检索结果-内蒙古大学图书馆

13th International Conference on Fluidized Bed Technology, CFB 2021

作者： Yang, Dong Liang, Ziyu Dong, Le Zhou, Xihong Li, Juan State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Shaanxi Xi’an710049 China

ISBN: (纸本)9781771368506

Temperature safety analysis was conducted on the smooth tube of the supercritical circulating fluidized bed boiler through experiments, numerical simulation, and hydrodynamic calculation. The numerical simulation results of the inner wall temperature were compared with the results of the experiments and hydrodynamic calculation. Experimental results showed that heat transfer enhancement occurred near a pseudocritical point. Non-uniform circumferential heating weakened the buoyancy effect, which could effectively delay or prevent the occurrence of heat transfer deterioration, and the circumferential distribution of the wall temperature and heat flux was parabolic. The simulated results of the inner wall temperature were in satisfactory agreement with the experimental results. Furthermore, the inner wall temperature values of the hydrodynamic calculation were lower than the experimental values. These findings indicated that the temperature experimental results obtained by non-uniform circumferential heating were conservative. © 2021 CFB 2021 - Proceedings of the 13th International Conference on Fluidized Bed Technology. All rights reserved.

关键词： Heat flux

来源：评论

学校读者我要写书评

暂无评论

Study on supercritical water regeneration of bio-based activated carbon saturated with acid red G

引用

Carbon Resources Conversion 2024年

作者： Mu, Yaling Zhuang, Zitong Jiang, Kun Wei, Yimeng Meng, Anjun Jin, Hui State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shaanxi Xi'an710049 China CNNP CHD Hebei Nuclear Power Co. Ltd. Hebei Cangzhou061000 China

The dye and textile industry commonly employs activated carbon adsorption technology due to its cost-effectiveness and high efficiency. However, disposing of waste-activated carbon has a significant environmental and human health impact, and it's a huge economic waste. This study investigates the kinetic and isothermal adsorption characteristics of Acid Red G dye adsorption by Powdered Activated Carbon derived from coconut shells. To effectively reuse activated carbon and maximise resource conservation, regeneration experiments were carried out using Supercritical Water at 24 MPa and 400 ℃ for 30 min. The experimental results demonstrated that, in comparison with thermal regeneration, supercritical water possesses the benefits of environmental protection, economic efficiency and extensive applicability. This is of considerable importance to the field of research concerning the regeneration of activated carbon. © 2024

关键词： Carbon sequestration

来源：评论

学校读者我要写书评

暂无评论

A Novel Mass-Heat Exchange Network Analogy, Regression, and Synthesis Method for Mass Exchanger Networks

SSRN

引用

SSRN 2023年

作者： Xiao, Yuan Cui, Guomin Shanghai Key Laboratory Multiphase Flow and Heat Transfer in Power Engineering School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai20093 China

The mass exchanger network (MEN) synthesis is significant for material savings and pollution reduction in process industries. Considering its small magnitude and the concentration constraints, the optimized MEN configuration could easily violate the concentration constraints, leading to a reduction in the structural diversity during the optimization process compared to that of an heat exchanger network （HEN）of the same size. Moreover, the constraint on the mass transfer driving force based on the equilibrium composition might also have major effects on the optimization process. To address this, this paper presents a process-equipment-system analogy between the MEN and the HEN, proposing a novel mass-heat exchange network analogy, regression, and synthesis method. First, the generalized HEN was established by an analogy considering the MEN based on either the original or the equilibrium compositions. In this regard, a coordination coefficient was introduced to correct the deviation of the analogy relationship between the heat transfer and the mass transfer processes. Then, the generalized HEN was optimized by employing the random walk algorithm with compulsive evolution (RWCE). A regression method was proposed to regress the optimized HEN solution to the MEN expression, allowing the continuous optimization by the RWCE with finer parameters. The final optimal solution obtained is found to be lower than those reported in the literature with enhanced structural diversity, demonstrating the method’s effectiveness and providing new ideas for further synchronous optimization of combined heat and mass exchanger networks. © 2023, The Authors. All rights reserved.

关键词： Mass transfer

来源：评论

学校读者我要写书评

暂无评论

Heat and power Load Prediction for Combined Heat and power Station with Different Methods

Heat and Power Load Prediction for Combined Heat and Power S...

引用

Digital Twins and Parallel Intelligence (DTPI), IEEE International Conference on

作者： Lin Wang Tingting Yu Chen Chen Yaokui Gao Lin Gao Binbin Qiu Ming Liu Xi’an Thermal Power Research Institute Co. Ltd. Xi’an China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

ISBN: (数字)9798350349252

ISBN: (纸本)9798350349269

The accurate short-term load prediction is an essential prerequisite for ensuring the reliable and economic operation of combined heat and power stations. In this study, the heat load and power load prediction models of combined heat and power station were developed with long short-term memory (LSTM) and multiple linear regression (MLR), respectively. The preprocessing and correlation analysis of heat and power loads were conducted. The prediction effects of different prediction models were also compared and analyzed. Taking the data of February as an example, the mean absolute percentage error (MAPE) of heat load prediction with LSTM and MLR models are 3.20% and 3.75%, respectively, and the MAPE of power load prediction are 5.59% and 8.76%, respectively. The prediction results show that the performance of the LSTM model is better than that of the MLR model, and the prediction accuracy of the heat load is higher than that of the power load.

关键词： Correlation Accuracy Cogeneration Biological system modeling Linear regression Predictive models Data models Thermal loading Long short term memory Load modeling

来源：评论

学校读者我要写书评

暂无评论

Recent advancement and future challenges of photothermal catalysis for VOCs elimination:From catalyst design to applications

引用

Green Energy & Environment 2023年第3期8卷 654-672页

作者： Yang Yang Shenghao Zhao Lifeng Cui Fukun Bi Yining Zhang Ning Liu Yuxin Wang Fudong Liu Chi He Xiaodong Zhang Environment and Low-Carbon Research Center School of Environment and ArchitectureUniversity of Shanghai for Science and TechnologyShanghai 200093China College of Smart Energy Shanghai Jiao Tong UniversityShanghai 200240China Institute of Applied Biotechnology Taizhou Vocation&Technical CollegeTaizhou Zhejiang 318000China Department of Civil Environmentaland Construction EngineeringCatalysis Cluster for Renewable Energy and Chemical Transformations(REACT)NanoScience Technology Center(NSTC)University of Central FloridaOrlandoFL 32816United States State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power EngineeringXi'an Jiaotong UniversityXi'anShaanxi 710049China

Photothermal catalysis realizes the synergistic effect of solar energy and thermochemistry,which also has the potential to improve the reaction rate and optimize the *** this review,the research progress of photothermal catalytic removal of volatile organic compounds(VOCs)by nano-catalysts in recent years is systematically ***,the fundamentals of photothermal catalysis and the fabrication of catalysts are described,and the design strategy of optimizing photothermal catalysis performance is ***,the performance for VOC degradation with photothermal catalysis is evaluated and compared for the batch and continuous ***,the catalytic mechanism of VOC oxidation is systematically introduced based on experimental and theoretical ***,the future limitations and challenges have been discussed,and potential research directions and priorities are highlighted.A broad view of recent photothermal catalyst fabrication,applications,challenges,and prospects can be systemically provided by this review.

关键词： Photothermal catalysis VOCs Catalyst design Light-driven thermal catalysis Photothermal synergistic effect

来源：评论

学校读者我要写书评

暂无评论

Multi-physics analysis of the galvanic corrosion of Mg-steel couple under the influence of time-dependent anisotropic deposition film

引用

Journal of Magnesium and Alloys 2021年第3期9卷 866-882页

作者： Kai Wang Chenpei Li Yanhui Li Jinling Lu Yueshe Wang Xingqi Luo State Key Laboratory of Eco-hydraulics in Northwest Arid Region Xi'an University of TechnologyNo.5 Jinhua South RoadXi'an 710048China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityNo.28 Xianning West RoadXi'an 710049China

The anisotropic deposit film formed during the galvanic corrosion can impede the mass transfer of the involved species,thereby affecting the electro-chemical behavior and the evolution of galvanic *** limitations of experimental studies in the spatial-temporal scales restrict a deeper understanding of the corrosion mechanism,which can be complemented by numerical simulation.A multi-physics coupled model is proposed in this work to systematically investigate the temporal and spatial evolution of galvanic corrosion of the Mg-steel couple with the growing anisotropic deposition *** utilizing the multi-physics field coupled technique,various coupled physical-chemical processes underlying the corrosion behavior are built into the model,including chemical reactions,ionic mass transfer in the bulk solution and the deposition layer,interfacial reaction,deposition of corrosion products as well as the morphological transitions caused by metal dissolution and *** particular,the anisotropic deposit film is considered to be a porous layer with a porosity varying in time and space as the corrosion *** predicted corrosion morphology by this model is better than the previous *** coupled relationship between the electrochemical behavior(e.g.,electrode reaction kinetics,current density,surface potential)and the physical processes(e.g.,ionic transport,geometric evolution of metal surface and film interface)is *** results indicate that a porous deposition layer with a denser inner layer and a loose outer layer is generated,leading to more significant inhibition of mass transfer in the inner layer than the outer *** anisotropism of the deposition layer results in a non-uniform conductivity distribution and a discontinuous current density distribution in the *** current density on the electrode surface is inhibited by the deposition layer and the variation in the cathode/anode area ratio during the corrosion *** c

关键词： Galvanic corrosion Corrosion product film Modeling Mass transport Porosity

来源：评论

学校读者我要写书评

暂无评论

Influence of light-dark cycles on hydrogen production from sugarcane bagasse by Rhodobacter sphaeroides

引用

International Journal of Hydrogen Energy 2025年 145卷 28-35页

作者： Cao, Wen Wei, Xuan Lu, Jiyan Li, Mengyao Feng, Jiali State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shaanxi Xi'an710049 China College of Biology and Oceanography Weifang University Shandong Weifang261061 China Weifang Municipal Key Laboratory of Agricultural Planting Quantization and Application Shandong Weifang261061 China

Photo-fermentative hydrogen production from lignocellulosic biomass offers a clean, efficient, and eco-friendly alternative for energy generation. Large-scale photo-fermentative hydrogen production, ideally conducted under outdoor conditions is influenced by the daily light-dark cycle. This study examines the effect of a 12-h light-dark cycle (12L/12D) on hydrogen production by Rhodobacter sphaeroides HY01 using sugarcane bagasse (SCB), comparing it with continuous light (CL) conditions. The results show that bacterial growth was not significantly affected by the light-dark cycle. The optical density (OD660) of the culture reached 3.25 under 12L/12D and 3.49 under CL. However, total hydrogen yield decreased substantially under the light-dark cycle, from 6020.11 ± 54.71 mL/L in CL to 4242.73 ± 182.03 mL/L in the 12L/12D condition. Additionally, the rate of hydrogen production was higher under CL (119.78 ± 4.82 mL/(L·h)) compared to 12L/12D (60.97 ± 7.27 mL/(L·h)), while the lag phase was shorter under CL, at 17.25 ± 1.04 h, versus 20.37 ± 3.98 h under 12L/12D. Gas chromatography-mass spectrometry (GC-MS) analysis identified lactic acid, butyric acid, and ethanol as the primary soluble metabolites, with ethanol yield under 12L/12D being approximately half of that under CL. Notably, light conversion efficiency (LCE) for hydrogen production was significantly enhanced under the light-dark cycle, showing a 1.36-fold increase compared to CL conditions. These findings not only contribute to the understanding of the influence of light cycles on biohydrogen production but also support the development of more efficient and cost-effective biohydrogen systems for sustainable energy production. © 2025 Hydrogen Energy Publications LLC

关键词： Gas chromatography

来源：评论

学校读者我要写书评

暂无评论

Enhancing Vertical-Axis Tidal Turbines with Strategic Superhydrophobic Surfaces for Optimized Aerodynamic and Self-Starting Performances

SSRN

引用

SSRN 2024年

作者： Yin, Dawei Sun, Jinjing School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai200093 China Shanghai Key Laboratory of Power Energy in Multiphase Flow and Heat Transfer Shanghai200093 China

As observation and research on nature deepen, bionic and hydrophobic surface drag reduction are gaining increasing popularity among researchers. The application of bionic principles and hydrophobic surface technologies in the field of fluid dynamics has opened up new avenues for enhancing the performance of various engineering systems, including vertical-axis tidal turbines (VATTs). By mimicking the natural mechanisms observed in certain species, such as the lotus effect, researchers have been able to develop superhydrophobic surfaces (SHS) that significantly reduce drag in fluid ***, SHS have been applied uniformly across the entire surface of an airfoil. However, this study takes a more nuanced approach by investigating the impact of SHS application at different positions on the airfoil. Through numerical simulations, the study explores how varying the distribution of SHS can influence the power coefficient (Cp), a key performance metric for VATTs . The findings from the study are quite revealing. At a tip speed ratio (TSR) of 1.68, the study observes that applying SHS to 30% of the chord length near the leading edge of the airfoil yields the maximum relative power coefficient benefit, with an increase of up to 34.8%. This suggests that strategic placement of SHS can lead to significant performance improvements without the need for uniform application, which could potentially reduce material costs and maintenance requirements. Moreover, the study also finds that applying SHS only on the inner surface of the VATT can result in a 32% increase in the power coefficient. This indicates that the inner side of the airfoil, which experiences the higher pressure side of the fluid flow, is particularly sensitive to the drag reduction effects of SHS. The leading edge of the airfoil is another critical area where SHS application can have a substantial impact. The leading edge is the first point of contact between the airfoil and the fluid, and any reduc

关键词： Drag reduction

来源：评论

学校读者我要写书评

暂无评论

Hierarchically mesoporous carbon spheres coated with a single atomic Fe-N-C layer for balancing activity and mass transfer in fuel cells

引用

Carbon Energy 2022年第1期4卷 1-11页

作者： Chengyong Shu Qiang Tan Chengwei Deng Wei Du Zhuofan Gan Yan Liu Chao Fan Hui Jin Wei Tang Xiao-dong Yang Xiaohua Yang Yuping Wu School of Chemical Engineering and Technology Xi'an Jiaotong UniversityXi'anChina State Key Laboratory for Mechanical Behavior of Materials School of Material Science and EngineeringXi'an Jiaotong UniversityXi'anChina State Key Laboratory of Space Power-Sources Technology Shanghai Institute of Space Power SourcesShanghaiChina State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'anChina College of Materials Science and Engineering Huaqiao UniversityXiamenChina Institute of Quantum and Sustainable Technology(IQST) School of Chemistry and Chemical EngineeringJiangsu UniversityZhenjiangChina State Key Laboratory of Materials-Oriented Chemical Engineering School of Energy Science and Engineering and Institute of Advanced MaterialsNanjing Tech UniversityNanjingChina

Novel cost-effective fuel cells have become more attractive due to the demands for rare and expensive platinum-group metal(PGM)catalysts for mitigating the sluggish kinetics of the oxygen reduction reaction(ORR).The high-cost PGM catalyst in fuel cells can be replaced by earth-abundant transition-metalbased catalysts,that is,an Fe-N-C catalyst,which is considered one of the most promising ***,the performance of the Fe-N-C catalyst is hindered by the low catalytic activity and poor stability,which is caused by insufficient active sites and the lack of optimization of the triple-phase interface for mass ***,a novel Fe–N–C catalyst consisting of mono-dispersed hierarchically mesoporous carbon sphere cores and single Fe atom-dispersed functional shells are *** synergistic effect between highly dispersed Fe-active sites and well-organized porous structures yields the combination of high ORR activity and high mass transfer *** half-wave potential of the catalyst in 0.1M H_(2)SO_(4) is 0.82 V versus reversible hydrogen electrode,and the peak power density is 812 mW·cm^(−2) in H_(2)–O_(2) fuel ***,it shows superior methanol tolerance,which is almost immune to methanol poisoning and generates up to 162 mW·cm^(−2) power density in direct methanol fuel cells.

关键词： fuel cell hierarchically mesoporous carbon spheres oxygen reduction reaction single‐atom catalysts

来源：评论

学校读者我要写书评

暂无评论

Heat transfer behaviors of some supercritical fluids: A review

引用

Chinese Journal of Aeronautics 2022年第1期35卷 290-306页

作者： Gongnan XIE Xiaoxiao XU Xianliang LEI Zhouhang LI Yong LI Bengt SUNDEN School of Marine Science and Technology Northwestern Poly technical UniversityXi'an 710072China Key Laboratory of Low-grade Energy Utilization Technologies and Systems Chongqing UniversityChongqing 400044China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization Kunming University of Science and TechnologyKunming 650093China School of Mechanical Engineering Northwestern Polyteclwical UniversityXi'an 710072China Department of Energy Sciences Lund UniversitySE-22100 LundSweden

Supercritical fluids(e.g.,hydrocarbon fuels,water,carbon dioxide,and organic working medium,etc)have been recognized as working media to improve thermal efficiencies in power cycles and energy conversion,and have been used or selected as the working fluids in engineering fields such as aerospace,nuclear power,solar energy,refrigeration,geothermal energy,chemical technology,and so *** better understand the interesting characteristic or abnormal behaviors of supercritical fluids,most valuable research works(including experimental results and numerical studies)from domestic and abroad have been *** such,this paper presents a comprehensive review on heat transfer behaviors of some supercritical fluids in engineering *** review focuses on recently available articles published mainly from 2016 up to the present *** common problems(i.e.,heat transfer enhancement and heat transfer deterioration particularly for the supercritical hydrocarbon fuels)in the supercritical field are summarized and some perspectives on future prospects are also included.

关键词： Heat transfer behavior Supercritical fluids Thermo-physical property Turbulence model Working condition

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：