检索结果-内蒙古大学图书馆

The effect of hierarchical single-crystal ZSM-5 zeolites with different Si/Al ratios on its pore structure and catalytic performance

引用

Frontiers of Chemical Science and Engineering 2021年第2期15卷 269-278页

作者： Yuexin Hou Xiaoyun Li Minghui Sun Chaofan Li Syed ul Hasnain Bakhtiar Kunhao Lei Shen Yu Zhao Wang Zhiyi Hu Lihua Chen Bao-Lian Su Laboratory of Living Materials at the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Silicate Material for Architectures Wuhan University of TechnologyWuhan 430070China Laboratory of Inorganic Materials Chemistry(CMI) University of NamurB-5000 NamurBelgium Nanostructure Research Centre(NRC) Wuhan University of TechnologyWuhan 430070China Clare Hall University of CambridgeCambridgeCB39ALUK

Hierarchical single-crystal ZSM-5 zeolites with different Si/Al ratios(Hier-ZSM-5-x,where x=50,100,150 and 200)were synthesized using an ordered mesoporous carbon-silica composite as hard ***-ZSM-5-x exhibits improved mass transport properties,excellent mechanical and hydrothermal stability,and higher catalytic activity than commercial bulk zeolites in the benzyl alcohol self-etherification *** show that a decrease in the Si/Al ratio in hierarchical single-crystal ZSM-5 zeolites leads to a significant increase in the acidity and the density of micropores,which increases the final catalytic *** effect of porous hierarchy on the diffusion of active sites and the final catalytic activity was also studied by comparing the catalytic conversion after selectively designed poisoned acid *** poisoned Hier-ZSM-5-x shows much higher catalytic conversion than the poisoned commercial ZSM-5 zeolite,which indicates that the numerous intracrystalline mesopores significantly reduce the diffusion path of the reactant,leading to the faster diffusion inside the zeolite to contact with the acid sites in the micropores predominating in ZSM-5 *** study can be extended to develop a series of hierarchical single-crystal zeolites with expected catalytic performance.

关键词： hierarchical zeolites single crystalline interconnected pores improved diffusion performance benzyl alcohol self-etherification reaction

来源：评论

学校读者我要写书评

暂无评论

Oriented Growth for Efficient and Scalable Perovskite Solar Cells by Vapor-Solid Reaction

SSRN

引用

SSRN 2023年

作者： Duan, Changyu Zhong, Jialing Hu, Shenghan Dou, Yichen Lu, Jianfeng Cheng, Yi-Bing Ku, Zhiliang State Key Laboratory of Advanced Technologies for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China State Key Laboratory of Silicate Materials for Architectures Wuhan University of Technology Wuhan430070 China

The precise control and understanding of crystal orientation in perovskite polycrystalline films are crucial for the development of efficient and stable devices. However, achieving this control remains a significant challenge. Herein, we have developed a PbI2 oriented growth strategy, combining with in-situ vapor-solid reaction transformations, to achieve oriented growth of full-vacuum perovskite films. GIWAXS analysis revealed the general pattern of PbI2 oriented vapor growth and in-situ vapor-solid reaction transformation in this two-step process. The resulting preferred orientation has effectively reduced trap states density, optimizing the carrier dynamics. As a result, champion efficiencies of 22.11% (0.148 cm2), 20.60% (1 cm2) and 19.41% (5 × 5 cm2 mini-modules) are achieved, which are the highest value for perovskite based on vapor-solid reaction. Additionally, the oriented growth method is applicable to a variety of guide layers and is extended to 30 × 30 cm2 film, demonstrating the universality and scalability of the method. © 2023, The Authors. All rights reserved.

关键词： Perovskite solar cells

来源：评论

学校读者我要写书评

暂无评论

Hierarchy in materials for maximized efficiency

引用

国家科学评论（英文版） 2020年第11期7卷 1626-1630页

作者： Li-Hua Chen Yu Li Bao-Lian Su State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology China Laboratory of Inorganic Materials Chemistry University of Namur Belgium

HIERARCHY Hierarchy, originated from an ancient Greek word'εραρχα', is a property characterized by the arrangement of a set of individual items [1] that are placed 'above','below'or'a...

HIERARCHY Hierarchy, originated from an ancient Greek word'εραρχα', is a property characterized by the arrangement of a set of individual items [1] that are placed 'above','below'or'at the same level as' one another in different *** items can be physical matter such as atoms, molecules, particles, objects, etc., or can be abstract and intangible entities such as names, values, categories, ***, although we are not consciously aware of its existence, is an essential concept in a wide variety of fields, such as life science, materials science, computer science, philosophy, mathematics, physics,chemistry, biology, geography, topography, organizational theory, systems theory, architecture, urban construction, industrial processes and the social sciences.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Enhanced CoCrFeNi (TiC) 0.2 high-entropy alloy by thermodynamic treatment

SSRN

引用

SSRN 2025年

作者： Liang, Shiqing Tu, Bingtian Li, Peiyao Chen, Xiaohong Li, Jiaqi Li, Jun Wei, Qinqin Shen, Qiang Hubei Longzhong Laboratory Hubei Xiangyang441000 China State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China State Key Laboratory of Advanced Refractories Wuhan University of Science and Technology Wuhan430081 China

CoCrFeNi based high-entropy alloy has good strength and toughness properties compared to conventional alloys, showing great application prospects in advanced fields such as aerospace structural materials. However, the yield strength of the as-cast CoCrFeNi(TiC)0.2 alloy remains low, limiting its practical application as a high-strength structural material. In this study, we enhance the CoCrFeNi(TiC)0.2 alloy by hot rolling and annealing, which promotes the ultrafine carbide precipitation, partial recrystallization of the alloy matrix, and residual high-density dislocations. The secondphase strengthening of carbide precipitation, fine-grain strengthening of alloy matrix, and dislocation strengthening jointly improve the yield strength. The yield strength of the CoCrFeNi(TiC)0.2 alloy after thermomechanical treatment at 700°C for 1 h has a high yield strength of 865 MPa, ultimate tensile strength of 1047 MPa and uniform elongation of 6.8%. This study provides a theoretical guidance for the composition and technological design of high performance alloys. © 2025, The Authors. All rights reserved.

关键词： Tensile strength

来源：评论

学校读者我要写书评

暂无评论

Tellurium intervened Fe-N codoped carbon for improved oxygen reduction reaction and high-performance Zn-air batteries

引用

Journal of materials Science & technology 2023年第6期137卷 215-222页

作者： Rui Wang Zihan Meng Xuemin Yan Tian Tian Ming Lei Rami Adel Pashameah Hala MAbo-Dief Hassan Algadi Nina Huang Zhanhu Guo Haolin Tang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan 528200China College of Chemistry and Environmental Engineering Yangtze UniversityJingzhou 434023China State Key Laboratory of Information Photonics and Optical Communications Beijing University of Posts and TelecommunicationsBeijing 100876China Department of Chemistry Faculty of Applied ScienceUmm Al-Qura UniversityMakkah 24230Saudi Arabia Department of Science and Technology University College-RanyahTaif UniversityP.O.Box 11099Taif 21944Saudi Arabia Department of Electrical Engineering Faculty of EngineeringNajran UniversityP.O.Box 1988Najran 11001Saudi Arabia College of Materials Science and Engineering Taiyuan University of Science and TechnologyTaiyuan 030024China Department of Chemical and Bimolecular Engineering Integrated Composites Laboratory(ICL)University of TennesseeKnoxvilleTN 37996USA Guangdong Hydrogen Energy Institute of WHUT Xianhu Hydrogen ValleyFoshan 528200China

Pyrolysis-acquired iron and nitrogen codoped carbon(Fe-N-C)has been comprehensively investigated for its promising oxygen reduction reaction(ORR)catalytic performance and structural *** modification of non-metal elements with larger atomic radius and the corresponding intrinsic microstructure-property relations are rarely *** this study,tellurium(Te)intervened Fe-N-C was prepared by micelles-induced polymerization with Te nanowires as an in-situ intervening *** out-plane bonding of Te with Fe induced the increase of both N content and proportion of pyridinic N on the material surface,thus improving the ORR catalytic *** assembled Zn-air battery demonstrated a maximum power density of 250 mW/cm^(2)and excellent rate capability under various discharge current densities,which was much better than the Pt/***,the current work demonstrates a novel Te/Fe-N-C material and reveals an original Te intervened Fe-N-C strategy and N reconfiguration mechanism,which is of great significance for the design of key materials in energy-related fields.

关键词： Te/Fe-N-C Assembly ORR Electrocatalysis Zn-air battery

来源：评论

学校读者我要写书评

暂无评论

A Novel NASICON‑Type Na_(3.5)MnCr_(0.5)Ti_(0.5)(PO_(4))_(3)Nanofiber with Multi‑electron Reaction for High‑Performance Sodium‑Ion Batteries

引用

advanced Fiber materials 2024年第2期6卷 561-569页

作者： Ting Zhu Wei Liu Xiaobin Liao Mengyao Wang Hao Fan Zihe Wei Congcong Cai Liyan Yang Mufang Li Dong Wang Ping Hu Xuanpeng Wang Key Laboratory of Textile Fiber and Products Ministry of EducationHubei International Scientific and Technological Cooperation Base of Intelligent TextileMaterials&ApplicationWuhan Textile UniversityWuhan 430200China Hubei Key Laboratory of Micro‑Nanoelectronic Materials and Devices School of MicroelectronicsHubei UniversityWuhan 430062China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Physical Science&Technology School of ScienceWuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Wuhan University of Technology(Xiangyang Demonstration Zone)Xiangyang 441000China

Sodium superionic conductors(NASICONs)show significant promise for application in the development of cathodes for sodium-ion batteries(SIBs).However,it remains a major challenge to develop the desired multi-electron reaction cathode with a high specific capacity and energy ***,we report a novel NASICON-type Na_(3.5)MnCr_(0.5)Ti_(0.5)(PO_(4))_(3)cathode obtained by combining electrospinning and stepwise sintering *** cathode exhibits a high discharge capacity of 160.4 mAh g^(−1)and operates at a considerable medium voltage of 3.2 *** Na_(3.5)MnCr_(0.5)Ti_(0.5)(PO_(4))_(3)cathode undergoes a multi-electron redox reaction involving the Cr^(3+/4+)(4.40/4.31 V ***/Na^(+)),Mn^(3+/4+)(4.18/4.03 V),Mn^(2+/3+)(3.74/3.41 V),and Ti^(3+/4+)(2.04/2.14 V)redox *** redox reaction enables a three-electron transfer during the Na+intercalation/de-intercalation *** a result,the Na_(3.5)MnCr_(0.5)Ti_(0.5)(PO_(4))_(3)demonstrates a significant enhancement in energy density,surpassing other recently reported SIB *** highly reversible structure evolution and small volume changes during cycling were demonstrated with in-situ X-ray diffraction,ensuring outstanding cyclability with 77%capacity retention after 500 ***,a NMCTP@C//Sb@C full battery was fabricated,which delivered a high energy density of 421 Wh kg−1 and exhibited good cyclability with 75.7%capacity retention after 100 *** rational design of composition regulation with multi-metal ion substitution holds the potential to unlock new possibilities in achieving high-performance SIBs.

关键词： Sodium-ion battery NASICON structure Na_(3.5)MnCr_(0.5)Ti_(0.5)(PO_(4))_(3)nanofiber Ex/in-situ characterization Multi-electron reaction

来源：评论

学校读者我要写书评

暂无评论

TiNB 0.8O 4 Microspheres with Pseudocapacitive Properties for Fast-Charging and Durable Sodium Storage

SSRN

引用

SSRN 2024年

作者： Li, Xinyuan Zhang, Tianyi Chen, Zhuo Fan, Hao Hu, Ping Cai, Congcong Zhou, Liang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei Wuhan430070 China Hubei Longzhong Laboratory Wuhan University of Technology Xiangyang Demonstration Zone Hubei Xiangyang441000 China

Titanium niobium oxides (TNO) are promising anode materials for sodium-ion batteries (SIBs) due to their efficient ion diffusion channels. However, their poor electronic conductivity and severe volume expansion during Na+ (de-)intercalation impede the longevity of SIBs. To address these issues, the core@shell TiNb0.8O4/C@C microspheres (TNO/C@C) have been developed to enhance electron conduction and Na+ diffusion. The TNO/C@C, featuring a dual conductive configuration, outperforms pure TNO and other variations like TNO/C and TNO@C that rely solely on either bulk or surface electronic conductors. Thus, the TNO/C@C anode material achieves a fast-charging rate of 200 C, allowing full charging in 2 seconds, and demonstrates long-term stability over 5000 cycles. In-situ Raman analysis reveals a zero-strain feature during sodiation/desodiation, which minimizes structural degradation over repeated cycles. In-situ EIS test indicates low electron resistance, enhancing both the rate capability and stability. Therefore, the bulk and surface dual conducting strategy offers new insights into robust and fast-charging SIBs. © 2024, The Authors. All rights reserved.

关键词： Sodium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Layered manganese phosphorus trisulfides for high-performance lithium-ion batteries and the storage mechanism

引用

Carbon Energy 2023年第3期5卷 160-169,170,171页

作者： Hailin Shen Yueling Cai Zhongtao Ma Peng Wang Bingkun Guo Jipeng Cheng Qianqian Li Hongtao Wang Zhongyuan Liu Anmin Nie Jinsong Wu Materials Genome Institute Shanghai UniversityShanghaiChina Shanghai Key Laboratory of Mechanics in Energy Engineering School of Mechanics and Engineering ScienceShanghai Institute of Applied Mathematics and MechanicsShanghai UniversityShanghaiChina State Key Laboratory of Silicon Materials School of Materials Science and EngineeringZhejiang UniversityHangzhouChina Center for X‐mechanics Zhejiang UniversityHangzhouChina State Key Laboratory of Metastable Materials Science and Technology Center for High Pressure ScienceYanshan UniversityQinhuangdaoChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhanChina Nanostructure Research Center Wuhan University of TechnologyWuhanChina

Although advanced anode materials for the lithium-ion battery have been investigated for decades,a reliable,high-capacity,and durable material that can enable a fast charge remains ***,we report that a metal phosphorous trichalcogenide of MnPS_(3)(manganese phosphorus trisulfide),endowed with a unique and layered van der Waals structure,is highly beneficial for the fast insertion/extraction of alkali metal ions and can facilitate changes in the buffer volume during cycles with robust structural *** few-layered MnPS_(3)anodes displayed the desirable specific capacity and excellent rate chargeability owing to their good electronic and ionic *** assembled as a half-cell lithium-ion battery,a high reversible capacity of 380 mA h g^(−1)was maintained by the MnPS_(3)after 3000 cycles at a high current density of 4 A g^(−1),with a capacity retention of close to or above 100%.In full-cell testing,a reversible capacity of 450 mA h g^(−1)after 200 cycles was maintained as *** results of in-situ TEM revealed that MnPS_(3)nanoflakes maintained a high structural integrity without exhibiting any pulverization after undergoing large volumetric expansion for the insertion of a large number of lithium *** kinetics of lithium-ion diffusion,stable structure,and high pseudocapacitance contributed to their comprehensive performance,for example,a high specific capacity,rapid charge-discharge,and long ***_(3)is thus an efficient anode for the next generation of batteries with a fast charge/discharge capability.

关键词： cyclic stability in‐situ TEM MnPS3 pseudocapacitance rate performance

来源：评论

学校读者我要写书评

暂无评论

Enhancing energy density of poly(vinylidene fluoride) composite film via addition of N-doped carbon modified boron nitride and sandwich-structural engineering

引用

Applied Surface Science 2023年第1期640卷

作者： Huang, Huabo Mei, Wentao Wang, Yucong Huang, Juan Li, Liang Ji, Jiayou Xiong, Chuanxi Hubei Key Laboratory of Plasma Chemistry and Advanced Materials Key Laboratory for Green Chemical Process of Ministry of Education School of Materials Science and Engineering Wuhan Institute of Technology Wuhan430205 China Key Laboratory of Green Processing and Functional New Textile Materials of Ministry of Education School of Textile Science and Engineering Wuhan Textile University Wuhan430200 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China

It is a challenge to simultaneously enhance dielectric constant and breakdown strength of dielectrics and achieve a greatly elevated energy density. Herein, polyaniline was first coated onto the surface of boron nitride nanosheets (BN), and then nitrogen-doped carbon (NC) was formed through a carburization process, resulting in BN@NC composite, which was subsequently added to poly(vinylidene fluoride) (PVDF) to prepare a composite film with high dielectric performance. The characterization showed that BN@NC effectively preserved the nanosheet structure of BN and formed strong hydrogen bonding interactions with the PVDF matrix, promoting the β-PVDF formation. This not only improved the compatibility but also enhanced the interfacial polarization between conductive NC and the polymer, leading to a high dielectric constant. Moreover, the electrically insulating BN prevented the formation of leakage current, resulting in a high breakdown strength. Finally, a sandwich-structured film was constructed, and exhibited a dielectric constant of 10.2 (at 1 kHz), a breakdown strength of 380 MV m−1, and an energy density of 6.1 J cm−3, which were 20%, 36%, and 74% higher, respectively, than those of pure PVDF film (8.5, 280 MV m−1, and 3.5 J cm−3). This work highlights significant potential for applications in low-cost and high-energy density dielectric composites. © 2023 Elsevier B.V.

关键词： Boron nitride

来源：评论

学校读者我要写书评

暂无评论

Mg-Based Micromotors with Motion Responsive to Dual Stimuli

引用

Research 2020年第1期2020卷 966-977页

作者： Kang Xiong Leilei Xu Jinwei Lin Fangzhi Mou Jianguo Guan State Key Laboratory of Advanced Technology for Materials Synthesis and Processing International School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China

Mg-based micromotors have emerged as an extremely attractive artificial micro/nanodevice,but suffered from uncontrollable propulsion and limited motion lifetime,restricting the fulfillment of complex ***,we have demonstrated Mg-based micromotors composed of Mg microspheres asymmetrically coated with Pt and temperature-sensitive poly(N-isopropylacrylamide)(PNIPAM)hydrogel layers in *** can implement different motion behaviors stemming from the driving mechanism transformation when encountering catalyzed substrates such as H_(2)O_(2) and respond to both H_(2)O_(2) concentration and temperature in aqueous *** as-constructed Mg-based micromotors are self-propelled by Pt-catalyzed H_(2)O_(2) decomposition following the self-consuming Mg-H_(2)O *** this case,they could further generate bilateral bubbles and thus demonstrate unique self-limitation motion like hovering when the phase transformation of PNIPAM is triggered by decreasing temperature or when the H_(2)O_(2) concentration after permeating across the PNIPAM hydrogel layer is high enough to facilitate bubble *** work for the first time provides a stimuli-induced“hovering”strategy for self-propelled micromotors,which endows Mg-based micromotors with an intelligent response to the surroundings besides the significant extension of their motion lifetime.

关键词： transformation consuming attractive

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：