检索结果-内蒙古大学图书馆

SSRN 2022年

作者： Liu, Jing Hu, Erjiang Zheng, Weilin Zeng, Wen Chang, Yachao State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Shangxi Xi’an710049 China Liaoning Key Lab of Advanced Test Technology for Aerospace Propulsion System Shenyang Aerospace University Liaoning Shenyang110136 China Key Laboratory of Ocean Energy Utilization and Energy Conservation Ministry of Education Dalian University of Technology Dalian116024 China

By combining the reaction class-based global sensitivity analysis (RC-GSA) methodology, species sensitivity analysis (SSA) methodology, decoupling method and genetic algorithm (GA), a reduced reaction mechanism of the surrogate fuel (10% n-dodecane/14% n-decane/30% iso-hexadecane/36% methylcyclohexane/10% toluene, in mole fraction) for RP-3 kerosene was constructed. As an example, the detailed construction process of skeleton mechanism of methylcyclohexane (MCH) was presented, and the skeleton mechanism constructions of other components in the surrogate fuel were similar to that of MCH. First, the dominant reaction classes in the fuel-relevant mechanism of MCH were recognized by the RC-GSA, the representative species in each retained reaction classes were selected by the SSA, and the skeleton fuel-relevant mechanism of MCH was developed. Second, through combining the skeleton fuel-relevant mechanism of MCH with the reduced reaction mechanism of C 0 -C 3 by the decoupling method, the initial skeleton mechanism of MCH was obtained. Third, based on the GA, the rate constants of fuel-relevant reactions in the initial skeleton mechanism of MCH were optimized to enhance the prediction performance. Finally, by coupling the skeleton reaction mechanisms of n-dodecane, n-decane, toluene, iso-hexadecane, MCH, and the reduced reaction mechanism of C 0 -C 3 , a reduced mechanism (containing 121 species and 469 reactions) of the surrogate fuel for RP-3 kerosene was formed. The predicted main species concentrations during the oxidation process in the jet-stirred reactor, the ignition delay times in the shock tube and laminar flame speeds in the constant volume bomb by this reduced mechanism are in good agreement with the corresponding experimental data of RP-3 kerosene. © 2022, The Authors. All rights reserved.

关键词： Sensitivity analysis

来源：评论

学校读者我要写书评

暂无评论

Capacitance probe for water holdup measurement in crude oil-water flows

引用

Measurement: Sensors 2020年 10-12卷

作者： Zheng, Xuebo Yang, Bo Bai, Bofeng State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

Water holdup in crude oil-water flows is a crucial parameter to identify flow patterns or monitor the flow process in oil production. It has been increasingly important to accurately predict water holdup. Due to the simple structure and robust performance, capacitance probes have been widely used in experimental research and industrial application. In this paper, we proposed a water holdup measurement device based on a capacitance probe for crude oil-water flows. The measurement principle lies in the fact that the output capacitance is proportional to the part of the probe immersed in water. It was found that when inserted into crude oil, the surface of the probes will absorb hydrocarbons and form an oil film covering the probes. The formed oil film will reduce the sensitivity of the output capacitance to the water layer height. The thicker the film the lower the sensitivity. We examined the parameters that affect the thickness of the formed oil film and found that the thickness is mainly dependent on temperature and water holdup. The higher the temperature the thinner the formed oil film. The reason is that an increase of temperature leads to a decrease of viscosity. In addition, as the temperature approached about 50 °C, the thickness is nearly unchanged. As for the water holdup, at low temperatures the effect is considerable. At relatively high temperatures, the effect is minor and can be neglected. The experimental results showed that the capacitance probes have the highest sensitivity at about 50 °C. We designed and manufactured a prototype of the measurement device. The probes were inserted with heating wires to heat the crude oil near the probes and the current was controlled by an integrated circuit to maintain the temperature at about 50 °C. The field test showed that the natural gas entrained in the production fluids caused the device to under-predict the water holdup. After gas-liquid separation, the prediction errors were within ±6%. © 2020 The Author

关键词： Crude oil

来源：评论

学校读者我要写书评

暂无评论

Influence of Different Equations of State on Simulation Results of Supercritical CO_(2) Centrifugal Compressor

引用

Mechanical engineering Science 2021年第2期3卷 25-33页

作者： Yueming YANG Bingkun MA Yongqing XIAO Jianhui QI Shandong Engineering Laboratory for High-efficiency Energy Conservation and Energy Storage Technology&Equipment School of Energy and Power EngineeringShandong UniversityJinanChina Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy Utilization North China Electric Power UniversityBeijingChina

Supercritical CO_(2)(SCO_(2))Brayton cycle has received more and more attention in the field of power generation due to its high cycle efficiency and compact ***_(2) compressor is the core component of the cycle,and the improvement of its performance is the key to improving the efficiency of the entire ***,the operation of the SCO_(2) compressor near the critical point has brought many design and operation *** on the Reynolds Averaged Navier-Stokes(RANS)model,the performance and flow field of SCO_(2) centrifugal compressors based on different CO_(2) working fluid models are numerically investigated in this *** stability and convergence of the compressor steady-state simulation are also *** results show that the fluid based on the Span-Wanger(SW)equation can obtain a more ideal compressor performance curve and capture a more accurate flow field structure,while the CO_(2) ideal gas is not suitable for the calculation of SCO_(2) centrifugal *** its flow field can be used as the initial flow field for numerical calculation of centrifugal compressor based on CO_(2) real gas.

关键词： Supercritical CO_(2) Centrifugal compressor Near the critical point Compressor performance Real gas equation of state

来源：评论

学校读者我要写书评

暂无评论

Phosphorus Flame Retardant Modified Aramid Nanofiber Separator for Advanced Safety Lithium-Sulfur Batteries

SSRN

引用

SSRN 2024年

作者： Liu, Jianwei Zhu, Lei Wang, Jianan Chai, Qinqin Sun, Shiyi Chen, Xin Wang, Xue Zhang, Yating Yan, Wei College of Chemistry and Chemical Engineering Xi’an University of Science and Technology Shaanxi Xi’an710054 China Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiao tong University Shaanxi Xi’an710049 China Xianggui Manganese Industry Co. Ltd. Shaanxi Province Ziyang County725300 China School of Physics and Electrical Engineering Weinan Normal University Shaanxi Weinan714099 China Xi'an Hantang Analysis & Test Co. Ltd Xi’an710201 China

Safety concerns have perennially impeded the large-scale implementation of high-energy-density storage systems. Nevertheless, because the intrinsic drawbacks of the commercial polyolefin separator are poor thermal stability and low flammability with a large thermal contribution, the development of an advanced separator that solves the above questions is imminent. In this work, gradient flame-retardant aramid nanofiber separators (T-PMIA) were synthesized by a single-step electrospinning method. The T-PMIA separator demonstrates excellent Li-ion diffusion and proficiently suppresses the "shuttle effect" through its plentiful multilevel beaded structure and robust anchoring of soluble polysulfides (Li2Sx), achieved by optimizing the functional groups P and -P-O. Moreover, the enhanced separator exhibits a rapid self-extinguishing feature (self-extinguishing time: 0.20 s) and impressive mechanical properties (tensile strength of up to 12.58 MPa and puncture force of 0.94 N). Accordingly, the T-PMIA separator still showed a stable cycling performance (maintain 901.7 mAg-1 after 100 cycles) even at high temperature (80 ℃). This simple separator strategy offers a highly competitive option for the large-scale production of high-safety lithium-sulfur (Li-S) batteries. This uncomplicated separator strategy presents a compelling solution for the large-scale production of high-safety lithium-sulfur (Li-S) batteries © 2024, The Authors. All rights reserved.

关键词： Separators

来源：评论

学校读者我要写书评

暂无评论

The formation of droplet encapsulating particles in a Y-typed microchannel

引用

Measurement: Sensors 2021年 14卷

作者： Wang, Qing Liu, Qi Fan, Liang-Liang Zhao, Liang School of Mechanical Engineering Xi'an Jiaotong University Xi'an China School of Food Equipment Engineering and Science Xi'an Jiaotong University Xi'an China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

Droplet encapsulating particles has great potentials in microfluidic measurement and detection in many fields, such as biomedicine and food science. It is of great importance to investigate the formation of droplet encapsulating particles in microchannel. In this paper, considering the influence of channel angle, particle size, and volume fraction, VOF model and DPM model are combined to systematically study the formation of droplet containing particles in a Y-typed microchannel. The simulation results show that the particle size and concentration significantly influence the formation of droplet. In addition, in comparison with the formation of simple droplet, the angle of Y-typed microchannel and particles have synergistic effect on the droplet formation. The present work is of help for the precise control on the formation of droplet encapsulating particles, which is highly required for the following measurement and detection. © 2021 The Author(s)

关键词： Microchannels

来源：评论

学校读者我要写书评

暂无评论

Theoretical Analysis on the Lifetime of Sessile Droplet Evaporation

Theoretical Analysis on the Lifetime of Sessile Droplet Evap...

引用

作者： Shen, Yang Cheng, Yongpan Xu, Jinliang Zhang, Kai Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy North China Electric Power University Beijing102206 China School of Energy Power & Mechanical Engineering North China Electric Power University Beijing102206 China

There are two stages for a sessile droplet evaporation on the solid substrate, one is the "constant contact radius" (CR) mode, the other is the "constant contact angle" (CA) mode. In this paper, the theoretical model is built up for sessile droplet evaporation for the two modes, the lifetime of evaporating droplet is obtained under different initial contact radius, initial contact angle and critical contact angle for mode transition. It is found that in the CR mode, the variation of initial contact angle is nonlinear with the time. For both CR and CA modes the lifetime is proportional to R02 (R0 is the initial contact radius of droplet) for two modes. When the critical contact angle for mode transition from CR to CA is increased, the lifetime for CR mode is decreased while the lifetime for CA mode is increased, and the overall lifetime is also increased. This result may be of great significance for sessile droplet evaporation. © Springer Nature Switzerland AG 2020.

关键词： Evaporation

来源：评论

学校读者我要写书评

暂无评论

Fluoride-Salt-Cooled High-Temperature Reactor: An Integrated Nuclear-Based Energy Production and Conversion System

SSRN

引用

SSRN 2023年

作者： Zhang, Dalin Li, Xinyu Jiang, Dianqiang Zhou, Xingguang Lv, Xindi Yun, Shichang Wu, Wenqiang He, Xuanang Li, Haoyang Min, Xin Chen, Kailong Tian, Wenxi Qiu, Suizheng Su, G.H. Zhao, Quanbin Fu, Yao Tang, Chuntao Zhuo, Wenbin Li, Jinggang Zuo, Jiaxu State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi’an Jiaotong University Xi’an710049 China Shanghai Institute of Applied Physics Chinese Academy of Sciences Shanghai201800 China Shanghai Nuclear Engineering Research & Design Institute CO. LTD. Shanghai200233 China CNNC Key Laboratory on Nuclear Reactor Thermal Hydraulics Technology Nuclear Power Institute of China Chengdu610213 China China Nuclear Power Technology Research Institute Guangdong Shenzhen518000 China Nuclear and Radiation Safety Center Ministry of Ecology and Environment People's Republic of China Beijing100082 China

Based on the analysis of energy structure and the development trends of advanced nuclear energy technology, combining the complementary advantages of nuclear energy and other energy sources in China, the Fluoride-salt-cooled High-temperature Reactor(FuSTAR) system has been proposed. FuSTAR system is designed to address production capacity issues in areas with energy shortages or resource concentration and can be combined with high-temperature process heat to achieve high-value-added processes such as hydrogen production. In this paper, the Tri-structural isotropic fuel combined with helical cruciform elements has been studied in detail on the neutron physics and thermal-hydraulic properties, and the flow and heat transfer experiment is carried out for the first time. The multilayer nonlinear programming method has been applied to the design of thermal transport systems. Then the optimal parameters and configuration of the thermoelectric conversion system are obtained by the superstructure optimization method. The inherent safety of FuSTAR is demonstrated through deterministic safety analysis. In addition, the iodine-sulfur cycle technology and the characteristics of tritium production are also analyzed. This study highlights the significant potential of integrating nuclear energy with other energy sources in an optimized energy-production system. © 2023, The Authors. All rights reserved.

关键词： Nonlinear programming

来源：评论

学校读者我要写书评

暂无评论

Physics-Based Probabilistic Assessment of Creep-Fatigue Failure for Pressurized Components by Extended Direct Steady Cycle Analysis-Driven Neural Network

SSRN

引用

SSRN 2022年

作者： Wang, Xiaoxiao Ma, Zhiyuan Yang, Jie Chen, Haofeng Xuan, Fuzhen Department of Mechanical & Aerospace Engineering University of Strathclyde James Weir Building 75 Montrose Street GlasgowG1 1XJ United Kingdom Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai200093 China School of Mechanical and Power Engineering East China University of Science and Technology Shanghai200237 China

To achieve a high-reliability design with a feasible balance between accuracy and efficiency, the physics-based probabilistic assessment for creep-fatigue failure is proposed under the probabilistic Linear Matching Method (pLMM) framework. At the physical level, the structural failure mechanism is reflected in the prepared training database, which is generated by the direct method, extended Direct Steady Cycle Analysis (eDSCA) procedures. And to efficiently express the relationship between design parameters and structural responses implicitly, the extended DSCA-driven neural network (EDDNN) is built with the superior fitting quality of damage and lifetime. With the benchmarks of pressurized structures provided, the applicability of the proposed probabilistic analysis approach in solving practical problems is demonstrated, where the reliability-based evaluation diagram is established according to different requirements. Furthermore, a novel data classification scheme is proposed to deal with the randomness in creep damage-dominated probabilistic assessment. © 2022, The Authors. All rights reserved.

关键词： Failure (mechanical)

来源：评论

学校读者我要写书评

暂无评论

Comparison of Gelatinous and Calcined Magnesia Supported Ni or/And Co-Based Catalysts for Aqueous Bioglycerol Phase Reforming

SSRN

引用

SSRN 2021年

作者： Liu, Dashuai Dou, Binlin Zhang, Hua Wu, Kai Zhao, Longfei Zeng, Pingchao Chen, Haisheng Xu, Yujie School of Energy and Power Engineering Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology Shanghai200093 China Institute of Engineering Thermophysics Chinese Academy of Sciences Beijing100190 China

In this study, glycerol aqueous phase reforming was carried out in a batch reactor. The gases produced were H2, CO, CH4, and CO2 during the experiment. The catalysts used included Ni or/and Co catalysts supported by MgO. Meanwhile, two different MgO supporters were prepared by the sol-gel method and calcining method, and the active metal was added by an initial wet impregnation (IWI) method. The catalysts were characterized by BET, BJH, TEM, and XRD. In order to achieve the purpose of comparison, the activity of different types of catalysts was tested under similar conditions. It was found that the amount of hydrogen produced by the catalyst containing gelatinous MgO supporter is more than 1.5 times that of other catalysts, and the Ni-Co-MgO had the best catalytic effect among the same types of catalysts. The activity of the Ni-Co-MgO catalyst was tested under different temperatures, concentrations, and CaO conditions. We found that Ni-Co bimetallic catalyst supported on gelatinous MgO has the best highest gas production, while the catalyst containing calcined MgO support usually has a better hydrogen selectivity. Through the stability study of the Ni-Co-MgO catalyst, we found that the bimetallic catalyst supported by gelatinous MgO support has better catalytic stability. © 2021, The Authors. All rights reserved.

关键词： Sol-gel process

来源：评论

学校读者我要写书评

暂无评论

RECENT ADVANCES OF SURFACE WETTABILITY EFFECT ON flow BOILING HEAT TRANSFER PERFORMANCE

引用

Frontiers in Heat and Mass Transfer 2021年 17卷

作者： Cao, Shuang Yang, Hui Zhao, Luxing Wang, Tao Xie, Jian School of Energy and Power Engineering Zhengzhou University of Light Industry Zhengzhou450002 China Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy Utilization North China Electric Power University Beijing102206 China

flow boiling heat transfer is an effective way to fulfill the energy transfer. The wettability of boiling surface influences the liquid spreading ability and the growth, departure, and release frequency of bubbles, which determines the heat transfer performance. According to the wettability and combination forms, boiling surface are classified into weak wetting surface, strong wetting surface, and heterogeneous wetting surface. Fabricating by physical, chemical method or coating the original surface with a layer of low surface energy, the weak wetting surface has more effective activation point and nucleation center density to improve heat transfer performance at low heat flux. The strong wetting surface always formed by physical or chemical treatment to enhance the rapid rewetting of the wall surface. It has a smaller bubble separation diameter, higher separation frequency and higher CHF. The heterogeneous wetting surface, having the synthetic effects of the strong and weak surface wettabilities, is a hot issue of recent study. But its composition and heat transfer enhancement mechanism are very complicated which need to study thoroughly. Furthermore, the intelligent wetting surface, having the dynamics wettability function, is also briefly analyzed in this paper. Despite the advances in this aspect, the boiling surfaces can be further optimized by fabricate effective wettability to achieve a strong stability, high heat transfer performance and realize the synergistic effect of flow pattern and heat transfer. © 2021, Global Digital Central. All rights reserved.

关键词： Wetting

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：