检索结果-内蒙古大学图书馆

SSRN 2024年

作者： Liu, Wenxin Xu, Zhigang Geng, Xuehao Liu, Long Peng, Jian Shen, Qiang Wang, Chuanbin State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Chaozhou Branch Chemistry and Chemical Engineering Guangdong Laboratory Chaozhou521000 China Inner Mongolia North Heavy Industries Group Limited Company Nanjing Institute Nanjing210049 China

Enhancing the cohesion of Cr coatings is essential for preventing cracking and prolonging their durability in service. This study focuses on investigating the impact of columnar grain structures on the cohesive strength of the Cr coating on steel substrate. The systematic variation in deposition time during the magnetron sputtering process significantly affected the columnar grain structures, surface roughness, residual stress, and cohesive strength of Cr coatings. The results revealed that all Cr coatings exhibited preferred orientations along the (211) plane. As the deposition time increased from 1 to 4 h, the columnar grain size and surface roughness of Cr coatings progressively increased, while the residual compressive stress demonstrated a gradual decline. The cohesion strengths of the coating initially rose and then declined. Notably, the columnar grain size of approximately 700 nm achieved the best cohesion for Cr coatings on stainless steel, attributed to the combined effects of residual stress and surface roughness. This study underscores the significance of adjusting coating columnar grain structures to improve cohesion and offers valuable insights for the development of advanced hard coatings. © 2024, The Authors. All rights reserved.

关键词： Surface roughness

来源：评论

学校读者我要写书评

暂无评论

Ultraviolet and Thermal Dual-Curing Assisted Extrusion-Based Additive Manufacturing of Lunar Regolith Simulant for In-Site Construction on the Moon

SSRN

引用

SSRN 2023年

作者： Cui, Qianshun Wang, Tongcai Gu, Guangshuai Zhang, Rihan Zhao, Tingting Huang, Zhifeng Wang, Gong Chen, Fei Technology and Engineering Center of Space Utilization Chinese Academy of Sciences Beijing100094 China University of Chinese Academy of Sciences Beijing100049 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing International School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China

The establishment of a lunar base is crucial for lunar studies, resource extraction, and advancement in deep space exploration. Considering the limitations of rocket capacity and Earth-Moon transportation costs, lunar regolith is regarded as the most practical material for lunar base construction. Consequently, the in-situ additive manufacturing technology for simulated lunar regolith has been widely studied in recent years. This paper proposes a novel additive manufacturing approach for lunar regolith simulants. The simulants and several resins were mixed into a high-solid-loading paste, which was suitable for extrusion-based additive manufacturing process. To fully leverage the lunar environment, the feasibility of the ultraviolet (UV) and thermal curing of the resins was first verified, which was followed by the validation of the lunar regolith paste with the solid content of 86 wt.%. After the characterization of the ultraviolet and heat curing properties, the paste was further 3D printed via the extrusion-based device. The extruded paste underwent preliminary curing in a UV environment and was then heated to approximate the daytime lunar conditions, achieving complete curing of the printed component. The cured parts exhibited a compressive strength of 9.83 ± 1.07 MPa, meeting the requirements for infrastructure construction in the low-gravity lunar environment. This work offers significant implications for future in-situ construction on the Moon using extrusion-based lunar regolith additive manufacturing. © 2023, The Authors. All rights reserved.

关键词： 3D printing

来源：评论

学校读者我要写书评

暂无评论

Nanoceramic composites with duplex microstructure break the strength-toughness tradeoff

引用

Journal of materials Science & technology 2020年第23期58卷 1-9页

作者： Ji Zou Hai-Bin Ma Jing-Jing Liu Wei-Min Wang Guo-Jun Zhang Zheng-Yi Fua State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China School of Metallurgy and Materials University of BirminghamB152TTBirminghamUK China Nuclear Power Technology Research Institute Shenzhen518026China State Key Laboratory for Modification of Chemical Fibers and Polymer Materials Institute of Functional MaterialsDonghua UniversityShanghai201620China

There is a strength and fracture toughness tradeoff in nanoceramic composite. The strength varies reciprocally with the grain size whereas the toughness contributed by compressive residual stress increases with the dimension of the second phase. In this work, a novel duplex microstructure with reinforced clusters composing of nanosized grains was proposed and validated using a model system of B_(4)C-TiB_(2) ceramics densified by carbide boronizing. As-obtained ceramics exhibit excellent combined mechanical properties at room temperature, including Vickers hardness, Young's modulus, flexural strength and fracture toughness(by surface crack in flexure method) of 32.1 ± 2.7 GPa, 506.9 ± 2.0 GPa,1175 ± 71 MPa and 5.1 ± 0.4 MPa m^(0.5), respectively. Both strength and toughness are at least ~30 % higher than the counterparts with similar composition but homogenously distributed TiB_(2) grains. Graphite onion was confirmed to be an intermediate product during reactive sintering, it facilitated the grain pullout during fracture and retained the nanometric TiB_(2) grain in the cluster, both of which also contribute the toughening and strengthening mechanisms in the B_(4)C-TiB_(2) ceramics.

关键词： Borides Microstructure In-situ reaction Mechanical properties Boron carbide Ceramics

来源：评论

学校读者我要写书评

暂无评论

Hierarchical ZrO2@N-doped carbon nano-networks anchored ultrafine Pd nanoparticles for highly efficient catalytic hydrogenation

引用

Science China Chemistry 2022年第8期65卷 1661-1669页

作者： Pu, Chun Li, Rui-Dong Chang, Gang-Gang Chen, Min-Jie Yao, Yao Li, Jun-Sheng Zhao, Bo Wu, Lu Zhang, Yue-Xing Yang, Xiao-Yu School of Chemistry Chemical Engineering and Life Science & State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan China School of Power Engineering Naval University of Engineering Wuhan China Hubei Collaborative Innovation Center for Advanced Organic Chemical Materials Key Laboratory for the Synthesis and Application of Organic Functional Molecules of Ministry of Education College of Chemistry and Chemical Engineering Hubei University Wuhan China

Carbon supported metal catalysts have received considerable interest due to their widespread applications in heterogeneous catalysis. However, the controllable synthesis of carbon support with defined morphology and composition still represents great challenging. Herein, we reported the synthesis of a well-defined hierarchically nanosized H-ZrO2/NC (nitrogen-doped carbon) network via an inheritable carbonization strategy. When immobilizing the palladium clusters into the support, the N-doped sites and oxygen vacancy of the carbon composite can effectively stabilize and activate Pd through strong metal-support interaction which was also confirmed by density functional theory (DFT) calculations. Moreover, the hierarchically nanosized network can contribute to the exposure of active sites and facilitate the mass transfer during the catalytic process. As a result, benefiting from the hierarchical structure, composition and hydrolytic nature, Pd@H-ZrO2/NC exhibited excellent catalytic activity and stability towards the hydrogenation of furfural in mild reaction conditions, as well as good universality toward the hydrogenation of a series of unsaturated hydrocarbons.

关键词： hierarchical carbon nanosized networks composites metal-support interaction catalytic hydrogenation

来源：评论

学校读者我要写书评

暂无评论

Deep learning-enhanced NIR-II fluorescence volumetric microscopy for dynamic 3D vascular imaging

引用

Journal of Innovative Optical Health Sciences 2025年第3期18卷 154-164页

作者： Shiyi Peng Yuhuang Zhang Xuanjie Mou Tianxiang Wu Mingxi Zhang Jun Qian State Key Laboratory of Extreme Photonics and Instrumentation International Research Center for Advanced PhotonicsCentre for Optical and Electromagnetic ResearchCollege of Optical Science and EngineeringZhejiang UniversityHangzhou 310058P.R.China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070P.R.China

Three-dimensional (3D) visualization of dynamic biological processes in deep tissue remains challenging due to the trade-off between temporal resolution and imaging depth. Here, we present a novel near-infrared-II (NIR-II, 900–1880nm) fluorescence volumetric microscopic imaging method that combines an electrically tunable lens (ETL) with deep learning approaches for rapid 3D imaging. The technology achieves volumetric imaging at 4.2 frames per second (fps) across a 200 μm depth range in live mouse brain vasculature. Two specialized neural networks are utilized: a scale-recurrent network (SRN) for image enhancement and a cerebral vessel interpolation (CVI) network that enables 16-fold axial upsampling. The SRN, trained on two-photon fluorescence microscopic data, improves both lateral and axial resolution of NIR-II fluorescence wide-field microscopic images. The CVI network, adapted from video interpolation techniques, generates intermediate frames between acquired axial planes, resulting in smooth and continuous 3D vessel reconstructions. Using this integrated system, we visualize and quantify blood flow dynamics in individual vessels and are capable of measuring blood velocity at different depths. This approach maintains high lateral resolution while achieving rapid volumetric imaging, and is particularly suitable for studying dynamic vascular processes in deep tissue. Our method demonstrates the potential of combining optical engineering with artificial intelligence to advance biological imaging capabilities.

关键词： NIR-II fluorescence bioimaging volumetric microscopy deep learning reconstruction dynamic vascular imaging

来源：评论

学校读者我要写书评

暂无评论

High ammonia sensitive ability of novel Cu12Sb4S13 quantum dots@reduced graphene oxide nanosheet composites at room temperature

引用

Chinese Chemical Letters 2020年第8期31卷 2109-2114页

作者： Yueli Liu Binghua Sang Haoran Wang Zijing Wu Yuxuan Wang Ziwei Wang Zhuoyin Peng Wen Chen State Key Laboratory of Silicate Materials for Architectures School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China The Key Laboratory of Efficient&Clean Energy Utilization School of Energy and Power EngineeringChangsha University of Science and TechnologyChangsha 410111China

In the work,rGO nanosheet is synthesized using the typical Hummer’s method,then Cu12Sb4 S13 quantum dots@rGO composites are prepared by solvent thermal method,and Cu12Sb4 S13 quantum dots with the average size of 5 nm are densely distributed on the surface of rGO ***3 gas response of Cu12Sb4 S13quantum dots@rGO nanosheet composites at room te mperature of 25℃is enhanced compared with the pure Cu12Sb4 S13 quantum dots and rGO nanosheet,and the composites possess an excellent stability during the humidity range of 45%-80%with a low detection limit of 1 ppm,which is related with the intrinsic hydrophobicity characteristic of Cu12Sb4 S13 quantum *** also proves that Cu12Sb4 S13quantum dots@rGO nanosheet composites have a quite high selectivity towards ammonia compared with ethanol,methanol,acetone,toluene,hydrogen sulfide and nitrogen dioxide at room *** gas sensing mechanism of the composites is discussed primarily.

关键词： Cu12Sb4S13 quantum dots@rGO nanosheet Composites NH3 Room temperature Gas response

来源：评论

学校读者我要写书评

暂无评论

Major strategies for improving the performance of perovskite solar cells

引用

iEnergy 2023年第3期2卷 172-199页

作者： Lixiu Zhang Hang Li Kai Zhang Wenzhe Li Chuantian Zuo George Omololu Odunmbaku Jingde Chen Cong Chen Luozheng Zhang Ru Li Yuping Gao Baomin Xu Jiangzhao Chen Yongsheng Liu Yang Wang Yanlin Song Jianxin Tang Feng Gao Qing Zhao Yong Peng Mingzhen Liu Lei Tao Yuelong Li Zhimin Fang Ming Cheng Kuan Sun Dewei Zhao Yixin Zhao Shihe Yang Chenyi Yi Liming Ding Center for Excellence in Nanoscience(CAS) Key Laboratory of Nanosystem and Hierarchical Fabrication(CAS)National Center for Nanoscience and TechnologyBeijing 100190China State Key Laboratory of Power System Department of Electrical EngineeringTsinghua UniversityBeijing 100084China Shenzhen Graduate School Peking UniversityShenzhen 518055China School of Environmental Science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China College of Materials Science and Engineering&Engineering Research Center of Alternative Energy Materials&Devices Sichuan UniversityChengdu 610065China School of Energy&Power Engineer-ing Chongqing UniversityChongqing 400044China Institute for Energy Research Jiangsu UniversityZhenjiang 212013China Institute of New Energy Technology Department of Electronic EngineeringCollege of Information Science and TechnologyJinan UniversityGuangzhou 510631China Institute of Functional Nano&Soft Materials(FUNSOM) Soochow UniversitySuzhou 215123China Department of Materials Science and Engineering Southern University of Science and TechnologyShenzhen 518055China College of Optoelectronic Engineering Chongqing UniversityChongqing 400044China College of Chemistry Nankai UniversityTianjin 300071China Institute of Chemistry Chinese Academy of SciencesBeijing 100190China State Key Lab for Mesoscopic Physics and Frontiers Science Center for Nano-optoelec-tronics School of PhysicsPeking UniversityBeijing 100871China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Materials and Energy University of Electronic Science and Technology of ChinaChengdu 611731China Institute of Photoelectronic Thin Film Devices and Technology Nankai UniversityTianjin 300350China School of Materials Science and Engineering Shaanxi Normal UniversityXi’an 710119China

Metal halide perovskite solar cell(PSC)has successfully distinguished itself in optoelectronic field by virtue of the sharp rise in power conversion efficiency over the past *** remarkable efficiency breakthrough at such a fast speed can be mainly attributed to the comprehensive study on film deposition techniques,especially the effective management of surface and interfacial defects in recent ***,we summarized the current trends in performance enhancement for PSCs,with a focus on the generally applicable strategies in high-performance works,involving deposition methods,compositional engineering,additive engineering,crystallization manipulation,charge transport material selection,interfacial passivation,optical coupling effect and constructing tandem solar *** directions and perspectives are also provided.

关键词： Perovskite solar cells efficiency improvement strategies milestones

来源：评论

学校读者我要写书评

暂无评论

Quantum dots assisted in vivo two-photon microscopy with NIR-Ⅱemission

引用

Photonics Research 2022年第1期10卷 189-196页

作者： HUWEI NI YALUN WANG TAO TANG WENBIN YU DONGYU LI MUBIN HE RUNZE CHEN MINGXI ZHANG JUN QIAN State Key Laboratory of Modern Optical Instrumentations Centre for Optical and Electromagnetic ResearchCollege of Optical Science and EngineeringInternational Research Center for Advanced PhotonicsZhejiang UniversityHangzhou 310058China SIEE(Sussex AI Institute) Zhejiang Gongshang UniversityHangzhou 310018China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Britton Chance Center for Biomedical Photonics Wuhan National Laboratory for OptoelectronicsHuazhong University of Science and TechnologyWuhan 430074China

With the advantages of high resolution and deep penetration depth,two-photon excited NIR-Ⅱ(900–1880 nm)fluorescence(2PF)microscopic bioimaging is ***,due to the lack of imaging systems and suitable probes,few such works,to our best knowledge,were demonstrated utilizing NIR-II excitation and NIR-Ⅱfluorescence ***,we used aqueously dispersible Pb S/Cd S quantum dots with bright NIR-II fluorescence as the contrast *** the excitation of a 1550 nm femtosecond(fs)laser,they emitted bright 2 PF in the NIR-Ⅱ***,a 2PF lifetime imaging microscopic(2PFLIM)system was implemented,and in vivo 2PFLIM images of mouse brain blood vessels were obtained for the first time to our best *** improve imaging speed,an in vivo two-photon fluorescence microscopy(2 PFM)system based on an In Ga As camera was implemented,and in vivo 2PFM images of QDs-stained mouse brain blood vessels were obtained.

关键词： excitation photon system

来源：评论

学校读者我要写书评

暂无评论

Functionally Graded Triply Periodic Minimal Surface Scaffold of Ha-Al2o3 Via Vat Photopolymerization 3d Printing

SSRN

引用

SSRN 2023年

作者： Liu, Qiuyu Tang, Qinchao Huang, Zhifeng Li, Zhiwei Wang, Xuye Wen, Pin Bai, Yi Chen, Fei Hubei Longzhong Laboratory Wuhan University of Technology Xiangyang Demonstration Zone Xiangyang441000 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China International School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China State Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration Key Laboratory of Oral Biomedicine Ministry of Education Hubei Key Laboratory of Stomatology School & Hospital of Stomatology Wuhan430079 China Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics School of Science Wuhan University of Technology Wuhan430070 China

Hydroxyapatite (HA) is widely used in scaffolds due to its high similarity in the composition to natural bone. However, the weak and fragile characteristics of synthetic HA limit its application. The strength of HA can be increased by the incorporation of alumina (Al2O3) to obtain composites with extraordinary compressive strength and biocompatibility. HA-Al2O3 composites with different ratios were prepared by Vat photopolymerization 3D printing, and their shrinkage, porosity, phase composition and biocompatibility were systematically investigated. In addition, the Diamond structure of the scaffold was chosen to achieve the trade-off relationship between compressive strength and porosity. The results suggest that the HA-Al2O3 composite with 20 vol% HA possesses the maximum compressive strength and 60 vol% HA has optimal biocompatibility. A compositional gradient scaffold from 60 vol% HA and 20 vol% HA was proposed to satisfy different needs of the different parts in scaffold for biocompatibility and compressive strength. The HA-Al2O3 gradient scaffold achieves a preferable compressive strength of 13.7 MPa while possessing gradient biocompatibility. © 2023, The Authors. All rights reserved.

关键词： Hydroxyapatite

来源：评论

学校读者我要写书评

暂无评论

Phase-junction Ag/TiO_(2)nanocomposite as photocathode for H_(2)generation

引用

Journal of materials Science & technology 2021年第24期83卷 179-187页

作者： Hemdan S.H.Mohamed Mohamed Rabia Xian-Gang Zhou Xu-Sen Qin Gomaa Khabiri Mohamed Shaban Hussein A.Younus S.Taha Zhi-Yi Hu Jing Liu Yu Li Bao-Lian Su State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China Physics Department Faculty of ScienceFayoum UniversityFayoum63514Egypt Nanophotonics and Applications Lab Physics DepartmentFaculty of ScienceBeni-Suef UniversityBeni-Suef62514Egypt Chemistry Department Faculty of ScienceFayoum UniversityFayoum63514Egypt Nanostructure Research Centre(NRC) Wuhan University of TechnologyWuhan430070China Laboratory of Inorganic Materials Chemistry(CMI) University of Namur61 rue de Bruxelles5000NamurBelgium

Developing anatase/rutile phase-junction in Ti O_(2)to construct Z-scheme system is quite effective to improve its photoelectrochemical *** this work,the anatase/rutile phase-junction Ag/Ti O_(2)nanocomposites are developed as photocathodes for hydrogen *** optimized Ag/Ti O_(2)nanocomposite achieves a high current density of 1.28 m A cm-2,an incident photon-to-current conversion efficiency(IPCE)of 10.8%,an applied bias photon-to-current efficiency(ABPE)of 0.32 at 390 nm and a charge carriers’lifetime up to 2000 *** enhancement on photoelectrochemical activity can be attributed to:(ⅰ)the generated Z-scheme system in the anatase/rutile phase-junction Ag/Ti O_(2)photocathode enhances the separation,diffusion and transformation of electron/hole pairs inside the structure,(ⅱ)Ag nanodots modification in the anatase/rutile phases leading to the tuned band gap with enhanced light absorption and(ⅲ)the formed Schottky barrier after Ag nanodots surface modification provides enough electron traps to avoid the recombination of photogenerated electrons and *** results here suggest that developing phase-junction nanocomposite as photocathode will provide a new vision for their enhanced photoelectrochemical generation of hydrogen.

关键词： Ag/TiO_(2)nanocomposites Anatase/rutile phase-junction Z-scheme Photocathode H2 generation

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：