检索结果-内蒙古大学图书馆

Correction to: Emergence of melt and glass states of halide perovskite semiconductors (Nature Reviews materials, (2025), 10.1038/s41578-024-00759-x)

引用

Nature Reviews materials 2025年

作者： Singh, Akash Mitzi, David B. Department of Mechanical Engineering and Materials Science Duke University DurhamNC United States University Program in Materials Science and Engineering Duke University DurhamNC United States Department of Chemistry Duke University DurhamNC United States

Correction to: Nature Reviews materialshttps://***/10.1038/s41578-024-00759-x, published online 9 January 2025 In the version of the article initially published, the Acknowledgements section was missing and has now been added to read "This work is supported by the National science Foundation under grant no. DMR-2114117" in the HTML and PDF versions of the article. © Springer Nature Limited 2025.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Brownian motion of poly(divinylbenzene) nanoparticles in water

引用

Journal of Applied Physics 2023年第11期133卷 114303-114303页

作者： Lin, Ching-Bin Lee, Chia-Wei Ouyang, Hao Yang, Fuqian Lee, Sanboh Mechanical and Electro-Mechanical Engineering Tamkang University New Taipei City251301 Taiwan Department of Materials Science and Engineering National Tsing Hua University Hsinchu300 Taiwan Materials Program Department of Chemical and Materials Engineering University of Kentucky LexingtonKY40506 United States

Understanding the motion of nanoparticles in liquid is of practical importance for drug delivery and fluid flow in nanofluidic systems. In this work, we use a nanoparticle tracking analyzer to investigate the Brownian motion of polydivinylbenzene (PDVB) nanoparticles in water and a video camera to record the aggregation of PDVB aggregates on the water surface. Using water as the liquid medium precludes the possible complex interaction between the liquid medium and the PDVB nanoparticles, which can possibly alter the random characteristics of the motion of the PDVB nanoparticles. The diffusivity of the PDVB nanoparticles determined from the mean square displacements of the PDVB nanoparticles has the same activation energy as that for the intrinsic viscosity of the corresponding aqueous suspension of the PDVB nanoparticles. The correlation between the diffusivity for the motion of the PDVB nanoparticles in water and the intrinsic viscosity of the corresponding aqueous suspension follows the Stokes-Einstein relation. The capillary effect and the interaction between PDVB aggregates and the liquid media enable the aggregation of the PDVB aggregates on the water surface, which follows the first-order reaction with activation energy larger than that for the random motion of the PDVB nanoparticles in water. © 2023 Author(s).

关键词： Nanoparticles

来源：评论

学校读者我要写书评

暂无评论

Symmetric and isotropic micro/nanorotors driven by a plane-polarized gaussian laser beam 18

Symmetric and isotropic micro/nanorotors driven by a plane-p...

引用

Optical Trapping and Optical Micromanipulation XVIII 2021

作者： Ding, Hongru Kollipara, Pavana Siddhartha Kotnala, Abhay Chen, Zhihan Zheng, Yuebing Walker Department of Mechanical Engineering University of Texas at Austin AustinTX78712 United States Materials Science and Engineering Program and Texas Materials Institute University of Texas at Austin AustinTX78712 United States

ISBN: (数字)9781510644359

ISBN: (纸本)9781510644342

The flourishing field of light-powered micro/nanorotors provides promising strategies for manufacturing and biomedical needs. However, the torque of optical rotors typically arises from the momentum exchange with photons, which limits the geometries and materials of objects that can be rotated and requires intense laser beams with designed intensity profile and polarization. These factors inhibit the light-powered rotation of highly symmetric or isotropic targets. Herein, we developed an optothermal micro/nanorotors platform that enables the rotation of various colloids with diverse sizes, materials, and various shapes, including live cells and micro/nanoparticles with high symmetry and isotropy. The long-sought-after out-of-plane rotation has been achieved by a single plane-polarized Gaussian laser beam with an ultralow power. This simple rotor approach is foreseen to open new horizons in colloidal and life sciences by offering a non-invasive and universal manipulation. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only.

关键词： Rotation

来源：评论

学校读者我要写书评

暂无评论

Evolution of hierarchical petal-like 3D SnS2 as high-performance electrode materials for supercapacitor applications

引用

materials Today: Proceedings 2022年 67卷 1039-1042页

作者： Kumar, Niraj Bhusan Sahoo, Bibhuti Chandra Sahu, Krushna Kumar Sahoo, Naresh Naik, Brundabana Soam, Ankur Kumar, Rahul Tripathi, Abhishek Kumar Sahoo, Prasanta Maharashtra Pune 411025 India Department of Mechanical Engineering Siksha ‘O’ Anusandhan Deemed to be University Odisha Bhubaneswar 751030 India Department of Chemistry Environmental Science and Technology Program Siksha ‘O’ Anusandhan Deemed to be University Odisha Bhubaneswar 751030 India Department of Energy Science and Engineering IIT Delhi New Delhi 110016 India Department of Metallurgical and Materials Engineering Malaviya National Institute of Technology Jaipur Jaipur 302017 India

A simple one-step solvothermal approach has been adopted for the synthesis of SnS2. SEM shows hierarchically SnS2 with petal-like 3-dimensional layer structures because of this process. In this investigation, the as-prepared electrode material have an excellent specific capacitance of 721F g−1 at 1 mVs−1, indicating extraordinary performance. The improved electrochemical performance is because to unique ultrathin petal discrete structure, which provides increased electrolyte/electrode interface, high active sites, rapid ion/electron transfer, and short diffusion distances. A manufactured symmetric solid-state supercapacitor (SSC) device also has a large capacity to operate commercial LEDs, which allows for the assessment of its practical applicability in device-level application. According to the findings of this work, suitably layered 3D SnS2 electrode materials could be a promising route for the development of environmentally friendly energy storage applications. © 2022

关键词： Supercapacitor

来源：评论

学校读者我要写书评

暂无评论

Large spin accumulation signals in ultrafast magneto-optical experiments.

arXiv

引用

arXiv 2025年

作者： Anadón, Alberto Singh, Harjinder Díaz, Eva Le-Guen, Yann Hohlfeld, Julius Wilson, Richard B. Malinowski, Gregory Hehn, Michel Gorchon, Jon Université de Lorraine CNRS IJL NancyF-54000 France Department of Mechanical Engineering and Materials Science and Engineering Program University of California RiversideCA United States

Magneto-optical techniques have become essential tools in spintronics, enabling the investigation of spin dynamics in the ultrafast regime. A key challenge in this field has been to accurately isolate the contributions to magneto-optical signals of spin transport phenomena from the local magnetization dynamics. The contribution of transported and accumulated spins was long believed to be orders of magnitude smaller than that of the magnetization and thus previous approaches to disentangle these signals have relied on specific experimental designs, usually including thick metal layers. Here, we present experimental evidence demonstrating that the magneto-optical signal from ultrafast spin accumulations can, under certain conditions, be comparable to or even exceed that of the magnetic layer in a standard ultrafast demagnetization experiment. Our findings provide a new framework for accessing and isolating these spin accumulations, allowing for time and depth dependent probing of transported spin and/or orbital angular momentum. © 2025, CC BY.

关键词： Spin dynamics

来源：评论

学校读者我要写书评

暂无评论

A novel photovoltaic/thermal (PVT) system using nano-enhanced micro-encapsulated PCM slurry for steam production: A numerical study

引用

International Journal of Thermofluids 2025年 27卷

作者： Azmeer, Ahmed Sheikh, Yahya Kanjo, Hasan A. Sabouni, Hamzeh Physical Science and Engineering Department King Abdullah University of Science and Technology Thuwal Saudi Arabia Department of Mechanical Engineering American University of Sharjah Sharjah United Arab Emirates Department of Sustainable and Renewable Energy Engineering University of Sharjah Sharjah United Arab Emirates Materials Science and Engineering Program American University of Sharjah Sharjah United Arab Emirates

As industries reliant on steam-based processes strive to reduce fossil fuel consumption and carbon emissions, interest in renewable technologies, particularly photovoltaic/thermal (PVT) systems that generate both thermal and electrical energy, is increasing. However, the limited thermal performance of PVT systems remains a key barrier. Traditional working fluids, such as water, nanofluids, and phase change material (PCM) slurries, exhibit low thermal conductivity, poor temperature regulation, and inefficient heat storage. To address these issues, a novel working fluid incorporating graphene oxide (GO) nanoparticles into microencapsulated PCM (MPCM) slurry is proposed. The integration of GO nanoparticles not only enhances the dispersion stability of the MPCM slurry but also significantly increases its thermal conductivity, leading to improved heat dissipation from PV cells. A comprehensive CFD investigation is conducted using ANSYS Fluent 2021, employing an Eulerian–Eulerian multiphase model to simulate the three-phase flow. In this model, water serves as the primary phase, while GO nanoparticles and MPCM function as secondary dispersed phases. The results demonstrate that increasing the GO volume fraction from 0 to 0.005 reduces average PV cell temperatures by up to 5°C at 40°C. Additionally, the nano-enhanced MPCM slurry achieves a thermal efficiency of 88.1 % and an electrical efficiency of 10.3 %. It is also found that using MPCM slurry as the working fluid, a 15 % volume fraction of MPCM with a melting point of 40°C achieves the highest thermal efficiency of 90.1 %, outperforming water by 20.1 % and surpassing previous studies on MPCM slurry and nanofluids. © 2025 The Author(s)

关键词： Nanofluidics

来源：评论

学校读者我要写书评

暂无评论

Two-Layer High-Throughput:Effective Mass Calculations Including Warping

引用

engineering 2022年第3期8卷 74-80页

作者： Andrew Supka Nicholas A.Mecholsky Marco Buongiorno Nardelli Stefano Curtarolo Marco Fornari Department of Physics&Science of Advanced Materials Program Central Michigan UniversityMount PleasantMI 48859USA Department of Physics&Vitreous State Laboratory The Catholic University of AmericaWashingtonDC 20064USA Department of Physics&Department of Chemistry University of North TexasDentonTX 76203USA Center for Autonomous Materials Design Duke UniversityDurhamNC 27708USA Department of Mechanical Engineering and Materials Science Duke UniversityDurhamNC 27708USA

In this paper,we perform two-layer high-throughput *** the first layer,which involves changing the crystal structure and/or chemical composition,we analyze selected Ⅲ-Ⅴ semiconductors,filled and unfilled skutterudites,as well as rock salt and layered *** second layer searches the full Brillouin zone(BZ)for critical points within 1.5 eV(1 eV=1.602176×10^(-19)J)of the Fermi level and characterizes those points by computing the effective *** introduce several methods to compute the effective masses from first principles and compare them to each *** approach also includes the calculation of the density-of-states effective masses for warped critical points,where traditional approaches fail to give consistent results due to an underlying non-analytic behavior of the critical *** demonstrate the need to consider the band structure in its full complexity and the value of complementary approaches to compute the effective *** also provide computational evidence that warping occurs only in the presence of degeneracies.

关键词： High-throughput Electronic structure Band warping Effective mass

来源：评论

学校读者我要写书评

暂无评论

Study on the Flow, Foaming Characteristics and Structural Strength of Polypropylene Structural Foam Injection Molding by Innovative Nitrogen and Molten Plastic Mixing Mechanism

引用

Polymers 2023年第9期15卷 2116-2116页

作者： Huang, Po-Wei Peng, Hsin-Shu Hwang, Sheng-Jye Huang, Chao-Tsai Program of Mechanical and Aeronautical Engineering Feng Chia University of Engineering and Science Taichung407102 Taiwan Department of Mechanical and Computer Aided Engineering Feng Chia University of Engineering and Science Taichung407102 Taiwan Department of Mechanical Engineering National Cheng Kung University of Engineering Tainan70101 Taiwan Department of Chemical and Materials Engineering Tamkang University of Engineering New Taipei City251301 Taiwan

Plastic foam molding methods include thermoforming, extrusion and injection molding. Injection foam molding is a one-time molding method with high production efficiency and good product quality. It is suitable for foamed plastic products with complex shapes and strict size requirements. It is also the main method for producing structural bubbles. In this investigation, we developed a structural foam injection molding technology using the gas supply equipment connected to the unique plasticizing mechanism of the injection machine and studied its influence on the specimens’ melt rheology quality and foam structures. In the experiment, the forming material was polypropylene (PP), and the gas for mixing/forming foaming characteristics was nitrogen (N2). Additionally, in order to observe the rheological properties of N2/melt mixing, a melt flow specimen mold cavity was designed and the change in the melt viscosity index was observed using a melt pressure sensing element installed at the nozzle position. With the nitrogen supply equipment connected to a unique plasticizing mechanism, the mixing of gas and molten plastic can be achieved at the screw plasticizing stage, where the foaming effect is realized during the melt-filling process due to the thermodynamic instability of the gas. It was also found that an increase in N2 fill content increased melt fluidity, and the trend of melt pressure and melt viscosity index showed that the higher the gas content, the lower the trend. The foaming characteristic depends on the gas thermodynamic instability and the pressure release, so it can be seen from the melt fill path that, the greater the pressure near the gate, the lower the foaming amount and the internal structure (SEM) after molding;the farther from the gate, the greater the relative increase in the foaming growth/amount. This phenomenon will be more obvious when the N2 fill content is increased. © 2023 by the authors.

关键词： Gases

来源：评论

学校读者我要写书评

暂无评论

Optical Patterning of Two-Dimensional materials

引用

Research 2020年第1期2020卷 1064-1078页

作者： Pavana Siddhartha Kollipara Jingang Li Yuebing Zheng Walker Department of Mechanical Engineering The University of Texas at AustinAustinTX 78712USA Materials Science&Engineering Program and Texas Materials Institute The University of Texas at AustinAustinTX 78712USA

Recent advances in the field of two-dimensional(2D)materials have led to new electronic and photonic devices enabled by their unique properties at atomic *** 2D materials into desired patterns on substrates is often an essential and foremost step for the optimum performance of the functional *** this regard,optical patterning of 2D materials has received enormous interest due to its advantages of high-throughput,site-specific,and on-demand *** years have witnessed scientific reports of a variety of optical techniques applicable to patterning 2D *** this minireview,we present the state-of-the-art optical patterning of 2D materials,including laser thinning,doping,phase transition,oxidation,and *** applications based on optically patterned 2D materials will be discussed as *** further developments,optical patterning is expected to hold the key in pushing the frontiers of manufacturing and applications of 2D materials.

关键词： frontier doping optimum

来源：评论

学校读者我要写书评

暂无评论

!D-architected gratings for polarization-sensitive, nature-inspired structural color

arXiv

引用

arXiv 2024年

作者： Ibarra Miranda, Moisés H. Osterberg, Lars W. Shah, Dev H. Regulagadda, Kartik Poulikakos, Lisa V. Department of Mechanical and Aerospace Engineering Program of Materials Science and Engineering University of California San Diego La Jolla CA United States Program of Materials Science and Engineering University of California San Diego La Jolla CA United States Department of Mechanical and Aerospace Engineering University of California San Diego La Jolla CA United States Laboratory for Multiphase Thermofluidics and Surface Nanoengineering Department of Mechanical Engineering University of California BerkeleyCA United States

Structural coloration, a color-generation mechanism often found in nature, arises from light-matter interactions such as diffraction, interference and scattering, with micro- and nanostructured elements. Herein, we systematically study anisotropic,:D-architected grating structures with polarization-tunable optical properties, inspired by the vivid blue of Morpho butterfly wings. Using two-photon lithography, we fabricate multilayered gratings, varying parameters such as height (through scanning speed and laser power), periodicity, and number of layers. In transmission, significant color transitions from blue to brown were identified when varying structural parameters and incident light polarization conditions (azimuthal angle and ellipticity). Based on thin film diffraction efficiency theory in the Raman-Nath regime, optical characterization results are analytically explained, evaluating the impact of each parameter variation. Overall, these findings contribute to technological implementations of polarization-sensitive,:D-architected gratings for structural color applications. Copyright © 2024, The Authors. All rights reserved.

关键词： Color

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：