Reliability, Security and Robustness, QShine 2023

作者： Lu, Shuai Zhou, Haibo Zhao, Shuaishuai Xu, Wangbei Fang, Kai Tianjin300384 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China College of Mathematics and Computer Sciences Zhejiang A&F University Hangzhou311300 China

ISBN: (纸本)9783031651229

With the advent of the 5G era, the development of IoT technology has been accelerated. Due to the continuous increase in the amount of data waiting to be processed from the edge, edge nodes may struggle to handle such a vast amount of data. Therefore, the technology of cloud-edge collaboration has emerged, and how to achieve cloud-edge collaborative task scheduling has become a current research hotspot. This article provides a detailed exposition of the relevant work on task scheduling in the cloud-edge environment, and outlines the common optimization objectives in the cloud-edge collaboration scenario. The methods used to solve task scheduling problems are classified and summarized, including heuristic, heuristic algorithm based on linear programming, and meta-heuristic algorithms. The advantages and disadvantages of each algorithm are analyzed. Finally, the development trends of large-scale task scheduling in the cloud-edge environment are discussed, providing valuable insights for achieving real-time performance, efficiency, and energy conservation in the Internet of Things. © ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering 2024.

关键词： Scheduling algorithms

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：