检索结果-内蒙古大学图书馆

中国化学会第三届中国能源材料化学研讨会

作者： Ling Wang Guorui Yang Jianan Wang Silan Wang Wei Yan Department of Environmental Science and Engineering State Key Laboratory of Multiphase Flow in Power EngineeringXi'an Jiaotong University Xi'an Jiaotong University Suzhou Institute

Sodium-ion batteries（SIBs） have attracted great attention as one of the potential and promising alternatives to Lithium-ion batteries（LIBs） due to the similar chemical mechanism and abundance of sodium ***,the sluggish reaction kinetics and large volume expansion limit its practical ***,we synthesized continuous branched TiO/C nanofibers（BT/C NFs） via in-situ growth,

关键词： Synthesis of Branched TiO2/C Nanofibers and Sodium-ion Storage Performance TiO

来源：评论

学校读者我要写书评

暂无评论

New model for measuring stratified gas-liquid flow by Chisholm-model-based V-cone flowmeter

引用

Huagong Xuebao/CIESC Journal 2018年第8期69卷 3428-3435页

作者： He, Denghui Chen, Senlin Bai, Bofeng State Key Laboratory of Eco-hydraulic in Northwest Arid Region Xi’an University of Technology Xi'anShaanxi710048 China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi'anShaanxi710049 China

Large errors are usually observed when Chisholm model is used in V-cone flowmeter to measure stratified gas-liquid flow rate. Three V-cone flowmeters with throttle ratios of 0.55, 0.65 and 0.75 were used to study stratified gas-liquid flowat gas volume fraction of more than 95%. The effects of gas and liquid flow rates, operating pressure and throttle ratio on correction factor C of the Chisholm model were analyzed and new modelfor measuring stratified gas-liquid flow was developed. Correction factor C was monotonically decreased with increase of Lockhart-Martinelli, XLM, but was hardly affected by pressure and the gas densiometric Froude number. However, C was somehow affected by throttle ratio. The relationship between C and XLM was obtained and new models for three V-cone flowmeters to measure stratified flow were developed. The relative standard error of the predicted gas flow rate was with ±3.0% for V-cone flowmeters with throttle ratios of 0.55 and 0.65 under confidence level of 94.6% and 88.6%, respectively, while that was with ±4.0% under 91.7% confidence level forV-cone flowmeter with throttle ratio of 0.75. © All Right Reserved.

关键词： Two phase flow

来源：评论

学校读者我要写书评

暂无评论

Preparation of hierarchical Cd1-xZnxS/NiTiO3 Nanofibers and Their Photocatalytic Hydrogen Generation Activity

Preparation of hierarchical Cd1-xZnxS/NiTiO3 Nanofibers and ...

引用

中国化学会第三届中国能源材料化学研讨会

作者： Silan Wang Ling Wang Guorui Yang Jianan Wang Wei Yan Department of Environmental Science and Engineering State Key Laboratory of Multiphase Flow in Power EngineeringXi'an Jiaotong University Xi'an Jiaotong University Suzhou Institute

Solar-driven photocatalytic water splitting for hydrogen production represents an environmentally friendly and economically viable approach to store solar *** heterojuction is an effective strategy to improve the photocatalytic ***,most of the reported heterjunction were built based on the photocatalyst with wide band gap,such as TiO,

关键词： Preparation of hierarchical Cd1-xZnxS/NiTiO3 Nanofibers and Their Photocatalytic Hydrogen Generation Activity

来源：评论

学校读者我要写书评

暂无评论

Fabrication of Cd1-xZnxS modified TiO2 Nanofibers and Their Photocatalytic Water Splitting Activity

Fabrication of Cd1-xZnxS modified TiO2 Nanofibers and Their ...

引用

中国化学会第三届中国能源材料化学研讨会

作者： Guorui Yang Ling Wang Silan Wang Jianan Wang Wei Yan Department of Environmental Science and Engineering State Key Laboratory of Multiphase Flow in Power EngineeringXi'an Jiaotong University Xi'an Jiaotong University Suzhou Institute

Photocatalytic water splitting for H evolution based on sunlight represents one of the most promising approaches for renewable energy ***,the hierarchically heterostructured CdZnS/TiO with visible-light response were *** found that the crystallinity of the substrate nanofinbers play a key role in promoting the photocatalytic performance.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Energy and exergy recovery from exhaust hot water using organic Rankine cycle and a retrofitted configuration

引用

Journal of Central South University 2018年第6期25卷 1464-1474页

作者： SUN Wen-qiang YUE Xiao-yu WANG Yan-hui CAI Jiu-ju Department of Thermal Engineering School of MetallurgyNortheastern UniversityShenyang 110819China State Environmental Protection Key Laboratory of Eco-Industry Northeastern UniversityShenyang 110819China State Key Laboratory of Multiphase Flow in Power Engineering Xi＇an Jiaotong UniversityXi＇an 710049China ~ Central South University Press and Springer-Verlag GmbH Germanypart of Springer Nature 2018

Exhaust hot water （EHW） is widely used for various industrial processes. However, the excess heat carried by EHW is typically ignored and discharged into the environment, resulting in heat loss and heat pollution. An organic Rankine cycle （ORC） is an attractive technology to recycle heat from low-temperature energy carriers. Herein, ORC was used to recycle the heat carried by EHW. To investigate the energy and exergy recovery effects of EHW, a mathematical model was developed and a parametric study was conducted. The energy efficiency and exergy efficiency of the EHW-driven ORC system were modeled with R245fa, Rl13 and R123 as the working fluids. The results demonstrate that the EHW and evaporation temperatures have significant effects on the energy and exergy efficiencies of the EHW-driven ORC system. Under given EHW conditions, an optimum evaporation temperature exists corresponding to the highest exergy efficiency. To further use the low-temperature EHW, a configuration retrofitted to the ORC by combining with flash evaporation （FE） was conducted. For an EHW at 120 ~C and 0.2 MPa, the maximum exergy efficiency of the FE-ORC system is 45.91% at a flash pressure of 0.088 MPa. The FE-ORC performs better in exergy efficiency than the basic FE and basic EHW-driven ORC.

关键词： exhaust hot water （EHW） organic Rankine cycle （ORC） energy efficiency exergy efficiency flashevaporation （FE）

来源：评论

学校读者我要写书评

暂无评论

Estimation of likely accident progression at Fukushima Daiichi unit 2

Estimation of likely accident progression at Fukushima Daiic...

引用

2017 Transactions of the American Nuclear Society, ANS 2017

作者： Li, Gen Zhang, Jun Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

来源：评论

学校读者我要写书评

暂无评论

Time-domain study on the density wave oscillation of supercritical water in multiple parallel channel system 17

Time-domain study on the density wave oscillation of supercr...

引用

17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2017

作者： Liu, Jialun Zhang, Qian Li, Huixiong Kong, Xiangfei Lei, Xianliang State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi'anShaanxi China

A time-domain model suitable for the study on the density wave instability of supercritical water in multiple parallel channel system (the number of channels is more than 2) was established. The present model developed an iterative solution to solve the coupling among parallel channels. Then the program was verified by the experimental data obtained in open literature. After that, the model was used to study the effect of system pressure (23-28 MPa), inlet fluid temperature (240-350 °C), and adding perturbation in different channels on the density wave instability of supercritical water in multiple parallel channel system. It was found that when the same perturbation was added on some of channels at the initial time (the other working conditions were kept unchanged), the number of perturbation channels had almost no effect on the oscillation period and the system stability. The stability of the multiple channel system increased with the increasing in system pressure. It was also found that a critical value about the inlet fluid temperature, denoted by Tin-cr, existed, and when the inlet fluid temperature was lower than the critical value Tin-cr, the stability of the multiple channel system dropped with the increase of inlet fluid temperature, and that was improved when inlet fluid temperature was higher than Tin-cr. The critical value Tin-cr increased gradually with the increasing in the amount of parallel channels. Moreover, Tin-cr was lower than and near the pseudo-critical temperature of supercritical water, and almost had no changes with varying system pressure. © 2016 Association for Computing Machinery Inc. All Rights Reserved.

关键词： System stability

来源：评论

学校读者我要写书评

暂无评论

Mixed convective heat transfer of supercritical carbon dioxide flowing in a vertically-upward tube with low mass flux 17

Mixed convective heat transfer of supercritical carbon dioxi...

引用

17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2017

作者： Zhang, Qian Li, Huixiong Liu, Jialun Zhang, Jun Lei, Xianliang State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi'an Shaanxi China

Experimental investigation was carried out to study heat transfer characteristics of supercritical CO2 at low mass flux conditions. A vertical tube with an inner diameter of 16 mm was tested at various heat fluxes and pressures. The flow was driven by mixed convection with strong buoyancy force owing to low mass flux and high heat flux. The experimental results shown that a "no wall temperature peak" heat transfer deterioration with an exactly large temperature difference between the tube and fluid occurred at high enthalpy region, which was especially different from the general deterioration phenomenon with a wall temperature peak occurred at normal mass flux in previous studies. Heat transfer in low mass flux was accompanied with a heat transfer enhancement phenomenon before the pseudo critical point and a deterioration after that. With increasing heat flux, the deterioration was strengthened, but the enhancement was little weakened and moved towards the low enthalpy region due to the combined effect of buoyancy and specific heat of fluid. The effect of pressure on heat transfer in various cases was different. Heat transfer was reduced with a rising pressure at low heat flux cases, but when heat flux became larger, heat transfer was enhanced with the increase of pressure. The parameters representing to buoyancy and thermal acceleration effects were also introduced respectively to explain the mechanism of heat transfer. Results shown the buoyancy effect and the distribution of large specific heat fluid were greatly responsible for the enhancement and the deterioration in heat transfer. While the effect of thermal acceleration on heat transfer in the present study could be neglected. © 2016 Association for Computing Machinery Inc. All Rights Reserved.

关键词： Buoyancy

来源：评论

学校读者我要写书评

暂无评论

Modelling of flame structure using thickened flame model coupled with multi-step reaction mechanism 11

Modelling of flame structure using thickened flame model cou...

引用

11th Asia-Pacific Conference on Combustion, ASPACC 2017

作者： Shilong, Guo Meng, Zhang Jinhua, Wang Zuohua, Huang State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

Thickened flame (TF) model is one of the effective methods to simulate combustion phenomenon. Theoretically, it could be extended to multi-step chemical reaction mechanism. However, the results in the present work shown that TF model coupled with multi-step mechanism will underestimate burnt gas temperature, whether in confined or unconfined space. Meanwhile, some post-flame species (CO, OH) concentration are overestimated, which means the decrease in burnt gas temperature is mainly caused by enhanced species diffusion. Dynamic thickened flame (DTF) model coupled with multi-step mechanism performs well for predicting species concentration and combustion state. So it is not recommended to use TF model coupled with a multi-step chemical reaction mechanism. However, the dynamically thickened flame thickness is obviously thinner than the theoretical expectations for the dynamic thickening factor, which is always used to determine thickening factor for a certain mesh size. The main heat release rate zone couldn’t be thickened as expected. A new DTF model used for multi-step reaction mechanism was proposed. The results show that it can both predict the flame structure accurately and get the flame thickness as expected. © 2018 Combustion Institute. All Rights Reserved.

关键词： Gas temperature

来源：评论

学校读者我要写书评

暂无评论

Time-resolved investigation of droplet size and velocity inside diesel fuel sprays 11

Time-resolved investigation of droplet size and velocity ins...

引用

11th Asia-Pacific Conference on Combustion, ASPACC 2017

作者： Feng, Zehao Zhang, Mingzhi Yang, Jiapei Tang, Chenglong Huang, Zuohua State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

To better understand the microscopic spray characteristics, measurements of temporal changes in the size and velocity of droplets inside diesel fuel sprays were conducted at a fixed measurement position of 40mm downstream from the injector tip. Particle/droplet image analysis (PDIA) system was applied to obtain the microscopic droplet images in a long time scale (0-10 ms) which consists of continuous injection stage (0-2.1 ms) and the spray free development stage (2.1-10 ms). The results show that the droplet size distribution has a significant variation at the beginning, but basically independent of time after 1.6 ms. The Sauter mean diameter (SMD) increases significantly at the continuous injection stage, but slightly decreases at the free development stage. In addition, it is observed that most droplets’ velocity are 2-3 m/s while the maximum value is 25 m/s. An interesting similar bimodal shape of velocity distribution probability curves was found at different time after start of injection. What’s more, the scalar velocities gradually decrease as time goes on, but the direction of the velocities is messy due to the air entrainment. © 2018 Combustion Institute. All Rights Reserved.

关键词： Velocity

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：