检索结果-内蒙古大学图书馆

Refinement of TiB_(2)Powders with High-speed Planetary Mill and Its Effect on TiB_(2)Sinterability

Journal of Wuhan University of technology(materials Science) 2021年第3期36卷 331-337页

作者： HUANG Qiwei AI Ruomeng BAI Wenhui HE Qianglong WANG Aiyang HU Lanxin WANG Weimin The State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Titanium diboride ceramic was produced via spark plasma sintering(SPS)using finer TiB_(2)powder made by high-speed planetary ball *** effects of ball milling parameters on the composites and particle size of TiB_(2)powder were *** was shown that the average particle size of TiB_(2)powder decreased from 5.8 to 1.59μm and the wear rate of WC balls was 1.58 wt%,when the ball-to-powder weight ratio(BPR),the rotary speed and milling time and were 10:1,600 rpm and 20 min,*** content of WC in TiB_(2)powder can be limited below 4.58 vol%by optimizing the milling *** sintering temperature of TiB_(2)powder milled can be decreased obviously,and the mechanical properties are evidently improved and the microstructure becomes more homogeneous when the powder of TiB_(2)becomes *** relative density,hardness,bending strength,and fracture toughness of the TiB_(2)ceramic fabricated at 1700℃reach the optimal values,which are 98.13%,19.14 GPa,756 MPa,and 5.71 MPa·m~(1/2),*** decrease of TiB_(2)particle size and the introduction of WC are the potential reasons for the improvement of TiB_(2)ceramic performance.

关键词： TiB_(2)ceramic high-speed planetary ball mill particle size WC mechanical property

来源：评论

学校读者我要写书评

暂无评论

Bioadaptable bioactive glass-β-tricalcium phosphate scaffolds with TPMS-gyroid structure by stereolithography for bone regeneration

引用

Journal of materials Science & technology 2023年第24期155卷 54-65页

作者： Meng Li Jiawei Jiang Wenbin Liu Xiaolong Huang Xiaopei Wu Wenying Wei Hao Zhu Jinyong Zhang Jun Xiao Honglian Dai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Biomedical Materials and Engineering Research Center of Hubei Province Wuhan 430070 China Department of Orthopedics Tongji Hospital Tongji Medical College Huazhong University of Science and Technology Wuhan 430030 China Department of Orthopaedics The Third Xiangya Hospital Central South University Changsha 410008 China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen Valley Foshan 528200 China

Bone defect repair remains a troubling problem in clinical orthopedics,which involves complex biological *** phosphates(CaPs)have been widely used owing to their advantage of ***,single component and traditional fabrication methods cannot meet the requirements of bioadaptability during the tissue repair *** this work,0%,5%,15%,25%wt%of BG-TCP(bioactive glass-β-tricalcium phosphate)bioresorbable scaffolds with triply-periodic minimal surfaces(TPMS)-gyroid structure were prepared by the stereolithography(SLA)***-gyroid structure provided an accurate mimicry of natural bone tissue,and the incorporation of BG improved the compressive strength ofβ-TCP matrix,matched with the defective bone(2–12 MPa).Rapid but tunable degradation kinetics(compared with pure TCP)of BG enabled the BG-TCP system to sh8ow adaptable biodegradability to new bone *** vitro studies have shown that composite scaffolds have better mechanical properties(7.82 MPa),and can released appropriate contents of calcium,phosphorous,and magnesium ions,which promoted the osteogenic differentiation of bone marrow mesenchymal stem cells(BMSCs)and angiogenic ability of endothelial progenitor cells(EPCs).Moreover,the in vivo assessment of rat femoral defect revealed that TPMS-structure-based TCP scaffolds accelerated bone ingrowth to the ***,BG-TCP scaffolds,especially 15BG-TCP group,exhibited superior bone regeneration capacity at both 4 and 8 weeks,which achieved an optimal match between the rate of material degradation and tissue *** summary,this study provides insight into influences of bioactive components(BG)and bionic structures(TPMS)on the physical-chemical properties of materials,cell behavior and tissue regeneration,which offers a promising strategy to design bioadaptive ceramic scaffolds in the clinical treatment of bone defects.

关键词： Bioactive glass Tricalcium phosphate Triply periodic minimal surfaces Stereolithography Osteogenesis

来源：评论

学校读者我要写书评

暂无评论

Tailoring lithium intercalation pathway in 2D van der Waals heterostructure for high-speed edge-contacted floating-gate transistor and artificial synapses

引用

InfoMat 2024年第10期6卷 53-64页

作者： Jun Yu Jiawei Fu Hongcheng Ruan Han Wang Yimeng Yu Jinpeng Wang Yuhui He Jinsong Wu Fuwei Zhuge Ying Ma Tianyou Zhai State Key Laboratory of Materials Processing and Die and Mould Technology School of Material Science and EngineeringHuazhong University of Science and Technology(HUST)Wuhanthe People's Republic of China Hubei Yangtze Memory Laboratory School of Integrated CircuitsHuazhong University of Science and Technology(HUST)Wuhanthe People's Republic of China School of Information Engineering Zhongnan University of Economics and LawWuhanthe People's Republic of China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Nanostructure Research CenterWuhan University of TechnologyWuhanthe People's Republic of China Optics Valley Laboratory Hubeithe People's Republic of China

Local phase transition in transition metal dichalcogenides (TMDCs) by lithiumintercalation enables the fabrication of high-quality contact interfaces in twodimensional(2D) electronic devices. However, controlling the intercalation oflithium is hitherto challenging in vertically stacked van der Waalsheterostructures (vdWHs) due to the random diffusion of lithium ions in thehetero-interface, which hinders their application for contact engineering of 2DvdWHs devices. Herein, a strategy to restrict the lithium intercalation pathwayin vdWHs is developed by using surface-permeation assisted intercalationwhile sealing all edges, based on which a high-performance edge-contact MoS_(2)vdWHs floating-gate transistor is demonstrated. Our method avoids intercalationfrom edges that are prone to be random but intentionally promotes lithiumintercalation from the top surface. The derived MoS_(2) floating-gatetransistor exhibits improved interface quality and significantly reduced subthresholdswing (SS) from >600 to 100 mV dec^(–1). In addition, ultrafast program/erase performance together with well-distinguished 32 memory statesare demonstrated, making it a promising candidate for low-power artificialsynapses. The study on controlling the lithium intercalation pathways in 2DvdWHs offers a viable route toward high-performance 2D electronics for memoryand neuromorphic computing purposes.

关键词： 2D vdW heterostructure high-speed floating-gate transistor interlayer lithium intercalation engineering phase-engineered contact

来源：评论

学校读者我要写书评

暂无评论

Facet Regulation of Fe_(2)O_(3) via Nanoarray Architecture to Enable High Faradic Efficiency for Electrocatalytic Nitrogen Fixation

引用

Journal of Wuhan University of technology(materials Science) 2022年第5期37卷 807-814页

作者： XIE Angi XIAO Liang QIAO Qiumin LIU Jinping School of Chemistry Chemical Engineering and Life ScienceWuhan University of TechnologyWuhan430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China

We propose a facile facet regulation enabled by nanoarray architecture to achieve a high faradic efficiency of Fe_(2)O_(3) catalyst for NRR. The a-Fe_(2)O_(3) nanorod arrays (NAs) were directly grown on carbon cloth (CC) with specific (104) facet exposure. The highly exposed (104) facets provide abundant unsaturated Fe atoms with dangling bonds as nitrogen reduction reaction catalytically active sites. In addition, the NAs architecture enables the enhanced electrochemical surface area (ECSA) to fully manifest the active sites and maintain the mass diffusion. Thus, the selectively exposed (104) facets coupled with the high ECSA of NAs architecture achieve a high FE of 14.89% and a high yield rate of 17.28 μg h^(-1) cm^(-2). This work presents an effective strategy to develop highly efficient catalytic electrodes for electrochemical NRR via facet regulation and nanoarray architecture.

关键词： facet regulation Fe_(2)O_(3) nanoarray architecture nitrogen reduction reaction faradic efficiency

来源：评论

学校读者我要写书评

暂无评论

Corrigendum to“Design and fabrication of high-performance self-setting trimagnesium phosphate”[***.28(2023)348-357]

引用

Bioactive materials 2024年第7期37卷 313-314页

作者： Jiawei Liu Wen Hou Wenying Wei Jian Peng Xiaopei Wu Chenxi Lian Yanan Zhao Rong Tu Takashi Goto Honglian Dai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Biomedical Materials and Engineering Research Center of Hubei ProvinceWuhan University of TechnologyWuhan430070China Chaozhou Branch of Chemistry and Chemical Engineering Guangdong Laboratory Chaozhou521000China New Industry Creation Hatchery Center Tohoku UniversitySendai980-8579Japan

The authors regret that the supplementary Fig.S12 is *** correction does not affect any of the results and conclusions in the ***.S11 and S12 are studies on hydration kinetics and hydration products of M/P=2 and M/P=4 *** the previous uploaded version,the caption and figures of the Fig.S12 are the same as *** have corrected the error and the correct figures are as *** authors are sorry for not checking the supplementary documents carefully before publication.

关键词： hydration correction kinetics

来源：评论

学校读者我要写书评

暂无评论

Design and fabrication of high-performance injectable self-setting trimagnesium phosphate

引用

Bioactive materials 2023年第10期28卷 348-357页

作者： Jiawei Liu Wen Hou Wenying Wei Jian Peng Xiaopei Wu Chenxi Lian Yanan Zhao Rong Tu Takashi Goto Honglian Dai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Biomedical Materials and Engineering Research Center of Hubei ProvinceWuhan University of TechnologyWuhan 430070China Chaozhou Branch of Chemistry and Chemical Engineering Guangdong Laboratory Chaozhou 521000China New Industry Creation Hatchery Center Tohoku UniversitySendai 980-8579Japan

Magnesium phosphate bone cement has become a widely used orthopedic implant due to the advantages of fast-setting and high early strength. However, developing magnesium phosphate cement possessing applicable injectability, high strength, and biocompatibility simultaneously remains a significant challenge. Herein, we propose a strategy to develop high-performance bone cement and establish a trimagnesium phosphate cement (TMPC) system. The TMPC exhibits high early strength, low curing temperature, neutral pH, and excellent injectability, overcoming the critical limitations of recently studied magnesium phosphate cement. By monitoring the hydration pH value and electroconductivity, we demonstrate that the magnesium-to-phosphate ratio could manipulate the components of hydration products and their transformation by adjusting the pH of the system, which will influence the hydration speed. Further, the ratio could regulate the hydration network and the properties of TMPC. Moreover, in vitro studies show that TMPC has outstanding biocompatibility and bone-filling capacity. The facile preparation properties and these advantages of TMPC render it a potential clinical alternative to polymethylmethacrylate and calcium phosphate bone cement. This study will contribute to the rational design of high-performance bone cement.

关键词： Bone cement Trimagnesium phosphate High compressive strength Injectable Bioactive materials

来源：评论

学校读者我要写书评

暂无评论

“Coffee ring” controlment in spray prepared >19% efficiency Cs_(0.19)FA_(0.81)PbI_(2.5)Br_(0.5) perovskite solar cells

引用

Journal of Energy Chemistry 2022年第4期31卷 201-208页

作者： Xinxin Yu Jing Li Yanping Mo Tianxing Xiang Zhiliang Ku Fuzhi Huang Fei Long Yong Peng Yi-Bing Cheng State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina Wuhan University of Technology Advanced Engineering Technology Research Institute of Zhongshan City Zhongshan 528437GuangdongChina College of Materials Science and Engineering Guilin University of TechnologyGuilin 541004GuangxiChina

Achieving high-quality perovskite films with uniform morphology and homogeneous crystallinity is challenging owing to the coffee ring effect(CRE) in the spray-coating technologies. In this study, an evaporation/spray-coating two-step deposition method is used to fabricate Cs_(0.19)FA_(0.81)PbI_(2.5)Br_(0.5)light harvesters for perovskite solar cells(PSCs). Considering the solid–liquid reaction, we establish a reaction-dependent regulating strategy that inhibits CRE successfully and prepare a high-quality perovskite layer, wherein the solvent for the FAI/Br solution during the spraying process is changed from isopropanol to n-butyl alcohol(NBA). The retarded-drying-enhanced spreading of the NBA solution inhibits contact line pinning to suppress the capillary flows and increases the reaction between metal halides(CsI/PbI_(2)) and organic salts(FAI/Br), which result in a reduction in the accumulation of solutes in the periphery effectively inhibiting CRE. Consequently, we obtain a high performance Cs_(0.19)FA_(0.81)PbI_(2.5)Br_(0.5) PSC with a power conversion efficiency(PCE) of 19.17%. An enlarged perovskite film(10 × 10 cm^(2)) containing 40 sub-cells is prepared. The average PCE of these devices is 18.33 ± 0.56%, proving the reliability of the "coffee ring" regulating strategy. This study provides an effective approach for CRE controlment in spraying technology to achieve high repeatability devices with good performance.

关键词： Cs_(0.19)FA_(0.81)PbI_(2.5)Br_(0.5)perovskite solar cells Spray coating Coffee ring effect Reaction-dependent regulating strategy

来源：评论

学校读者我要写书评

暂无评论

Valorization of spent lithium-ion battery cathode materials for energy conversion reactions

引用

Green Energy and Environment 2025年

作者： Zhang, Jin Chen, Ding Jiao, Jixiang Zeng, Weihao Mu, Shichun State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China

With large-scale commercial applications of lithium-ion batteries (LIBs), lots of spent LIBs will be produced and cause huge waste of resources and greatly increased environmental problems. Thus, recycling spent LIB materials is inevitable. Due to high added-value features, converting spent LIB cathode materials into catalysts exhibits broad application prospects. Inspired by this, we review the high-added-value reutilization of spent LIB materials toward catalysts of energy conversion. First, the failure mechanism of spent LIB cathode materials are discussed, and then the transformation and modification strategies are summarized and analyzed to improve the transformation efficiency of failed cathode materials and the catalytic performance of catalysts, respectively. Moreover, the electrochemical applications of failed cathode material derived catalysts are introduced, and the key problems and countermeasures are analyzed and proposed. Finally, the future development trend and prospect of high-added-value reutilization for spent LIB cathode materials toward catalysts are also given. This review will predictably advance the awareness of valorizing spent lithium-ion battery cathode materials for catalysis. © 2024 Institute of Process Engineering, Chinese Academy of Sciences

关键词： Lithium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Scalable fabrication of graphene-assembled multifunctional electrode with efficient electrochemical detection of dopamine and glucose

引用

Nano Research 2023年第5期16卷 6361-6368页

作者： Xiaodong Ji Xin Zhao Zixin Zhang Yunfa Si Wei Qian Huaqiang Fu Zibo Chen Zhe Wang Huihui Jin Zhugen Yang Daping He State Key Laboratory of Silicate Materials for Architectures Wuhan University of TechnologyWuhan 430070China Hubei Engineering Research Center of RF-Microwave Technology and Application Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Information Engineering Wuhan University of TechnologyWuhan 430070China School of Water Energy and EnvironmentCranfield UniversityMilton KeynesMK430ALUK

Conventional glassy carbon electrodes(GCE)cannot meet the requirements of future electrodes for wider use due to low conductivity,high cost,non-portability,lack of ***,cost-effective and wearable electrode enabling rapid and versatile molecule detection is becoming important,especially with the ever-increasing demand for health monitoring and point-ofcare *** is considered as an ideal electrode due to its excellent physicochemical ***,we prepare graphene film with ultra-high conductivity and customize the 3-electrode system via a facile and highly controllable laser engraving *** from the ultra-high conductivity(5.65×10^(5)S·m^(−1)),the 3-electrode system can be used as multifunctional electrode for direct detection of dopamine(DA)and enzyme-based detection of glucose without further metal *** dynamic ranges from 1–200μM to 0.5–8.0 mM were observed for DA and glucose,respectively,with a limit of detection(LOD)of 0.6μM and 0.41 ***,the excellent target detection capability caused by the ultra-high conductivity and ease modification of graphene films,together with their superb mechanical properties and ease of mass-produced,provides clear potential not only for replacing GCE for various electrochemical studies but also for the development of portable and highperformance electrochemical wearable medical devices.

关键词： graphene film ultra-high conductivity multifunctional electrode point-of-care diagnosis wearable medical devices

来源：评论

学校读者我要写书评

暂无评论

Enhanced Microwave Absorption for High Filler Content Composite Molded from Polymer Coated Flaky Carbonyl Irons Modified by Silane Coupling Agents

引用

Journal of Wuhan University of technology(materials Science) 2023年第1期38卷 42-51页

作者：崔正明 MA Guoqing WANG Mengqi LUO Chuangyu CHEN Zhihong MA Huiru LI Qifan 李维 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China School of Science Wuhan University of TechnologyWuhan 430070China Department of Chemistry School of ChemistryChemical Engineering and Life ScienceWuhan University of TechnologyWuhan 430070China School of Physics and Electronic Science Hubei UniversityWuhan 430062China

A microwave absorbing sheet with a high complex permeability and a relatively low complex permittivity is obtained by molding of the densely coated flaky carbonyl iron particles(FCIPs)by styrenebutadiene-styrene block copolymer(SBS)in the assistance of coupling agent *** molding of the core-shell FCIPs without adding extra binder results in a large permeability due to the high filling ratio(55vol%)of ***,the permittivity is well suppressed by the dense insulate polymer shell on the FCIPs,avoiding the severe impedance mismatch problem of the high filler content microwave absorbing *** show that modifying the surface of FCIPs by proper amount of silane coupling agent is critical for the coating quality of the SBS shell,which is verified by resistivity and corrosion current density measurements,and can be interpreted by improved interfacial compatibility between the modified FCIPs and *** obtained microwave absorbing sheet shows a minimum reflection loss of-38.74 dB at 1.57 GHz and has an effective absorption bandwidth from 1.1 to 2.3 GHz at a relatively small thickness of 2 mm.

关键词： microwave absorber coating quality magnetic permeability permittivity low frequency

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：