检索结果-内蒙古大学图书馆

Refined platelet size: Unlocking enhanced mechanics in nacre-mimetic mineralized materials

Nano Today 2025年 62卷

作者： Chen, Wei Ma, Yuanyuan Xu, Shiqing Wang, Yang Zhang, Pengchao Meng, Jingxin Fu, Zhengyi Wang, Shutao CAS Key Laboratory of Bio-inspired Materials and Interfacial Science Technical Institute of Physics and Chemistry Chinese Academy of Sciences Beijing100190 China Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China University of Chinese Academy of Sciences Beijing100049 China

Nacre-mimetic mineralized (NMM) materials with outstanding mechanical properties have been considered as future structural materials. However, replicating nacre's characteristics into artificial ones in mild conditions has been challenging, particularly in controlling the platelet size, which is crucial for mechanical performance. Here, inspired by mollusk biomineralization, we achieve the unprecedented regulation of aragonite platelet sizes (ranging from 76 to 5800 μm2) at the micrometer scale by manipulating amorphous nano calcium carbonate content, thereby enhancing the mechanical properties of NMM materials. Experimental and simulation results demonstrate that merely decreasing the aragonite platelets' sizes can significantly increase the flexural strength and modulus by 2.8 and 9.9 times, respectively. Notably, the proposed strategy not only has the potential for large-scale production but also produces refined NMM material that closely resembles natural nacre in terms of microstructure and mechanical properties, showing ca. 26 % improvement in specific strength over previously reported NMM materials. Consequently, this work provides a feasible way for developing advanced biomimetic structural materials with specific functions, such as protective gear and artificial bone grafts. © 2025 Elsevier Ltd

关键词： Biomimetic mineralization Mechanical property Nacre-mimetic materials Platelet size

来源：评论

学校读者我要写书评

暂无评论

Ammonium Ion and Structural Water Co-Assisted Zn^(2+) Intercalation/De-Intercalation in NH_(4)V_(4)O_(10)∙0.28H_(2)O

引用

Chinese Journal of Chemistry 2021年第7期39卷 1885-1890页

作者： Ting Zhu Bo Mai Ping Hu Ziang Liu Congcong Cai Xuanpeng Wang Liang Zhou State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhanHubei430070 China Department of Physical Science&Technology School of ScienceWuhan University of TechnologyWuhanHubei430070 China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshanGuangdong528200 China

Main observation and conclusion The cathode material plays a crucial role in the performances of aqueous zinc-ion batteries(ZIBs).Herein,we report an ammonium vanadate(NH_(4)V_(4)O_(10)∙0.28H_(2)O,NHVO)aqueous ZIB cat... 详细信息

关键词： Aqueous zinc-ion battery Cathode material Vanadates Zincates Electrochemistry

来源：评论

学校读者我要写书评

暂无评论

Maximum Power Point Tracking Using a Multimode Hunter-Prey Optimization Algorithm for Gradually Varying Power in Centralized Thermoelectric Generation System

引用

Energy technology 2025年第0期

作者： Zhu, Wenchao Li, Peng Yang, Wenlong Xie, Changjun Li, Hao Yang, Yang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan430070 China School of Automation Wuhan University of Technology Wuhan430070 China Wuhan Industrial Technology Institute of Artificial Intelligence and New Energy Vehicles Wuhan430119 China Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of Technology Wuhan430070 China

The unstructured power outputs from thermoelectric generator (TEG) systems have precipitated the advancement of maximum power point tracking (MPPT) methods toward more intelligent solutions. This article concentrates on centralized TEG systems which work during nonuniform distribution of temperature cases and introduce the hunter-prey optimization algorithm with multimode updating (MMUHPO). Existing MPPT methods based on metaheuristic algorithms pay attention to improving tracking speed, efficiency, oscillation, and call frequency. However, in scenarios marked by gradual changes in power characteristics, the precision of MPPT algorithms can lead to frequent oscillatory searches and elevated computational demands. MMUHPO reduces power loss and simplifies algorithm complexity by improving the original mechanism and introducing termination mechanism and multimode update mechanism. Herein, the proposed algorithm is compared with several widely used MPPT algorithms based on metaheuristic algorithms under five different operating conditions. Remarkably, the MMUHPO algorithm demonstrates a substantial enhancement in energy collection efficiency, with the increase in efficiency reaching up to 109.8%. Finally, real-time data simulation experiments corroborate the exceptional tracking performance of the proposed algorithm. © 2025 Wiley-VCH GmbH.

关键词： Heuristic algorithms

来源：评论

学校读者我要写书评

暂无评论

Crystallization Modulation and Holistic Passivation Enables Efficient Two‑Terminal Perovskite/CuIn(Ga)Se_(2)Tandem Solar Cells

引用

Nano-Micro Letters 2025年第1期17卷 205-215页

作者： Cong Geng Kuanxiang Zhang Changhua Wang Chung Hsien Wu Jiwen Jiang Fei Long Liyuan Han Qifeng Han Yi‑Bing Cheng Yong Peng State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070People’s Republic of China Triumph Photovoltaic Materials Co. Ltd.No.1001 Yannan AvenueHigh‑Tech Development DistrictBengbuAnhui 233000People’s Republic of China College of Materials Science and Engineering Guilin University of TechnologyGuilin 541004People’s Republic of China State Key Laboratory of Metal Matrix Composites Shanghai Jiao Tong UniversityShanghai 200240People’s Republic of China

Two-terminal(2-T)perovskite(PVK)/CuIn(Ga)Se_(2)(CIGS)tandem solar cells(TSCs)have been considered as an ideal tandem cell because of their best bandgap matching regarding to Shockley–Queisser(S–Q)***,the nature of the irregular rough morphology of commercial CIGS prevents people from improving tandem device *** this paper,D-homoserine lactone hydrochloride is proven to improve coverage of PVK materials on irregular rough CIGS surfaces and also passivate bulk defects by modulating the growth of PVK *** addition,the minority carriers near the PVK/C60 interface and the incompletely passivated trap states caused interface recombination.A surface reconstruction with 2-thiopheneethylammonium iodide and N,N-dimethylformamide assisted passivates the defect sites located at the surface and grain ***,LiF is used to create this field effect,repelling hole carriers away from the PVK and C60 interface and thus reducing *** a result,a 2-T PVK/CIGS tandem yielded a power conversion efficiency of 24.6%(0.16 cm^(2)),one of the highest results for 2-T PVK/CIGS TSCs to our *** validation underscores the potential of our methodology in achieving superior performance in PVK/CIGS tandem solar cells.

关键词： PVK/CIGS TSCs Irregular rough surfaces Modulating the growth PVK/C60 interface recombination

来源：评论

学校读者我要写书评

暂无评论

Electrolyte Engineering Toward High-Voltage Aqueous Energy Storage Devices

引用

Energy & Environmental materials 2021年第3期4卷 302-306页

作者： Jianfeng Tan Jinping Liu School of Chemistry Chemical Engineering and Life Science and State Key Laboratory of Advanced Technology for Materials Synthesis and ProcessingWuhan University of TechnologyWuhan 430070China State Center for International Cooperation on Designer Low-carbon&Environmental Materials and School of Materials Science and Engineering Zhengzhou UniversityZhengzhou 450001China

Aqueous electrochemical energy storage(EES)devices are highly safe,environmentally benign,and inexpensive,but their operating voltage and energy density must be increased if they are to efficiently power multifunctional electronics,new-energy cars as well as to be used in smart *** Minireview summarizes the key breakthroughs and progress in expanding the electrochemical stability window(ESW)of aqueous EES devices over the past five *** briefly introducing the electrode engineering ways to widen ESW,we focus on four ground-breaking electrolyte engineering strategies and classify them into two kinds from the perspective of salts and exotic solutes/*** widening degree toward ESW of these emerging electrolytes is compared and the universal fundamental mechanism relating to the interactions between limited water molecules and high-concentration salts(or large amounts of exotic solutes/solvents)is *** challenges and perspectives for high-ESW electrolytes as well as recent advances in low-cost and other metal ion(sodium,potassium,zinc,etc.)-based electrolytes for expanding ESW are also outlined.

关键词： aqueous energy storage systems electrolyte engineering high voltage high-energy density water electrolysis

来源：评论

学校读者我要写书评

暂无评论

Influence of pore size optimization in catalyst layer on the mechanism of oxygen transport resistance in PEMFCs

引用

Progress in Natural Science:materials International 2020年第6期30卷 839-845页

作者： Shumeng Guan Fen Zhou Jinting Tan Mu Pan State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei Provincial Key Laboratory of Fuel Cells Wuhan University of Technology

In PEMFC, the oxygen transport resistance severely hinders the cell from achieving high performance. In this paper, pore-forming agent was used to optimize the pore size distribution of the catalyst layer(CL), and to study its effect on the mechanism of oxygen transport resistance, including molecular diffusion resistance, Knudsen diffusion resistance, and local O2resistance in CL. The results showed that with the pore formation the cell performance had a significant improvement at high current density, mainly due to its better oxygen transport properties, especially under low platinum conditions. The addition of pore-forming agent moved the pore diameter toward a larger pore diameter with a range from 70 to 100 nm, and also obtaining a higher cumulative pore volume. It was found that the increase of the cumulative pore volume and larger pore size were conducive to the diffusion of oxygen molecules in CL, and the resistance caused by which was the dominant part in total transport resistance. Further tests indicated that the improvement of molecular diffusion resistance was much larger than that of Knudsen diffusion resistance in the catalyst layer after pore formed. In addition, the optimized pore structure will also get a higher number of effective pores, which resulted in an increased effective area of the ionomer on the Pt surface. The higher effective area of the ionomer was particularly beneficial for the reduction of local O2resistance with low Pt loading.

关键词： Pore size optimization Pore-forming agent Oxygen transport resistance PEMFC

来源：评论

学校读者我要写书评

暂无评论

Structural Evolution and Thermoelectric Performance in (Gete)M(Sb2te3)N Compounds

SSRN

引用

SSRN 2024年

作者： Chen, Shuo Liu, Keke Luo, Tingting Liao, Lin Yang, Zhen Zhong, Shenlong Wu, Jinsong Su, Xianli Poudeu, Pierre Ferdinand Poudeu Zhang, Qingjie Tang, Xinfeng State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Department of Materials Science and Engineering University of Michigan Ann ArborMI48109 United States

Exploring the relationship between crystal structure and thermoelectric performance is a pivotal topic in the thermoelectric field. In this study, we have conducted a comprehensive investigation on the correlation between the structural evolution of (GeTe)m(Sb2Te3)n pseudo-binary system and the thermoelectric properties. The proportion of van der Waals bonds increase with the rising Sb2Te3 content, resulting in an increase in the anisotropy of the electrical conductivity and a decrease in the average sound velocity. Additionally, the cation sites in the crystal lattice of these compounds exhibit a mixed occupancy of Ge/Sb atoms, although the cation sites adjacent to the van der Waals gaps are predominantly occupied by Sb atoms. The ultra-low lattice thermal conductivity of the GST124 and GST147 compounds is mainly attributed to the high concentration of van der Waals bonds and enhanced phonon scattering arising from Ge/Sb mixed cation occupancy and high density of defect structures. The high electrical conductivity combined with the low lattice thermal conductivity enables GST124 and GST147 compounds to achieve a maximum ZT value of 0.56 and 0.57, respectively. Higher thermoelectric performance can be achieved through optimization of the microstructure as well as the carrier concentration. © 2024, The Authors. All rights reserved.

关键词： Anisotropy

来源：评论

学校读者我要写书评

暂无评论

Regulation of Dynamic Recrystallization in p-Type Bi2Te3-Based Compounds Leads to High Thermoelectric Performance and Robust Mechanical Properties

SSRN

引用

SSRN 2024年

作者： Chen, Shuo Luo, Tingting Yang, Zhen Zhong, Shenlong Su, Xianli Yan, Yonggao Wu, Jinsong Poudeu, Pierre Ferdinand Poudeu Zhang, Qingjie Tang, Xinfeng State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Department of Materials Science and Engineering University of Michigan Ann ArborMI48109 United States

Bi2Te3-based bulk materials are the best commercially available thermoelectric materials for near room temperature applications. However, the poor mechanical properties of zone melting material and inferior thermoelectric performance of powder metallurgical material restrict their large scale deployment. In this study, p-type Bi₂Te₃-based materials were prepared using the hot extrusion technique, and the underlying mechanisms for microstructure evolution were revealed. The hot extrusion speed significantly impacts the strain rate, an indicator to modulate the dynamic recrystallization (DRX) and grain growth, thereby effectively regulating the microstructures of samples. For the sample extruded at a speed of 1.0 mm min-1, the refined grain with an average grain size of 1.53 μm and an orientation factor F(110) of 0.28 is achieved. This highly textured structure and high-density low-angle boundaries (LAGBs) maintain the high carrier mobility of 264 cm2 V-1 s-1, comparable with the zone melting sample. In contrast, increasing grain boundaries, dislocations, and inherent point defects intensifies the phonon scattering and suppresses the lattice thermal conductivity to 0.73 W m-1 K-1. All these contribute to a practical high ZT value of 1.1 at room temperature. Moreover, the fine grains and high-density dislocations ensure robust mechanic properties with a compressive strength of 189 MPa and a bending strength of 139 MPa, which is a guarantee for the successful cutting of microparticles with dimensions of 100 × 100 × 200 μm3. The fabrication of high-quality materials with both high thermoelectric performance and strong mechanical properties paves the way for the miniaturization of thermoelectric modules. © 2024, The Authors. All rights reserved.

关键词： Textures

来源：评论

学校读者我要写书评

暂无评论

Articular cartilage and osteochondral tissue engineering techniques:Recent advances and challenges

引用

Bioactive materials 2021年第12期6卷 4830-4855页

作者： Wenying Wei Honglian Dai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Biomedical Materials and Engineering Research Center of Hubei ProvinceWuhan University of TechnologyWuhan430070China International School of Materials Science and Engineering Wuhan University of TechnologyWuhan430070China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan528200China

In spite of the considerable achievements in the field of regenerative medicine in the past several decades,osteochondral defect regeneration remains a challenging issue among diseases in the musculoskeletal system because of the spatial complexity of osteochondral units in composition,structure and *** order to repair the hierarchical tissue involving different layers of articular cartilage,cartilage-bone interface and subchondral bone,traditional clinical treatments including palliative and reparative methods have showed certain improvement in pain relief and defect *** is the development of tissue engineering that has provided more promising results in regenerating neo-tissues with comparable compositional,structural and functional characteristics to the native osteochondral *** in this review,some basic knowledge of the osteochondral units including the anatomical structure and composition,the defect classification and clinical treatments will be first *** we will highlight the recent progress in osteochondral tissue engineering from perspectives of scaffold design,cell encapsulation and signaling factor incorporation including bioreactor *** products for osteochondral defect repair will be analyzed and summarized ***,we will discuss the current obstacles and future directions to regenerate the damaged osteochondral tissues.

关键词： Osteochondral tissue engineering Cartilage tissue engineering Gradient scaffold Bioreactors

来源：评论

学校读者我要写书评

暂无评论

通过表面终止化学设计实现高度可逆的锌金属阳极

引用

Science Bulletin 2023年第23期68卷 2993-3002,M0005页

作者：刘宇陈树麟袁豪熊方宇刘琴安永康张建勇吴璐孙建国 Yong-Wei Zhang 安琴友 John Wang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Materials Science and Engineering National University of SingaporeSingapore 117574Singapore Institute of High Performance Computing Agency for ScienceTechnology and Research(A*Star)Singapore 138632Singapore Institute of Materials Research and Engineering(IMRE) Agency for ScienceTechnology and Research(A*Star)Singapore 138634Singapore

锌表面自然形成的非均匀氧化层(ZnO)会与电解液发生反应形成Zn_(4)(OH)_(6)SO_(4)·xH_(2)O(ZSH)副产物,导致锌负极表面非均匀沉积,从而阻碍水性锌离子电池实际应用.为了排除氧化层分布形式的影响,本文利用表面终止化学设计策略在... 详细信息

锌表面自然形成的非均匀氧化层(ZnO)会与电解液发生反应形成Zn_(4)(OH)_(6)SO_(4)·xH_(2)O(ZSH)副产物,导致锌负极表面非均匀沉积,从而阻碍水性锌离子电池实际应用.为了排除氧化层分布形式的影响,本文利用表面终止化学设计策略在锌负极表面制备了一层完全氧化的ZnO层,研究发现锌负极均匀分布的ZnO层会原位演化形成致密的ZSH功能层.均匀且致密的ZSH能够有效隔绝电解液的腐蚀,从而有效提高锌负极界面的稳定性.此外,ZSH(002)晶面边缘的不饱和悬空键(如-O)更容易和Zn(H_(2)O)_(6)^(2+)结构中的锌离子形成强Zn-O键,可以促进Zn(H_(2)O)_(6)^(2+)的脱溶剂化和锌离子沿边扩散,实现了高度可逆的锌沉积行为并限制了副反应.基于此,本文提出与“表面脱水-晶体通道转移”机制明显不同的“边缘脱水-沿边缘转移”锌离子输运新机制.更重要的是,基于此组装的全电池显示出高循环稳定性(超过1000次循环)和高库仑效率(99.07%),验证了其潜在的实际应用价值.

关键词： Zn-O termination Zn Anode Solid electrolyte interphase Dendrite-free Zn ion battery

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：