检索结果-内蒙古大学图书馆

SSRN 2023年

作者： Chen, Xiao Geng, Cong Yu, Xinxin Feng, Yishuai Liang, Cheng Peng, Yong Cheng, Yibing State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei Wuhan430070 China

Spray coating is an emerging technique, paving the way for the commercialization of perovskite. However, it still faces challenges in the preparation of wide-bandgap (WBG) perovskite solar cells (PSCs) for tandem photovoltaic devices. Applying a two-step evaporate-spray method, and an additive engineering strategy, where n-propylammonium chloride is introduced in spray processing, we fabricate efficient and stable methylammonium-free (MA-free) WBG PSCs. The propylammonium cation plays a role in passivating grain boundaries, which resulted in the reduction of vacancy defects on the surface of films. Cl- plays a big part in the crystal growth process. After the addition of PACl, preferred crystalline orientation, larger grain size, and reduced trap density in perovskite films are obtained. Finally, the champion WBG PSC (Energy gap (Eg), Eg≈1.68 eV) delivers a power conversion efficiency (PCE) over 19%, which is the highest efficiency of the WBG PSCs prepared by the evaporate-spray method, as compared to pristine devices with the highest PCE of 16.59%. Additionally, the barrier against moisture formed at the surface of films significantly enhances humidity stability of the photovoltaic (PV) device. © 2023, The Authors. All rights reserved.

关键词： Additives

来源：评论

学校读者我要写书评

暂无评论

Three dimensional porous frameworks for lithium dendrite suppression

引用

Journal of Energy Chemistry 2020年第5期29卷 73-89页

作者： Shuyan Ni Shuangshuang Tan Qinyou An Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina

Lithium metal is a promising anode material owing to its very low electrochemical potential and ultrahigh specific ***,the growth of lithium dendrites could result in a short lifespan,low coulombic efficiency,and potential safety hazards during the progress of lithium plating/*** factors drastically hinder its application in lithium metal *** review focuses on the use of three dimensional(3D)porous host frameworks to improve Li plating/stripping behaviors,accommodate the change in volume,and suppress or block lithium dendrite *** 3D porous frameworks,including the conductive carbon-based,metal-based,and lithiophilic inorganic-compound frameworks are introduced and summarized in *** particular functions,relative developments,and optimized strategies of various 3D porous frameworks for lithium deposition/dissolution behaviors are ***,the challenges and promising developments in the field of Li metal anodes will be discussed at the end of this review.

关键词： Lithium metal battery 3D porous frameworks Lithium dendrite Lithium sulfur batteries Lithium oxygen batteries Li plating/stripping

来源：评论

学校读者我要写书评

暂无评论

Operating conditions combination analysis method of optimal water management state for PEM fuel cell

引用

Green Energy and Intelligent Transportation 2023年第4期2卷 28-42页

作者： Wenxin Wan Yang Yang Yang Li Changjun Xie Jie Song Zhanfeng Deng Jinting Tan Ruiming Zhang School of Automation Wuhan University of TechnologyWuhan430070China Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of TechnologyWuhan430070China Department of Electrical Engineering Chalmers University of TechnologyGothenburg41258Sweden Modern Industry College of Artificial Intelligence and New Energy Vehicles Wuhan University of TechnologyWuhan430070China Global Energy Interconnection Research Institute Beijing102211China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China Guangdong Hydrogen Energy Institute of Wuhan University of Technology Foshan528000China

The water content of proton exchange membrane fuel cells(PEMFCs)affects the transport of reactants and the conductivity of the *** water management measures can improve the performance and extend the lifespan of the fuel *** water management state of the stack is influenced by various external operating conditions,and optimizing the combination of these conditions can improve the water management state within the *** that the stack's internal resistance can reflect its water management state,this study first establishes an internal resistance-operating condition model that considers the coupling effect of temperature and humidity to determine the variation trend of total resistance and stack humidity with single-factor operating ***,the water management state optimization method based on the ANN-HGPSO algorithm is proposed,which not only quantitatively evaluates the influence weights of different operating conditions on the stack's internal resistance but also efficiently and accurately obtains the optimal combination of five operating conditions:working temperature,anode gas pressure,cathode gas pressure,anode gas humidity,and cathode gas humidity to achieve the optimal water management state in the stack,within the entire range of current ***,the response surface experimental results of the stack also validate the effectiveness and accuracy of the ANN-HGPSO *** method mentioned in this article can provide effective strategies for efficient water management and output performance optimization control of PEMFC stacks.

关键词： PEMFC Water management statue Internal resistance-operating condition model Operating condition optimization Response surface method

来源：评论

学校读者我要写书评

暂无评论

Two-dimensional gersiloxenes with tunable band gap as new photocatalysts

引用

Rare Metals 2020年第6期39卷 610-612页

作者： Shao-Wen Cao State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Designing highly efficient and stable photocatalysts is of vital importance for solar-to-fuel conversion,as a potential strategy to address the concerns of global energy crisis and environmental *** development of novel photocatalytic materials is desirable to overcome those shortcomings of traditional semiconductor photocatalysts.

关键词： catalysts overcome shortcomings

来源：评论

学校读者我要写书评

暂无评论

Boosting the electrochemical performance and reliability of conducting polyme microelectrode via intermediate graphene for on-chip asymmetric micro-supercapacitor

引用

Journal of Energy Chemistry 2020年第10期29卷 224-232页

作者： Muhammad Tahir Liang He Wei Yang Xufeng Hong Waqas Ali Haider Hui Tang Zhe Zhu Kwadwo Asare Owusu Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina

High-performance anode is hurdle for on-chip planar microsupercapacitor(MSC).Polypyrrole(PPy)is a highly attractive pseudocapacitive material,but its low cycling stability,and low adhesion with current collector hinder its *** we propose one-prong generic strategy to boost the cycling stability of *** our strategy,the electrochemical deposition of multilayered reduced graphene oxide(rGO)on micropatterned Au is utilized,and the resultant rGO@Au pattern is then used for growing highly porous PPy nanostructures by facile electrochemical *** fabricated PPy anode on rGO@Au has quasi rectangular cyclic voltammetry curves up to-0.7 V and exceptional cycling stability,retaining82%of capacitance after 10,000 charge/discharge cycles in 2 M KCl *** outstanding reliability of PPy on rGO@Au is due to the flexibility of rGO,accommodating structural pulverization and providing a promising background for the nucleation of highly porous ***,an all-polymer based asymmetric aqueous MSC(AMSC)is constructed with PPy anode and PEDOT cathode,which exhibited excellent electrochemical performance compared with conventional symmetric MSCs based on conducting *** constructed AMSC delivered a maximum areal capacitance of 15.9 m F cm^-2(99.3 F cm^-3),high specific energy and power densities of 4.3μWh cm^-2(27.03 mWh cm^-3)and 0.36 W cm^-2(0.68 W cm^-3)at 1.4 V,*** enhanced electrochemical performances can be illustrated by nucleation mechanism,in which surface topology of r GO generates a promising background for nucleation and electrochemical growth of nanoporous pseudocapacitive conducting polymers with superior interfacial contact and improved surface area.

关键词： Electrochemical polymerization Nucleation Asymmetric microsupercapacitors

来源：评论

学校读者我要写书评

暂无评论

Enhanced high-temperature energy storage density in P-type NiOx quantum dots and P(VDF-HFP) composite dielectrics

引用

Composites Science and technology 2025年 269卷

作者： Fang, Cheng Zhang, Ziyi Wang, Jian Ye, Zhanwen Li, Kaiyuan Wu, Luoqi Feng, Xiaobin Duan, Bo Dong, Lijie Zhou, Ling Shen, Zhonghui Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics School of Physics and Mechanics Wuhan University of Technology Wuhan430070 China Center for Smart Materials and Devices State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei Wuhan430070 China

The harsh application environment poses higher requirements for the operating temperature of dielectric energy storage capacitors. Suppressing carrier transport at high temperatures is a key method to increase the breakdown field strength (Eb) and the operating temperature of dielectrics. In this paper, low-concentration P-type semiconductor nickel oxide quantum dots (NiOx QDs) were surface modified with polydopamine (PDA) and introduced into the polymer matrix, with the aim to capture hot carriers by constructing hole traps, thereby increasing the high-temperature Eb and energy storage density (Udis) of the polymer. The results confirmed the efficiency of the strategy. At 90 °C, the Eb of the NiOx@PDA/P(VDF-HFP) film reached 2242.78 kV/cm, and the Udis reached 2.94 J/cm3, which were 42.41 % and 164.86 % higher than those of the pure P(VDF-HFP) film. Thermal and mechanical analyses indicated that the enhanced Eb and Udis were mainly attributed to the restriction of the Poole-Frenkel emission within the dielectrics. Together with the enhanced compatibility of the organic-inorganic composite interface, the macro defects of the composites were further suppressed and electrical properties were further increased. This work offers a straightforward and efficient approach for manufacturing high-temperature energy storage dielectrics. © 2025 Elsevier Ltd

关键词： Carrier transport

来源：评论

学校读者我要写书评

暂无评论

Awakening the oxygen evolution activity of MoS_(2) by oxophilic-metal induced surface reorganization engineering

引用

Journal of Energy Chemistry 2021年第11期30卷 546-551,I0013页

作者： Xueqin Mu Yang Zhu Xiangyao Gu Shipeng Dai Qixin Mao Lintao Bao Wenxuan Li Suli Liu Jianchun Bao Shichun Mu Jiangsu Key Laboratory of Biofunctional Materials School of Chemistry and Materials ScienceNanjing Normal UniversityNanjing 210023JiangsuChina Key Laboratory of Advanced Functional Materials of Nanjing Nanjing Xiaozhuang UniversityNanjing 211171JiangsuChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu hydrogen ValleyFoshan 528200GuangdongChina

Although molybdenum disulfide (MoS_(2))-based materials are generally known as active electrocatalysts for the hydrogen evolution reaction (HER), the inert performance for the oxygen evolution reaction (OER) seriously limits their wide applications in alkaline electrolyzers due to there exists too strong metal-sulfur (M−S) bond in MoS_(2). Herein, by means of surface reorganization engineering of bimetal Al, Co-doped MoS_(2) (devoted as AlCo_(3)-MoS_(2)) through in situ substituting partial oxidation, we successfully significantly activate the OER activity of MoS_(2), which affords a considerably low overpotential of 323 mV at −30 mA cm^(−2), far lower than those of MoS_(2), Al-MoS_(2) and Co-MoS_(2) catalysts. Essentially, the AlCo_(3)-MoS_(2) substrate produces lots of M−O (M=Al, Co and Mo) species with oxygen vacancies, which trigger the surface self-reconstruction of pre-catalysts and simultaneously boost the electrocatalytic OER activity. Moreover, benefiting from the moderate M−O species formed on the surface, the redistribution of surface electron states is induced, thus optimizing the adsorption of OH* and OOH* intermediates on metal oxyhydroxides and awakening the OER activity of MoS_(2).

关键词： Surface reorganization engineering Porous nanosheets Oxygen evolution reaction MoS_(2) Oxophilic-metal

来源：评论

学校读者我要写书评

暂无评论

Microstructure and tribological properties of -oriented 3C-SiC by chemical vapor deposition

引用

Ceramics International 2025年

作者： Yang, Wenxuan Huang, Wei Li, Cuicui Wang, Chongjie Zhang, Chitengfei Tu, Rong Zhang, Song Hubei Longzhong Laboratory No.101 Luming Road Xiangyang441000 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Hubei Technology Innovation Center for Advanced Composites Wuhan430070 China

Highly -oriented 3C-SiC coatings were fabricated by chemical vapor deposition method at different temperatures. As deposition temperature increased from 1473 K to 1773 K, the surface structure of -oriented 3C-SiC transitioned from hexagonal structure with sixfold symmetry to hill-like structure, and finally to conical porous surface composed of stacked short rods. Owing to alteration of surface structure, the hardness of 3C-SiC coatings presented a trend of initially increasing and subsequently decreasing. The 3C-SiC coating deposited at 1673 K possessed the highest hardness, with a value of 42.08 GPa. The average friction coefficient for 3C-SiC/Si3N4 pair ranged from 0.258 to 0.569. The wear rate and hardness exhibited opposite trends. Compared with 3C-SiC coatings prepared at the other three temperatures, the 3C-SiC coating deposited at 1573 K exhibited the lowest wear rate under loads of 5 N, 10 N, and 15 N. Furthermore, the lowest wear rate, recorded at 15 N, was 4.1 × 10−6 mm3/Nm, attributed to high hardness and uniform grain size. The wear mechanism of -oriented 3C-SiC coatings during dry sliding primarily involved fracture, leading to fatigue and third-body wear. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Rockwell hardness

来源：评论

学校读者我要写书评

暂无评论

Molecular origin for toughness of hydrogel artificial spider silk for surgical sutures

引用

Science China Chemistry 2025年

作者： Jiatian Li Abdul Qadeer Khan Weiqiang Zhao Zhipeng Lai Qiankun Bao Muhammad Rafique Fazhi Ye Jie Bai Qiang Zhou Liqiang Mai Zongqian Wang Enzhao Liu Xiang Zhou Zunfeng Liu Chemical Engineering College Inner Mongolia University of Technology Tianjin Key Laboratory of Ionic-Molecular Function of Cardiovascular Disease Department of Cardiology Tianjin Institute of CardiologyThe Second Hospital of Tianjin Medical University State Key Laboratory of Medicinal Chemical Biology Key Laboratory of Functional Polymer Materials Tianjin Key Laboratory of Functional Polymer Materials College of Chemistry Nankai University School of Biomedical Engineering and Med-X Research Institute Shanghai Jiao Tong University State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Tianjin First Central Hospital School of Textile and Garment Anhui Polytechnic University Department of Science School of Traditional Chinese Pharmacy China Pharmaceutical University

The pursuit of biomimetic fibers with simultaneous high toughness and strength persists, despite their inherent ***, for artificial spider silk based on gel fiber, it is still unclear for the molecular chain attributes related to the improvement of the strength and toughness. Here, a hydrogel fiber was prepared by mimicking the molecular structure of natural spider silk, and we delved into the molecular chain structure characteristics related to the strength, toughness and damping capacity of gel fiber, such as crosslinking density, molecular chain orientation and hydrogen bond interaction. The results indicate that a certain increase in crosslinking density and molecular chain orientation contributes to the enhancement of tensile strength, while the toughness and damping remain essentially unaltered. The thermal dissociation of hydrogen bond could enhance the toughness in a specific range, while the humidity destruction of hydrogen bond would reduce the *** well-regulation control of the weight ratio of polyacrylamide （PAM） to poly（acrylic acid）(PAA), the PAM@PAA gel fibers could reach maximum breaking strength of 1.02 GPa, maximum toughness of 149 MJ m-3, and damping capacity of 95%.PAM@PAA gel fiber has demonstrated excellent wound healing performance and biocompatibility in vivo evaluation as a surgical suture, which indicates its potential in biomedical applications.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Flexible and highly-sensitive pressure sensor based on controllably oxidized MXene

引用

InfoMat 2022年第9期4卷 60-71页

作者： Yanan Ma Yongfa Cheng Jian Wang Si Fu Mengjun Zhou Yue Yang Baowen Li Xin Zhang Ce-Wen Nan State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Center of Smart Materials and Devices&International School of Materials Science and EngineeringWuhan University of TechnologyWuhanChina School of Mathematics Physics and Optoelectronic EngineeringHubei University of Automotive TechnologyShiyanChina Center for Nanoscale Characterization&Devices(CNCD) Wuhan National Laboratory for Optoelectronics(WNLO)Huazhong University of Science and Technology(HUST)WuhanChina Information Materials and Intelligent Sensing Laboratory of Anhui Province Key Laboratory of Structure and Functional Regulation of Hybrid Materials of Ministry of EducationInstitutes of Physical Science and Information TechnologyAnhui UniversityHefeiChina State Key Lab of New Ceramics and Fine Processing School of Materials Science and EngineeringTsinghua UniversityBeijingChina

Conductive Ti_(3)C_(2)T_(x)MXenes have been widely investigated for the construction of flexible and highly-sensitive pressure *** the inevitable oxidation of solution-processed MXene has been recognized,the effect of the irreversible oxidation of MXene on its electrical conductivity and sensing properties is yet to be ***,we construct a highly-sensitive and degradable piezoresistive pressure sensor by coating Ti_(3)C_(2)T_(x)MXene flakes with different degrees of in situ oxidation onto paper substrates using the dipping-drying *** situ oxidation can tune the intrinsic resistance and expand the interlayer distance of MXene *** partially oxidized MXene-based piezoresistive pressure sensor exhibits a high sensitivity of 28.43 kPa^(-1),which is greater than those of pristine MXene,over-oxidized MXene,and state-of-the-art paper-based pressure ***,these sensors exhibit a short response time of 98.3 ms,good durability over 5000 measurement cycles,and a low force detection limit of 0.8 ***,MXene-based sensing elements are easily degraded and environmentally *** MXene-based pressure sensor shows promise for practical applications in tracking body movements,sports coaching,remote health monitoring,and human–computer interactions.

关键词： adjustable sensitivity in situ oxidation interlayer distance MXene pressure sensor

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：