检索结果-内蒙古大学图书馆

Valorization potential of coffee capsule waste: an updated bibliometric review

Environmental science and Pollution Research 2025年第4期32卷 1681-1692页

作者： dos Santos, Wallan Azevedo Holanda, José Nilson F. Postgraduate Program in Materials Science and Engineering Darcy Ribeiro Northern Fluminense State University RJ Campos Dos Goytacazes City28013-602 Brazil Laboratory of Advanced Materials Darcy Ribeiro Northern Fluminense State University RJ Campos Dos Goytacazes City28013-602 Brazil

In recent years, coffee capsule waste has been generated on an increasingly large scale worldwide, but disposing of it in an environmentally sustainable and economical manner still poses major challenges. This work maps the original scientific production focused on the valorization of coffee capsule waste through a bibliometric review based on scientific articles published in the last 10 years (from 2014 to 2024) in the Scopus database. The review identified different ways of valuing coffee capsule waste, including the development of composite materials, composting, energy production, jewelry and decorative items, and the construction of supercapacitors and sensors. Some significant aspects were also emphasized: (i) this subject has a high potential for further growth;(ii) the published articles considered only part of the components of the coffee capsule waste;and (iii) most of the published articles were based on laboratory-scale experiments. Thus, the valorization of coffee capsule waste requires even more development. To address these challenges, manufacturers, consumers, researchers, governments, and the recycling industry should make a joint effort to develop innovative solutions that enable the complete valorization of coffee capsule waste in an environmentally friendly way. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.

关键词： Circular economy

来源：评论

学校读者我要写书评

暂无评论

Correction: materials laboratories of the future for alloys, amorphous, and composite materials (MRS bulletin, (2025), 50, 2, (190-207), 10.1557/s43577-024-00846-y)

引用

MRS bulletin 2025年 1-2页

作者： banerjee, Sarbajit Meng, Y. Shirley Minor, Andrew M. Zhang, Minghao Zaluzec, Nestor J. Chan, Maria K.Y. Seidler, Gerald McComb, David W. Agar, Joshua Mukherjee, Partha P. Melot, brent Chapman, Karena Guiton, beth S. Klie, Robert F. McCue, Ian D. Voyles, Paul M. Robertson, Ian Li, Ling Chi, Miaofang Destino, Joel F. Devaraj, Arun Marquis, Emmanuelle A. Segre, Carlo U. Liu, Huinan H. Yang, Judith C. Momeni, Kasra Misra, Amit Abdolrahim, Niaz Medvedeva, Julia E. Cai, Wenjun Sehirlioglu, Alp Dizbay-Onat, Melike Mehta, Apurva Graham-brady, Lori Maruyama, benji Rajan, Krishna Warner, Jamie H. Taheri, Mitra L. Kalinin, Sergei V. Reeja-Jayan, b. Schwarz, Udo D. Simon, Sindee L. brown, Craig M. Department of Chemistry and Department of Materials Science & Engineering Texas A & M University College Station United States Pritzker School of Molecular Engineering The University of Chicago Chicago United States Department of Materials Science & Engineering University of California Berkeley Berkeley United States National Center for Electron Microscopy Molecular Foundry Lawrence Berkeley National Laboratory Berkeley United States Center for Nanoscale Materials Argonne National Laboratory Lemont United States Department of Physics University of Washington Seattle United States Department of Materials Science & Engineering The Ohio State University Columbus United States Department of Mechanical Engineering and Mechanics Drexel University Philadelphia United States School of Mechanical Engineering Purdue University West Lafayette United States Department of Chemistry University of Southern California Los Angeles United States Department of Chemistry Stony Brook University The State University of New York Stony Brook United States Department of Chemistry University of Kentucky Lexington United States Department of Physics University of Illinois at Chicago Chicago United States Department of Materials Science & Engineering Northwestern University Evanston Bangladesh Department of Materials Science & Engineering University of Wisconsin–Madison Madison United States Department of Materials Science and Engineering University of Pennsylvania Philadelphia United States Department of Mechanical Engineering and Materials Science Duke University Durham United States Department of Chemistry Creighton University Omaha United States Physical and Computational Sciences Directorate Pacific Northwest National Laboratory Richland United States Department of Materials Science & Engineering University of Michigan–Ann Arbor Ann Arbor United States Department of Physics Illinois Institute of Technology Chicago United States Department of Bioengineering and the Mater

This article was updated to correct Minghao Zhang’s affiliation from "Pritzker School of Molecular engineering, The University of Chicago, Chicago, USA" to "Pritzker School of Molecular engineering, The University of Chicago, Chicago, USA;Argonne National Laboratory, Lemont, USA." Argonne National Laboratory was left off the original publication. © The Author(s) 2025.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Stability and activity of nickel catalysts supported on diatomite for dry reforming of methane: Role of cerium and boron promoters

引用

Journal of the Energy Institute 2025年 120卷

作者： Azevedo, Amanda L. Melo, Dulce M.A. Silva, Yuri K.R.O. Oliveira, Ângelo A.S. Favacho, Vanessa S.S. Souza, Lalyson M.L.R. Rocha, Amanda R.C.C. braga, Renata M. Postgraduate Program in Chemistry Federal University of Rio Grande do Norte Natal Brazil Postgraduate Program in Materials Science and Engineering Federal University of Rio Grande do Norte Natal Brazil Postgraduate Program in Petroleum Science and Engineering Federal University of Rio Grande Do Norte Natal Brazil Agricultural School of Jundiaí Federal University of Rio Grande do Norte RN Macaíba Brazil

This study evaluates the activity and stability of nickel-based catalysts supported on diatomite and promoted with 1 or 2 wt% of cerium or boron for the dry reforming of methane (DRM). Diatomite, a naturally abundant and low-cost support, requires no complex synthesis procedures and remains relatively underexplored in DRM applications. Given the economic viability of using this material, the incorporation of promoters such as cerium and boron can enhance its catalytic properties, including resistance to coke formation, thermal stability, and activity at both low and high temperatures, thereby increasing its potential for industrial application. The support composition was analyzed by X-ray fluorescence (XRF), and its morphology was examined using scanning electron microscopy (SEM). The catalysts were characterized by SEM, X-ray diffraction (XRD), nitrogen physisorption, H2 temperature-programmed reduction (H2-TPR), thermogravimetric analysis (TGA), and Raman spectroscopy. The catalytic performance results indicated that cerium addition enhanced CO2 and CH4 conversion, with 2 wt% Ce-promoted catalyst stands out due to its significantly higher conversion rates and lower coke formation, as observed in TGA. The 2 wt% boron-promoted catalyst exhibited greater stability, with significant resistance to coke formation, despite showing lower CH4 conversion. SEM analysis revealed the presence of carbon filaments, particularly in the catalysts without boron, whereas boron-promoted catalysts showed reduced filamentous carbon formation. The activation energies derived from the Arrhenius plot further corroborate these findings, demonstrating that boron-promoted catalysts exhibited satisfactory performance at high temperatures (>800 °C), where the reaction is thermodynamically controlled. In turn, cerium-promoted catalysts achieved superior catalytic performance at ≤ 700 °C and performed similarly to boron-containing catalysts at higher temperatures. Therefore, both promoters impa

关键词： Thermogravimetric analysis

来源：评论

学校读者我要写书评

暂无评论

Increased corrosion resistance of steel substrates coated with epoxy resin/ZnO/Fe 2 O 3 obtained from electric arc furnace dust recovery

引用

Journal of materials Research and Technology 2025年 36卷 9462-9472页

作者： Mário Andrean Macedo Castro Tanara Caroline Nunes Nicácio Antonio Carlos do Nascimento Santos José Eudes Lima Santos Luis David Loor-Urgilés Antonio Eduardo Martinelli Fabiana Villela da Motta Mauricio bomio LSQM–Laboratory of Chemical Synthesis of Materials Department of Materials Engineering Federal University of Rio Grande do Norte – UFRN P.O. Box 1524 Natal RN Brazil Institute of Chemistry Federal University of Rio Grande do Norte 59078-970 Natal RN Brazil Postgraduate Program in Materials Science and Engineering Federal University of Rio Grande do Norte 59078-900 Natal RN Brazil

The sustainable management of metal-rich industrial wastes, such as electric arc furnace dust (EAFD), remains a critical challenge for the steel industry. Although previous studies have investigated metal recovery routes and their application in functional materials, few have explored the reuse of these wastes as active components in anticorrosive coatings. This work proposes an innovative approach for valorizing EAFD, recovering iron (Fe 2 O 3 ) and zinc (ZnO) oxides through acid leaching, basic precipitation, and heat treatment. After recovery, mixed ZnO/Fe 2 O 3 oxides were prepared in different proportions and incorporated as nanofillers in an epoxy matrix, creating a hybrid coating aimed at protecting carbon steel against corrosion. The obtained materials were characterized by XRF, XRD, FTIR, SEM, and bET analysis, while the mechanical and anticorrosive properties were evaluated by Vickers hardness tests, Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy. After 240 h of immersion in saline solution and 360 h of Salt-spray test, the coating with the highest Fe 2 O 3 content demonstrated superior performance, reducing the corrosion rate by up to 100 times and increasing the load transfer resistance by up to 80 times. The contribution of this study lies in both the proposal of a new cycle for reusing steel waste and in demonstrating a viable route for developing high-performance anticorrosive coatings with potential for industrial application in sectors such as oil and gas. The combination of waste recovery and functional improvement of the material positions this study as a technologically and environmentally relevant solution.

关键词： EAFD ZnO Fe 2 O 3 Epoxy resin Anti-corrosive coatings

来源：评论

学校读者我要写书评

暂无评论

Thermo-optical properties of erbium-doped germanate-bismuth glasses

引用

Optical materials 2025年 166卷

作者： Silva, Adriano Almeida Lima, Lucas batista Silva da Silva, Isis Lee Garcia, Hans Anderson bell, Maria José Valenzuela Kassab, Luciana Reyes Pires Santos, Francisco Eroni Paz Postgraduate Program in Physics Federal University of Piauí PI 64049550 Brazil Department of Physics Federal University of Juiz de Fora MG Juiz de Fora36036-900 Brazil Faculdade de Tecnologia São Paulo CEETEPS SP São Paulo01124060 Brazil Postgraduate Program in Engineering and Materials Science Federal University of Teresina PI 64049550 Brazil

In this study, we investigate the thermo-optical properties of GeO2–bi2O3 glasses doped with different concentrations of rare earth ions by thermal lens technique;UV-VIS and photoluminescence (PL) spectroscopy, as well as measurements of thermal diffusivity, thermal conductivity and quantum efficiency, are presented aiming at potential photonic applications. High infrared fluorescence lifetimes around 4 ms and quantum efficiencies of ∼80 % for 1 % Er3+ concentration, determined via lifetime and thermal lens methods, enabled efficient laser operation. Positive ds/dT values confirmed the self-focusing nature beneficial for high-power systems. While quantum efficiencies decreased exponentially with rising Er3+ due to non-radiative relaxation from erbium-matrix interactions, reasonably high efficiencies above 74 % persisted at 1 % doping. The thermal diffusivity and conductivity exhibited little changes with varying Er3+ concentration and showed to be matrix dependent. © 2025 Elsevier b.V.

关键词： Quantum efficiency

来源：评论

学校读者我要写书评

暂无评论

Coupled effects of morphology/length scale of the microstructure and microsegregation on the corrosion behaviour of a single-phase Zn-1wt%Cu alloy

Next Materials

引用

Next materials 2025年 8卷

作者： Miranda, Romulo S. Vida, Talita Ligeiro, Henrique S. Cheung, Noé Simões, Fábio R. Garcia, Amauri brito, Crystopher Postgraduate Program in Engineering São Paulo State University Guaratinguetá Brazil Department of Aeronautical Engineering School of Engineering/São Paulo State University São João da Boa Vista Brazil Department of Manufacturing and Materials Engineering University of Campinas Campinas Brazil Institute of Marine Science Federal University of São Paulo Santos Brazil

Zn-Cu alloys are promising for biomaterials due to their unique properties. Unlike most metallic alloys, Zn-Cu exhibits a partition coefficient greater than 1, leading to solvent segregation. This study aims to explore how microsegregation and cellular microstructure affect the corrosion behaviour of a Zn-1wt%Cu alloy. Three specimens, with cellular spacings of approximately 8, 16, and 32 µm, were extracted from a directionally solidified casting. Electrochemical Impedance Spectroscopy and Potentiodynamic Polarization techniques were used to assess the corrosion performance in NaCl solutions. The results showed that coarser cellular structures demonstrated higher corrosion resistance, evidenced by greater charge transfer resistances and lower current densities. Corrosion initiated at the Cu-poor cellular boundaries, acting as anodic regions, and became more severe in finer microstructures. In contrast, larger cells with fewer boundaries exhibited less generalised corrosion, confirming that microstructural coarsening improves corrosion resistance. © 2025 The Authors

关键词： biodegradable Zn-Cu alloys Corrosion behaviour in NaCl Electrochemical performance of biomaterials Galvanic corrosion mechanisms Microstructural refinement

来源：评论

学校读者我要写书评

暂无评论

Effects of Incident Angle on Single-Event Leakage Current Degradation in Heavy-Ion Irradiated 1800 v and 4500 v SiC Power MOSFETs

引用

IEEE Transactions on Nuclear science 2025年

作者： Sengupta, A. Martinella, C. ball, D.R. Niskanen, K. Senarath, A.S. Islam, S. Harris, P.M. Hutson, J.M. Osheroff, J.M. Sternberg, A.L. Kettunen, H. Kosier, S.L. Grossner, U. Javanainen, A. Galloway, K.F. Schrimpf, R.D. Witulski, A.F. Zürich8092 Switzerland Vanderbilt University Interdisciplinary Materials Science Program NashvilleTN37235 United States Lipscomb University Electrical and Computer Engineering Department NashvilleTN37204 United States NASA/GSFC Code 561.4 GreenbeltMD20771 United States Vanderbilt University Electrical Engineering and Computer Science Department B 351825 NashvilleTN37235 United States University of Jyväskylä Department of Physics Jyväskylä40014 Finland

Experimental heavy-ion responses of two variants of SiC power MOSFETs are evaluated. The devices have similar epitaxial thickness but different doping. The higher doping in the epitaxial region results in lower breakdown voltage, and typically leads to a lower threshold drain voltage at which single-event leakage current (SELC) occurs. Furthermore, the heavy-ion-induced SELC degradation in the drain and gate currents of the SiC MOSFETs exhibit a strong dependence on the heavy-ion's angle of incidence. The devices' behavior significantly alters when irradiated with heavy-ions at different incident angles under the same fixed bias and total fluence, as also confirmed by 3-D Technology Computer Aided Design (TCAD) simulations. © 1963-2012 IEEE.

关键词： Power MOSFET

来源：评论

学校读者我要写书评

暂无评论

Performance of atrial conduction velocity algorithms with error-prone clinical measurements for the identification of atrial fibrosis

引用

Computers in biology and Medicine 2025年 191卷 110119-110119页

作者： Gharaviri, Ali Vigneswaran, Vinush Vickneson, Keeran Roney, Caroline Corrado, Cesare Coveney, Sam Maciunas, Kestutis bodagh, Neil Klis, Magda Kotadia, Irum Sim, Iain Whitaker, John bishop, Martin Niederer, Steven O'Neill, Mark Williams, Steven E. Centre for Cardiovascular Science The University of Edinburgh United Kingdom School of Biomedical Engineering and Imaging Sciences King's College London United Kingdom School of Engineering and Materials Science Queen Mary University of London United Kingdom National Heart & Lung Institute - Faculty of Medicine Imperial College London United Kingdom Heart Rhythm Research Brussels Postgraduate Program in Cardiac Electrophysiology and Pacing Vrije Universiteit Brussel Brussels Belgium Heart Rhythm Management Centre Universitair Ziekenhuis Brussel Brussels Belgium Brussels1050 Belgium

Introduction: Measuring conduction velocity, as a direct consequence of fibrosis, may provide a better method to localise fibrotic regions. This study aims to assess established cardiac conduction velocity calculation methods (Triangulation, Polynomial Surface Fitting, and Radial basis Function) in identifying areas of conduction slowing caused by fibrosis, considering realistic measurement errors. Method: Using a human left atrium computational model, atrial activation was simulated. Each conduction velocity calculation method's performance was evaluated under uncertainties in mapping point density, local activation time assignment and electrode locations by comparing calculated conduction velocity to ground truth conduction velocity derived from high-resolution simulated atrial activation. Results: All methods agreed well with ground truth conduction velocity maps in noise-free, high-density sampling conditions. However, Triangulation and Polynomial Surface Fitting methods showed susceptibility to noise, exhibiting significant errors under moderate to high noise levels. Radial basis Function method demonstrated greater robustness to noise and reduced sampling density. Fibrotic region identification accuracy was high under ideal conditions for all methods but declined with increasing noise, with the Radial basis Function method maintaining superior performance. Conclusion: While all methods accurately estimate conduction velocity under ideal conditions, the Radial basis Function method shows robustness to a realistic clinical noise, hence making it the most suitable to identify fibrotic regions. © 2025

关键词： Triangulation

来源：评论

学校读者我要写书评

暂无评论

Study of doxorubicin release carried out by pH-responsive chitosan-alginate hydrogels

引用

Journal of Molecular Liquids 2025年 429卷

作者： Oliveira, Thayane Portela da Silva, Jhaemely Gabrielly Vieira Costa, Paloma Maia de Oliveira, Maykol Christian Damasceno Coelho, Ronaldo Cunha Santos Nascimento, Ariane Maria Silva Silva-Filho, Edson Cavalcanti dos Santos, Francisco Eroni Paz Muniz, Edvani Curti Postgraduate Program in Engineering and Materials Science Federal University of Piauí PI Teresina64049550 Brazil Physics Department Federal University of Piauí PI Teresina64049550 Brazil Department of Teacher Training Instituto Federal do Piauí PI Teresina64053-390 Brazil Chemistry Department Federal University of Piauí PI Teresina64049550 Brazil Chemistry Department State University of Maringá PR Maringá87020-900 Brazil

The use of polysaccharides in drug delivery systems has attracted increasing interest due to their functional properties. Among these, alginate (ALG) and chitosan (CH) are promising candidates for sustained drug delivery as they respond to pH, ensuring that the compound is released in a desired area. In this research physical hydrogels based on alginate and chitosan (ALG/CH) were prepared by varying the synthesis parameters (ALG at ALG/CH ratio, pH and speed stirring) and the effects of such parameters on hydrogels’ chemical and physical structure were accessed through several techniques. Also, the effects synthesis parameters on fractional release (Fmax), half time (t1/2) and percentage encapsulation efficiency (EE%), as the evaluated responses, were statically measured using a factorial design. Analysis through Raman and FTIR spectroscopies revealed the modes and bands corresponding to the precursors, confirming the formation of physically cross-linked hydrogels. The porous structure of the materials was confirmed by scanning electron microscopy (SEM). The swelling capacities of the hydrogels were analyzed at different pHs (5.4 and 7.4) and demonstrated that absorption increases in slightly acidic media. TG/DTG and Micro-CT analyzes of the sample with the greatest swelling showed that the degradation of the hydrogel occurs in two endothermic events and that the material possesses several sized and interconnected pores. The doxorubicin (DOX) release study showed that the release rate is higher as the higher proportion of CH relative to ALG. The factorial design analysis indicated the statistically significant factors in the DOX release tests. Thus, the results suggest that ALG/CH hydrogels can be tuned during their preparation to achieve optimal structure for pH-responsive to be applied for DOX releasing system. © 2025 Elsevier b.V.

关键词： Microgels

来源：评论

学校读者我要写书评

暂无评论

Understanding the effect of preparation technique and compaction pressure on the microstructure, sinterability and mechanical properties of the Cu-20 wt% WC composite prepared with recycled WC

Journal of Alloys and Compounds Communications

引用

Journal of Alloys and Compounds Communications 2025年 6卷

作者： Rafael A. Raimundo Franciné A. Costa Marco A. Morales Daniel A. Macedo Angelus G.P. Silva Uílame U. Gomes Federal University of Paraíba Department of Materials Science and Engineering João Pessoa PB 58051-900 Brazil TEMA – Centre for Mechanical Technology and Automation Department of Mechanical Engineering University of Aveiro Aveiro 3810-193 Portugal Mechanical Engineering Postgraduate Program UFRN Natal 59078-970 Brazil Department of Theoretical and Experimental Physics UFRN Natal 59078-970 Brazil Materials Science and Engineering Postgraduate Program UENF Campos dos Goytacazes 28015-620 Brazil Materials Science and Engineering Postgraduate Program UFRN Natal 59078-970 Brazil

The study investigated the impact of different preparation techniques (Mechanical Mixing - MM and High Energy Milling - HEM) and compaction pressures on the microstructure, sinterability and mechanical properties of the Cu-20 %WC composite using recycled WC. The results indicated that HEM promotes greater homogeneity, dispersion and refinement of the WC phase in copper, resulting in denser and more uniform microstructures after sintering. Although higher pressures increased the density of green compacts, they reduced densification during sintering, especially for powders prepared by MM, due to the segregation of the Cu and WC phases. On the other hand, compacts sintered with HEM powders prsented higher Vickers microhardness and better magnetic properties, attributed to the uniform distribution of WC particles and the increase in the interaction between the phases. Furthermore, the study highlights the influence of metallic impurities (Fe, Co and Ni) on the magnetic properties of the composite materials.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：