检索结果-内蒙古大学图书馆

A multi-physics model-based approach for macro-structured surface design to enhance heat transfer in R410A flash spray cooling systems

引用

International Journal of Heat and Mass Transfer 2025年 247卷

作者： Ye, Ying-Dong Lin, Xiang-Wei Zhou, Zhi-Fu Liu, Maochang Chen, Bin Lu, Youjun Jing, Dengwei State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

Refrigerant flash spray cooling, which offers high heat flux dissipation at low temperatures, holds significant potential for thermal management of high-power electronic devices. While surface structure design can further amplify heat transfer performance, the lack of systematic methodologies to address the complexities of spray cooling has hindered progress. This study establishes a multi-physics computational framework that couples two-phase flash spray dynamics, liquid film heat transfer, and solid heat conduction to systematically optimize macro-structured surfaces. After validating the model against experimental data, the effects of surface geometry (flat, square, straight and pyramid fins) and dimensional parameters on cooling performance were analyzed. The pyramid structure demonstrated superior performance, achieving a 9 K reduction in surface temperature and a 70 % increase in effective heat transfer coefficient compared to the flat surface. Quantitative analysis revealed that optimal macro-structured design hinges on maximizing effective heat transfer area while ensuring uniform liquid film distribution via controlled droplet dynamics. Further parametric studies on nine pyramid geometries identified a base length of 1 mm and height-to-edge ratio of 0.7 as the optimal configuration, balancing heat transfer enhancement and manufacturing costs through a newly proposed Composite Heat Transfer Factor (CHTF). This work provides a mechanistic framework for designing enhanced surfaces in spray cooling systems, bridging critical gaps in both theoretical understanding and engineering application. © 2025 Elsevier Ltd

关键词： Film cooling

来源：评论

学校读者我要写书评

暂无评论

Wall-to-bed heat transfer in supercritical water fluidized bed using CFD-DEM

引用

Particuology 2021年第3期19卷 113-123页

作者： Tianning Zhang Youjun Lu State Key Laboratory of Multiphase Flow in Power Engineering(SKLMFPE) Xi’an Jiaotong UniversityXi’anShaanxi 710049PR China

Supercritical water fluidized bed(SCWFB)reactors are designed to gasify biomass or coal with high *** this paper,the wall-to-bed heat transfer characteristics in SCWFB are studied using the computational fluid dynamics and discrete element method(CFD-DEM)coupled with a constant heat flux *** different methods are considered to deal with the multiphase heat flux boundary in CFD-DEM because there is currently no single widely accepted ***’s method predicts a more accurate wall-to-bed heat transfer coefficient in SCWFB than Lattanzi’s method according to comparisons of the simulation results with an empirical *** influences of temperature,pressure,velocity,and the solid phase properties,such as the particle diameter,particle heat capacity,particle thermal conductivity,and particle density,on the SCWFB wall-to-bed heat transfer characteristics are studied based on Zhang’s *** simulation results help reveal the SCWFB heat transfer characteristics.

关键词： Supercritical water Fluidized bed Heat transfer DEM-CFD Constant heat flux

来源：评论

学校读者我要写书评

暂无评论

Noble-metal free plasmonic nanomaterials for enhanced photocatalytic applications—A review

引用

Nano Research 2022年第12期15卷 10268-10291页

作者： Jinghua Li Yiming Zhang Yalong Huang Bing Luo Li Jing Dengwei Jing International Research Center for Renewable Energy&State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an710049China School of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’an710049China

Plasmonic nanomaterial catalysis is currently at the frontier of photocatalysis,overcoming the limitations of wide bandgap semiconductors for light *** localized surface plasmon resonance(LSPR)properties allow broad ultraviolet-visible-near infrared ray(UV-vis-NIR)absorption,making it an ideal material for solar energy *** plasmonic nanostructures rely on precious *** noble metal plasmonic nanomaterials have proven to be one of the strategies for enhancing photocatalytic activity,their expensive cost and limitations in light absorption range have hindered their practical *** a result,noble-metal free plasmonic nanomaterials have risen to the top of the research priority ***,this paper reviews the fundamental principles and classification of the LSPR effect of noble-metal free plasmonic nanomaterials in photocatalytic and their recent applications in hydrogen generation,carbon dioxide reduction,and pollutant *** cases elucidate the possible working mechanism of enhanced photocatalysis by noble-metal free plasmonic ***,the challenges and future opportunities for noble-metal free plasmonic nanomaterials in energy conversion and storage are discussed and envisioned.

关键词： localized surface plasmon resonance(LSPR) noble-metal free plasmonic nanomaterials photocatalysis

来源：评论

学校读者我要写书评

暂无评论

Thermo-Hydraulic Characteristics of Non-Isothermal Batch Transportation Pipeline System with Different Inlet Oil Temperature

引用

Journal of Thermal Science 2023年第3期32卷 965-981页

作者： CHEN Zhimin YUAN Qing JIANG Weixin LI Zongze YU Bo School of Mechanical Engineering Beijing Institute of Petrochemical TechnologyBeijing 102617China School of Chemical Engineering and Technology Xi'an Jiaotong UniversityXi'an 710049China Faculty of Environment and Life Beijing University of TechnologyBeijing 100124China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

The batch transportation process of several kinds of crude oil is accomplished by an entire coupled pipeline system,which exhibits complex thermo-hydraulic *** on the coupled characteristics among soil,pipelines and devices(including pumps,heating furnaces and valves),a coupled simulation model of batch transportation for the crude oil pipeline system is established,and a novel coupled simulation algorithm is *** simulation results are in good agreement with the field data of an actual crude oil pipeline *** addition,based on the numerical simulation,thermo-hydraulic characteristics of pipeline system are investigated,and some new thermo-hydraulic characteristics are *** the batch transportation process with constant flowrate,the change trends of temperature at the outlet of each pipeline segment are hysteretic and the change ranges of temperature become small along *** the adjustment of devices influences thermohydraulic characteristics to some *** the batch transportation process with variable flowrate,the complex thermo-hydraulic characteristics are exhibited,which are induced by the comprehensive influence of the changes of oil type,flowrate and absorbed/released *** with the transportation process with constant flowrate,the high-viscosity oil exhibits similar minimum temperature and lower maximum pressure in the transportation process with variable flowrate,which means that the higher transportation safety of pipeline system is *** study can provide a scientific reference for making the safer batch transportation scheme of crude oil pipeline system.

关键词： crude oil pipeline system batch transportation coupled simulation variable flowrate thermo-hydraulic characteristics

来源：评论

学校读者我要写书评

暂无评论

Technological innovations on direct carbon mitigation by ordered energy conversion and full resource utilization

引用

Carbon Neutrality 2022年第1期1卷 598-619页

作者： Liejin Guo Zhisong Ou Ya Liu Zhiwei Ge Hui Jin Guobiao Ou Mengmeng Song Zihao Jiao Wenhao Jing State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityNo.28Xianning West RoadXi’an 710049People’s Republic of China

Coal consumption leads to over 15 billion tons of global CO_(2) emissions annually,which will continue at a considerable intensity in the foreseeable *** remove the huge amount of CO_(2),a practically feasible way of direct carbon mitigation,instead of capturing that from dilute tail gases,should be developed;as intended,we developed two innovative supporting technologies,of which the status,strengths,applications,and perspective are discussed in this *** is supercritical water gasification-based coal/biomass utilization technology,which orderly converts chemical energy of coal and low-grade heat into hydrogen energy,and can achieve poly-generation of steam,heat,hydrogen,power,pure CO_(2),and *** other one is the renewables-powered CO_(2) reduction techniques,which uses CO_(2) as the resource for carbon-based fuel *** combining the above two technical loops,one can achieve a full resource utilization and zero CO_(2) emission,making it a practically feasible way for China and global countries to achieve carbon neutrality while creating substantial domestic benefits of economic growth,competitiveness,well-beings,and new industries.

关键词： Carbon neutrality Coal utilization Direct carbon mitigation Supercritical water gasification Renewable energy CO_(2)reduction

来源：评论

学校读者我要写书评

暂无评论

Angle Scattering Method for Soot Concentration Measurement under Ultra-Low Emissions Condition

引用

Energy engineering 2022年第2期119卷 511-522页

作者： Bin Yang Xingchen Zhu Jie Deng Xiaoxu Guo Jinke Han Xiaowei Liu School of Energy and Power Engineering Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power EngineeringUniversity of Shanghai for Science and TechnologyShanghai200093China State Key Laboratory of Coal Combustion Huazhong University of Science and TechnologyWuhan430074China

Aiming at the problem of soot concentration measurement under ultra-low emission conditions,a forward small angle soot concentration measurement method is *** a typical boiler emission of 0.1μm-3.0μm bimodal distribution soot as an object,the particle scatter simulation calculation under different parameters is carried out,and the influence of detection angle and particle size on the angular scatteringmeasurement of ultra-low emission soot is *** influence of detection angle and particle size on the angular scatteringmeasurement of ultra-lowemission soot is ***,thewavelength of incident light is 650 nm,and the forward detection angle parameter is 15◦for the design of forward small angle soot concentration measurement *** experimental system for measuring soot with standard concentration is *** of particle concentration measurement of 1.0μm and 3.0μm under ultra-low emission conditions are carried *** results show that the average deviation of soot concentration measurement is less than 0.10 mg/m3 under the condition of ultra-low emission by using 15◦of forward detection,which provides an effective way for monitoring ultra-low emission soot concentration in coal-fired power plants.

关键词： Emission monitoring ultra-low emission soot concentration angular scattering

来源：评论

学校读者我要写书评

暂无评论

氧化铁光阳极界面内建电场调控强化光生电荷空间分离

引用

Science China Materials 2023年第2期66卷 603-613页

作者：卯连连邓豪李明涛沈少华 International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China

为了缓解氧化铁光阳极内部和表面的电荷复合,本文引入了一种界面电荷调控策略,利用界面内建电场(IEF)促进电荷的空间分离.水热生长的钛掺杂氧化铁(Hem)纳米棒通过简单的两步浸渍涂层过程,以石墨相氮化碳(g-C_(3)N_(4))和小的三氧化钼(Mo... 详细信息

为了缓解氧化铁光阳极内部和表面的电荷复合,本文引入了一种界面电荷调控策略,利用界面内建电场(IEF)促进电荷的空间分离.水热生长的钛掺杂氧化铁(Hem)纳米棒通过简单的两步浸渍涂层过程,以石墨相氮化碳(g-C_(3)N_(4))和小的三氧化钼(MoO_(3))团簇进行修饰.与原始的Hem相比,得到的Hem/C_(3)N_(4)/MoO_(3)表现出显著增强的光电化学分解水性能,相对于可逆氢电极,在1.23 V时,光阳极电流密度从0.3 mA cm^(-2)显著提高到1.6 mA cm^(-2),入射光子-电流转换效率在300 nm时达到18.4%.结果表明,在Hem/C_(3)N_(4)/MoO_(3)异质结中引入IEF是通过调控界面电荷特性实现的,此界面电荷特性是由Hem/C_(3)N_(4)界面的TypeⅡ能带排列和光阳极表面增强的能带弯曲所引起的,IEF能显著促进电荷的空间分离.研究这一界面电荷调控过程能为基于氧化铁的光阳极和其他半导体器件提供一种简单有效的策略,通过缓解载流子传输动力学的瓶颈,促进电荷的空间分离,实现高效的太阳能转换.

关键词：太阳能转换阳极电流密度半导体器件能带弯曲入射光子石墨相氮化碳载流子传输氢电极

来源：评论

学校读者我要写书评

暂无评论

Deformation Analysis and Prediction of Pneumatic Probe Based on Fluid-structure Interaction

引用

International Journal of Fluid Machinery and Systems 2023年第1期16卷 1-13页

作者： Fan, Yang Dexin, Qiu Xinwei, Zhao Qingyi, Sai Xiaoshu, Cai School of Energy and Power Engineering University of Shanghai for Science and Technology No. 516 Jungong Road Shanghai200093 China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Sh anghai for Science and Technology No. 516 Jungong Road Shanghai200093 China

As an essential tool for measuring flow field, pneumatic probes have gained a wide range of applications. In order to obtain the flow field parameters accurately, it is also crucial to study the deformation of the pneumatic probe structure in flow field. In this paper, the deformation of the conical probe is numerically simulated under the condition of steady incoming flow in the transonic flow field. The fluid-structure interaction and modal analysis methods are used to obtain the deformation and vibration frequency of the probe. The results show that the vibration of the probe is underdamped under the action of two-way fluid-structure interaction, and the total deformation decays exponentially, and the total deformation after stabilization is the same as the result of one-way fluid-structure interaction. For the same material probe, the total deformation changes with time in the same dimensionless expression, and the vibration frequency as well as damping factor do not change due to the variation of flow field. The accuracy of the dimensionless expressions was verified by different incoming flow conditions and the probe material. For the cases studied in this paper, the maximum total deformation, vibration frequency and damping factor of the probe in the flow field can be obtained by using one-way fluid-structure interaction, modal analysis and two-way fluid-structure interaction with a small number of cycles, respectively, so that the total deformation of the probe in the flow field can be predicted over time. The method obtained in this paper can significantly reduce the calculation time for obtaining the probe deformation data in the flow field and improve the work efficiency, which can provide a reference for the design, calibration and application of probes in engineering applications. © 2023, Turbomachinery Society of Japan. All rights reserved.

关键词： Modal analysis

来源：评论

学校读者我要写书评

暂无评论

Optimization of Thermal Conductivity of Alumina-Filled Composites by Numerical Simulations

引用

Journal of Thermal Science 2023年第4期32卷 1569-1582页

作者： LI Shikun LIU Bin JIA Xiao XU Min ZONG Ruoyu LIU Guohua HUAI Xiulan Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy Utilization North China Electric Power UniversityBeijing102206China Institute of Engineering Thermophysics Chinese Academy of SciencesBeijing100190China Nanjing Institute of Future Energy System Nanjing211135China

Understanding the correlation between the physical features of composite components and thermal conductive pathway is beneficial to optimizing the overall heat-transfer ***,we conduct numerical simulation to investigate the thermal conductivity and heat flux distributions of alumina(Al_(2)O_(3))-filled *** finite element model was verified by both experimental data and theoretical *** crucial factors include the influence of the interface thermal resistance,the intrinsic thermal conductivity of the matrix and Al_(2)O_(3)filler,and the size effect of Al_(2)O_(3)fillers were *** single Al_(2)O_(3)-filled composites,the results indicate that increasing the intrinsic thermal conductivity of the matrix is conductive to bridge the Al_(2)O_(3)pathway along heat-transfer direction,but there are very limited contributions by enhancing the intrinsic thermal conductivity of Al_(2)O_(3)filler,tuning the size of Al_(2)O_(3)filler,and reducing the interface thermal *** introducing the multiscale fillers,it is found that the high thermal conductivity can be achieved by regulating their size matching *** the optimal binary ratio of 70:30(40µm:15µm)and ternary ratio of 55:35:10(40µm:15µm:10µm),the heat-conduction network presents the dominant skeleton of large-sized filler and the bridging branch of small-sized fillers features,which facilitates the formation of a complete and continuous thermal conductive *** study gives a practical guidance for the thermal conductive design of Al_(2)O_(3)-filled composites.

关键词： optimization size matching effect thermal conductivity numerical simulation multiscale Al_(2)O_(3)filler

来源：评论

学校读者我要写书评

暂无评论

Heterobimetallic CoCeO_(x) derived from cobalt partially-substituted Ce-UiO-66 for chlorobenzene efficient catalytic destruction

引用

Journal of Rare Earths 2023年第6期41卷 810-819,I0001页

作者： Lu Li Shuangshuang Fu Dan Tao Jiaxun Zhang Mingjiao Tian Jianwen Shi Mudi Ma Chi He State Key Laboratory of Electrical Insulation and Power Equipment Center of Nanomaterials for Renewable EnergySchool of Electrical EngineeringXi'an Jiaotong UniversityXi'an 710049China School of Environmental and Municipal Engineering Xi'an University of Architecture and TechnologyXi'an 710055China College of Geology and Environment Xi'an University of Science and TechnologyXi'an 710054China State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power EngineeringXi'an Jiaotong UniversityXi'an 710049China School of Human Settlements and Civil Engineering Xi'an Jiaotong UniversityXi'an 710049China

Here,a metal-organic framework(MOF)-templated strategy was applied to synthesize the CoCeO_(x) bimetallic catalysts by calcining Co partially-substituted *** is indicated that the substituted Co limited Ce cations in Ce-UiO-66 framework,which affects its growth and structure crystallinity to some *** pyrolysis treatment,the derived bimetallic oxide(CoCeO_(x)-M)can basically keep the octahedral structure and the surface area is much higher than the bulk metal composite oxide(CoCeO_(x)-B)prepared by traditional *** reveal that CoCeO_(x)-M performs the best chlorobenzene degradation capacity,superior stability and vapor tolerance compared with those of CeO_(2)-M(derived from Ce-UiO-66)and CoCeO_(x)-*** the same time,it is favorable to inhibit the formation of CO during the oxidation *** superior catalytic performance of CoCeO_(x)-M is attributed to a good dispersion of metal cations,high surface area and active oxygen concentration,and good redox ***,the formation of organic byproducts especially chlorinated organics can be obviously prohibited over CoCeO_(x)-M compared with that of CeO_(2)-*** study reveals that chlorobenzene dissociates on the surface of CoCeO_(x)-M to form carboxylates such as acetate species,maleate and phenolate before finally oxidized into CO_(2),H_(2)O,and *** present work poses new insights into the fabrication of efficient catalysts for industrial CVOC purification.

关键词： Ce-UiO-66 CoCeO_(x)bimetallic oxide Chlorobenzene Catalytic oxidation Reaction mechanism Rare earths

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：